RESUMO

Purpose: This study examined the influence of a metal artifact reduction (MAR) tool, sharpening filters, and their combination on the diagnosis of vertical root fracture (VRF) in teeth with metallic posts using cone-beam computed tomography (CBCT). Materials and Methods: Twenty single-rooted human premolars - 9 with VRF and 11 without - were individually placed in a human mandible. A metallic post composed of a cobalt-chromium alloy was inserted into the root canal of each tooth. CBCT scans were then acquired under the following parameters: 8 mA, a 5×5 cm field of view, a voxel size of 0.085 mm, 90 kVp, and with MAR either enabled or disabled. Five oral and maxillofacial radiologists independently evaluated the CBCT exams under each MAR mode and across 3 sharpening filter conditions: no filter, Sharpen 1×, and Sharpen 2×. The diagnostic performance was quantified by the area under the receiver operating characteristic curve (AUC), sensitivity, and specificity. These metrics were compared using 2-way analysis of variance with a significance level of α=5%. Intra- and inter-examiner agreement were assessed using the weighted kappa test. Results: Neither MAR nor the application of sharpening filters significantly impacted AUC or specificity (P>0.05). However, sensitivity increased when MAR was combined with Sharpen 1× and Sharpen 2× (P=0.015). The intra-examiner agreement ranged from fair to substantial (0.34-0.66), while the inter-examiner agreement ranged from fair to moderate (0.27-0.41). Conclusion: MAR in conjunction with sharpening filters improved VRF detection; therefore, their combined use is recommended in cases of suspected VRF.

RESUMO

OBJECTIVE: To assess the impact of enhancement filters on the formation of halo artifacts in radiographs of dental implants obtained with a complementary metal oxide semiconductor (CMOS) system. METHODS: Digital radiographs of dental implants placed in dry human mandibles were processed with the Noise Reduction smoothing filter, as well as the Sharpen 1, Sharpen 4, and Sharpen UM high-pass filters available in the CLINIVIEW™ software (Instrumentarium Dental, Tuusula, Finland). Subjective analysis involved evaluating the left, right, and apical surfaces of each implant for the presence of much, few, or no halo. The objective analysis involved measurement of the halo area using the Trainable Weka Segmentation plugin (ImageJ, National Institutes of Health, Bethesda, MD, USA). Data were analyzed using Friedman's test (subjective analysis) and ANOVA (objective analysis) (α = 5%). RESULTS: In the subjective evaluation, the Sharpen 4 filter produced more radiographs with much halo present, and in the objective evaluation, a bigger halo area when compared to the original images and the Noise Reduction filter for all surfaces (p < 0.05). CONCLUSIONS: When evaluating dental implants, priority should be given to original images and those enhanced with smoothing filters since they exhibit fewer halo artifacts. CLINICAL RELEVANCE: Post-processing tools, such as enhancement filters, may improve the image quality and assist some diagnostic tasks. However, little is known regarding the impact of enhancement filters in halo formation on CMOS systems, which have been increasingly used in dental offices.

Assuntos

RESUMO

To assess the effect of digital enhancement on the image quality of radiographs obtained with photostimulable phosphor (PSP) plates partially damaged by ambient light. Radiographs of an aluminum step wedge were obtained using the VistaScan and Express systems. Half of the PSP plates was exposed to ambient light for 0, 10, 30, 60, or 90 s before being scanned. The resulting radiographs were exported with and without digital enhancement. Metrics for brightness, contrast, and contrast-to-noise ratio (CNR) were derived, and the ratio of each metric between the exposed-to-light and non-exposed-to-light halves of the radiographs was calculated. The resulting ratios of the radiographs with digital enhancement were subtracted from those without digital enhancement and compared among each other. For the VistaScan system, digital enhancement partially restored brightness, contrast, and CNR. For the Express system, digital enhancement only restored CNR and not the impact of ambient light on brightness and contrast. Specifically, digital enhancement restored 23.48% of brightness for the VistaScan, while percentages below 1% were observed for the Express. Digital enhancement restored 53.25% of image contrast for the VistaScan and 5.79% for the Express; 40.71% of CNR was restored for the VistaScan, and 35% for the Express. Digital enhancement can partially restore the damage caused by ambient light on the brightness and contrast of PSP-based radiographs obtained with the VistaScan, as well as on CNR for the VistaScan and Express systems. The exposure of PSP plates to light can lead to unnecessary retakes and increased patient exposure to X-rays.

RESUMO

BACKGROUND: There is no established protocol for the low doses of cone-beam computed tomography (CBCT) acquisition and filter application on the diagnosis of condylar morphological alterations. OBJECTIVES: The objective of the study was to evaluate the influence of voxel size and filter application on the diagnosis of condylar morphological alterations in CBCT using an ex vivo model. METHODS: CBCT scans of 36 temporomandibular joints were acquired using OP300 Maxio with voxel sizes of 0.085, 0.125 and 0.280 mm. Three radiologists evaluated the condyles in the CBCT volumes under three filter modes: no filter, '1x' sharpen filter and '2x' sharpen filter. The area under the ROC curve, sensitivity and specificity were calculated by comparing the evaluators' responses with the reference standard and compared among experimental groups using analysis of variance (ANOVA) (α = 5%). RESULTS: The area under the ROC curve, sensitivity and specificity were not affected by voxel size and filter application (p > .05). For osteophyte and flattening, there were more true-positive responses in smaller voxel size. For erosion, the increase of true- and false-positive responses occurred with a larger voxel size. Overall, there was a tendency to decrease true positives for osteophyte and erosion and increase false positives for flattening with the '2x' sharpen filter. CONCLUSIONS: The diagnosis of condylar morphological alterations assessed in this ex vivo analysis is not influenced by the voxel size and the application of the filters. However, attention is needed with the occurrence of false-positive diagnosis with a larger voxel size for erosion and '2x' sharpen filter for flattening.

Assuntos

RESUMO

OBJECTIVE: To assess the subjective image quality of original and manually enhanced radiographs acquired at different X-ray exposure times and using different digital systems. METHODS: A total of 500 radiographs obtained under 10 exposure times, 5 digital systems, and 2 enhancement conditions were assessed by 5 observers, who were asked to categorize each radiograph into acceptable or unacceptable. A radiograph was considered to be acceptable when at least four out of five observers found it acceptable. Descriptive analysis was used to summarize the outcomes and compare the subjective image quality of original and manually enhanced digital radiographs among different X-ray exposure times and digital systems. RESULTS: Express had six exposure times producing acceptable original images within a range from 0.063 to 0.4 s, followed by Digora Toto, which had five within a range from 0.063 to 0.32 s, Digora Optime, which had four within a range from 0.063 to 0.2 s,and SnapShot and VistaScan, which had 2 (0.2 and 0.32 s) and 1 (0.63 s), respectively. Image enhancement turned unacceptable images into acceptable ones in four digital systems: SnapShot at three exposure times, Digora Toto at two exposure times, Express at one exposure time, and VistaScan at four exposure times. CONCLUSION: Image enhancement based on brightness and/or contrast adjustments may be necessary to reveal the useful dynamic range of some digital radiographic systems and PSP-based systems may not necessarily have a wider range than sensor-based systems.

Assuntos

RESUMO

OBJECTIVE: To evaluate whether the automatic exposure compensation in the presence of high-density materials can affect the measurement of alveolar bone level. METHODS: Thirty regions of seven dry skulls and six mandibles were radiographed with and without a high-density material, using two digital radiographic technologies: photostimulable phosphor plate (PSP, Digora Optime) and sensor (CMOS, Digora Toto), totaling 120 images. The distances from the cement-enamel junction to the alveolar bone crest were measured using cone-beam computed tomography (CBCT) images to represent the reference standard. The same measurements of alveolar bone level and the average of the pixel values of the image were evaluated on the radiographs. Paired t test compared the average pixel values and alveolar bone-level measurements between images with and without high-density material. One-way analysis of variance compared the difference between radiographic and CBCT measurements (α = 0.05). RESULTS: The high-density material reduced the pixel values in PSP (p = 0.002) and CMOS (p < 0.001) technologies, demonstrating the AEC functioning in both technologies. There was no difference in bone-level measurements between the images without and with the high-density material for both technologies (p ≥ 0.091), or between the tomographic and radiographic measurements (p ≥ 0.319). CONCLUSION: In the presence of high-density material, the automatic exposure compensation reduces the average pixel values of the images (i.e., images get darker), but does not influence the radiographic measurements of alveolar bone level.

Assuntos

RESUMO

Abstract The aim of this study was to assess the use of digital dental radiology in Brazil, by focusing on the use of image receptors, imaging exams and digital image enhancement tools, also assessing the methods of professional image transfer. Questionnaires were distributed in person on dental meetings and digitally via messaging (WhatsApp®) and mailings list. The sample of this cross-sectional study consisted of 478 questionnaires. Most participants were woman (n=315, 65.9%), with average age of 33.8±9.2 years. Descriptive and frequency analysis was performed. Chi-square and Fisher's exact tests were used (α=0.05). Most dentists worked at shared dental clinics (34.7%) and use digital image receptors (51.1%), but a representative percentage (48.9%) still exclusively use radiographic films. Photostimulable phosphor plate is the most used digital image receptor. Among extraoral exams, panoramic radiography (PAN) is the most used. Regarding dental specialties, oral radiologists and oral and maxillofacial surgeons mostly use cone-beam computed tomography (p<0.001). Most dentists who use digital systems make use of digital image enhancement tools (87.8%), mainly contrast, zoom, brightness and measurements. The most common method of professional image transfer (professional-professional and professional-patiens) is by email, with few dentists using online app and social media (26%). Therefore, while most Brazilian dentists use digital imaging systems, a significant percentage still exclusively use radiographic films. The most extraoral imaging exams used is PAN. Regarding image enhancement tools, brightness and contrast adjustments, zoom and measurements are the most applied. Finally, dentists generally use email for professional image transfer.

Resumen El objetivo de este estudio fue evaluar uso de la radiología dental digital en Brasil, centrándose en uso de receptores de imagen, exámenes de imágenes y herramientas de mejora de imagen digital, evaluando también los métodos de transferencia de imagen profesional. Cuestionarios se distribuyeron de forma presencial en reuniones odontológicas y de forma digital a través de mensajería (WhatsApp®) y lista de correo. Muestra de este estudio transversal estuvo compuesta por 478 cuestionarios. Mayoría de los participantes eran mujeres (n=315, 65,9%), con edad promedio de 33,8±9,2 años. Se realizó un análisis descriptivo y de frecuencias. Se utilizaron las pruebas Chi-cuadrado y exacta de Fisher (α=0,05). La mayoría de los odontólogos trabajaban en clínicas dentales compartidas (34,7%) y utilizan receptores de imágenes digitales (51,1%), pero un porcentaje representativo (48,9%) todavía utiliza exclusivamente películas radiográficas. Placa de fósforo fotoestimulable es el receptor de imagen digital más utilizado. Entre los exámenes extraorales, la radiografía panorámica (PAN) es la más utilizada. En cuanto a las especialidades odontológicas, los radiólogos orales y los cirujanos orales y maxilofaciales utilizan mayoritariamente la tomografía computarizada de haz cónico (p<0,001). Mayoría de los odontólogos que utilizan sistemas digitales utilizan herramientas de mejora de imagen digital (87,8%), principalmente contraste, zoom, brillo y medidas. Método más común de transferencia de imágenes profesionales (profesional-profesional y profesional-pacientes) es por correo electrónico, con pocos dentistas que utilizan aplicaciones en línea y redes sociales (26%). Por lo tanto, mientras que la mayoría de dentistas brasileños utilizan sistemas de imágenes digitales, un porcentaje significativo aún utiliza exclusivamente películas radiográficas. Examen de imagen extraoral más utilizado es el PAN. En cuanto a las herramientas de mejora de imagen, los ajustes de brillo y contraste, el zoom y las medidas son las más aplicadas. Finalmente, los dentistas generalmente usan el correo electrónico para la transferencia de imágenes profesionales.

Assuntos

RESUMO

OBJECTIVES: To evaluate the influence of sharpening filters in the detection of root fractures using low-dose cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Eighty-four CBCT volumes acquired at three mA levels of 28 teeth inserted in the dental socket of dry human skull were selected from a previous study. The teeth were divided into four groups according to the presence and absence of root fracture and endodontic filling. Five radiologists evaluated all CBCT volumes for the presence of root fracture with and without the application of "Sharpen 1x" and "Sharpen 2x" filters in OnDemand3D software. Area under the ROC curve (AUC), sensitivity, specificity, and inter- and intra-observer concordance were calculated and compared (α = 0.05). RESULTS: Sharpening filters did not lead to significant differences in AUC, sensitivity, and specificity at the three mA levels tested (p > 0.05), regardless of the presence of endodontic filling (p > 0.05). However, the significant reduction of AUC observed in CBCT volumes at 4 mA without filter (p < 0.05) ceased to exist after the application of filters (p > 0.05). Sensitivity and specificity ranged from low and moderate. CONCLUSIONS: The use of sharpening filters can be recommended in CBCT volumes at 4 mA for root fracture detection for leading to the same performance as those at 6.3 and 10 mA. The presence of endodontic filling material did not influence the action of filters in the diagnosis of root fracture. CLINICAL RELEVANCE: Sharpening filters seem to contribute to the diagnosis of root fracture in CBCT volumes acquired with reduced radiation dose.

Assuntos

RESUMO

OBJECTIVES: To assess the dynamic range and enhancement ability of radiographs acquired with contemporary digital systems. METHODS: Five repeated periapical radiographs of human mandibles with an aluminium step-wedge were acquired using two sensor-based and three photostimulable phosphor plate-based systems and an X-ray unit at ten exposure times 0.020, 0.032, 0.063, 0.080, 0.100, 0.200, 0.320, 0.400, 0.500, and 0.630 s. All images had their brightness and contrast enhanced by two experienced oral and maxillofacial radiologists in consensus and were exported as both the original and enhanced file formats. Mean grey values were obtained from the aluminium steps and tabulated with their corresponding thicknesses for each exposure time, digital radiographic system, and file format. Images with saturated steps were excluded and the mean grey values from the remaining images were averaged to assess image brightness and the angular coefficient of the linear trendlines was generated from the relationship between mean grey values and their corresponding aluminium thicknesses to assess image contrast. Brightness and contrast values were compared using two-way ANOVA with post-hoc Tukey (α = 0.05). RESULTS: Photostimulable phosphor plate-based digital radiographic systems had a broader dynamic range. Longer exposure times produced original images with lower brightness and variable contrast (p < 0.05). Subjective enhancement significantly increased or reduced brightness and/or contrast in some systems (p < 0.05). CONCLUSIONS: Contemporary digital radiographic systems present different dynamic ranges and exposure-related brightness and contrast. Image enhancement may be a valuable tool at slightly suboptimal exposure times.

Assuntos

RESUMO

OBJECTIVES: This study aimed to evaluate the impact of enhancement filters in detecting small simulated internal root resorptions (IRR). METHODS:: Forty-two extracted human teeth were sectioned, connected, and stored in a dry human jaw and X-rayed with photostimulable phosphor plates (PSPs), composing the control group (CG). In the middle-third of the root canals, IRR lesions were simulated using Da Silveira protocol. Later, the specimens were X-rayed to create the test group (TG). All images acquired were exported with seven enhancement filters plus the original image. Three examiners used a five-point Likert scale to evaluate the images regarding the presence/absence of IRR. Diagnostic efficacy was assessed from sensitivity and specificity results. Comparison among filters was performed by using receiver operating characteristic (ROC) curve analysis. RESULTS:: Moderate values of Kappa interexaminer (0.403-0.620) and high values of Kappa intraexaminer (0.757-0.915) were observed. The best performance occurred in the CG (p < 0.05). Original images presented the greatest sensitivity and area under the ROC curve (0.595-0.750), while the Endo filter presented the greatest specificity (0.952). Inversion and Pseudo-3D images produced the greatest doubt in the diagnosis, significant for CG with the Pseudo-3D filter (p < 0.05). CONCLUSIONS:: The Original and 'Endo' filters should be chosen as it offers greater diagnostic ability and allows more confidence during the evaluation.

Assuntos

RESUMO

OBJECTIVE: To evaluate the diagnostic efficacy of the combined assessment of the original radiographic image with the Invert or Emboss digital enhancement filters in periapical radiographs obtained with different horizontal projection angles in the detection of simulated dental root fracture. MATERIALS AND METHODS: Thirty-four single-rooted teeth were selected, out of which 17 teeth were subjected to root fracture. Each tooth was individually placed in an empty socket of a dry human maxilla or mandible and X-rayed following the paralleling technique at three horizontal projections: mesial, right angle, distal. Then, the Invert and Emboss enhancement filters were applied. Five examiners independently evaluated all the images and rated the fractures using a 5-point scale. Weighted kappa test assessed the intra- and interexaminer agreements. Diagnostic values were calculated and the areas under the receiver operating characteristic curve (AUC) were compared using two-way ANOVA with Tukey test as post hoc (α = 0.05). RESULTS: The inter- and intraexaminer agreement ranged from moderate to almost perfect and from substantial to almost perfect, respectively. Diagnostic values were considerably high for all conditions with no significant difference between the AUC values (p > 0.05). CONCLUSIONS: The combined use of the original radiographic image with the Invert or Emboss digital enhancement filters in periapical radiographs obtained with different projection angles did not influence the detection of simulated dental root fracture.

Assuntos

RESUMO

Este estudo teve como objetivo comparar o efeito de 04 filtros de realce de imagem - Multi CDT NR1 e BAR1 - do software e-Vol DX (e-Vol DX, CDT, Brasil) e os filtros 1x e 2x do software Ondemand3D (CyberMed, Seoul, Republic of Korea), na quantificação de artefatos gerados por implantes dentários em imagens de tomografia computadorizada de feixe cônico (TCFC). Foram utilizadas imagens de TCFC de um phantom de mandíbula, adquiridas com variação do material do implante (titânio (Ti) e dióxido de zircônio (ZrO2)), região do implante (incisivo, canino, pré-molar e molar), tamanho do voxel (0,25 mm e 0,30mm) e posição do phantom no FOV (central, anterior, posterior, direita e esquerda). No software ImageJ em corte axial previamente definido, e usado como referência em cada um dos volumes estudados, em imagens com e sem a aplicação dos filtros, foi realizado a quantificação dos artefatos por um radiologista devidamente calibrado (ICC 0,97). Foram definidos grupos experimentais para as análises estatísticas das variáveis 02 a 02, sempre aliadas à variável filtro e seus efeitos na quantificação dos artefatos. Os testes de Shapiro-Wilk e de Bartlett, foram utilizados para avaliar a normalidade e homoscedasticidade. Para estudo das diferenças significativas entre os grupos foram utilizados os testes de ANOVA e Tukey (paramétricos), Kruskal-Wallis seguido de Conover-Iman (não paramétricos). Os resultados evidenciaram que o Ti apresentou menor quantificação em comparação ao ZrO2, nos 02 softwares. A menor quantificação de artefatos foi obtida no software e-Vol DX, filtro BAR 1, Ti e ZrO2. Não houve diferença significativa em relação ao tamanho do voxel para os materiais estudados (p=0,975 e p=0,901), posição do implante (p>0.05) e variações de posição no FOV (p>0.05). O Filtro Multi não apresentou diferenças significativas em relação às imagens sem filtro. Para os filtros do OnDemad3D, não houve diferença entre uso e não uso, independentemente do tamanho do voxel (p>0,05). Em conclusão o filtro BAR 1 apresentou-se como uma promissora ferramenta na redução dos artefatos oriundos de implantes dentários. (AU)

This study aimed to compare the effect of 04 image enhancement filters - Multi CDT NR1 and BAR1 - of the e-Vol DX software (e-Vol DX, CDT, Brazil) and the 1x and 2x filters of the Ondemand3D software (CyberMed, Seoul, Republic of Korea), in the quantification of artifacts generated by dental implants in cone beam computed tomography (CBCT) images. CBCT images of a mandible phantom were used, acquired with variation of the implant material (titanium (Ti) and zirconium dioxide (ZrO2)), implant region (incisor, canine, premolar and molar), voxel size (0.25 mm and 0.30 mm) and phantom position in the FOV (central, anterior, posterior, right and left). In the ImageJ software, in a previously defined axial section, and used as a reference in each of the volumes studied, in images with and without the application of filters, the quantification of the artifacts was performed by a properly calibrated radiologist (ICC 0.97). Experimental groups were defined for the statistical analysis of variables 02 to 02, always combined with the filter variable and its effects on the quantification of artifacts. The Shapiro-Wilk and Bartlett tests were used to assess normality and homoscedasticity. To study the significant differences between the groups, the ANOVA and Tukey tests (parametric), Kruskal-Wallis followed by Conover-Iman (non-parametric) were used. The results showed that Ti presented lower quantification compared to ZrO2, in the 02 softwares. The lowest quantification of artifacts was obtained using the e-Vol DX software, BAR 1, Ti and ZrO2 filters. There was no significant difference regarding voxel size for the materials studied (p=0.975 and p=0.901), implant position (p>0.05) and position variations in the FOV (p>0.05). The Multi Filter did not present significant differences in relation to the unfiltered images. For OnDemad3D filters, there was no difference between use and non-use, regardless of voxel size (p>0.05). In conclusion, the BAR 1 filter presented itself as a promising tool in the reduction of artifacts from dental implants (AU)

Assuntos

RESUMO

INTRODUCTION: This study assessed the influence of voxel size and filter application in detecting second mesiobuccal (MB2) canals in cone-beam computed tomographic (CBCT) images. METHODS: Using the OP300 CBCT system (Instrumentarium, Tuusula, Finland) and 3 voxel size protocols (80 µm, 125 µm, and 200 µm), we scanned 40 first molars: 20 with an MB2 canal and 20 without. All molars received silver palladium pins on the palatal root, whereas the non-MB2 molars were also filled with gutta-percha. Five oral radiologists assessed the presence of an MB2 canal under 3 filter application conditions: without filter, with sharpen 1 × filter, and with sharpen 2 × filter. Intra- and interobserver reproducibility was evaluated using the weighted kappa index. We compared the area under the receiver operating characteristic curves with SPSS Statistics v.20.0 (IBM Corp, Armonk, NY) using 2-way analysis of variance and the Tukey post hoc test with 5% significance level. RESULTS: Our analysis found median intra- and interobserver agreement values of 0.70 and 0.56, respectively. The 80-µm voxel with sharpen 1 × filter image group had the highest sensitivity, accuracy, and negative predictive values. As for specificity and positive predictive, the 80-µm voxel group without filter application presented the highest values. The areas under the receiver operating characteristic curve were higher in the 80-µm groups than in the 125-µm and 200-µm voxel size groups (P < .05). We found no differences among the filters used (P = .22) or for the filter-voxel size interactions (P = .88). CONCLUSIONS: A smaller voxel size increased the accuracy in detecting MB2 canals, whereas the enhancement filters did not.

Assuntos

RESUMO

OBJECTIVES: To present an image processing framework to improve the detection of vertical root fractures (VRFs) in digital periapical radiography. MATERIALS AND METHODS: Thirty endodontically treated human teeth (15 of them fractured with a metal post inserted into them, and 15 for the control) were enclosed in a dry mandible and radiographed individually. The proposed framework was applied to the raw data, as a preprocessing step, and was composed of four stages: geometric adjustment and negative, denoising, adaptive contrast enhancement, and gamma correction. The contrast-to-noise ratio (CNR) and sharpness of the image's VRF region were used for the objective evaluation of the method. In addition, five examiners evaluated the original and enhanced images, using a 5-point scale to assess confidence. RESULTS: The objective results showed that the proposed framework increased the CNR of the VRF region by 173% compared to the standard preprocessing method provided by the detector's manufacturer. The results found by the human observers indicated that the area under the curve (AUC) and sensitivity of the diagnosis of VRF significantly increased by 4% and 17% (p ≤ 0.05), respectively, when the examiners evaluated the image with the proposed method concomitantly with the image available in the commercial software. However, the specificity was reduced. CONCLUSIONS: The proposed image processing framework can be used as an additional tool to that provided by the manufacturer to increase the sensitivity and AUC of the diagnosis of VRF. CLINICAL RELEVANCE: The proposed method can be easily used in clinical practice to aid VRF detection, since it does not incur high computational costs and does not increase the radiation dose applied to the patient.

Assuntos

RESUMO

OBJECTIVES: To evaluate the effect of enhancement tools of intraoral digital radiographs on the assessment of vertical root fracture (VRF) and to quantify the resultant image noise. MATERIALS AND METHODS: Thirty single-rooted human teeth (15 control and 15 fractured) were each radiographed in four intracanal conditions: no filling, gutta-percha, metal post, and fiberglass post, totaling 120 original images. Two filters were applied to the original images-Sharpen filter (SF) and Edge Enhancement filter (EE), and brightness and contrast were adjusted in four combinations (B&C1 to 4), resulting in 840 images. Five oral radiologists analyzed the images for VRF detection. Pixel intensity was obtained in two regions from the radiographs. Diagnostic values were calculated and compared by two-way ANOVA, and the SD values of pixel intensity values were compared by one-way ANOVA (α = 0.05). RESULTS: There were no significant differences in accuracy for VRF detection between the experimental groups (p > 0.05). Teeth with metal post presented the lowest sensitivity (p < 0.05) for all experimental conditions, except for SF and EE (p > 0.05). B&C2, B&C3, and B&C4 had higher specificity than SF (p ≤ 0.05) for all intracanal conditions. Analysis of pixel intensity showed that all enhanced images presented statistically significant higher noise compared to those of the original images (p ≤ 0.05). CONCLUSION: Digital enhancement tools in digital radiography increase image noise; however, they can be used without compromising VRF detection. CLINICAL RELEVANCE: The use of digital enhancement does not impair the detection of VRF and, therefore, can be applied for this purpose according to the observer preference.

Assuntos

RESUMO

RESUMEN Fundamento: la evaluación del estado actual y de progresión de la gonartrosis necesita de métodos tanto clínicos como imagenológicos, estos últimos necesitan de entrenamiento, mayor tiempo y familiarización por parte del personal médico con la tecnología digital. Objetivo: mostrar dos métodos de medición del espacio articular tibiofemoral en pacientes con gonartrosis. Métodos: la búsqueda y análisis de la información se realizó en un periodo de 56 días (primero de noviembre de 2018 al 26 de diciembre de 2018) y se emplearon las siguientes palabras: tibiofemoral space measure AND knee osteoarthritis, knee joint space narrowing AND knee osteoarthritis, knee joint space width a partir de la información obtenida se realizó una revisión bibliográfica de un total de 272 artículos publicados en las bases de datos PubMed, Hinari, SciELO y Medline mediante el gestor de búsqueda y administrador de referencias EndNote, de ellos, se utilizaron 31 citas seleccionadas para realizar la revisión, 27 de los últimos cinco años. Resultados: se mencionan los métodos aplicables tanto en películas radiográficas convencionales y las de tipo digital. Se hace referencia a la vista radiográfica para la evaluación, gradación e interpretación del espacio articular tibiofemoral. Se exponen dos métodos de medición por pasos. Conclusiones: la medición del espacio tibiofemoral es importante para conocer el estado en que se encuentran los enfermos que padecen de gonartrosis, así como, determinar la respuesta desde el punto de vista imagenológico a diferentes modalidades de tratamiento aplicados tanto conservadores como quirúrgicos.

ABSTRACT Background: the assessment of the current status and progression of gonarthrosis needs both clinical and imaging methods, the last ones require from medical personnel training, more time and acquaintance with digital technology. Objective: to describe two methods to measure the tibiofemoral space in patients suffering knee osteoarthritis. Methods: the information search and analysis was carried out from November 1 to December 26, 2018. The search terms in PubMed, Medline, Hinari and Scielo databases using the EndNote software were: tibiofemoral space measure AND knee osteoarthritis, knee joint space narrowing AND knee osteoarthritis, and knee joint space width. A total of 272 articles were obtained, from which we selected 31, 27 of them from the last five years. Results: here we show that measuring methods of the tibiofemoral space can be done with plain radiographies and digital ones, and also the radiographic image for the assessment, grading and analysis of the tibiofemoral joint space. We described two methods of measurement step by step. Conclusions: the tibiofemoral space measurement is important to establish the status of patients with gonarthrosis, and to evaluate by means of imagenology the outcome of conservative and surgical treatments of the disease.

RESUMO

Abstract This study aims to assess the influence of high-density material on the radiographic diagnosis of proximal caries in digital systems with automatic exposure compensation, and to evaluate the effect of subjective adjustment of brightness and contrast to undertake this diagnostic task. Twenty bitewing radiographs of forty posterior human teeth with non-cavitated carious lesions, confirmed by micro-CT, were obtained with two digital systems. A porcelain-fused-to-metal crown attached to a titanium implant was inserted into the exposed area, and all the radiographs were repeated. Five radiologists assessed the radiographs and diagnosed proximal carious lesions. Afterwards, the observers were asked to adjust image brightness and contrast, based on their subjective perception, and to reassess the images. Thirty percent of each experimental group was reassessed to test intraobserver reproducibility, totaling 208 images per observer. Intraobserver and interobserver agreements ranged from fair to substantial. Sensitivity, specificity, predictive values, and area under the ROC curve were calculated and compared for each radiographic system, using ANOVA (α = 0.05). Overall, presence of high-density material and adjustment of brightness and contrast did not significantly influence the radiographic diagnosis of proximal caries (p ≥ 0.05). Regarding Digora Optime, adjustment of brightness and contrast significantly increased (p < 0.05) the diagnostic accuracy of proximal carious lesions in the presence of high-density material. In conclusion, the presence of high-density material in the X-rayed region does not influence radiographic diagnosis of proximal caries. However, when it is present in the X-rayed area, subjective adjustment of brightness and contrast is recommended for use with the Digora Optime digital system.

Assuntos

RESUMO

OBJECTIVE: To assess the influence of subjective enhancement of brightness and contrast of digital panoramic radiographs on the detection of soft tissue calcifications. MATERIALS AND METHODS: In this observational study, 500 digital panoramic radiographs were evaluated by two examiners in consensus, who scored the images for the presence of calcifications for each right and left side of the image. After 30 days, all images were revaluated under subjective manipulation of digital brightness and contrast. Calcifications were classified based on the diagnostic hypothesis: sialolith, tonsillolith, calcified atheroma, phlebolith, rhinolith, maxillary sinus antrolith, synovial chondromatosis, lymph node calcification, stylohyoid ligament, triticeous cartilage, or/and upper horn of thyroid cartilage calcification. For intra-examiner agreement, 20% of the sample was reevaluated. The Kappa test and McNemar test were used (α = 0.05). RESULTS: In original images, calcifications were observed in 44.2% of the patients, and in enhanced images, this number was 70.8%. Many calcifications were detected only in enhanced images, mainly in the diagnostic hypotheses of calcified atheroma and stylohyoid ligament. Intra-examiner agreement was excellent for the detection of soft tissue calcifications (0.82) and for the classification (0.81). CONCLUSION: Subjective enhancement of brightness and contrast alters the detection of soft tissue calcifications in digital panoramic radiograph.

Assuntos

RESUMO

RESUMEN Fundamento: las deformidades angulares de la rodilla son muy frecuentes en pacientes con artrosis, existen varios métodos de medición clínicos y radiográficos, con características propias. Objetivo: proponer un método de medición para la desviación angular de la rodilla que sea fácil y rápido. Métodos: la búsqueda y revisión de la información se realizó en un periodo de cuatro meses (primero de abril de 2018 al 30 de junio de 2018) y se emplearon las siguientes palabras: knee angular deformities, measurement of knee deformities, measures and knee angular deformities, a partir de la información obtenida se realizó una revisión bibliográfica de un total de 213 artículos publicados en las bases de datos PubMed, Hinari, SciELO y Medline mediante el gestor de búsqueda y administrador de referencias EndNote, de ellos se utilizaron 32 citas seleccionadas para realizar la revisión, 29 de los últimos cinco años. Desarrollo: se describen las características clínicas y radiográficas de los pacientes con desviación angular de la rodilla. En caso de las radiografías se hace referencia a la vista específica para la medición de esta deformidad. Se mencionan las ventajas y desventajas de los métodos de medición del eje mecánico y anatómico. Basados en la revisión de este tema, se propone un método de medición que puede ser llevado a cabo en radiografías digitales y películas. Conclusiones: el método propuesto es aplicable a nuestro medio y puede ser llevado a cabo en radiografías digitales y películas radiográficas.

ABSTRACT Background: knee angular deformities are common in patients suffering from osteoarthritis. There are many clinic and radiographic methods to measure knee deformities, each one has its own features. Objective: to propose an easy and quick method to measure angular knee deformities. Methods: a four month research was conducted from April 1st, 2018 to June 30th, 2018. It was included 213 articles published in PubMed, Hinari, SciELO and Medline databases using EndNote. The words used were knee angular deformities, measurement of knee deformities, measures and knee angular deformities. Thirty two citations were selected for the review, of them twenty nine within the last five years. Development: clinical and radiographic features in patients with angular deformities were described. Specific X-ray view features were pointed out to measure deformity. Advantages and disadvantages about mechanic and anatomic axis measures were mentioned. Based on literature review a new method is proposed to be used in digital and plain radiographic slides. Conclusions: the proposed measure method can be used in digital and plain radiographic slides at our health institutions.

RESUMO

OBJECTIVES: To evaluate the performance of periapical radiography assessed under different radiographic brightness and contrast variations in the detection of simulated internal (IRR) and external (ERR) root resorption lesions. Additionally, observers' preferences related to image quality for these diagnostic tasks were evaluated. METHODS: Thirty single-root teeth were divided into two groups (n = 15): IRR, in which lesions were simulated using mechanical and biochemical processes; and ERR, in which cavities standardized with drills of different sizes were performed on the root surfaces. Digital radiographs were obtained and subsequently adjusted in 4 additional combinations, resulting in 5 brightness/contrast variations (V1-V5). Five radiologists evaluated the radiographs. The observers' preference on the image quality was also recorded. RESULTS: For both conditions, there were no differences in the accuracy and specificity between the five brightness/contrast variations (p > 0.05), but the sensitivity for ERR was significantly lower in V4 (+ 15% brightness/-15% contrast) in the large size (p < 0.05). The observers classified V2 (- 15% brightness/+15% contrast) as the "best" image quality for IRR and ERR evaluation. CONCLUSIONS: For IRR and ERR lesions, brightness and contrast variation does not affect the diagnostic performance of digital intraoral radiography within the tested range. The observers prefer images with a reasonable decrease in brightness and increase in contrast. CLINICAL RELEVANCE: Brightness and contrast enhancement tools are commonly applied in digital radiographic assessment. The use of these tools for detection of root resorptions can be applied according to the observer preference without influence on diagnostic accuracy.

Assuntos