RESUMEN

Reconstruction of bone defects or fractures caused by ageing, trauma and tumour resection is still a great challenge in clinical treatment. Although autologous bone graft is considered as gold standard, the source of natural bone is limited. In recent years, regenerative therapy based on bioactive materials has been proposed for bone reconstruction. Specially, numerous studies have indicated that bioactive ceramics including silicate and phosphate bioceramics exhibit excellent osteoinductivity and osteoconductivity, further promote bone regeneration. In addition, magnesium (Mg) element, as an indispensable mineral element, plays a vital role in promoting bone mineralisation and formation. In this review, different types of Mg-containing bioceramics including Mg-containing calcium phosphate-based bioceramics (such as Mg-hydroxyapatite, Mg-biphasic calcium phosphate), Mg-containing calcium silicate-based bioceramics (such as Mg2SiO4, Ca2MgSi2O7 and Mg-doped bioglass), Mg-based biocements, Mg-containing metal/polymer-bioceramic composites were systematacially summarised. Additionally, the fabrication technologies and their materiobiological effects were deeply discussed. Clinical applications and perspectives of magnesium-containing bioceramics for bone repair are highlighted. Overall, Mg-containing bioceramics are regarded as regenerative therapy with their optimised performance. Furthermore, more in-depth two-way researches on their performance and structure are essential to satisfy their clinical needs.

RESUMEN

PURPOSE: To assess the technical quality and clinical outcomes of non-surgical endodontic treatment of immature permanent incisor teeth with three different bioceramic plug materials and highlight variables which may influence treatment and quality outcomes. METHODS: This cross-sectional analysis forms part of a retrospective service evaluation of the technical quality and clinical outcome of orthograde root canal treatment carried out in the Paediatric Dentistry Department of Charles Clifford Dental Hospital (United Kingdom). Twenty-five cases were identified chronologically, using the electronic patient record system, for three bioceramic plug materials: Mineral Trioxide Aggregate (MTA), Biodentine, and TotalFill Putty. All radiographs were analysed using standard conditions. Intra- and inter-examiner agreement was calculated using Kappa and weighted Kappa tests. Data were collected using a data collection tool, entered into Microsoft Excel, and analysed using descriptive statistics, exploratory analysis with Chi-squared tests, and multivariable analyses (logistic regression). RESULTS: At 12-month review, the success rate for each apexification material was MTA (84%), Biodentine (88%), and TotalFill Putty (92%). MTA had the highest frequency of post-operative coronal discolouration, with Biodentine most associated with apical extrusion. A number of variables and trends that affect the clinical outcome were identified, including the presence of pre-operative resorption, the number of operators involved in treatment, the number of appointments to complete treatment, as well as how non-use of local anaesthetic during apical plug placement had no adverse effect on technical quality or clinical outcome. CONCLUSIONS: MTA, Biodentine, and TotalFill Putty are highly effective apexification materials which produce excellent clinical outcomes. As such, logistical and situational factors, such as continuity of care from operators with increased levels of experience, skill and ability, rather than material choice, may be more prognostic regarding the technical quality and clinical outcome of immature endodontic treatment. Further high-quality evidence is required.

RESUMEN

Cuttlefish bones are byproducts of cuttlefish processing and are readily available in the marine food industry. In this study, calcium phosphate bioceramics were prepared from cuttlefish bones using a two-stage hydrothermal calcination process. The results indicated that all bioceramics derived from cuttlefish bones had a higher degradation capacity, better bone-like apatite formation ability, and higher degree of osteogenic differentiation than commercially available hydroxyapatite. Notably, ß-tricalcium phosphate, which had the highest degree of Ca2+ and Sr2+ dissolution among the bioceramics extracted, can significantly upregulate osteogenic markers (alkaline phosphatase, osteocalcin) and stimulate bone matrix mineralization. Thus, it is a promising bioceramic material for applications in bone regeneration.

RESUMEN

The present study evaluated the cytocompatibility of three endodontic bioceramics in human periodontal-ligament-derived cells (hPDLCs): MTA Repair HP (HP), MTA Flow White (F), and Nishika Canal Sealer BG multi (BG). In addition, we also evaluated the effect of the powder-liquid (paste) ratio of F and BG on cytocompatibility. Discs of endodontic bioceramics (diameter = 8 mm, thickness = 1 mm) were prepared with HP, F, and BG. hPDLCs obtained from extracted teeth and cultured for three to five passages were used in the experiment. The prepared discs were placed at the bottom of a 48-well plate, seeded with hPDLCs at 100,000 cells/well, cultured for 7 or 28 days, and subjected to a 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide assay. hPDLCs cultured without any discs were used as a negative control (NC) group. Discs made of F or BG mixed in three different consistencies were also used in this experiment. The absorbance values at days 7 and 28 were high in the order of HP > NC > BG > F. Furthermore, F or BG with higher consistency showed higher absorbance values. MTA Repair HP had the highest cytocompatibility among the three materials. Furthermore, it also showed that higher consistency improved cytocompatibility.

RESUMEN

Osteoporotic bone defects are difficult to repair in elderly patients. This study aimed to repair osteoporotic bone defects using a combination of bone tissue engineering (BTE) and drug delivery systems (DDS). Herein, honeycomb granules (HCGs) composed of carbonate apatite microspheres were fabricated as BTE scaffolds. Each HCG possesses hexagonal macropores and abundant interconnected micropores between the microspheres. Owing to these multiscale interconnected pores, HCGs can readily contain antibodies against sclerostin (Scl), which causes imbalances in bone homeostasis. Anti-Scl antibody-loaded HCGs (Scl-Ab-HCGs) regulate the release of Scl-Abs in response to the pH of the osteoporotic environment. In ovariectomized rabbit osteoporotic femurs, HCG monotherapy forms new bone with less osteocyte damage (fewer empty bone lacunae) and fewer osteoclasts than osteoporotic bone; however, it is insufficient to prevent receptor activator of nuclear factor-kappa B ligand (RANKL) overexpression. Consequently, HCG monotherapy restores bone quantity better than no treatment but not to normal levels. In contrast, new bone tissue formed by Scl-Ab-HCG-based DDS predominantly expresses osteocalcin rather than RANKL, similar to normal bone, and shows a similar osteocyte apoptosis level, bone quantity, and osteoclast number as normal bone. Thus, Scl-Ab-HCG-based DDS is a promising approach for osteoporotic bone defect repair.

Asunto(s)

RESUMEN

OBJECTIVE: Intracanal medicaments, primarily calcium hydroxide, play a significant role in optimizing root canal disinfection. Recently, calcium silicate-based intracanal medicaments have emerged as potential alternatives. This scoping review sought to map the available evidence concerning the clinical and laboratory properties of these bioceramic medicaments. DATA: The study protocol was registered a priori (https://osf.io/rnyuv/) and a systematic search strategy using relevant MeSH terms was employed. SOURCES: The search was conducted across databases including the Cochrane Library, EMBASE, PubMed/MEDLINE, SciVerse Scopus, and Web of Science. STUDY SELECTION: Studies that investigated the clinical and laboratory properties of calcium silicate-based intracanal medicaments were included. CONCLUSIONS: Out of 1008 potentially relevant articles, 15 met the inclusion criteria. The majority of the studies came from Brazil, primarily focusing on Bio-C Temp (Angelus). The studies revealed acceptable biocompatibility, alkaline pH, and high calcium ion release. However, they showed reduced antibacterial activity compared to conventional calcium hydroxide formulations. Tooth discoloration beyond clinically acceptable thresholds was also a significant concern. A single clinical case report exhibited potential for periapical healing and root development, though this evidence is very limited. While current evidence is preliminary, high-quality clinical trials are essential to determine their clinical efficacy and safety in endodontic treatments. CLINICAL RELEVANCE: Calcium silicate-based intracanal medicaments have lower antibacterial activity and potential for tooth discoloration compared to conventional calcium hydroxide-based medicaments. Given the available evidence, they cannot be recommended for routine clinical practice.

Asunto(s)

RESUMEN

The failure of bone regeneration has been considered as a serious problem that troubling patients for decades, most of which was resulted by the poor angiogenesis and chronic inflammation after surgery. Among multiple materials applied in the repair of bone defect, silicate bioceramics attracted researchers because of its excellent bioactivity. The purpose of this study was to detect the effect of specific bioactive glass ceramic (AP40, based on crystalline phases of apatite and wollastonite) on angiogenesis and the subsequent bone growth through the modulation of macrophages. Two groups were included in this study: control group (macrophages without any stimulation, denominated as Control) and AP40 group (macrophages incubated on AP40). This study investigated the effect of AP40 on macrophages polarization (RAW264.7) and angiogenesis in vitro and in vivo. Additionally, the changes of angiogenic ability regulated by macrophages were explored. AP40 showed excellent angiogenesis potential and the expression of CD31 was promoted through the modulation of macrophages toward M2 subtype. Additionally, the macrophages incubated on AP40 synthesized more PDGF-BB comparing to macrophages without any stimulation, which contributed to the improved angiogenetic ability of human umbilical vein endothelial cells (HUVECs). Results of in vivo studies indicated increased bone ingrowth along the implants, which indicated the potential of bioceramics for bone defect repair clinically.

Asunto(s)

RESUMEN

Calcium hydroxide represents the most commonly used intracanal dressing between sessions; however, it may not be effective against all types of microorganisms. Several compounds of plant origin have attracted increasing attention from researchers in recent years. The objective of this study was to evaluate the cytocompatibility and antimicrobial activity of calcium hydroxide associated with the essential oil of Cyperus articulatus and the new bioceramic intracanal medicament Bio-C Temp®. Five experimental groups were designed: group Ca-C. articulatus essential oil; group CHPG-calcium hydroxide associated with propylene glycol; group CHCa-essential oil of C. articulatus associated with calcium hydroxide; and group U-UltraCal® XS; group BCT-Bio-C Temp®. The control group was a culture medium. Cytocompatibility was assessed by the methyltetrazolium (MTT) assay after exposure of the Saos-2 human osteoblast-like cell line to dilutions of commercial products/associations for 24 h and 72 h. The antimicrobial activity against mature Enterococcus faecalis biofilm was evaluated by the crystal violet assay. All commercial products/associations showed a cell viability similar to or even higher than the control group (p > 0.05) for both periods evaluated. C. articulatus essential oil associated or not with calcium hydroxide showed better antibiofilm capacity. C. articulatus associated or not with calcium hydroxide showed superior cytocompatibility and antimicrobial capacity, representing a promissory intracanal medicament.

RESUMEN

Introduction Endodontic implants, or didontic implants, offer a promising solution for stabilizing compromised teeth with a guarded prognosis and prolonging their clinical survival rate. Despite their potential benefits, they retired out of practice due to failures that arose from the lack of a biocompatible seal and engaging in dentin. Novel designs, based on evidence-based research with the help of bioceramics, present an opportunity to overcome these challenges and hence, enhance the clinical efficacy of endodontic implants. Thus the aim of this study is to design novel endodontic implants and evaluate their stress distribution in maxillary incisors using finite element analysis (FEA). Materials and methodology FEA is a biomechanical study to assess the stress distribution and extent of displacement to assess the clinical efficacy of novel endodontic implants in maxillary anterior teeth. Three 3D models (Model 1, Model 2, and Model 3) are designed to be meshed, and material elastic properties of the tooth and periapical tissues are applied. Boundary conditions were established, and a constant axial load value of 600 N was applied at a 45° angle. The FEA analysis was done under the loading conditions to assess the stress patterns for the three 3D models in comparison to the intact tooth on the ANSYS software (ANSYS Inc, Pennsylvania). Results FEA simulations revealed the distribution of stress within the tooth structure under functional occlusal forces, as Von Misses stresses were analyzed to assess the likelihood of material yielding and failure, which was comparable to that of an intact tooth. The maximum stress of deformation was as follows: intact: 1.7589e-5 MAX; Model 1: 3.3804e-6 MAX; Model 2: 2.638e-5 MAX; and Model 3: 2.1986e-5 MAX. The area of stress concentrations did not occur at the interface of the coronal or apical seal, which prevented catastrophic failures. Conclusion By leveraging advanced design principles and materials, these implants offer a promising alternative to traditional approaches, particularly in trauma cases with a poor prognosis for the survival of the teeth leading to loss of tooth. Further clinical studies are warranted to validate the efficacy and long-term success of these novel endodontic implants in diverse patient populations.

RESUMEN

The aim of this study is to provide an overview of the current state-of-the-art in the fabrication of bioceramic scaffolds for bone tissue engineering, with an emphasis on the use of three-dimensional (3D) technologies coupled with generative design principles. The field of modern medicine has witnessed remarkable advancements and continuous innovation in recent decades, driven by a relentless desire to improve patient outcomes and quality of life. Central to this progress is the field of tissue engineering, which holds immense promise for regenerative medicine applications. Scaffolds are integral to tissue engineering and serve as 3D frameworks that support cell attachment, proliferation, and differentiation. A wide array of materials has been explored for the fabrication of scaffolds, including bioceramics (i.e., hydroxyapatite, beta-tricalcium phosphate, bioglasses) and bioceramic-polymer composites, each offering unique properties and functionalities tailored to specific applications. Several fabrication methods, such as thermal-induced phase separation, electrospinning, freeze-drying, gas foaming, particle leaching/solvent casting, fused deposition modeling, 3D printing, stereolithography and selective laser sintering, will be introduced and thoroughly analyzed and discussed from the point of view of their unique characteristics, which have proven invaluable for obtaining bioceramic scaffolds. Moreover, by highlighting the important role of generative design in scaffold optimization, this review seeks to pave the way for the development of innovative strategies and personalized solutions to address significant gaps in the current literature, mainly related to complex bone defects in bone tissue engineering.

RESUMEN

Trimagnesium phosphate (TMP) bioceramic scaffolds are deemed as promising bone grafts, but their mechanical and biological properties are yet to be improved. In the study, strontium orthosilicate (SrOS) was used to modify the TMP scaffolds, whose macroporous structure was constructed by the filament deposition-type 3D printing method. The new phases of SrMg2(PO4)2 and Sr2MgSi2O7, which showed nanocrystalline topography, were produced in the 3D-printed TMP/SrOS bioceramic composite scaffolds. The compressive strength (1.8-64.1 MPa) and porosity (39.7%-71.4%) of the TMP/SrOS scaffolds could be readily tailored by changing the amounts of SrOS additives and the sintering temperature. The TMP/SrOS scaffolds gradually degraded in the aqueous solution, consequently releasing ions of magnesium, strontium and silicon. In contrast with the TMP scaffolds, the TMP/SrOS bioceramic scaffolds had profoundly higher compressive strength, and enhanced cell proliferative and osteogenic activities. The TMP/SrOS scaffolds incorporated with 5 wt% SrOS had the highest mechanical strength and beneficial cellular function, which made them promising for treating different sites of bone defects.

Asunto(s)

RESUMEN

Aim: Evaluation of the antibacterial and cytotoxic properties of TotalFill and NeoSEALER Flo bioceramic sealers compared to AH Plus resin sealer. Materials and Methods: Modified direct contact test was used on three sets of sealers: Freshly mixed sealers, sealers that were 1-day old, and sealers that were 7-day old. After 24 h of incubation, the colony-forming units were digitally counted using Promega Colony Counter after 30 and 60 min of exposure to Enterococcus faecalis. For cytotoxic effect evaluation, 3-(4,5-dimethylthiazol-2-yl)-2-5-diphenyltetrazolium bromide assay was performed at three different time points: 24 h, 48 h, and 120 h after adding the sealer eluates to human gingival fibroblasts, to assess cell viability. Data were analyzed using mixed model analysis of variance followed by post hoc test. Results: TotalFill bioceramic sealer showed the highest bacterial reduction against E. faecalis throughout all intervals. AH Plus showed great antibacterial activity initially which reduced drastically after 7 days. All the sealers showed a reduction in their antibacterial activity with time. TotalFill and NeoSEALER Flo showed very high cell viability in contrast to AH Plus. Conclusion: TotalFill and NeoSEALER Flo demonstrate superior antimicrobial properties against E. faecalis which reduces with time. TotalFill and NeoSEALER Flo demonstrate acceptable biocompatibility against human gingival fibroblasts, which decreased over time.

RESUMEN

The silver/magnesium doped hydroxyapatite (AgMgHAp, Ca10-x-yAgxMgy(PO4)6(OH)2, xAg=0.05 and yMg=0.02) nanocomposites coatings were deposited on Si substrate using the dip coating technique. The resulting coatings were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FTIR-ATR) spectroscopy, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The EDS analysis highlighted the presence of the constitutive elements of the silver/magnesium doped hydroxyapatite (AgMgHAp) nanocomposites coatings. The surface microtexture of the AgMgHAp was assessed by atomic force microscopy (AFM) technique. The AFM data suggested the obtaining of a uniform deposited layer comprised of equally distributed nanoconglomerates. FT-IR studies highlighted the presence of vibrational modes associated with the phosphate and hydroxyl groups. No bands associated with silver or magnesium were observed. The XPS analysis highlighted the presence of the constituent elements of hydroxyapatite (Ca 2p, P 2 s, O 1 s), as well as dopants (Ag 3d, Mg 1 s and Mg 2p). The antifungal evaluation of AgMgHAp coatings was carried out using the Candida albicans ATCC 10231 fungal strain. The results of the antifungal assay revealed that the AgMgHAp coatings exhibited a strong inhibitory antifungal activity. Furthermore, the data highlighted that the AgMgHAp inhibited the development of biofilm on their surface. The results revealed that the antifungal activity of the coating varied based on the duration of incubation. On the other hand, the data also showed that AgMgHAp nanocomposites coatings inhibited the fungal cell adhesion and development from the early stages of the incubation. In addition to morphological analysis, we additionally take advantage of AFM images to investigate and explore the domain of fractal and multifractal analysis applied to the films under evaluation. Our studies indicates that nanocomposite coatings made from AgMgHAp demonstrate strong antifungal properties. Our studies indicates that nanocomposite coatings made from AgMgHAp demonstrate strong antifungal properties. These results suggest the potential of AgMgHAp nanocomposite coatings as a promising solution for developing innovative antifungal devices in biomedical applications.

Asunto(s)

RESUMEN

The purpose of this study was to evaluate the repair process in rat calvaria filled with synthetic biphasic bioceramics (Plenum® Osshp-70:30, HA:ßTCP) or autogenous bone, covered with a polydioxanone membrane (PDO). A total of 48 rats were divided into two groups (n = 24): particulate autogenous bone + Plenum® Guide (AUTOPT+PG) or Plenum® Osshp + Plenum® Guide (PO+PG). A defect was created in the calvaria, filled with the grafts, and covered with a PDO membrane, and euthanasia took place at 7, 30, and 60 days. Micro-CT showed no statistical difference between the groups, but there was an increase in bone volume (56.26%), the number of trabeculae (2.76 mm), and intersection surface (26.76 mm2) and a decrease in total porosity (43.79%) in the PO+PG group, as well as higher values for the daily mineral apposition rate (7.16 µm/day). Histometric analysis presented material replacement and increased bone formation at 30 days compared to 7 days in both groups. Immunostaining showed a similar pattern between the groups, with an increase in proteins related to bone remodeling and formation. In conclusion, Plenum® Osshp + Plenum® Guide showed similar and sometimes superior results when compared to autogenous bone, making it a competent option as a bone substitute.

RESUMEN

Drawing on the structure and components of natural bone, this study developed Mg-doped hydroxyapatite (Mg-HA) bioceramics, characterized by multileveled and oriented micro/nano channels. These channels play a critical role in ensuring both mechanical and biological properties, making bioceramics suitable for various bone defects, particularly those bearing loads. Bioceramics feature uniformly distributed nanogrooves along the microchannels. The compressive strength or fracture toughness of the Mg-HA bioceramics with micro/nano channels formed by single carbon nanotube/carbon fiber (CNT/CF) (Mg-HA(05-CNT/CF)) are comparable to those of cortical bone, attributed to a combination of strengthened compact walls and microchannels, along with a toughening mechanism involving crack pinning and deflection at nanogroove intersections. The introduction of uniform nanogrooves also enhanced the porosity by 35.4 %, while maintaining high permeability owing to the capillary action in the oriented channels. This leads to superior degradation properties, protein adsorption, and in vivo osteogenesis compared with bioceramics with only microchannels. Mg-HA(05-CNT/CF) exhibited not only high strength and toughness comparable to cortical bone, but also permeability similar to cancellous bone, enhanced cell activity, and excellent osteogenic properties. This study presents a novel approach to address the global challenge of applying HA-based bioceramics to load-bearing bone defects, potentially revolutionizing their application in tissue engineering.

Asunto(s)

RESUMEN

The urgency to address skeletal abnormalities and diseases through innovative approaches has led to a significant interdisciplinary convergence of engineering, 3D printing, and design in developing individualised bioceramic bioscaffolds. This review explores into the recent advancements and future trajectory of non-antibiotic antibacterial bioceramics in bone tissue engineering, an importance given the escalating challenges of orthopaedic infections, antibiotic resistance, and emergent pathogens. Initially, the review provides an in-depth exploration of the complex interactions among bacteria, immune cells, and bioceramics in clinical contexts, highlighting the multifaceted nature of infection dynamics, including protein adsorption, immunological responses, bacterial adherence, and endotoxin release. Then, focus on the next-generation bioceramics designed to offer multifunctionality, especially in delivering antibacterial properties independent of traditional antibiotics. A key highlight of this study is the exploration of smart antibacterial bioceramics, marking a revolutionary stride in medical implant technology. The review also aims to guide the ongoing development and clinical adoption of bioceramic materials, focusing on their dual capabilities in promoting bone regeneration and exhibiting antibacterial properties. These next-generation bioceramics represent a paradigm shift in medical implant technology, offering multifunctional benefits that transcend traditional approaches.

RESUMEN

This study evaluated the effectiveness of three different irrigant activation techniques in cleaning and establishing patency during retreatment of root canals obturated with gutta-percha and bioceramic sealer. 60 extracted premolars with oval-shaped canals were instrumented and obturated with gutta-percha and EndosequenceBC sealer using the 'warm hydraulic condensation' technique. The teeth were retreated using Protaper Universal Retreatment and XP-Endo Shaper system and divided into four groups according to the irrigant activation protocol used: control, passive ultrasonic irrigation (PUI), Endovac irrigation (EVI) and XP-Endo Finisher R (XPFR). Apical patency was achieved in all the samples of the XPFR group (100%), which showed a significantly higher success rate compared with the control (73.3%) and EVI groups (73.3%) (p < 0.05). The scanning electron microscopic evaluation revealed significantly cleaner middle and apical third root canals in the PUI and XPFR groups compared with the control group (p < 0.05). These findings suggest that XPFR effectively cleans and establishes patency in root canals filled with bioceramic sealers.

RESUMEN

Reconstruction of craniomaxillofacial bone defects using 3D-printed hydroxyapatite (HA) bioceramic patient-specific implants (PSIs) is a new technique with great potential. This study aimed to investigate the advantages, disadvantages, and clinical outcomes of these implants in craniomaxillofacial surgeries. The PubMed and Embase databases were searched for patients with craniomaxillofacial bone defects treated with bioceramic PSIs. Clinical outcomes such as biocompatibility, biomechanical properties, and aesthetics were evaluated and compared to those of commonly used titanium or poly-ether-ether-ketone (PEEK) implants and autologous bone grafts. Two clinical cases are presented to illustrate the surgical procedure and clinical outcomes of HA bioceramic PSIs. Literature review showed better a biocompatibility of HA PSIs than titanium and PEEK. The initial biomechanical properties were inferior to those of autologous bone grafts, PEEK, and titanium but improved when integrated. Satisfactory aesthetic results were found in our two clinical cases with good stability and absence of bone resorption or infection. Radiological signs of osteogenesis were observed in the two clinical cases six months postoperatively. HA bioceramic PSIs have excellent biocompatible properties and imitate natural bone biomechanically and radiologically. They are a well-suited alternative for conventional biomaterials in the reconstruction of load-sharing bone defects in the craniomaxillofacial region.

RESUMEN

Aim and objective: The present case report aims to describe the nonsurgical management of an anterior tooth with a blunderbuss canal and an open apex using mineral trioxide aggregate (MTA) under magnification. Background: When pulp is traumatized before root formation, it results in pulpal necrosis, due to which dentin and root formation are interrupted. As a result, the canal remains broad due to thin and fragile dentin walls leading to the open apex. Therefore, root canal treatment is a big challenge currently. In such cases, we prefer MTA apexification to form the hard tissue apical barrier, which is a foreseeable treatment and has been used as another advanced method than calcium hydroxide (CaOH2) apexification due to its superior properties. Case description: A novel apexification technique was used by the Departments of Pediatric Dentistry and Conservative Dentistry and Endodontics for MTA placement in the central incisor with respect to 11 of a 9-year-old female patient. MTA was used to form an apical barrier using the micro-apical placement (MAP) system under a dental operating microscope (DOM). Following MTA hard set confirmation, obturation with bioceramic sealer and gutta percha with warm vertical condensation was done, followed by post-endodontic composite restoration. Conclusion: This case describes the nonsurgical management of an open apex using MTA, MAP system, magnification, and bioceramics, which aided in the management of this endodontic enigma. How to cite this article: Bhasin P, Saraf BG, Chauhan S, et al. The Successful Interdisciplinary Outcome of Blunderbuss Canal with an Open Apex Using MTA under Magnification: A Case Report. Int J Clin Pediatr Dent 2024;17(1):97-101.

RESUMEN

Context: Cytotoxicity and adaptability are among the highly imperative tests that should be performed on a novel endodontic material to ensure its successful implementation in endodontic treatment. Aims: Assess a recently introduced bioceramic root canal sealer CeramoSeal with TotalFill BC and AH plus sealers regarding the cytotoxicity and adaptability. Materials and Methods: Five sealer discs were prepared for each sealer and their extracts were cultured in 96-well plates containing human fibroblasts for 24 h. After their incubation, MTT solution was added to each well plate using an enzyme-linked immunosorbent assay plate reader was implemented to calculate the percentage of viable cells. Thirty mandibular single-rooted premolars were prepared using the Edge Endo rotary system, teeth were divided into three groups (n = 10) based on the sealer type: Group 1 CeramoSeal, Group 2 Totalfill, and Group 3 AH plus sealer. Teeth were sectioned longitudinally and viewed under a scanning electron microscope where the region with the gaps was identified and quantified as a percentage of the root canal's overall area. Statistical Analysis: One-way ANOVA test was used for cytotoxicity, while Kruskal-Wallis and Friedman's tests were used for adaptability. Results: Ceramoseal statistically significantly showed the lowest viability, at high concentrations AH plus showed the highest cell viability, while at lower concentration Totalfill BC sealer showed the highest cell viability percentage. The gap percentages were statistically significantly higher in Ceramoseal group, there was no statistically significant difference between AH Plus and Totalfill groups. Conclusions: Ceramoseal sealer exhibited the lowest viability and highest gap percentage compared to the other sealers.