RESUMEN

A type of copper-nanocluster-polymer composites is reported and showcased that their 3D nanolattices exhibit a superior combination of high strength, toughness, deformability, resilience, and damage-tolerance. Notably, the strength and toughness of ultralight copper-nanocluster-polymer nanolattices in some cases surpass current best performers, including alumina, nickel, and other ceramic or metallic lattices at low densities. Additionally, copper-nanocluster-polymer nanolattices are super-resilient, crack-resistant, and one-step printed under ambient condition which can be easily integrated into sophisticated microsystems as highly effective internal protectors. The findings suggest that, unlike traditional nanocomposites, the laser-induced interface and the high fraction of ultrasmall Cu15 nanoclusters as crosslinking junctions contribute to the marked nonlinear elasticity of copper-nanocluster-polymer network, which synergizes with the lattice-topology effect and culminates in the exceptional mechanical performance.

RESUMEN

Ultralow-k materials used in high voltage devices require mechanical resilience and electrical and dielectric stability even when subjected to mechanical loads. Existing devices with organic polymers suffer from low thermal and mechanical stability while those with inorganic porous structures struggle with poor mechanical integrity. Recently, 3D hollow-beam nanolattices have emerged as promising candidates that satisfy these requirements. However, their properties are maintained for only five stress cycles at strains below 25%. Here, we demonstrate that alumina nanolattices with different relative density distributions across their height elicit a deterministic mechanical response concomitant with a 1.5-3.3 times higher electrical breakdown strength than nanolattices with uniform density. These density-variant nanolattices exhibit an ultralow-k of ≈1.2, accompanied by complete electric and dielectric stability and mechanical recoverability over 100 cyclic compressions to 62.5% strain. We explain the enhanced insulation and long-term cyclical stability by the bi-phase deformation where the lower-density region protects the higher-density region as it is compressed before the higher-density region, allowing to simultaneously possess high strength and ductility like composites. This study highlights the superior electrical performance of the bi-phase nanolattice with a single interface in providing stable conduction and maximum breakdown strength.

RESUMEN

This article investigated the magnetic properties of a 2D nanolattice through computer modeling. A square antidote nanolattice in thin films was considered. For our computer simulation, we used the Heisenberg model. Ferromagnetic phase transition was studied for lattices with pores of various sizes. We determined the Curie temperature based on the finite-dimensional scaling theory. Using Wolf's algorithm, we simulated the behavior of the system. The dependence of the phase transition temperature on the density of spins was found to be power. Using Metropolis' algorithm, we calculated a hysteresis loop for an antidote lattice film. The hysteresis loop narrowed as the pore sizes increased. The dependence of coercive force on the size of the nanolattice obeyed the logarithmic law.

RESUMEN

Structural versatility and multifunctionality of biological materials have resulted in countless bioinspired strategies seeking to emulate the properties of nature. The nanostructured egg case of swell sharks is one of the toughest permeable membranes known and, thus, presents itself as a model system for materials where the conflicting properties, strength and porosity, are desirable. The egg case possesses an intricately ordered structure that is designed to protect delicate embryos from the external environment while enabling respiratory and metabolic exchange, achieving a tactical balance between conflicting properties. Herein, structural analyses revealed an enabling nanolattice architecture that constitutes a Bouligand-like nanoribbon hierarchical assembly. Three distinct hierarchical architectural adaptations enhance egg case survival: Bouligand-like organization for in-plane isotropic reinforcement, noncylindrical nanoribbons maximizing interfacial stress distribution, and highly ordered nanolattices enabling permeability and lattice-governed toughening mechanisms. These discoveries provide fundamental insights for the improvement of multifunctional membranes, fiber-reinforced soft composites, and mechanical metamaterials.

Asunto(s)

Nanoestructuras , Tiburones , Animales , Permeabilidad , Porosidad

RESUMEN

The dielectric reliability of low-k materials during mechanical deformation attracts tremendous attention, owing to the increasing demand for thin electronics to meet the ever-shrinking form factor of consumer products. However, the strong coupling between dielectric/electric and mechanical properties limits the use of low-k dielectrics in industrial applications. We report the leakage current and dielectric properties of a nanolattice capacitor during compressive stress cycling. Electrical breakdown measurements during the stress cycling, combined with a theoretical model and in situ mechanical experiments, provide insights to key breakdown mechanisms. Electrical breakdown occurs at nearly 50% strain, featuring a switch-like binary character, correlated with a transition from beam bending and buckling to collapse. Breakdown strength appears to recover after each cycle, concomitant with nanolattice's shape recovery. The compressive displacement at breakdown decreases with cycling due to permanently buckled beams, transforming the conduction mechanism from Schottky to Poole-Frankel emission. Remarkably, our capacitor with 99% porosity, k ∼ 1.09, is operative up to 200 V, whereas devices with 17% porous alumina films breakdown upon biasing based on a percolation model. Similarly with electrical breakdown, the dielectric constant of the capacitor is recoverable with five strain cycles and is stable under 25% compression. These outstanding capabilities of the nanolattice are essential for revolutionizing future flexible electronics.

RESUMEN

Mechanical metamaterials with three-dimensional micro- and nanoarchitectures exhibit unique mechanical properties, such as high specific modulus, specific strength, and energy absorption. However, a conflict exists between strength and recoverability in nearly all the mechanical metamaterials reported recently, in particular the architected micro/nanolattices, which restricts the applications of these materials in energy storage/absorption and mechanical actuation. Here, we demonstrated the fabrication of three-dimensional architected composite nanolattices that overcome the strength-recoverability trade-off. The nanolattices under study are made up of a high-entropy alloy-coated (14.2-126.1 nm in thickness) polymer strut (approximately 260 nm in the characteristic size) fabricated via two-photon lithography and magnetron sputtering deposition. In situ uniaxial compression inside a scanning electron microscope showed that these composite nanolattices exhibit a high specific strength of 0.027 MPa/kg m3, an ultrahigh energy absorption per unit volume of 4.0 MJ/m3, and nearly complete recovery after compression under strains exceeding 50%, thus overcoming the traditional strength-recoverability trade-off. During multiple compression cycles, the composite nanolattices exhibit a high energy loss coefficient (converged value after multiple cycles) of 0.5-0.6 at a compressive strain beyond 50%, surpassing the coefficients of all the micro/nanolattices fabricated recently. Our experiments also revealed that, for a given unit cell size, the composite nanolattices coated with a high entropy alloy with thickness in the range of 14-50 nm have the optimal specific modulus, specific strength, and energy absorption per unit volume, which is related to a transition of the dominant deformation mechanism from local buckling to brittle fracture of the struts.

RESUMEN

Low dielectric constant (low-k) materials have gained increasing popularity because of their critical role in developing faster, smaller, and higher performance devices. Their practical use has been limited by the strong coupling among mechanical, thermal, and electrical properties of materials and their dielectric constant; a low-k is usually attained by materials that are very porous, which results in high compliance, that is, silica aerogels; high dielectric loss, that is, porous polycrystalline alumina; and poor thermal stability, that is, Sr-based metal-organic frameworks. We report the fabrication of 3D nanoarchitected hollow-beam alumina dielectrics which k is 1.06-1.10 at 1 MHz that is stable over the voltage range of -20 to 20 V and a frequency range of 100 kHz to 10 MHz. This dielectric material can be used in capacitors and is mechanically resilient, with a Young's modulus of 30 MPa, a yield strength of 1.07 MPa, a nearly full shape recoverability to its original size after >50% compressions, and outstanding thermal stability with a thermal coefficient of dielectric constant (TCK) of 2.43 × 10-5 K-1 up to 800 °C. These results suggest that nanoarchitected materials may serve as viable candidates for ultra low-k materials that are simultaneously mechanically resilient and thermally and electrically stable for microelectronics and devices.

RESUMEN

Recent advancements with the directed assembly of block copolymers have enabled the fabrication over cm2 areas of highly ordered metal nanowire meshes, or nanolattices, which are of significant interest as transparent electrodes. Compared to randomly dispersed metal nanowire networks that have long been considered the most promising next-generation transparent electrode material, such ordered nanolattices represent a new design paradigm that is yet to be optimized. Here, through optical and electrical simulations, we explore the potential design parameters for such nanolattices as transparent conductive electrodes, elucidating relationships between the nanowire dimensions, defects, and the nanolattices' conductivity and transmissivity. We find that having an ordered nanowire network significantly decreases the length of nanowires required to attain both high transmissivity and high conductivity, and we quantify the network's tolerance to defects in relation to other design constraints. Furthermore, we explore how both optical and electrical anisotropy can be introduced to such nanolattices, opening an even broader materials design space and possible set of applications.

RESUMEN

To harness "smaller is more ductile" behavior emergent at nanoscale and to proliferate it onto materials with macroscale dimensions, we produced hollow-tube Cu60Zr40 metallic glass nanolattices with the layer thicknesses of 120, 60, and 20 nm. They exhibit unique transitions in deformation mode with tube-wall thickness and temperature. Molecular dynamics simulations and analytical models were used to interpret these unique transitions in terms of size effects on the plasticity of metallic glasses and elastic instability.