RESUMO

Water and several chemicals, including dyestuffs, surfactants, acids, and salts, are required during textile dyeing processes. Surfactants are harmful to the aquatic environment and induce several negative biological effects in exposed biota. In this context, the present study aimed to assess acute effects of five surfactants, comprising anionic and nonionic classes, and other auxiliary products used in fiber dyeing processes to aquatic organisms Vibrio fischeri (bacteria) and Daphnia similis (cladocerans). The toxicities of binary surfactant mixtures containing the anionic surfactant dodecylbenzene sulfonate + nonionic fatty alcohol ethoxylate and dodecylbenzene sulfonate + nonionic alkylene oxide were also evaluated. Nonionic surfactants were more toxic than anionic compounds for both organisms. Acute nonionic toxicity ranged from 1.3 mg/L (fatty alcohol ethoxylate surfactant) to 2.6 mg/L (ethoxylate surfactant) for V. fischeri and from 1.9 mg/L (alkylene oxide surfactant) to 12.5 mg/L (alkyl aryl ethoxylated and aromatic sulfonate surfactant) for D. similis, while the anionic dodecylbenzene sulfonate EC50s were determined as 66.2 mg/L and 19.7 mg/L, respectively. Both mixtures were very toxic for the exposed organisms: the EC50 average in the anionic + fatty alcohol ethoxylate mixture was of 1.0 mg/L ± 0.11 for V. fischeri and 4.09 mg/L ± 0.69 for D. similis. While the anionic + alkylene oxide mixture, EC50 of 3.34 mg/L for D. similis and 3.60 mg/L for V. fischeri. These toxicity data suggested that the concentration addition was the best model to explain the action that is more likely to occur for mixture for the dodecylbenzene sulfonate and alkylene oxide mixtures in both organisms. Our findings also suggest that textile wastewater surfactants may interact and produce different responses in aquatic organisms, such as synergism and antagonism. Ecotoxicological assays provide relevant information concerning hazardous pollutants, which may then be adequately treated and suitably managed to reduce toxic loads, associated to suitable management plans.

Assuntos

RESUMO

Textile wastewater (TWW) is one of the most hazardous wastewaters for ecosystems when it is discharged directly into water streams without adequate treatment. Some organic pollutants, such as dyes in TWW, are considered refractory compounds that are difficult to degrade using conventional chemical and biological methods. The bicarbonate-activated peroxide (BAP) system is an advanced oxidation process (AOP) based on applying H2O2, which has been demonstrated to be a clean and efficient technology for dye degradation, with the advantage of operating under slightly alkaline pH conditions. In this study, response surface methodology (RSM) based on a central composite design (CCD) was used to optimize the degradation of TWW contaminated with the azo dye Acid Black 194 using the BAP system catalyzed with cobalt ions in solution (Co2+). The analysis of variance (ANOVA) technique was applied to identify significant variables and their individual and interactive effects on the degradation of TWW. The optimum reagent concentrations for degrading TWW at 25 °C and with 45 µM Co2+ were 787.61 and 183.34 mM for H2O2 and NaHCO3, respectively. Under these conditions, complete decolorization (≥99.40), 32.20 % mineralization, and 52.02 % chemical oxygen demand removal were achieved. Additionally, the acute toxicity of textile wastewater before and after oxidation was evaluated with guppy fish (Poecilia reticulata), showing a total reduction in mortality after treatment with the Co2+-BAP system. The Co2+-BAP oxidation system is a potential method for textile wastewater treatment, which, in addition to achieving complete decolorization and partial mineralization, improves biodegradability and reduces the toxicity of the treated water.

RESUMO

In this work, it is presented a first approach of a mathematical and kinetic analysis for improving the decoloration and further degradation process of an azo dye named acid red 27 (AR27), by means of a novel microbial consortium formed by the fungus Trametes versicolor and the bacterium Pseudomonas putida. A multivariate analysis was carried out by simulating scenarios with different operating conditions and developing a specific mathematical model based on kinetic equations describing all stages of the biological process, from microbial growth and substrate consuming to decoloration and degradation of intermediate compounds. Additionally, a sensitivity analysis was performed by using a factorial design and the Response Surface Method (RSM), for determining individual and interactive effects of variables like, initial glucose concentration, initial dye concentration and the moment in time for bacterial inoculation, on response variables assessed in terms of the minimum time for: full decoloration of AR27 (R1 = 2.375 days); maximum production of aromatic metabolites (R2 = 1.575 days); and full depletion of aromatic metabolites (R3 = 12.9 days). Using RSM the following conditions improved the biological process, being: an initial glucose concentration of 20 g l-1, an initial AR27 concentration of 0.2 g l-1 and an inoculation moment in time of P. putida at day 1. The mathematical model is a feasible tool for describing AR27 decoloration and its further degradation by the microbial consortium of T. versicolor and P. putida, this model will also work as a mathematical basis for designing novel bio-reaction systems than can operate with the same principle of the described consortium.

RESUMO

Waste derived from the textile industry can contain a wide variety of pollutants of organic and inorganic natures, such as dyes (e.g., acid, basic, reactive, mordant dyes) and toxic metals (e.g., lead, chromium, cadmium). The presence of pollutants at high concentrations in textile waste makes them relevant sources of pollution in the environment. To solve this problem, various technologies have been developed for the removal of pollutants from these matrices. Thus, adsorption emerges as an efficient alternative for textile waste remediation, providing advantages as simplicity of operation, economy, possibility of using different adsorbent materials, and developing on-line systems that allow the reuse of the adsorbent during several adsorption/desorption cycles. This review will initially propose an introduction to the adsorption world, its fundamentals, and aspects related to kinetics, equilibrium, and thermodynamics. The possible mechanisms through which a pollutant can be retained on an adsorbent will be explained. The analytical techniques that offer valuable information to characterize the solid phases as well as each adsorbate/adsorbent system will be also commented. The most common synthesis techniques to obtain carbon nano-adsorbents have been also presented. In addition, the latest advances about the use of these adsorbents for the removal of pollutants from textile waste will be presented and discussed. The contributions reported in this manuscript demonstrated the use of highly efficient carbon-based nano-adsorbents for the removal of both organic and inorganic pollutants, reaching removal percentages from 65 to 100%.

Assuntos

RESUMO

The textile industry is known for its large consumption of water, energy, and chemical products, making it one of the most environmentally impactful activities. To measure these environmental impacts, life cycle analysis (LCA) is a powerful tool that considers the entire process, from the extraction of raw materials to the finalization of textile products. In this context, this work aimed to present a systematic study on the use of the LCA methodology in the environmental assessment of effluents from the textile industry. The survey for data was carried out using the Scopus and Web of Science databases, and the PRISMA method was utilized for organizing and selecting of articles. During the meta-analysis phase bibliometric and specific data were extracted from selected publications. For the bibliometric analysis, a quali-quantitative approach was adopted, and the VOSviewer software was employed. The review encompasses a total of 29 articles, which were published between 1996 and 2023.The majority of the reviewed articles have shown the use of the LCA as a supportive tool for optimization focusing on sustainability, comparing the environmental, economic, and technical aspects through different approaches. The findings revel that China has the highest number of authors among the selected articles, while researchers from France and Italy had the highest number of international collaborations. The ReCiPe and CML methods were the most frequently used for evaluating life cycle inventories, with global warming, terrestrial acidification, ecotoxicity, and ozone depletion being the main impact categories. The use of activated carbon in textile effluents treatment has shown to be promising since it is environmentally friendly.

Assuntos

RESUMO

In this research, a combined photocatalytic and biological treatment is proposed for the elimination of pollutants present in textile wastewater using a natural erionite zeolite (PE) and aluminum oxide (PA) synthesized by the sol-gel method as photocatalysts, and solar radiation. Both catalysts were characterized by XRD, SEM, and EDS. For biological treatment two bacterial consortium were used: BC1 (Escherichia coli N16, Serratia k120, Pseudomonas putida B03 and Enterobacter hormaechei), and consortium BC2 (Escherichia coli N16, Serratia Mc107, Enterobacter N9, Enterobacter hormaechei Mc9). The photocatalytic and microbiological treatments were carried out initially separately and subsequently in a sequential manner, first the photocatalytic followed by the microbiological to determine if a synergistic effect was achieved. Comparing the photocatalytic performance, erionite showed higher performance of dyes degradation (54.75%) than alumina (28.62%). While in the biological process, BC1 decreased the dye concentration to 56.93% and BC2 to 53.56%. Finally, the best combined process was PA+BC1 reaching pollutants degradation 64.62%, showing that the application of both processes promotes a decolorization in textile wastewater. The water resulting from the combined photocatalysis-microbiological degradation processes was tested for toxicity using Daphnia magna, obtaining that none of the effluents shows toxicity.

RESUMO

Techniques using membranes for the treatment of wastewaters usually promote higher quality of treated water when compared to other processes. Among them, pervaporation has advantages in terms of selectivity in addition to low working pressure, which can prevent clogging problems. Polysulfone and polyurethane have complementary characteristics and are interesting in the context of membranes for industrial applications. In this sense, the aim of this work was to prepare and characterize polysulfone/polyurethane-based membranes and tested them with a simulated wastewater containing the reactive black dye and sodium chloride by pervaporation. In their manufacture, thermal treatment (at 60°C) and photo-radiation treatment (using ultraviolet light) were also applied. The characterizations were performed using different analytical tools. In general, it was possible to verify that all membranes have a dense layer. The thermal analysis allowed to define that the indicated working temperature is below 50°C. With respect to the simulated wastewater treatment, all membranes reached 100% selectivity. Concerning the saline solution, the mean selectivity was around 98.5%. Moreover, the permeate flow values were within the range presented by commercial membranes ranging from 1.6 to 2.4 kg m-2 h-1. Although for the photoirradiated membranes the photo-graft reaction has occurred, among all membranes, the blend without any treatment stood out from the others, presenting the highest permeate flow of the simulated wastewater. Finally, the results reveal that these membranes are capable of recovering wastewater from textile processes, in addition to having the potential to remove salts from water through the pervaporation process.Highlights Polysulfone/polyurethane-based membranes were not yet evaluated for wastewater recovery.Modifications in the membrane characteristics promoted variations in the permeate flow.Changes in physical-chemical properties of membrane as a result of a photoinitiation reaction.Removal efficiency achieved was 100% for reactive black dye and 98.5% for sodium chloride.A new way of performing pervaporation on the recovery of aqueous solutions.

Assuntos

RESUMO

The use of advanced oxidative processes (AOPs) is an efficient alternative for the treatment of textile wastewaters. The aim of this study was to assess the dye removal efficiency of a Fenton-based degradation process followed by a polishing step using biochar prepared from rice husk. Six recalcitrant textile dyes - Reactive Red 195 (D1), Synolon Brown S2 (D2), Orange Remazol RGB (D3), Yellow Synozol K3 (D4), Reactive Orange (D5), and Reactive Black 5 (D6) - were treated with Fenton and photo-Fenton processes (with and without biochar polishing) under optimized conditions. The results showed a general efficiency ranking: photo-Fenton + biochar ≈ Fenton + biochar > photo-Fenton ≈ Fenton. The Fenton process was also efficient for the regeneration of the dye-saturated biochar. The photo-Fenton + biochar process achieved the following color removal percentages: D1 (98.8%), D2 (99.7%), D3 (98.9%), D4 (96.3%), D5 (94.2%) and D6 (94.8%). This process was applied to a real conventionally-treated textile wastewater and analysis showed a reduction in BOD (87.5% degradation), COD (62.5% degradation) and color (93.5% mean removal). These results reveal the possibility for the reuse of the treated water for non-potable industrial uses, for example, floor washing or the cleaning of machines and toilet areas.

Assuntos

RESUMO

Since conventional processes for treating textile effluents have limitations, this work aimed to investigate the application of advanced oxidation technology in this type of matrix. Initially, for a textile dyes mixture in solution, the photo-Fenton/sunlight process proved to be the most efficient among other systems tested. During the tests it was found that the degradation kinetics depends of the pH and catalyst and oxidant concentrations. After 60 min under optimized conditions, the color was reduced by 98.19%, with 92.52% organic matter conversion. Ecotoxicity tests with the Lactuca Sativa vegetable indicated that the dyes were not totally oxidized to inert compounds, although the treated solution did not cause a significant toxic effect for this species. In the second stage of the research, the photodegradation in real samples of textile wastewater was evaluated. The efficiency of the photo-Fenton/sunlight process was lower than that obtained for the dyes solution, a fact attributed to the greater complexity of the real matrix. However, the data also indicated that the combination of coagulation/flocculation and advanced oxidation processes is the most suitable methodology to reduce the fraction of biodegradable compounds. In summary, research has revealed that photocatalytic degradation of dyes through advanced oxidation is an efficient treatment.

Assuntos

RESUMO

Wastewater discharge is a matter of concern as it is the primary source of water pollution. Consequently, wastewater treatment plays a key role in reducing the negative impact that wastewater discharge produce into the environment. Particularly, the effluents produced by textile industry are composed of high concentration of hazardous compounds such as dyes, as well as having high levels of chemical and biological oxygen demand, suspended solids, variable pH, and high concentration of salt. Main efforts have been focused on the development of methods consuming less water or reusing it, and also on the development of dyes with a better fixation capacity. However, the problem of how to treat these harmful effluents is still pending. Different treatment technologies have been developed, such as coagulation-flocculation, adsorption, membrane filtration, reverse osmosis, advanced oxidation, and biological processes (activated sludge, anaerobic-aerobic treatment, and membrane bioreactor). Concerning to biological treatments, even though they are considered as the most environmentally friendly and economic methods, their industrial application is still uncertain. On the one hand, this is due to the costs of treatment plants installation and, on the other, to the fact that most of the studies are carried out with simulated or diluted effluents that do not represent what really happens in the industries. Integrated treatment technologies by combining the efficiency two or more methodologies used to be more efficient for the decontamination of textile wastewater, than treatments used separately. The elimination of hazardous compounds had been reported using combination of physical, chemical, and biological processes. On this way, as degradation products can sometimes be even more toxic than the parent compounds, effluent toxicity assessment is an essential feature in the development of these alternatives. This article provides a critical view on the state of art of biological treatment, the degree of advancement and the prospects for their application, also discussing the concept of integrated treatment and the importance of including toxicity assays to reach an integral approach to wastewater treatment.

RESUMO

The present work aims to evaluate the treatment of the effluent from the textile industry via advanced oxidative processes of photo-Fenton assisted by different sources (natural sunlight, UV-A or visible LED lamps). To identify the best operating conditions, a factorial design was carried out for each process. It was observed that after the optimization of the processes, chemical oxygen demand (COD) removals greater than 88% were achieved. In addition, it was observed that the use of the LED lamp required lower reagent concentrations compared to solar and UV-A sources. A kinetic study was carried out under the best conditions obtained and it was observed that the sources showed rapid evolution, reaching a COD removal equilibrium with 30 min of reaction. Reagent monitoring was also carried out, and it was observed that they were not limiting to the reaction. Phytotoxicity analysis was also satisfactory since the treated effluents allowed a higher relative growth and germination index of the cucumber roots compared to the raw effluent. Finally, the cost analysis indicated that the use of LED lamps resulted in a reduction in electrical consumption compared to the UV-A lamp, as well as a reduction in the cost of reagents due to the lower concentration of reagents required compared to processes assisted by natural sunlight and UV-A.

Assuntos

RESUMO

Multilayer graphene oxide (mGO) was synthesized and functionalized via co-precipitation method to produce magnetic Fe3O4-functionalized multilayer graphene oxide nanocomposite (MmGO). Photocatalytic properties of MmGO were investigated in the photodegradation of raw textile wastewater samples. Fourier-transformed infrared spectroscopy revealed Fe-O vibrations, characterized by the band shift from 636.27 to 587.25 cm-1 on MmGO. X-ray diffraction confirmed the successful oxidation of graphite by the (002) peak at 10° and indicated the presence of Fe3O4 on MmGO surface by the peaks at 2θ 35.8° (311), 42.71° (400), 54.09° (511), and 62.8° (440). There was no detection of coercivity field and remnant magnetization, evidencing a material with superparamagnetic properties. Then, the textile effluent was treated by heterogeneous photo-Fenton (HPF) reaction. A 22 factorial design was conducted to evaluate the effects of MmGO dosage and H2O2 concentration on HPF, with color and turbidity removal as response variables. The kinetic behavior of the adsorption and HPF processes was investigated separately, in which, the equilibrium was reached within 60 and 120 min, for adsorption and HPF, respectively. Pseudo-second-order model exhibited the best fit, with COD uptake capacity at equilibrium of 4094.94 mg g-1, for chemical oxygen demand. The modeling of kinetics data showed that the Chan and Chu model was the most representative for HPF, with initial removal rate of 95.52 min-1. The removal of organic matter was 76.36% greater than that reached by conventional treatment at textile mills. The presence of Fe3O4 nanoparticles attached to MmGO surface was responsible for the increase of electron mobility and the enhancement of its photocatalytic properties. Finally, MmGO presented low phytotoxic to Cucumis sativus L. with a RGI of 0.53. These results bring satisfactory perspectives regarding further employment, on large scale, of MmGO as nanocatalyst of textile pollutants.

Assuntos

RESUMO

ß-Cyclodextrin (ß-CD) is an oligosaccharide composed of seven units of D-(+)-glucopyranose joined by α-1,4 bonds, which is obtained from starch. Its singular trunk conical shape organization, with a well-defined cavity, provides an adequate environment for several types of molecules to be included. Complexation changes the properties of the guest molecules and can increase their stability and bioavailability, protecting against degradation, and reducing their volatility. Thanks to its versatility, biocompatibility, and biodegradability, ß-CD is widespread in many research and industrial applications. In this review, we summarize the role of ß-CD and its derivatives in the textile industry. First, we present some general physicochemical characteristics, followed by its application in the areas of dyeing, finishing, and wastewater treatment. The review covers the role of ß-CD as an auxiliary agent in dyeing, and as a matrix for dye adsorption until chemical modifications are applied as a finishing agent. Finally, new perspectives about its use in textiles, such as in smart materials for microbial control, are presented.

Assuntos

RESUMO

This study proposes the treatment and valorization of denim textile effluents through a fermentative hydrogen production process. Also, the study presents the decolorizing capabilities of bacterial and fungal isolates obtained from the fermented textile effluents. The maximum hydrogen production rate was 0.23 L H2/L-d, achieving at the same time color removal. A total of thirty-five bacteria and one fungal isolate were obtained from the fermented effluents and screened for their abilities to decolorize indigo dye, used as a model molecule. From them, isolates identified as Bacillus BT5, Bacillus BT9, Lactobacillus BT20, Lysinibacillus BT32, and Aspergillus H1T showed notable decolorizing capacities. Lactobacillus BT20 reached 90% of decolorization using glucose as co-substrate after 11 days of incubation producing colorless metabolites. Bacillus BT9 was able to utilize the indigo dye as the sole carbon source achieving a maximum decolorization of 60% after 9 days of incubation and producing a red-colored metabolite. In contrast, Bacillus BT5 and Lysinibacillus BT32 exhibited the lowest percentages of decolorization, barely 33% after 16 and 11 days of incubation, respectively. When Aspergillus H1T was grown in indigo dye supplemented with glucose, 96% of decolorization was reached after 2 days. This study demonstrates the valorization of denim textile effluents for the production of hydrogen via dark fermentation with concomitant color removal.

Assuntos

RESUMO

Amino-functionalized multilayer graphene oxide (Am-nGO) has been synthesized and applied to remove the reactive drimaren red (DR) from aqueous solutions. Infrared spectroscopy evidenced amine and amide presence by peaks at 1579 cm-1 and a band between 3300 and 3500 cm-1. Raman spectroscopy showed an increment in ID/IG ratio after amino-Fe3O4-functionalization of nGO from 1.05 to 1.20, referent to an increase in sp3 domain disorder. The isoelectric point of Am-nGO was pH 8.1. From kinetic study, the equilibrium was achieved within 90 min; moreover, pseudo-n-order model satisfactorily fitted to the experimental data. Kinetic constant (kn) was 0.71 mg1-n g1-n min-1 and modeled equilibrium sorption capacity (qe) 219.17 mg g-1. Equilibrium experiments showed monolayer adsorption capacity (qm) of 219.75 mg g-1, and BET model best fitted to the equilibrium data, indicating that the adsorption process happened with multiple layers formation. From sorption thermodynamics, the standard free energy of Gibbs and enthalpy were respectively - 31.91 kJ mol-1 (at 298 K) and 66.43 kJ mol-1. Such data evidence the spontaneous and chemical behavior of DR adsorption as a consequence of strong electron donor-receptor interactions between the dye and the nanosorbent. By phytotoxicity assessment, Am-nGO showed inexpressive inhibitory potential to American lettuce seeds in comparison with its precursor nGO and graphite nanoplatelets.

Assuntos

RESUMO

The dyes used in textile industries are usually difficult to degrade in aquatic environments, being highly toxic to micro fauna and flora. Thus, textile wastewater treatments have been developed, among them, one that stands out is adsorption process. With the rise of nanomaterials applied to adsorption, graphene oxide (GO) shows promise in the removal of dyes. This work aimed to produce a more economical and environmentally friendly GO by reducing H2SO4 concentration during the synthesis. Adsorption tests were performed with methylene blue (MB) and brilliant blue (BB), adsorbent regeneration tests, as well as a kinetic study using real wastewater, and toxicological assays with lettuce seeds. Results showed that the sample produced with less H2SO4 (GO-21) performed better for MB (99% removal) and BB (29% removal); and recycling test showed that despite the decrease in removal efficiency, it remained high in the first cycles. Kinetics showed that equilibrium was reached in 30 min, removing 67.43% of color and 90.23% of the effluent's turbidity. Phytotoxicity assays indicated that the wastewater treated with GO-21 was the least toxic, compared to other wastewater samples analyzed. Therefore, GO has demonstrated its potential to be an effective and less toxic option to treat textile effluents.[Formula: see text].

Assuntos

RESUMO

In this work, waste expanded polystyrene (WEPS) was irradiated with gamma rays, ranging doses from 100 kGy to 1,000 kGy. After irradiation, the WEPS had decrease on its glass transition temperature (Tg), as consequence of the scissions of its polymer chains. Then, the irradiated WEPS was sulfonated, and its degree of sulfonation (DS) was measured. The highest DS value, 46.6%, was obtained for an irradiation dose of 200 kGy. The sulfonated and irradiated polystyrene (denominated as iS-WEPS), was used as a support of iron oxide nanoparticles. Such composite system was denominated (FeO-NPs + iS-WEPS). The results show nanoparticle sizes of 31.5 nm containing 21.97% iron oxide. The composites followed a pseudo-second order model, with a maximum adsorption capacity of 20 mg/g, and an equilibrium time of 30 min, according to the Langmuir model. Moreover, the optimal conditions followed by the Fenton process were: pH = 3.2, H2O2 concentration = 0.32 mM/L, composite concentration (FeO-NPs + iS-WEPS) = 2 g/L, and a reaction time 20 min. Finally, 99% removal of indigo carmine dye was achieved, and a reduction of 83% of COD in textile wastewater.

RESUMO

A Fenton like advanced oxidation process (AOP) employing scrap zerovalent iron (SZVI) and hydrogen peroxide (H2O2) was studied for industrial textile wastewater treatment from a textile manufacturing plant located at Medellín, Colombia (South America). The wastewater effluent studied contains a mixture of organic compounds resistant to conventional treatments. The effect of initial pH and SZVI concentration and H2O2 concentration were studied by a response surface methodology (RSM) Box-Behnken design of experiment (BBD). The combined SZVI/H2O2 process led to reductions of 95% color, 76% of chemical oxygen demand (COD) and 71% of total organic carbon (TOC) at optimal operating conditions of pH = 3, SZVI = 2000 mg/L and [H2O2] = 24.5 mM. Molecular weight distribution measurement (MWD), ultraviolet-visible (UV-Vis) spectroscopy, HPLC, biodegradability and toxicity were used to characterize the pollutants after the treatment process finding that the resulting effluent was polluted mostly by low molecular weight carboxylic acids. A remarkable biodegradability enhancement of the effluent was evidenced by a BOD5/COD ratio increase from 0.22 to 0.4; also, the SZVI/H2O2 process successfully reduced the toxicity from 60% to 20% of dead A. Salina crustaceans.

Assuntos

RESUMO

Textile industry wastewater has become a cause of concern to environmentalists due to its toxic composition and the difficulty of breaking down certain dyes. In this study, modified fish scales of Sardinella brasiliensis (SSb) were used as an alternative for a low-cost adsorbent to remove dyes from textile wastewaters. Adsorption efficiency was assessed by measuring the general, kinetic, and thermodynamic physico-chemical parameters of adsorption isotherms, using Reactive Turquoise Blue 15 (RTB15) and Reactive Red 120 (RR120) dyes as adsorbate models, as local textile industries commonly use these dyes. The isothermal data from the batch experiments were inserted in the Langmuir, Freundlich, and Langmuir-Freundlich (SIPS) equations; the Langmuir isotherm equation showed the most appropriate. The thermodynamic parameters showed that adsorption of dyes by the modified SSb adsorbent was an endothermic yet spontaneous process in the case of RR120. Sorbent-based on SSb material was concluded as adsorbing both of the tested dyes. Because of its abundant availability, and the small amount of activation needed to turn it into an adsorbent, this biowaste can be employed as a low-cost alternative for removal of dyes in the treatment of textile wastewater.

Assuntos

RESUMO

Azo dyes, common in textile wastewater, have high photolytic and chemical stabilities, which make them difficult to be removed using conventional treatments. This study aims to evaluate a combined process using heterogeneous photocatalysis, with ZnO/UV or TiO2 /UV (0.6 g catalyst L-1 solution/2-hr UV radiation), and a biological process for textile wastewater treatment. After the proposed treatments, the color and organic matter removals from synthetic wastewater (SW) and industrial wastewater (IW) were evaluated. For SW, the coupled photocatalytic (ZnO/UV or TiO2 /UV)-biological system promoted a high extent of color removal (98%) and total organic carbon (TOC) reduction (>80%). Promising results were obtained with IW using combined photocatalytic (TiO2 /UV)-biological treatments, reaching 97% and 63% of color and TOC removal, respectively. This process, coupling heterogeneous photocatalysis and a bioprocess, has proved to be a good alternative for the treatment of textile wastewater, not only for color removal but also for dye mineralization purposes. PRACTITIONER POINTS: A combined process using heterogeneous photocatalysis (ZnO/UV or TiO2 /UV) and biological process was evaluated for synthetic (SW) and industrial (IW) textile wastewaters treatment. For SW, coupled process promoted high extent of colour and organic matter removals. For IW, promising results were obtained with TiO2 /UV-biological treatment (97% of colour and 63% of organic matter removals).

Assuntos