RESUMO

The use of dwarf plants in tomato breeding has provided several advantages. However, there are no identified dwarf plants (dd) containing the self-pruning habit (spsp). The aim of this work was to obtain future generations, characterize the germplasm, and select potential dwarf plants with a determinate growth habit to obtain Salad-type lines. The work was started by carrying out hybridization, followed by the first, second, and third backcrosses. Once F2BC3 seeds became available, the introgression of the self-pruning gene (spsp) into dwarf plants (dd) began. Three strains of normal architecture and a determinate growth habit were hybridized with two strains of dwarf size and an indeterminate growth habit, thus yielding four hybrids. Additionally, donor genotype UFU MC TOM1, the commercial cultivar Santa Clara, and the wild accession Solanum pennellii were used in the experiment. Agronomic traits, fruit quality, metabolomics, and acylsugars content were evaluated, and dwarf plants with a determinate growth habit were selected. Hybrid 3 exhibited the highest yields. Visual differences between determinate and indeterminate dwarf plant seedlings were observed. It is suggested to carry out five self-pollinations of the best dwarf plant determined and subsequent hybridization with homozygous lines of normal plant architecture and determinate growth habit to obtain hybrids.

RESUMO

This study presents an approach that utilizes low-value agro-industrial by-products as culture media for producing high-value proteolytic enzymes. The objective was to assess the impact of six agro-industrial by-products as culture media on the production of proteolytic enzymes. Bacillus subtilis strains, confirmed through comprehensive biochemical, morphological, and molecular analyses, were isolated and identified. Enzymatic activity was evaluated using azocasein and casein substrates, and the molecular sizes of the purified extract components were determined. The results demonstrated that the isolated bacteria exhibited higher metabolic and enzymatic activity when cultured in media containing 1 % soybean oil cake or feather meal. Furthermore, higher concentrations of the culture media were found to hinder the production of protease. Optimal protease synthesis on soybean oil cake and feather meal media was achieved after 4 days, using both the azocasein and casein methods. Semi-purification of the enzymatic extract obtained from Bacillus subtilis in feather meal and soybean oil cake resulted in a significant increase in azocaseinolytic and caseinolytic activities. Gel electrophoresis analysis revealed multiple bands in the fractions with the highest enzymatic activity in soybean oil cake, indicating the presence of various enzymes with varying molecular sizes. These findings highlight the potential of utilizing low-value agro-industrial by-products as efficient culture media for the sustainable and economically viable production of proteolytic enzymes with promising applications in various industries.

RESUMO

Pulses provide distinct health benefits due to their low fat content and high protein and fiber contents. Their grain production reaches approximately 93,210 × 103 tons per year. Pulses benefit from the symbiosis with atmospheric N2-fixing bacteria, which increases productivity and reduces the need for N fertilizers, thus contributing to mitigation of environmental impact mitigation. Additionally, the root region harbors a rich microbial community with multiple traits related to plant growth promotion, such as nutrient increase and tolerance enhancement to abiotic or biotic stresses. We reviewed the eight most common pulses accounting for almost 90% of world production: common beans, chickpeas, peas, cowpeas, mung beans, lentils, broad beans, and pigeon peas. We focused on updated information considering both single-rhizobial inoculation and co-inoculation with plant growth-promoting rhizobacteria. We found approximately 80 microbial taxa with PGPR traits, mainly Bacillus sp., B. subtilis, Pseudomonas sp., P. fluorescens, and arbuscular mycorrhizal fungi, and that contributed to improve plant growth and yield under different conditions. In addition, new data on root, nodule, rhizosphere, and seed microbiomes point to strategies that can be used to design new generations of biofertilizers, highlighting the importance of microorganisms for productive pulse systems.

RESUMO

Pisciculture represents one of the industries with the fastest growth rates worldwide. However, it presents obstacles to its development, such as bacteriosis, which is conventionally treated with antibiotics. The indiscriminate and inappropriate use of antibiotics can lead to bacterial resistance, thus alternatives to the use of antibiotics have been researched. The study aimed to analyze the potential of crude ethanol extract (CEE) from Hymenaea martiana leaf, gallic acid (GA), and polypyrrole (PPy) against Aeromonas hydrophila. Tests were performed to determine the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the compounds individually and in synergy (checkerboard) against A. hydrophila and in silico tests between the compounds evaluated. The CEE of H. martiana leaf and PPy were effective against A. hydrophila with MBC results of 3125 µg/mL for the CEE of H. martiana and 125 µg/mL for PPy. Evaluating the GA, a MIC and MBC of 125 µg/mL was obtained. In the interaction tests (checkerboard, using PPy/CEE and PPy/GA), there was a significant reduction in individual introductions. Thus, for the PPy/CEE tests, we had a reduction of MIC/MBC to 1.95 and 781.25 µg/mL, and for the synergy tests between PPy/GA to 7.8125 and 31.125 µg/mL, respectively. The synergy tests are encouraging, and it is possible to verify a decrease of up to 98% in the introduction of PPy, 75% in CEE for H. martiana and 75.1% for GA, when compared to their individual tests. The tests with GA are encouraging due to GA's effectiveness as an antimicrobial agent and high synergy with polypyrrole, both in vitro results and molecular docking experiments showed the actions at the same activation site in A. hydrophila. In vivo tests evaluating isolated components of CEE from H. martiana in synergy with PPy should be performed, to verify the quality of the interactions and the improvement of the immune responses of the animals. It was evidenced that gallic acid, a substance isolated from the extract, tends to have more promising results. This is relevant since the industry has been developing these compounds for different uses, thus providing easier access to the product. Thus, the present study indicates an efficient alternative in the use of bioactive compounds as substitutes for conventional antimicrobials.

Assuntos

RESUMO

This paper aims to assess the sustainability of coffee production in Brazil by a framework at the farm level. The framework developed comprises four dimensions of sustainability structured from the literature review. Primary data were collected from 20 coffee farms selected from the most producing communities in the Planalto de Vitória da Conquista locality, sited in Centro-Sul Baiano middle region at the Bahia state. The main environmental issues identified related to coffee farmers are inadequate management of water consumption, influenced by the lack of knowledge about irrigation techniques in some cases, and the use of synthetic fertilizers and pesticides. The economic evaluation of the activity revealed a low index of producers belonging to a class organization. In social aspects the issues are low level of technical/technological instruction for coffee producers, temporary workers are often used, the old age of most producers, the lack of family succession for the activity, low incomes, the high number of temporary workers, and the absence of the worker gains. As for the technical dimension, only half of the farmers invest in innovation, which causes high obsolescence of their equipment and machinery and a low participation rate in training courses. In the environmental dimension, the farmers return the packages of pesticides to the stores where they bought them. In the technical dimension, most farmers perform soil analysis. Besides addressing the identified challenges, the initiatives can help achieve the Sustainable Development Goals, especially the 9th, 12th, and 13th.

Assuntos

RESUMO

El cultivo de banano en el Urabá Antioqueño viene presentando disminución en los rendimientos, lo que exige la búsqueda de alternativas para incrementar o mantener la producción actual, entre las cuales, se encuentra el aumento en la proporción de fertilizantes inorgánicos, conllevando a sobrecostos y problemas ambientales. En vista de esta situación, se ha generado un interés por el uso de biofertilizantes, como el caso de las micorrizas (HFM), con las que se han demostrado beneficios al sistema suelo-planta. El objetivo de esta investigación fue evaluar el efecto de los HFM con la disminución de la dosis fosforada en el clon de banano Valery, en un sistema de alta densidad, bajo condiciones edafoclimáticas de Apartadó-Antioquia. Para ello, en los tratamientos, al momento de la siembra, se realizaron inoculaciones de 100 g de HFM comercial con 5 dosis de fósforo, que correspondieron a: 0, 25, 50, 75 y 100 kg*ha-1. Se midieron variables morfológicas, rendimiento y simbiosis micorrízica. El diseño experimental fue completamente al azar, con 3 repeticiones; cada unidad experimental estuvo constituida por 10 plantas contenidas en 5 sitios. La información se procesó con el programa estadístico SAS 9.1, se obtuvo el análisis de varianza y una prueba de comparación de medias (Tukey), con un nivel de significancia del 95 %. No se encontraron diferencias significativas en las variables morfológicas, pero sí en las variables productivas, siendo el tratamiento HFM + 50 kg P2O5*ha-1 el de mejor resultado y, además, presentó el mayor porcentaje de colonización micorrízica, con 59,5 %.

The banana crop in Uraba Antioqueño has been presenting a decrease in the yields, which requires the search for alternatives to increase or maintain current production, among which is the increase in the proportion of inorganic fertilizers leading to cost overruns and environmental problems. In view of this situation, there has been a growing interest in the use of biofertilizers such as mycorrhiza (HFM) with which multiple benefits to the soil-plant system have been demonstrated. The objective of this research was to evaluate the effect of HFM with the reduction of phosphorus dose in the Valery banana clone under a high-density system under edaphoclimatic conditions of Apartado-Antioquia. For this purpose, 100 g of commercial HFM were inoculated with 5 doses of phosphorus at time of sowing, corresponding to: 0, 25, 50, 75 and 100 kg*ha-1. Morphological variables, performance and mycorrhizal symbiosis were measured. The experimental design was completely random with 3 repetitions, each experimental unit was made up of 10 plants contained in 5 sites. The information was processed with the statistical program SAS 9.1, variance analysis was obtained and a mean comparison test (Tukey) with a significance level of 95 %. No significant differences were found in the morphological variables, but in the productive variables, the HFM + 50 Kg P2O5*ha-1 treatment was the best and also presented the highest percentage of mycorrhizal colonization with 59.5 %.

RESUMO

In recent years, research has been conducted in search of alternative adhesives that are less harmful to human health and the environment. Cardanol derived from cashew nut shell liquid (CNSL) has attracted considerable attention due to its chemical and specific characteristics (antioxidant activity, flame resistance, and hydrophobicity). In this sense, this study aimed to evaluate the quality of particleboards using cardanol instead of urea-formaldehyde (UF) adhesive. Different percentages of cardanol were used (0, 20, 40, 60 and 80%) in which its physicochemical properties were evaluated. The panels were produced with particles of Pinus oocarpa and nominal density of 0.75 g/cm3, their physical and mechanical properties were evaluated, wood-adhesive interface evaluation with scanning electron microscopy (SEM), and the combustibility test. It is concluded that the maximum replacement of UF by cardanol is 5%, since, in this situation, the mentioned properties reach the established norms for the commercialization of the boards.

Assuntos

RESUMO

Governments in the Global South have recently started to align their public procurement regulations considering Green Public Procurement (GPP) guidelines to achieve Sustainable Development Goal 12. In this context, it is important to establish environmental criteria to help decision making after analyzing the variety of options available in the market. Thus, using as examples two of the most acquired products in public procurement in Peru: Medium-density particleboard melamine furniture and paper offset, the aim of this paper is to determine the main environmental hotspots and therefore show the path to foster GPP in Peru. To achieve this goal, a Life Cycle Assessment was carried out considering it is a suitable environmental management tool to quantify environmental impacts. For this, a set of scenarios were modeled and compared for each of the two products selected, covering different geographical and technological options that are currently purchased by the Peruvian government. Results demonstrated that it is possible to attain considerable reductions in the environmental impact of the products analyzed if the main critical stages throughout their life cycle are identified and adequate solutions are applied to avoid burden shifting. Moreover, we argue that it is important for developing countries to carry out case-specific life-cycle inventories as they provide higher-quality information based on the particular characteristics of regional or local industries, allowing the determination of more realistic environmental impact mitigation benchmarks. Nevertheless, the inclusion of lifecycle-based criteria in GPP must be performed cautiously, avoiding command and control regulations, as numerous challenges remain in terms of capacity building, environmental awareness, and environmental information, and transparency in emerging and developing economies. Integr Environ Assess Manag 2022;18:1206-1220. © 2021 SETAC.

Assuntos

RESUMO

ABSTRACT The effect of diets with nonconventional forage resources, balu (Erythrina edulis) and giant taro (Alocasia macrorrhiza) was evaluated, on production parameters of New Zealand white rabbits (Oryctolagus cuniculus) under family farming production, in Silvania (Cundinamarca, Colombia). 36 weaned rabbits of 35 days old were used. They were distributed in 4 treatments (substitution of commercial pellets by giant taro leaves flour 25% (Giant taro), balu 25% (Balu); their mixture, giant taro 12.5% and balu 12.5% (GB), and a control with commercial pellets) with three repetitions each. Variables evaluated: initial weight at 35 days old, daily weight gain, consumption, feed conversion and final weight at 85 days old, carcass yield, haunch, loin and meat. Data was analyzed by Tukey multiple comparison test at 5% significance level, variance homogeneity and error independence verified by means of Shapiro-Wilks, Levene and Durbin-Watson tests, respectively by R program. No significant differences were found in the final weight, on weeks 5 and 6, which registered significant differences (p<0.05), for giant taro (1771.85±88.21 AB), control (1933.06±88.20 B), giant taro (1935.05+91.26 AB), control (2144.42±91.26 B) respectively Daily weight gain showed significant differences (p<0.05) at week 5 for giant taro (33.56±2.82 AB); control (.37±2.825 B). Significant differences were showed by most zootechnical variables (p<0.05). The results showed that diets with nonconventional forage resources (balu and giant taro) are a viable alternative for animal feeding, due to their high nutritional content and as a by-product of commercial interest for rural families in areas of the middle Colombian tropics.

RESUMEN Se evaluó el efecto de dietas con recursos forrajeros no convencionales, chachafruto (Erythrina edulis) y bore (Alocasia macrorrhiza), sobre parámetros productivos de conejos raza nueva Zelanda blanco (Oryctolagus cuniculus) bajo producción de agricultura familiar en Silvania (Cundinamarca, Colombia). Se utilizaron 36 conejos destetos de 35 días, los cuales fueron distribuidos en 4 tratamientos (sustitución de concentrado comercial por harinas de hojas de bore 25% (Bore), chachafruto 25% (Balu), su mezcla bore 12.5% y balu 12.5% (BB) y un control con concentrado comercial) con tres repeticiones cada uno. Se evaluaron variables como: peso inicial a los 35 días, ganancia diaria de peso, consumo, conversión alimenticia y peso final a los 85 dias de edad, rendimiento en canal, anca, lomo, carne. Los datos fueron analizados mediante la prueba de comparación múltiple de Tukey con significancia del 5%. La varianza, homogeneidad y error fueron verificados por la prueba de Shapiro-Wilks, Levene y Durbin-Watson, utilizando el programa R. No se encontraron diferencias significativas en el peso final, en las semanas 5 y 6 que registraron diferencias significativas (p<0,05), para el Bore (1771,85±88,21 AB); Control (1933,06±88,20 B) Bore (1935,05±91,26 AB); Control (2144,42±91,26 B) respectivamente; la ganancia diaria de peso presentó diferencias significativas (p<0,05) en la semana 5 para Bore (33,56±2,82 AB); Control (,37±2,825 B). La mayoría de variables zootécnicas presentaron diferencias significativas (p<0,05). Los resultados obtenidos demostraron que las dietas con recursos forrajeros no convencionales (chachafruto y bore) son una alternativa viable para la alimentación animal por su alto contenido nutricional y como subproducto de interés comercial para familias rurales de zonas del trópico medio colombiano.

RESUMO Foi avaliado o efeito das dietas com recursos forrageiros não convencionais, chachafruit (Erythrina edulis) e bore (Alocasia macrorrhiza), nos parâmetros produtivos dos coelhos brancos da Nova Zelândia (Oryctolagus cuniculuss sob produção agrícola familiar na Silvânia (Cundinamarca, Colômbia). Foram utilizados 36 coelhos desmamados de 35 dias, que foram distribuídos em quatro tratamentos (substituição do concentrado comercial por farinha de folha de furo 25% (Bore), chachafruit 25% (Balu), a sua mistura de furo 12,5% e balu 12,5% (BB) e um controlo com concentrado comercial) com três réplicas cada. Foram avaliadas as seguintes variáveis: peso inicial aos 35 dias, ganho de peso diário, ingestão de alimentos, conversão alimentar e peso final aos 85 dias de idade, rendimento da carcaça, alho, lombo e carne. Os dados foram analisados pelo teste de comparação múltipla de Tukey com um significado de 5%. A variância, homogeneidade e erro foram verificados pelo teste Shapiro-Wilks, Levene e Durbin-Watson, utilizando o programa R. Não foram encontradas diferenças significativas no peso final, nas semanas 5 e 6 que registaram diferenças significativas (p<0,05), para Bore (1771,85±88,21 AB); Controlo (1933,06±88,20 B) Bore (1935,05±91,26 AB); Controlo (2144,42±91,26 B) respectivamente; o ganho de peso diário apresentou diferenças significativas (p<0,05) na semana 5 para Bore (33,56±2,82 AB); Controlo (,37±2,825 B). A maioria das variáveis zootécnicas apresentou diferenças significativas (p<0,05). Os resultados obtidos mostraram que as dietas com recursos forrageiros não convencionais (chachafruit e bore) são uma alternativa viável para a alimentação animal devido ao seu elevado conteúdo nutricional e como subproduto de interesse comercial para as famílias rurais nas zonas meio-tropicais colombianas.

RESUMO

ABSTRACT The cultivation of microalgae is a possible destination for vinasse, a residue from the sugar and alcohol industry. This use can help reduce the costs of microalgae production and remediate this residue rich in nutrients. However, the physicochemical characteristics of vinasse limit its use for microalgae growth at low concentrations, except when the residue is pretreated. This work aimed at optimizing the vinasse pretreatments of centrifugation and adsorption by smectite clay and activated charcoal on laboratory scale in terms of amounts of materials used and time spent, making them more viable on larger scales. The optimized processes were then compared in productive, economic, and environmental terms. The dilution of treated vinasse with distilled water resulted in similar growth of Chlorella vulgaris to those obtained with the dilution in BG11 medium, indicating that the addition of nutrients in culture media is not necessary. Although microalgae growth occurs in higher concentrations of vinasse treated by adsorption, the results show that centrifugation required less processing time, has cheaper processing costs, and generated much less residue. Centrifugation treatment has greater economic and environmental viabilities and was more sustainable than the adsorption, even though the algae did not grow in the centrifuged residue in concentrations as high as it did after the adsorption treatment. Therefore, this article brings a new view about the economic and environmental aspects on the use of pretreated vinasse for microalgal growth, giving a lucrative destination for a highly polluting waste.

RESUMO O cultivo de microalgas é um possível destino para a vinhaça, um resíduo da indústria sucroalcooleira. Esse uso pode ajudar a reduzir custos da produção de microalgas, além de remediar esse resíduo rico em nutrientes, entretanto as características físico-químicas da vinhaça limitam seu uso para o crescimento de microalgas a baixas concentrações, exceto quando o resíduo é pré-tratado. Este trabalho objetivou otimizar os pré-tratamentos da vinhaça de centrifugação e de adsorção por argila esmectita e carvão ativado em escala laboratorial quanto à quantidade de materiais utilizados e tempo gasto, tornando-os mais viáveis em escalas ampliadas. Os processos otimizados foram então comparados em termos produtivos, econômicos e ambientais. A diluição das vinhaças tratadas com água destilada resultou em crescimento de Chlorella vulgaris semelhante ao obtido com diluições com meio BG11, indicando que a adição de nutrientes nos meios de cultura não é necessária. Embora o crescimento de microalgas ocorra em concentrações mais altas de vinhaça tratada por adsorção, os resultados mostram que a centrifugação exigiu menos tempo de processamento, tem custos mais baratos e gerou menos resíduos. De maneira comparativa, o tratamento por centrifugação possui maior viabilidade econômica e ambiental e foi mais sustentável do que a adsorção, embora as algas não tenham crescido no resíduo centrifugado em concentrações tão altas quanto após o tratamento de adsorção. Portanto, este artigo traz uma nova visão sobre os aspectos econômicos e ambientais do uso da vinhaça pré-tratada para o crescimento de microalgas, proporcionando um destino lucrativo para um resíduo altamente poluente.

RESUMO

The development of products from wastes such as plastic and lignocellulosic materials brings great advantages from the economic and sustainable point of view. The use of waste, previously destined for disposal, enables the changes in production patterns, and prevents major environmental problems. This research investigated the inclusion of different contents of cocoa almond husk on the properties of composites with recycled low-density polyethylene (LDPE) matrix. The composites were produced by extrusion process with proportions: 0%, 10%, 20%, 30%, and 40% of cocoa waste reinforcement in the polymer matrix. The density of the composites decreased (from 0.81 to 0.61 g/cm3) with the addition of the lignocellulosic waste in the matrix. The hygroscopicity was increased, however, at considerably low levels (0.17 to 2.68 %). There was a decrease in composite strength and elongation, becoming the material more rigid. The use of the cocoa waste for composites production is feasible to use since it can be adapted to the required application and still incorporate additives requested for specific purposes. This research demonstrated that is possible the combination of recycled low-density polyethylene and lignocellulosic wastes for the production of materials with high added value.

RESUMO

Cassava (Manihot esculenta Crantz) bagasse is the by-product from industry (BCI), generated during manufacturing of cassava flour; this material has significant amounts of carbohydrates consisting in a potential energy source for ruminants. We hypothesized that the inclusion of BCI in the diets may lead to fermentation parameters equivalent to those of conventional feedstuff such as tropical grasses or grains; therefore, we aimed to evaluate ruminal fermentation parameters of BCI in in vitro conditions. Three different substrates were prepared: 100% BCI (BCI diet), 100% tifton (Cynodon spp.) hay (CTL diet), and 50% tifton hay +50% BCI (THB diet). Ruminal fermentation parameters of these diets were evaluated in in vitro gas production assays. In a 24-h incubation, increased values for total gas production, organic matter degradability, and methane production were observed for BCId and THB as compared to CTL (p < 0.05), while neutral THB showed the highest value for neutral detergent fiber degradability (p < 0.05). Fermentation profile was evaluated in a 48-h assay: shorter lag time as well as increased gas production potential and fractional fermentation rate were observed for the BCId and THB as compared to CTL (p < 0.05). Our results suggested that by-product from cassava industry is a suitable feed for ruminant production, providing desirable in vitro ruminal fermentation performance and organic matter degradability.

Assuntos

RESUMO

The environments for flaxseed production and its soil-plant-atmosphere relationship, it is essential for distinguish and adapt them to the soil and crop management to obtain high sustainable yields and food diversification. Our goal was to characterize the main edaphoclimatic conditions for flaxseed production in South-Central, Brazil. The experiments were carried out in two locations representative of the edaphoclimatic conditions of South-Central, Brazil: 1 - Dourados, MS, with an Aw climate and LATOSSOLO VERMELHO Distroférrico (Haplustox) and 2 - Curitibanos, SC, with a Cfb climate and CAMBISSOLO HÚMICO (Haplumbrept), both cultivated with four flaxseed varieties: Aguará and Caburé from Argentina, UFSC (reddish-brown color) and Golden (golden-yellow color) from Brazil, grown under no-tillage system and few resources. Data from weather (air temperature and rainfall), plant growth, soil chemical and physical-hydric attributes, and postharvest quality of flaxseed were monitored. The data were submitted to Pearson's correlation matrix (P < 0.05) and multivariate principal component analysis (PCA). PCA segregated edaphoclimatic environments and varieties into four distinct groups. Each edaphoclimatic condition there was specific attributes discriminated by PCA ( > 78%). The lowest plant height ( < 0.85m), shorter cycle length (120-142 days) and high yield (≈1.13 Mg ha-1), especially golden-yellow flaxseed, were found in Dourados. The soil organic carbon and rainfall acted directly in Curitibanos, while charge balance and air temperature responded in Dourados influence flaxseed production. Soil physical and grain attributes were similar between the environments investigated. Both agricultural environments showed feasibility for flaxseed sustainable production in Brazil, it is important to emphasize that these results are pioneers, especially the edaphoclimatic conditions from Dourados.(AU)

Os ambientes de produção de linhaça e sua relação solo-planta-atmosfera é fundamental para distinguilos e adaptá-los ao manejo do solo e da cultura para obtenção de elevados rendimentos sustentáveis e diversificação alimentar. Nosso objetivo foi caracterizar as principais condições edafoclimáticas para a produção de linhaça no Centro-Sul, Brasil. Os experimentos foram conduzidos em dois locais representativos das condições edafoclimáticas do Centro-Sul, Brasil: 1 - Dourados, MS, com clima Aw e LATOSSOLO VERMELHO Distroférrico (Haplustox) e 2 - Curitibanos, SC, com clima Cfb e CAMBISSOLO HÚMICO (Haplumbrept), ambas cultivadas com quatro variedades de linhaça: Aguará e Caburé da Argentina, UFSC (coloração marrom-avermelhada) e Dourada (coloração amarelo-ouro) do Brasil, cultivadas em sistema plantio direto e baixo input. Foram monitorados dados de clima (temperatura do ar e precipitação), crescimento da planta, atributos químicos e físico-hídricos do solo e qualidade póscolheita da semente de linhaça. Os dados foram submetidos à matriz de correlação de Pearson's (P < 0,05) e a análise multivariada de componentes principais (PCA). O PCA segregou os ambientes edafoclimáticos e variedades em quatro grupos distintos. Em cada condição edafoclimática a PCA identificou atributos específicos que os diferenciaram (> 78%). A menor altura de planta ( < 0,85m), menor comprimento do ciclo (120-142 dias) e alto rendimento (≈1,13 Mg ha-1), especialmente a linhaça amarelo-ouro, foram encontrados em Dourados. O carbono orgânico do solo e a chuva atuaram diretamente no ambiente de Curitibanos, enquanto o balanço de carga e a resposta a temperatura do ar em Dourados influenciam a produção de linhaça. Os atributos físicos dos grãos e do solo foram semelhantes entre os ambientes investigados. Ambos os ambientes agrícolas apresentaram viabilidade para a produção sustentável de linhaça no Brasil, é importante ressaltar que esses resultados são pioneiros, principalmente nas condições edafoclimáticas de Dourados.(AU)

Assuntos

RESUMO

This work aimed to evaluate the technical feasibility of lettuce, Indian spinach and taro intercropping under organic fertilizer. The experiment was performed at Água Limpa Farm, belonging to the University of Brasília, located in Brasília - DF, from October 2014 to June 2015. A completely randomized block design with seven treatments and four replications was used. Each experimental plot had 18 m2 (4.5 m x 4.0 m), totaling 28 plots. The following treatments were assessed: lettuce monoculture, Indian spinach monoculture, taro monoculture, lettuce/Indian spinach intercropping, lettuce/taro intercropping, Indian spinach/taro intercropping, and lettuce/Indian spinach/taro intercropping. In all treatments, the following spacings were used: 0.25 x 0.25 m (lettuce), 1.0 x 0.6 m (Indian spinach), and 1.0 x 0.3 m (taro). Crop production was evaluated from sample plants taken from the central part of each plot. Two harvests of lettuce, two of Indian spinach and one of taro were carried out during intercropping. In the first cycle, lettuce highest mean yield values were observed in the lettuce monoculture (3.5 kg m-2) and lettuce/Indian spinach intercropping (3.4 kg m-2). The crop reached the commercial size in both production cycles, except when intercropped with Indian spinach in the second cycle. The highest Indian spinach mean fresh mass was recorded in the lettuce/Indian spinach intercropping (974.7 g plant-1; first harvest) and monoculture (327.5 g plant-1; second harvest). The yield of taro rhizomes was significantly higher when intercropped with lettuce, showing a mean value of 16.8 kg m-2. The intercropping arrangements with lettuce increased yield of nonconventional vegetables. The conventional and nonconventional vegetables' intercropping technique increased species diversity in the area without interfering in the agronomic performance and quality of the crops.

Assuntos

RESUMO

Rice is the second-most produced cereal worldwide and actively contributes to greenhouse gas (GHG) emissions, particularly methane, especially under deepwater production. Assessments of energy efficiency (EE) and GHG emissions can indicate the sustainability level of agrosystems and support decisions related to the reduction of production costs and environmental pollution. This study aimed to assess both EE and GHG emissions in organic and conventional rice production in the Southern region of Brazil. For this study, eight rice fields were evaluated. Energy inputs and outputs were calculated by multiplying the production input amounts by their respective calorific values or energy coefficients at each stage of production. EE was determined using the ratio between the total energy output and the total energy consumed during the production process. GHG emissions were estimated using the principles of the lifecycle assessment methodology in addition to the Intergovernmental Panel on Climate Change (IPCC) recommendations. Each 1.0 MJ consumed during the production of organic and conventional rice produced renewable energy averages of 10.5 MJ and 7.90 MJ, respectively, as grains. The primary energy expenses for organic rice were represented by seeds, fuel, tractors, and agricultural machinery and implements, and those for conventional rice were seeds, fuel, and fertilizers. Each kilogram of organic and conventional rice produced accounted for the emission of 0.21 and 0.32 kg of CO2eq, respectively, during the production cycles and delivery to the warehouse, with seeds, fuel, and fertilizers being the main sources of CO2eq emissions to the atmosphere.

O arroz é o segundo cereal mais cultivado no mundo e contribui ativamente nas emissões de GEE, principalmente em áreas produzidas sob inundação, com destaque para a produção de gás metano. A eficiência energética (EE) e as emissões de gases de efeito estufa (GEE) podem indicar o nível de sustentabilidade dos agrossistemas e a tomada de decisões relativas à redução dos custos de produção e poluição do ambiente. O objetivo deste trabalho foi avaliar a EE e emissões de GEE nas culturas do arroz sob cultivo orgânico e convencional na região sul do Brasil. Para isso, foram avaliadas oito áreas de arroz. As entradas e saídas de energia foram calculadas pela multiplicação da quantidade de produtos utilizados para a produção de arroz pelos seus respectivos poderes caloríficos ou coeficientes energéticos em cada etapa de produção. A EE foi obtida pela razão entre a quantidade de energia total de saída e o consumo total de energia durante o processo produtivo. Para estimar a emissão de GEE, foram aplicados princípios da metodologia de avaliação do ciclo de vida e recomendações do Painel Intergovernamental sobre Mudanças Climáticas (IPCC). Para cada 1,0 MJ de energia consumida na produção orgânica de arroz sob os sistemas orgânico e convencional, se produziram respectivamente em média, 10,5 MJ e 7,90 MJ de energia renovável, na forma de grãos. Os principais gastos energéticos no arroz orgânico foram com sementes, combustível, tratores, máquinas e implementos agrícolas e para o arroz convencional foram sementes, combustível e fertilizantes. Para cada 1 kg de grãos dos sistemas orgânicos e convencional são emitidos respectivamente 0,21 e 0,32 kg de CO2eq durante seus ciclos de produção e entrega no armazém, sendo as sementes, combustíveis e fertilizantes as principais fontes de emissão de CO2eq à atmosfera.

Assuntos

RESUMO

Rice is the second-most produced cereal worldwide and actively contributes to greenhouse gas (GHG) emissions, particularly methane, especially under deepwater production. Assessments of energy efficiency (EE) and GHG emissions can indicate the sustainability level of agrosystems and support decisions related to the reduction of production costs and environmental pollution. This study aimed to assess both EE and GHG emissions in organic and conventional rice production in the Southern region of Brazil. For this study, eight rice fields were evaluated. Energy inputs and outputs were calculated by multiplying the production input amounts by their respective calorific values or energy coefficients at each stage of production. EE was determined using the ratio between the total energy output and the total energy consumed during the production process. GHG emissions were estimated using the principles of the lifecycle assessment methodology in addition to the Intergovernmental Panel on Climate Change (IPCC) recommendations. Each 1.0 MJ consumed during the production of organic and conventional rice produced renewable energy averages of 10.5 MJ and 7.90 MJ, respectively, as grains. The primary energy expenses for organic rice were represented by seeds, fuel, tractors, and agricultural machinery and implements, and those for conventional rice were seeds, fuel, and fertilizers. Each kilogram of organic and conventional rice produced accounted for the emission of 0.21 and 0.32 kg of CO2eq, respectively, during the production cycles and delivery to the warehouse, with seeds, fuel, and fertilizers being the main sources of CO2eq emissions to the atmosphere.(AU)

O arroz é o segundo cereal mais cultivado no mundo e contribui ativamente nas emissões de GEE, principalmente em áreas produzidas sob inundação, com destaque para a produção de gás metano. A eficiência energética (EE) e as emissões de gases de efeito estufa (GEE) podem indicar o nível de sustentabilidade dos agrossistemas e a tomada de decisões relativas à redução dos custos de produção e poluição do ambiente. O objetivo deste trabalho foi avaliar a EE e emissões de GEE nas culturas do arroz sob cultivo orgânico e convencional na região sul do Brasil. Para isso, foram avaliadas oito áreas de arroz. As entradas e saídas de energia foram calculadas pela multiplicação da quantidade de produtos utilizados para a produção de arroz pelos seus respectivos poderes caloríficos ou coeficientes energéticos em cada etapa de produção. A EE foi obtida pela razão entre a quantidade de energia total de saída e o consumo total de energia durante o processo produtivo. Para estimar a emissão de GEE, foram aplicados princípios da metodologia de avaliação do ciclo de vida e recomendações do Painel Intergovernamental sobre Mudanças Climáticas (IPCC). Para cada 1,0 MJ de energia consumida na produção orgânica de arroz sob os sistemas orgânico e convencional, se produziram respectivamente em média, 10,5 MJ e 7,90 MJ de energia renovável, na forma de grãos. Os principais gastos energéticos no arroz orgânico foram com sementes, combustível, tratores, máquinas e implementos agrícolas e para o arroz convencional foram sementes, combustível e fertilizantes. Para cada 1 kg de grãos dos sistemas orgânicos e convencional são emitidos respectivamente 0,21 e 0,32 kg de CO2eq durante seus ciclos de produção e entrega no armazém, sendo as sementes, combustíveis e fertilizantes as principais fontes de emissão de CO2eq à atmosfera.(AU)

Assuntos

RESUMO

Nitrogen topdressing is essential for forage production, but the high cost of fertilizers stimulates the search for new technologies, such as the use of diazotrophic bacteria, which can fix the atmospheric nitrogen. To evaluate the potential of this technology in providing the amount of nitrogen requested by xaraés grass as topdressing, plants were fertilized at planting with an N rate of 100 kg ha-1, inoculated with strains of diazotrophic bacteria and Azospirillum brasilense, and compared with plants that received 100 kg ha-1 of N at planting and as topdressing during two periods of shoot growth (58 days in the first period and 26 days in the second period) in 20-dm3 pots. The data were subjected to analysis of variance and means compared by the Scott-Knott test at 5% significance. The leaf area of xaraés grass inoculated with strain UN42 was similar to that of plants that received nitrogen topdressing. However, grass biomass production was higher when nitrogen topdressing was applied. Plant inoculation with Azospirillum brasilense and strains UN16, UN17, UN21, UN33, UN49, and UN78 increased crude protein contents of xaraés grass when compared to nitrogen fertilization at planting without inoculation. However, grass inoculation with diazotrophic bacteria does not replace nitrogen topdressing completely.(AU)

A adubação nitrogenada em cobertura é imprescindível para a produção de forragem, mas o elevado custo dos fertilizantes estimula a busca por novas tecnologias, como o uso de bactérias diazotróficas, que podem fixar o nitrogênio atmosférico. Para avaliar o potencial dessa tecnologia em suprir a quantidade de nitrogênio requerida pelo capim-xaraés em cobertura, as plantas foram adubadas em plantio com dose equivalente a 100 kg ha-1 de N e inoculadas com estirpes de bactérias diazotróficas e Azospirillum brasilense, e comparadas com plantas que receberam 100 kg ha-1 de N em plantio e em cobertura, durante dois períodos de crescimento da parte aérea (58 dias no primeiro período e 26 dias no segundo período), em vasos de 20 dm3. Os dados foram submetidos à análise de variância e as médias comparadas pelo teste Scott-Knott a 5% de significância. A área foliar do capim-xaraés inoculado com a estirpe UN42 foi semelhante a das plantas que receberam adubação nitrogenada em cobertura. Todavia, a produção de massa do capim foi maior quando houve adubação nitrogenada em cobertura. A inoculação das plantas com Azospirillum brasilense e as estirpes UN16, UN17, UN21, UN33, UN49 e UN78 aumentou os teores de proteína bruta do capim-xaraés em relação à adubação nitrogenada em plantio sem inoculação. Porém, a inoculação do capim com as bactérias diazotróficas não substitui totalmente a adubação nitrogenada em cobertura.(AU)

Assuntos

RESUMO

Traditional fermented foods where lactic acid bacteria (LAB) are present have been associated with beneficial effects on human health, and some of those benefits are related to protein-derived products. Peptides produced by LAB have attracted the interest of food industries because of their diverse applications. These peptides include ribosomally produced (bacteriocins) and protein hydrolysates by-products (bioactive peptides), which can participate as natural preservatives and nutraceuticals, respectively. It is essential to understand the biochemical pathways and the effect of growth conditions for the production of bioactive peptides and bacteriocins by LAB, in order to suggest strategies for optimization. LAB is an important food-grade expression system that can be used in the simultaneous production of peptide-based products for the food, animal, cosmetic, and pharmaceutical industries. This review describes the multifunctional proteinaceous compounds generated by LAB metabolism and discusses a strategy to use a single-step production process, using an alternative protein-based media. This strategy will provide economic advantages in fermentation processes and will also provide an environmental alternative to industrial waste valorization. New technologies that can be used to improve production and bioactivity of LAB-derived peptides are also analyzed.

RESUMO

Nitrogen topdressing is essential for forage production, but the high cost of fertilizers stimulates the search for new technologies, such as the use of diazotrophic bacteria, which can fix the atmospheric nitrogen. To evaluate the potential of this technology in providing the amount of nitrogen requested by xaraés grass as topdressing, plants were fertilized at planting with an N rate of 100 kg ha-1, inoculated with strains of diazotrophic bacteria and Azospirillum brasilense, and compared with plants that received 100 kg ha-1 of N at planting and as topdressing during two periods of shoot growth (58 days in the first period and 26 days in the second period) in 20-dm3 pots. The data were subjected to analysis of variance and means compared by the Scott-Knott test at 5% significance. The leaf area of xaraés grass inoculated with strain UN42 was similar to that of plants that received nitrogen topdressing. However, grass biomass production was higher when nitrogen topdressing was applied. Plant inoculation with Azospirillum brasilense and strains UN16, UN17, UN21, UN33, UN49, and UN78 increased crude protein contents of xaraés grass when compared to nitrogen fertilization at planting without inoculation. However, grass inoculation with diazotrophic bacteria does not replace nitrogen topdressing completely.

A adubação nitrogenada em cobertura é imprescindível para a produção de forragem, mas o elevado custo dos fertilizantes estimula a busca por novas tecnologias, como o uso de bactérias diazotróficas, que podem fixar o nitrogênio atmosférico. Para avaliar o potencial dessa tecnologia em suprir a quantidade de nitrogênio requerida pelo capim-xaraés em cobertura, as plantas foram adubadas em plantio com dose equivalente a 100 kg ha-1 de N e inoculadas com estirpes de bactérias diazotróficas e Azospirillum brasilense, e comparadas com plantas que receberam 100 kg ha-1 de N em plantio e em cobertura, durante dois períodos de crescimento da parte aérea (58 dias no primeiro período e 26 dias no segundo período), em vasos de 20 dm3. Os dados foram submetidos à análise de variância e as médias comparadas pelo teste Scott-Knott a 5% de significância. A área foliar do capim-xaraés inoculado com a estirpe UN42 foi semelhante a das plantas que receberam adubação nitrogenada em cobertura. Todavia, a produção de massa do capim foi maior quando houve adubação nitrogenada em cobertura. A inoculação das plantas com Azospirillum brasilense e as estirpes UN16, UN17, UN21, UN33, UN49 e UN78 aumentou os teores de proteína bruta do capim-xaraés em relação à adubação nitrogenada em plantio sem inoculação. Porém, a inoculação do capim com as bactérias diazotróficas não substitui totalmente a adubação nitrogenada em cobertura.

Assuntos

RESUMO

Feeding is one of the major factors that influences the growth and development of animals, justifying thus the present experiment that analyzed the effect of the number of feeding environments on the performance of bullfrog tadpoles through the growth (weight and length) and performance (food remains, average feed intake, average weight gain, and feed conversion). The treatments consisted of subunits of two, four, and eight feeding environments in the experimental units at disposal for the tadpole population, and one without subdivisions, comprising a single environment, during 60 experimental days. The design was completely randomized, with four treatments and three replications. The values were tested using an analysis of variance and Duncan test ( = 0.05). The growth in weight and length and the indices of animal performance were influenced by the number of feeding environments, with the best results found for the treatments with four and eight environments, and the worst, for the treatment with a single environment. The increased number of feeding environments may be an alternative to improve the performance of bullfrog tadpoles.(AU)

Alimentação íntegra a um conjunto de fatores que influenciam o crescimento e o desenvolvimento dos animais. Com isso, foi realizado o experimento com o objetivo de verificar pelo crescimento (peso e comprimento) e o desempenho (sobras diárias de ração, consumo médio de ração, ganho de peso médio e conversão alimentar) dos girinos de rã-touro a influência do número de ambientes de alimentação no desempenho de girinos de rã-touro. Os tratamentos foram subdivisões em dois, quatro e oito ambientes de alimentação das unidades experimentais em relação à população de girinos e um sem subdivisões com ْnico ambiente, durante 60 dias experimentais. O delineamento foi inteiramente casualizado, com quatro tratamentos e três repetições. Os valores encontrados foram submetidos à análise de variância e ao teste de Duncan ( = 0,05). O crescimento em peso e comprimento e os índices de desempenho zootécnicos foram influenciados pelo número de ambientes de alimentação, sendo que os melhores resultados foram para os tratamentos com quatro e oito ambientes e o piores para com ْnico ambiente. O aumento do nْmero de ambientes de alimentação pode ser uma alternativa para melhorar o desempenho dos girinos de rم-touro.(AU)

Assuntos