RESUMO
Amperometric and potentiometric probes were employed for the detection and characterization of reactive sites on the 2098-T351 Al-alloy (AA2098-T351) using scanning electrochemical microscopy (SECM). Firstly, the probe of concept was performed on a model Mg-Al galvanic pair system using SECM in the amperometric and potentiometric operation modes, in order to address the responsiveness of the probes for the characterization of this galvanic pair system. Next, these sensing probes were employed to characterize the 2098-T351 alloy surface immersed in a saline aqueous solution at ambient temperature. The distribution of reactive sites and the local pH changes associated with severe localized corrosion (SLC) on the alloy surface were imaged and subsequently studied. Higher hydrogen evolution, lower oxygen depletion and acidification occurred at the SLC sites developed on the 2098-T351 Al-alloy.
RESUMO
The nuclear pore complex (NPC) is the proteinaceous nanopore that solely mediates the transport of both small molecules and macromolecules between the nucleus and cytoplasm of a eukaryotic cell to regulate gene expression. In this personal account, we introduce recent progress in our nanoelectrochemical study of molecular transport through the NPC. Our work represents the importance of chemistry in understanding and controlling of NPC-mediated molecular transport to enable the efficient and safe delivery of genetic therapeutics into the nucleus, thereby fundamentally contributing to human health. Specifically, we employ nanoscale scanning electrochemical microscopy to test our hypothesis that the nanopore of the NPC is divided by transport barriers concentrically into peripheral and central routes to efficiently mediate the bimodal traffic of protein transport and RNA export, respectively, through cooperative hydrophobic and electrostatic interactions.
Assuntos
Técnicas Eletroquímicas , Nanotecnologia , Poro Nuclear/metabolismo , RNA/metabolismo , Humanos , Interações Hidrofóbicas e Hidrofílicas , Poro Nuclear/química , RNA/química , Eletricidade EstáticaRESUMO
OBJECTIVE: To study the value of oxygen consumption (OC) as a predictor of the developmental potential of D3 embryos in frozen embryo transfer (FET) cycles. METHODS: This observational study included 148 patients undergoing FET cycles with two embryos transferred per cycle. OC rates were examined by scanning electrochemical microscopy before embryo transfer. Implantation, clinical pregnancy, miscarriage, and live birth rates were calculated. RESULTS: A total of 296 embryos were transferred in 148 cycles, or two embryos per cycle. The embryos were divided into three groups based on OC: Group A included the cases in which the OC rate of each of the two transferred embryos was greater than 3.0 fmol/s; Group B included the cases in which the OC rate of one of the embryos was greater than 3.0 fmol/s and the OC rate of the other embryo was less than 3.0 fmol/s; and Group C included the cases in which the OC rates of the two embryos were less than 3.0 fmol/s. Higher live birth rates and lower miscarriage rates were observed in Group A (p<0.05). CONCLUSIONS: Our data suggest that OC is positively correlated with embryo developmental potential. Therefore, measuring the OC of human embryos may be useful in embryo assessment.
Assuntos
Implantação do Embrião/fisiologia , Transferência Embrionária/métodos , Desenvolvimento Embrionário/fisiologia , Consumo de Oxigênio/fisiologia , Adulto , Coeficiente de Natalidade , Criopreservação , Feminino , Humanos , Gravidez , Taxa de Gravidez , Estudos RetrospectivosRESUMO
The demand for hydrophobic polymer-based protective coatings to impart high corrosion resistance has increased recently. The increase of the hydrophobicity in a hybrid coating is a new challenge, for that reason and in order to protect a metallic surface of oxidant agents, a poly (methyl methacrylate) (PMMA) coating with the addition of a different amount of silicon dioxide (SiO2) was developed. The hybrid coating was applied on a sample of stainless steel AISI 304 by the dip-coating method. The characterization of the coatings was determined by electrochemical impedance spectroscopy and with a scanning electrochemical microscopy. The best coatings were PMMA and PMMA + SiO2 0.01% that exhibits a real impedance in the Nyquist diagram of 760 and 427,800 MΩâ cm2, respectively, and the modulus of the real impedance in the Bode diagram present values of 2.2 × 108 and 3.3 × 108 Ωâ cm2. Moreover, the phase angle presents constant values around 75° to 85° and 85° for the PMMA and PMMA + SiO2 0.01%, respectively. Moreover, the values of the real resistance for the PMMA + SiO2 0.01% coating present values in the order of Mega-ohms despite the coating exhibits an artificial defect in their surface. The contact angle test showed that the hydrophobicity of the hybrid PMMA + SiO2 0.01% coating is higher than that of the pure PMMA coatings. The hybrid PMMA + SiO2 coatings developed in this work are a very interesting and promising area of study in order to develop efficient products to protect metallic surfaces from corrosion phenomenon.