RESUMEN

Nanomechanical resonators can serve as ultrasensitive, miniaturized force probes. While vertical structures such as nanopillars are ideal for this purpose, transducing their motion is challenging. Pillar-based photonic crystals (PhCs) offer a potential solution by integrating optical transduction within the pillars. However, achieving high-quality PhCs is hindered by inefficient vertical light confinement. Here, we present a full-silicon photonic crystal cavity based on nanopillars as a platform for applications in force sensing and biosensing areas. Its unit cell consists of a silicon pillar with a larger diameter at its top portion than at the bottom, which allows vertical light confinement and an energy band gap in the near-infrared range for transverse-magnetic polarization. We experimentally demonstrate optical cavities with Q factors exceeding 103, constructed by inserting a defect within a periodic arrangement of this type of pillars. Each nanopillar naturally behaves as a nanomechanical cantilever, making the fabricated geometries excellent optomechanical (OM) photonic crystal cavities in which the mechanical motion of each nanopillar composing the cavity can be optically transduced. These geometries display enhanced mechanical properties, cost-effectiveness, integration possibilities, and scalability. They also present an alternative in front of the widely used suspended Si beam OM cavities made on silicon-on-insulator substrates.

RESUMEN

With the rapid development of mobile communication technology, the POI (piezoelectric on insulator) structure has gained recognition in the field of RF filtering. However, transverse modes remain in the passband of corresponding surface acoustic wave (SAW) devices, which impedes their application in crowded spectra. This article introduces a groove configuration to suppress transverse modes for POI SAW resonators employing a 50°YX-LiTaO3/SiO2/Si multilayered structure. First, the response of conventional POI SAW resonators was calculated by the 3D periodic FEM method, and the results indicate that transverse modes caused by energy leakage to busbar regions are serious in POI SAW resonators. Then, the groove configuration was adopted to confine energy within the aperture region by reducing the velocity at the end of IDT electrodes, and the groove dimension was optimized to achieve a nearly spurious-free response in the passband. Finally, experimental results of fabricated one-port SAW resonators with optimal groove configuration were provided to validate the suppression of transverse modes and the enhancement of the Q factor in the POI SAW resonator.

RESUMEN

Aggregation-induced emission (AIE) molecules have great potential to enhance the performance of micronano lasers due to their excellent aggregated luminescence properties, so it is valuable to expand their applications in micronano lasers. In this work, a typical AIE active fluorescent dye motif 9,10-bis(2,2-diphenylvinyl) anthracene (BDPVA) was selected as the gain medium. First, drop-casting was used to fabricate BDPVA single-crystal nanowires, which can be used as Fabry-Perot (FP)-type resonators with a lasing threshold of 49.4 µJ/cm2. Furthermore, we innovatively doped BDPVA molecules as gain mediums into external polymer Whispering-Gallery-Mode (WGM)-type resonators via the emulsion self-assembly method. Fabricated BDPVA-doped polystyrene (PS) microspheres exhibit a much lower lasing threshold of 9.04 µJ/cm2. These results prove that the BDPVA molecules, in addition to realizing the reported AIE single-crystal lasers, can also be used as a guest-doped gain medium in the resonant cavity for obtaining better fluorescence gain. In addition, multimode tunability of two types of lasers has been successfully achieved by tuning the structure of the resonant cavity. This work further expands the application potential of AIE materials and will provide a useful reference for the rational design and fabrication of photonic micronano laser components using AIE materials.

RESUMEN

Miniaturized reconstructive spectrometers play a pivotal role in on-chip and portable devices, offering high-resolution spectral measurement through precalibrated spectral responses and AI-driven reconstruction. However, two key challenges persist for practical applications: artificial intervention in algorithm parameters and compatibility with complementary metal-oxide-semiconductor (CMOS) manufacturing. We present a cutting-edge miniaturized reconstructive spectrometer that incorporates a self-adaptive algorithm referenced with Fabry-Perot resonators, delivering precise spectral tests across the visible range. The spectrometers are fabricated with CMOS technology at the wafer scale, achieving a resolution of ~2.5 nm, an average wavelength deviation of ~0.27 nm, and a resolution-to-bandwidth ratio of ~0.46%. Our approach provides a path toward versatile and robust reconstructive miniaturized spectrometers and facilitates their commercialization.

RESUMEN

Coupled nanomechanical resonators have unveiled fascinating physical phenomena, including phonon-cavity coupling, coupled energy decay pathway, avoided crossing, and internal resonance. Despite these discoveries, the mechanisms and control techniques of nonlinear mode coupling phenomena with internal resonances require further exploration. Here, we report on the observation of stochastic switching between the two resonance states with coupled 1:1 internal resonance, for resonant two-dimensional (2D) molybdenum disulfide (MoS2) nanoelectromechanical systems (NEMS), which is directly driven to the critical coupling regime without parametric pumping. We further demonstrate that the probability of state switching is linearly tunable from ∼0% to ∼100% by varying the driving voltage. Furthermore, we gradually increase the white noise amplitude and show that the probability of obtaining the higher-energy state decreases, and the stochastic switching phenomenon eventually disappears. The results provide insights into the dynamics of coupled NEMS resonators and open up new possibilities for sensing and stochastic computing.

RESUMEN

This paper proposes a high-sensitivity microstrip differential sensor for measuring the complex permittivity of liquids. The prototype of the differential sensor was formed by cascading two LC resonators on a microstrip transmission line based on stepped impedance. A strong electric field was found to be distributed in the circular patch of the LC resonator; therefore, a cylindrical micropore was set in the center of the circular LC resonator to measure the dielectric sample, which maximized the disturbance of the dielectric sample on the sensor. By optimizing the size of the circular LC resonator, a high-sensitivity sensor circuit was designed and manufactured. The complex permittivity of the test sample was calculated by measuring the transmission coefficient of different molar concentrations of ethanol-water solutions. The experimental results show that the designed differential sensor can accurately measure the complex permittivity of liquid materials with an average sensitivity of 0.76%.

RESUMEN

The introduction of metamaterials has provided new possibilities to manipulate the propagation of waves in different fields of physics, ranging from electromagnetism to acoustics. However, despite the variety of configurations proposed so far, most solutions lack dynamic tunability, i.e. their functionality cannot be altered post-fabrication. Our work overcomes this limitation by employing a photo-responsive polymer to fabricate a simple metamaterial structure and enable tuning of its elastic properties using visible light. The structure of the metamaterial consists of graded resonators in the form of an array of pillars, each giving rise to different resonances and transmission band gaps. Selective laser illumination can then tune the resonances and their frequencies individually or collectively, thus yielding many degrees of freedom in the tunability of the filtered or transmitted wave frequencies, similar to playing a keyboard, where illuminating each pillar corresponds to playing a different note. This concept can be used to realize low-power active devices for elastic wave control, including beam splitters, switches and filters.This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 2)'.

RESUMEN

Spin-mechanical coupling is vital in diverse fields including spintronics, sensing, and quantum transduction. Two-dimensional (2D) magnetic materials provide a unique platform for investigating spin-mechanical coupling, attributed to their mechanical flexibility and novel spin orderings. However, studying their spin-mechanical coupling presents challenges in probing mechanical deformation and thermodynamic property changes at the nanoscale. Here we use nano-optoelectromechanical interferometry to mechanically detect the phase transition and magnetostriction effect in multilayer CrSBr, an air-stable antiferromagnet with large magnon-exciton coupling. The transitions among antiferromagnetism, spin-canted ferromagnetism, and paramagnetism are visualized. Nontrivial magnetostriction coefficient 2.3 × 10-5 and magnetoelastic coupling strength on the order of 106 J/m3 have been found. Moreover, we demonstrate the substantial tunability of the magnetoelastic constant by nearly 50% via gate-induced strain. Our findings demonstrate the strong spin-mechanical coupling in CrSBr and pave the way for developing sensitive magnetic sensing and efficient quantum transduction at the atomically thin limit.

RESUMEN

In this paper, a microstrip Wilkinson power divider (MWPD) based on particle swarm optimization (PSO) algorithm is designed, simulated, and fabricated using novel resonators. In addition, attenuators and open-ended stubs are incorporated to generate a broad cut-off band and reduce unwanted harmonics. The proposed power divider has a central frequency of 1 GHz. The performance of each used resonator is analyzed based on lumped-element circuit models.The L and C parameters of the equivalent circuit of the used resonators are predicted and optimized with the assistance of the PSO method. The subsequent phase was the fabrication of the proposed MWPD, after which its performance was evaluated in the light of the results obtained from the simulation. It was discovered that there was a high degree of concordance between the two. On the other hand, the fabricated circuit has several benefits, including a suitable S12 of - 3.15 dB, a high return loss of less than - 24 dB at the operating frequency, a compact size of 0.058 λ g × 0.064 λ g , and the ability to remove undesired harmonics. The results show a high level of suppression of the unwanted harmonics (up to the 16th harmonic) and a great responsiveness in the passband, while having very low ripple. As a result, the proposed circuit may be used in a wide variety of electronic devices, such as radar transmitter and receiver circuits, and many other high-frequency systems.

RESUMEN

The confinement of waves in open systems represents a fundamental phenomenon extensively explored across various branches of wave physics. Recently, significant attention is directed toward bound states in the continuum (BIC), a class of modes that are trapped but do not decay in an otherwise unbounded continuum. Here, the theoretical investigation and experimental demonstration of the existence of quasi-bound states in the continuum (QBIC) for ultrasonic waves are achieved by leveraging an elastic Fabry-Pérot metasurface resonator. Several intriguing properties of the ultrasound quasi-bound states in the continuum that are robust to parameter scanning are unveiled, and experimental evidence of a remarkable Q-factor of 350 at ≈1 MHz frequency, far exceeding the state-of-the-art using a fully acoustic underwater system is presented. The findings contribute novel insights into the understanding of BIC for acoustic waves, offering a new paradigm for the design of efficient, ultra-high Q-factor ultrasound devices.

RESUMEN

Extremely low-frequency (ELF) electromagnetic (EM) waves adeptly propagate in harsh cross-medium environments, overcoming rapid decay that hinders high-frequency counterparts. Traditional antennas, however, encounter challenges concerning size, efficiency, and power. Here, drawing inspiration from nature, we present a groundbreaking piezo-actuated, bionic flapping-wing magnetic-dipole resonator (BFW-MDR), operating in the electro-mechano-magnetic coupling mechanism, designed for efficient ELF EM wave transmission. The unique rigid-flexible hybrid flapping-wing structure magnifies rotation angles of anti-phase magnetic dipoles by tenfold, leading to constructive superposition of emitted magnetic fields. Consequently, the BFW-MDR exhibits a remarkable quality factor of 288 and an enhanced magnetic field emission of 514 fT at 100 meters with only 6.9 mW power consumption, surpassing traditional coil antennas by three orders of magnitude. The communication rate is doubled by the ASK+PSK modulation method. Its robust performance in cross-medium communication, even amidst various interferences, underscores its potential as a highly efficient antenna for underwater and underground applications.

RESUMEN

The optimization of nanoscale optical devices and structures will enable the exquisite control of planar optical fields. Polariton manipulation is the primary strategy in play. In two-dimensional heterostructures, the ability to excite mixed optical modes offers an additional control in device design. Phonon polaritons in hexagonal boron nitride have been a common system explored for the control of near-infrared radiation. Their hybridization with graphene plasmons makes these mixed phonon polariton modes in hexagonal boron nitride more appealing in terms of enabling active control of electrodynamic properties with a reduction of propagation losses. Optical resonators can be added to confine these hybridized plasmon-phonon polaritons deeply into the subwavelength regime, with these structures featuring high quality factors. Here, we show a scalable approach for the design and fabrication of heterostructure nanodisc resonators patterned in chemical vapor deposition-grown monolayer graphene and h-BN sheets. Real-space mid-infrared nanoimaging reveals the nature of hybridized polaritons in the heterostructures. We simulate and experimentally demonstrate localized hybridized polariton modes in heterostructure nanodisc resonators and demonstrate that those nanodiscs can collectively couple to the waveguide. High quality factors for the nanodiscs are measured with nanoscale Fourier transform infrared spectroscopy. Our results offer practical strategies to realize scalable nanophotonic devices utilizing low-loss hybridized polaritons for applications such as on-chip optical components.

RESUMEN

Recently, plasmonic-based sensors operating in the terahertz frequency range have emerged as perspective tools for rapid and efficient label-free biosensing applications. In this work, we present a fully electronic approach allowing us to achieve state-of-the-art sensitivity by utilizing a near-field-coupled electronic sensor. We demonstrate that the proposed concept enables the efficient implementation and probing of a so-called ultra-strongly coupled sub-wavelength meta-atom as well as a single resonant circuit, allowing to limit the volume of material under test down to a few picoliter range. The sensor has been monolithically integrated into a cost-efficient silicon-based CMOS technology. Our findings are supported by both numerical and analytical models and validated through experiments. They lay the groundwork for near-future developments, outlining the perspectives for a terahertz microfluidic lab-on-chip dielectric spectroscopy sensor.

RESUMEN

In this paper, we propose a novel method for temperature measurement using surface acoustic wave (SAW) temperature sensors on curved or irregular surfaces. We integrate SAW resonators onto flexible printed circuit boards (FPCBs) to ensure better conformity of the temperature sensor with the surface of the object under test. Compared to traditional rigid PCBs, FPCBs offer greater dynamic flexibility, lighter weight, and thinner thickness, which make them an ideal choice for making SAW devices working for temperature measurements under curved surfaces. We design a temperature sensor array consisting of three devices with different operating frequencies to measure the temperature at multiple points on the surface of the object. To distinguish between different target points in the sensor array, each sensor operates at a different frequency, and the operating frequency bands do not overlap. This differentiation is achieved using Frequency Division Multiple Access (FDMA) technology. Experimental results indicate that the frequency temperature coefficients of these sensors are -30.248 ppm/°C, -30.195 ppm/°C, and -30.115 ppm/°C, respectively. In addition, the sensor array enables wireless communication via antenna and transceiver circuits. This innovation heralds enhanced adaptability and applicability for SAW temperature sensor applications.

RESUMEN

The volatile particles and molecules in our dry exhaled breath can reveal enormous information about the health of any person, such as the person's respiratory and metabolic functioning. Beyond the carbon dioxide level is an indicator of life, it provides important health-related data like people's metabolic rate. This study considers periodic open and closed resonators for measuring carbon dioxide concentration in dry exhaled breath. Transfer matrix and green methods are used to simulate the interaction between acoustic waves and the proposed sensor. The band gaps using the green method coincide with the transmittance spectra by the transfer matrix. The suggested sensor recorded a sensitivity of 5.3 H z . m - 1 . s , a figure of merit of 10,254 m - 1 . s , a detection limit of 5 × 10 - 6 m . s - 1 , and a quality factor of 3 × 10 6 . Furthermore, the efficiency shows that the proposed design is appropriate as a diagnostic sensor for different diseases such as chronic obstructive pulmonary. Besides, cylindrical-adapted sensors are urgently needed in medicine, industry, and biology because they can simultaneously be used for fluid transport and detection.

Asunto(s)

RESUMEN

Differential photoacoustic spectroscopy (DPAS) cells are usually excited on the first longitudinal ring mode, with a microphone situated in the middle of each of the two resonator tubes. However, it is known from other photoacoustic spectroscopy cell designs that connecting the microphones via a capillary can lead to signal enhancement. By means of finite element method (FEM) simulations, we compared such a photoacoustic spectroscopy (PAS) cell with a capillary to a DPAS cell with a capillary attached to each of the two resonators and showed that the behavior of both systems is qualitatively the same: In both the PAS and the DPAS cell, in-phase and anti-phase oscillations of the coupled system (resonator-capillary) can be excited. In the DPAS cell, capillaries of suitable length also increase the pressure signal at the microphones according to the FEM simulations. For different capillary diameters (1.2 mm/1.7 mm/2.2 mm), the respective optimal capillary length (36-37.5 mm) and signal amplification was determined (94%, 70%, 53%). According to the results of these FEM simulations, a significant increase in sensitivity can, therefore, also be achieved in DPAS cells by expanding them with thin tubes leading to the microphones.

RESUMEN

A review on planar printed structures that are based on Matryoshka-like geometries is presented. These structures use the well-known principle of Matryoshka dolls that are successively nested inside each other. The well-known advantages of the planar printed technology and of the meandered nested Matryoshka geometries are combined to generate miniaturized, multi-resonance, and/or wideband configurations. Both metal and complementary slot structures are considered. Closed and open configurations were analyzed. The working principles were explored in order to obtain physical insight into their behavior. Low-cost and single-layer applications as frequency-selective surfaces, filters, antennas, and sensors, in the microwave frequency region, were reviewed. Potential future research perspectives and new applications are then discussed.

RESUMEN

Flatband localization endowed with robustness holds great promise for disorder-immune light transport, particularly in the advancement of optical communication and signal processing. However, effectively harnessing these principles for practical applications in nanophotonic devices remains a significant challenge. Herein, we delve into the investigation of on-chip photonic localization in AB cages composed of indirectly coupled microring lattices. By strategically vertically shifting the auxiliary rings, we successfully introduce a magnetic flux of π into the microring lattice, thereby facilitating versatile control over the localization and delocalization of light. Remarkably, the compact edge modes of this structure exhibit intriguing topological properties, rendering them strongly robust against disorders, regardless of the size of the system. Our findings open up new avenues for exploring the interaction between flatbands and topological photonics on integrated platforms.

RESUMEN

We propose and study a nanoscale strong coupling effect between metamaterials and polymer molecular vibrations using metallic split-ring resonators (SRRs). Specifically, we first provided a numerical investigation of the SRR design, which was followed by an experimental demonstration of strong coupling between mid-infrared magnetic dipole resonance supported by the SRRs fabricated on a calcium fluoride substrate and polymethyl methacrylate molecular vibrations at 1730 cm-1. Characterized by the anti-crossing feature and spectral splitting behaviors in the transmission spectra, these results demonstrate efficient nanoscale manipulation of light-matter interactions between phonon vibrations and metamaterials.

RESUMEN

Achieving the simultaneity of ventilation and soundproofing is a significant challenge in applied acoustics. Ventilated soundproofing relies on the interplay between local resonance and nonlocal coupling of acoustic waves within a sub-wavelength structure. However, previously studied structures possess limited types of fundamental resonators and lack modifications from the basic arrangement. These constraints often force the specified position of each attenuation peak and low absorption performance. Here, we suggest the in-duct-type sound barrier with dual Helmholtz resonators, which are positioned around the symmetry-breaking waveguides. The numerical simulations for curated dimensions and scattered fields show the aperiodic migrations and effective amplifications of the two absorptive domains. Collaborating with the subsequent reflective domains, the designed structure holds two effective attenuation bands under the first Fabry-Pérot resonance frequency. This study would serve as a valuable example for understanding the local and non-local behaviors of sub-wavelength resonating structures. Additionally, it could be applied in selective noise absorption and reflection more flexibly.