RESUMO
This study reports on the modification of bacterial cellulose (BC) membranes produced by static fermentation of Komagataeibacter xylinus bacterial strains with graphene oxide-silver nanoparticles (GO-Ag) to yield skin wound dressings with improved antibacterial properties. The GO-Ag sheets were synthesized through chemical reduction with sodium citrate and were utilized to functionalize the BC membranes (BC/GO-Ag). The BC/GO-Ag composites were characterized to determine their surface charge, morphology, exudate absorption, antimicrobial activity, and cytotoxicity by using fibroblast cells. The antimicrobial activity of the wound dressings was assessed against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The results indicate that the BC/GO-Ag dressings can inhibit â¼70% of E. coli cells. Our findings also revealed that the porous BC/GO-Ag antimicrobial dressings can efficiently retain 94% of exudate absorption after exposure to simulated body fluid (SBF) for 24 h. These results suggest that the dressings could absorb excess exudate from the wound during clinical application, maintaining adequate moisture, and promoting the proliferation of epithelial cells. The BC/GO-Ag hybrid materials exhibited excellent mechanical flexibility and low cytotoxicity to fibroblast cells, making excellent wound dressings able to control bacterial infectious processes and promote the fast healing of dermal lesions.
Assuntos
Antibacterianos , Materiais Biocompatíveis , Celulose , Escherichia coli , Grafite , Teste de Materiais , Nanopartículas Metálicas , Testes de Sensibilidade Microbiana , Prata , Staphylococcus aureus , Cicatrização , Grafite/química , Grafite/farmacologia , Prata/química , Prata/farmacologia , Cicatrização/efeitos dos fármacos , Celulose/química , Celulose/farmacologia , Nanopartículas Metálicas/química , Antibacterianos/química , Antibacterianos/farmacologia , Staphylococcus aureus/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Tamanho da Partícula , Pseudomonas aeruginosa/efeitos dos fármacos , Gluconacetobacter xylinus/química , Humanos , Camundongos , Bandagens , AnimaisRESUMO
A key strategy in enhancing the efficacy of collagen-based hydrogels involves incorporating polysaccharides, which have shown great promise for wound healing. In this study, semi-interpenetrating polymeric network (semi-IPN) hydrogels comprised of collagen (Col) with the macrocyclic oligosaccharide ß-cyclodextrin (ß-CD) (20-80 wt.%) were synthesised. Fourier-transform infrared (FTIR) spectroscopy confirmed the successful fabrication of these Col/ß-CD hydrogels, evidenced by the presence of characteristic absorption bands, including the urea bond band at â¼1740 cm-1, related with collagen crosslinking. Higher ß-CD content was associated with increased crosslinking, higher swelling, and faster gelation. The ß-CD content directly influenced the morphology and semi-crystallinity. All Col/ß-CD hydrogels displayed superabsorbent properties, enhanced thermal stability, and exhibited slow degradation rates. Mechanical properties were significantly improved with contents higher than ß-CD 40 wt.%. These hydrogels inhibited the growth of Escherichia coli bacteria and facilitated the controlled release of agents, such as malachite green, methylene blue, and ketorolac. The chemical composition of the Col/ß-CD hydrogels did not induce cytotoxic effects on monocytes and fibroblast cells. Instead, they actively promoted cellular metabolic activity, encouraging cell growth and proliferation. Moreover, cell signalling modulation was observed, leading to changes in the expression of TNF-α and IL-10 cytokines. In summary, the results of this research indicate that these novel hydrogels possess multifunctional characteristics, including biocompatibility, super-swelling capacity, good thermal, hydrolytic, and enzymatic degradation resistance, antibacterial activity, inflammation modulation, and the ability to be used for controlled delivery of therapeutic agents, indicating high potential for application in advanced wound dressings.
Assuntos
Antibacterianos , Bandagens , Colágeno , Preparações de Ação Retardada , Liberação Controlada de Fármacos , Escherichia coli , Hidrogéis , beta-Ciclodextrinas , Hidrogéis/química , Hidrogéis/farmacologia , beta-Ciclodextrinas/química , Antibacterianos/farmacologia , Antibacterianos/química , Preparações de Ação Retardada/química , Colágeno/química , Escherichia coli/efeitos dos fármacos , Humanos , Cicatrização/efeitos dos fármacos , Inflamação/tratamento farmacológico , Animais , CamundongosRESUMO
The economic burden of chronic wounds, the complexity of the process of tissue repair and the possibility of resistant bacterial infections, have triggered a significant research interest in the application of natural alternative therapies for wound healing. Biomolecules are intrinsically multi-active, as they affect multiple mechanisms involved in tissue repair phenomenon, including immunomodulatory, anti-inflammatory, cell proliferation, extra cellular matrix remodeling and angiogenesis. Chitosan features a unique combination of attributes, including intrinsic hemostatic, antimicrobial, and immunomodulatory properties, that make it an exceptional candidate for wound management, in the development of wound dressings and scaffolds. In this study, we produced nanoemulsions (NE) loaded with SFO, characterized them, and evaluated their tissue repairing properties. Dynamic light scattering (DLS) analysis confirmed the formation of a nanoemulsion with a droplet size of 21.12 ± 2.31 nm and a polydispersity index (PdI) of 0.159, indicating good stability for up to 90 days. To investigate the potential wound healing effects, SFO-loaded NE were applied on male C57BL/6 mice for seven consecutive days, producing a significantly higher wound closure efficiency (p < 0.05) for the group treated with SFO-loaded NE compared to the control group treated with the saline solution. This finding indicates that the SFO-loaded NE exhibits therapeutic properties that effectively promote wound healing in this experimental model. Then, SFO-loaded NE were incorporated into chitosan:polyvinyl alcohol (PVA)-based films. The inclusion of NE into the polymer matrix resulted in increased lipophilicity reflected by the contact angle results, while decreasing moisture absorption, water solubility, and crystallinity. Moreover, FTIR analysis confirmed the formation of new bonds between SFO-NE and the film matrix, which also impacted on porosity properties. Thermal analysis indicated a decrease in the glass transition temperature of the films due to the presence of SFO-NE, suggesting a plasticizing role of NE, confirmed by XRD results, that showed a decrease in the crystallinity of the blend films upon the addition of SFO-NE. AFM images showed no evidence of NE droplet aggregation in the Chitosan:PVA film matrix. Moisture absorption and water content decreased upon incorporation of SFO-loaded NE. Although the inclusion of NE increased hydrophobicity and water contact angle, the values remained within an acceptable range for wound healing applications. Overall, our results emphasize the significant tissue repairing properties of SFO-loaded NE and the potential of Chitosan:PVA films containing nanoencapsulated SFO as effective formulations for wound healing with notable tissue repairing properties.
Assuntos
Quitosana , Óleos Voláteis , Humanos , Camundongos , Animais , Masculino , Quitosana/química , Óleos Voláteis/farmacologia , Camundongos Endogâmicos C57BL , Cicatrização , Água/farmacologia , Álcool de Polivinil/química , Antibacterianos/farmacologiaRESUMO
This study evaluated the antibiofilm activity of promethazine, deferiprone, and Manuka honey against Staphylococcus aureus and Pseudomonas aeruginosa in vitro and ex vivo in a wound model on porcine skin. The minimum inhibitory concentrations (MICs) and the effects of the compounds on biofilms were evaluated. Then, counting colony-forming units (CFUs) and confocal microscopy were performed on biofilms cultivated on porcine skin for evaluation of the compounds. For promethazine, MICs ranging from 97.66 to 781.25 µg/ml and minimum biofilm eradication concentration (MBEC) values ranging from 195.31 to 1562.5 µg/ml were found. In addition to reducing the biomass of both species' biofilms. As for deferiprone, the MICs were 512 and >1024 µg/ml, the MBECs were ≥1024 µg/ml, and it reduced the biomass of biofilms. Manuka honey had MICs of 10%-40%, MBECs of 20 to >40% and reduced the biomass of S. aureus biofilms only. Concerning the analyses in the ex vivo model, the compounds reduced (P < .05) CFU counts for both bacterial species, altering the biofilm architecture. The action of the compounds on biofilms in in vitro and ex vivo tests raises the possibility of using them against biofilm-associated wounds. However, further studies are needed to characterize the mechanisms of action and their effectiveness on biofilms in vivo.
Assuntos
Mel , Staphylococcus aureus , Animais , Suínos , Prometazina/farmacologia , Deferiprona/farmacologia , Biofilmes , Pseudomonas aeruginosa , Antibacterianos/farmacologia , Testes de Sensibilidade MicrobianaRESUMO
Wound healing is a complex process that involves restoring the structure of damaged tissues through four phases: hemostasis, inflammation, proliferation, and remodeling. Wound dressings are the most common treatment used to cover wounds, reduce infection risk and the loss of physiological fluids, and enhance wound healing. Despite there being several types of wound dressings based on different materials and fabricated through various techniques, polymeric films have been widely employed due to their biocompatibility and low immunogenicity. Furthermore, they are non-invasive, easy to apply, allow gas exchange, and can be transparent. Among different methods for designing polymeric films, solvent casting represents a reliable, preferable, and highly used technique due to its easygoing and relatively low-cost procedure compared to sophisticated methods such as spin coating, microfluidic spinning, or 3D printing. Therefore, this review focuses on the polymeric dressings obtained using this technique, emphasizing the critical manufacturing factors related to pharmaceuticals, specifically discussing the formulation variables necessary to create wound dressings that demonstrate effective performance.
RESUMO
In recent years significant efforts have been made to develop new materials for wound dressing with improved healing properties. However, the synthesis methods usually employed to this end are often complex or require several steps. We describe here the synthesis and characterization of antimicrobial reusable dermatological wound dressings based on N-isopropylacrylamide co-polymerized with [2-(Methacryloyloxy) ethyl] trimethylammonium chloride hydrogels (NIPAM-co-METAC). The dressings were obtained with a very efficient single-step synthesis procedure based on visible light (455 nm) by photopolymerization. To this end, F8BT nanoparticles of the conjugated polymer (poly(9,9-dioctylfluorene-alt-benzothiadiazole) - F8BT) were used as macro-photoinitiators, and a modified silsesquioxane was employed as crosslinker. Dressings obtained by this simple and gentle method show antimicrobial and wound healing properties, without the incorporation of antibiotics or any other additives. The physical and mechanical properties of these hydrogel-based dressings were evaluated, as well as their microbiological properties, through in vitro experiments. Results show that dressings with a molar ratio of METAC of 0.5 or higher exhibit high swelling capacity, appropriate water vapor transmission rate values, stability and thermal response, high ductility and adhesiveness. In addition, biological tests showed that the dressings have significant antimicrobial capacity. The best inactivation performance was found for hydrogels synthesized with the highest METAC content. The dressings were tested several times with fresh bacterial cultures, showing a bacterial kill efficiency of 99.99 % even after three repetitions in a row, employing the same dressing, demonstrating the intrinsic bactericidal property of the materials and their reusability. In addition, the gels show low hemolytic effect, high dermal biocompatibility and noticeable wound healing effects. Overall results demonstrate that some specific hydrogel formulations have potential application as dermatological dressings for wound healing and disinfection.
Assuntos
Antibacterianos , Anti-Infecciosos , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , Cicatrização , Bandagens , Hidrogéis/farmacologiaRESUMO
Diabetic foot ulcers (DFUs) are considered one of the most severe chronic complications of diabetes and can lead to amputation in severe cases. In addition, bacterial infections in diabetic chronic wounds aggravate this scenario by threatening human health. Wound dressings made of polymer matrices with embedded metal nanoparticles can inhibit microorganism growth and promote wound healing, although the current clinical treatments for diabetic chronic wounds remain unsatisfactory. In this view, this research reports the synthesis and characterization of innovative hybrid hydrogels made of carboxymethyl cellulose (CMC) and poly(vinyl alcohol) (PVA) chemically crosslinked by citric acid (CA) functionalized with silver nanoparticles (AgNPs) generated in situ using an eco-friendly aqueous process. The results assessed through comprehensive in vitro and in vivo assays demonstrated that these hybrid polymer hydrogels functionalized with AgNPs possess physicochemical properties, cytocompatibility, hemocompatibility, bioadhesion, antibacterial activity, and biocompatibility suitable for wound dressings to support chronic wound healing process as well as preventing and treating bacterial infections. Hence, it can be envisioned that, with further research and development, these polymer-based hybrid nanoplatforms hold great potential as an important tool for creating a new generation of smart dressings for treating chronic diabetic wounds and opportunistic bacterial infections.
RESUMO
Wounds result from different causes (e.g., trauma, surgeries, and diabetic ulcers), requiring even extended periods of intensive care for healing, according to the patient's organism and treatment. Currently, wound dressings generated by polymeric fibers at micro and nanometric scales are promising for healing the injured area. They offer great surface area and porosity, mimicking the fibrous extracellular matrix structure, facilitating cell adhesion, migration, and proliferation, and accelerating the wound healing process. Such properties resulted in countless applications of these materials in biomedical and tissue engineering, also as drug delivery systems for bioactive molecules to help tissue regeneration. The techniques used to engineer these fibers include spinning methods (electro-, rotary jet-), airbrushing, and 3D printing. These techniques have important advantages, such as easy-handle procedure and process parameters variability (type of polymer), but encounter some scalability problems. RJS is described as a simple and low-cost technique resulting in high efficiency and yield for fiber production, also capable of bioactive agents' incorporation to improve the healing potential of RJS wound dressings. This review addresses the use of RJS to produce polymeric fibers, describing the concept, type of configuration, comparison to other spinning techniques, most commonly used polymers, and the relevant parameters that influence the manufacture of the fibers, for the ultimate use in the development of wound dressings.
RESUMO
The prevalence of chronic and acute wounds, as well as the complexity of their treatment represent a great challenge for health systems around the world. In this context, the development of bioactive wound dressings that release active agents to prevent infections and promote wound healing, appears as the most promising solution. In this work, we develop an antibacterial and biocompatible wound dressing material made from coaxial electrospun fibers of poly(styrene-co-maleic anhydride) and poly(vinyl alcohol) (PSMA@PVA). The coaxial configuration of the fibers consists of a shell of poly (styrene-co-maleic anhydride) containing a variable concentration of silver nanoparticles (AgNPs) 0.1-0.6 wt% as antibacterial agent, and a core of PVA containing 1 wt% allantoin as healing agent. The fibers present diameters between 0.72 and 1.7 µm. The release of Ag+ in a physiological medium was studied for 72 h, observing a burst release during the first 14 h and then a sustained and controlled release during the remaining 58 h. Allantoin release curves showed significant release only after 14 h. The meshes showed an antibacterial activity against Pseudomonas aeruginosa and Bacillus subtilis that correlates with the amount of AgNPs incorporated and the release rate of Ag+. Indeed, meshes containing 0.3 and 0.6 wt% of AgNPs showed a 99.99% inhibition against both bacteria. The adherence and cell viability of the meshes were evaluated in mouse embryonic fibroblasts NIH/3T3, observing a significant increase in cell viability after 72 h of incubation accompanied by a reduced adhesion of fibroblasts that decreased in the presence of the active agents. These results show that the material prepared here is capable of significantly promoting fibroblast cell proliferation but without strong adherence, which makes it an ideal material for wound dressings with non-adherent characteristics and with potential for wound healing.
Assuntos
Nanopartículas Metálicas , Álcool de Polivinil , Animais , Bandagens , Proliferação de Células , Fibroblastos , Maleatos , Anidridos Maleicos , Camundongos , Poliestirenos , Prata , EstirenoRESUMO
Ideal wound dressings should be biocompatible, exhibit high antibacterial activity, and promote blood coagulation. To impart these imperative functions, carboxymethyl-kappa-carrageenan was incorporated into poly(vinyl alcohol) nanofibers (PVA-CMKC). The antibacterial activity of the nanofibers was evaluated. Adsorption of two important blood proteins, fibrinogen and albumin, was also assessed. The adhesion and activation of platelets, and the clotting of whole blood were evaluated to characterize the ability of the nanofibers to promote hemostasis. Adhesion and morphology of both Staphylococcus aureus and Pseudomonas aeruginosa were evaluated using fluorescence microscopy and scanning electron microscopy. CMKC-containing nanofibers demonstrated significant increases in platelet adhesion and activation, percentage of coagulation in whole blood clotting test and fibrinogen adsorption, compared to PVA nanofibers, showing blood coagulation activity. Incorporating CMKC also reduces adhesion and viability of S. aureus and P. aeruginosa bacteria after 24 h of incubation. PVA-CMKC nanofibers show potential application as dressings for wound healing applications.
Assuntos
Antibacterianos/farmacologia , Coagulação Sanguínea/efeitos dos fármacos , Carragenina/farmacologia , Nanofibras/química , Cicatrização/efeitos dos fármacos , Albuminas/metabolismo , Antibacterianos/química , Bandagens , Materiais Biocompatíveis/farmacologia , Carragenina/química , Fibrinogênio/metabolismo , Humanos , Microscopia Eletrônica de Varredura/métodos , Ativação Plaquetária/efeitos dos fármacos , Álcool de Polivinil/química , Álcool de Polivinil/farmacologia , Pseudomonas aeruginosa/efeitos dos fármacos , Staphylococcus aureus/efeitos dos fármacosRESUMO
Wound dressings are devices used to stop bleeding and provide appropriate environmental conditions to accelerate wound healing. The effectiveness of wound dressing materials can be crucial to prevent deaths from excessive bleeding in surgeries and promote complete restoration of the injury. Some requirements for an ideal wound dressing are rapid hemostatic effect, high swelling capacity, antibacterial properties, biocompatibility, biodegradability, and mechanical strength. However, finding all these properties in a single material remains a challenge. In this context, nanocomposites have demonstrated an excellent capacity for this application because of their multifunctionality. One of the emerging materials used in nanocomposite manufacture is cellulose nanocrystals (CNCs), which are rod-like crystalline nanometric structures present on cellulose chains. These nanoparticles are attractive for wound healing applications because of their high aspect ratio, high mechanical properties, functionality and low density. Hence, this work aimed to present an overview of nanocomposites constituted by CNCs for wound healing applications. The review focuses on the most common materials used as matrices, the types of dressing, and their fabrication techniques. Novel wound dressings composites have improved hemostatic, swelling, and mechanical properties compared to other pure biopolymers while preserving their other biological properties. Films, nanofibers mats, sponges, and hydrogels have been prepared with CNCs nanocomposites, and in vitro and in vivo tests have proved their suitability for wound healing.
Assuntos
Hemostáticos , Nanocompostos , Nanopartículas , Antibacterianos , Bandagens , Celulose , Hemostáticos/farmacologiaRESUMO
Skin wounds are damage to the epithelial layer and the integrity of living tissue. The healing mechanism is dynamic and complex, and often treatments with wound dressings help in tissue regeneration, reducing the risk of infections. Polymeric hydrogels become good candidates for wet curing process. These materials prevent dehydration of the tissue and avoid discomfort to the patient when changing the dressing. In this short review, we demonstrate the importance of the healing process, the types of skin wounds, and the hydrogels that are potentially attractive as wound dressings.
Assuntos
Bandagens , Hidrogéis , Humanos , Polímeros , CicatrizaçãoRESUMO
This study presents a new antibiotic-anesthetic film (AA-film) based on natural polyelectrolytes ionically complexed with lidocaine and ciprofloxacin to manage pain associated with infected wounds. The rational selection of the components resulted in the AA-films being transparent, compatible with wound skin pH and highly water vapor permeable. The drug release properties evaluated in saline solution and water revealed an ionic exchange mechanism for the release of both drugs and showed that ciprofloxacin acts as a cross-linker, as was confirmed by rheological evaluation. The in vitro antimicrobial efficacy against S. aureus and P. aeruginosa was demonstrated. Furthermore, AA-films exhibit a high fluid absorption capacity and act as a physical barrier for microorganisms. This work highlights the great potential of this smart system as an attractive dressing for skin wounds, surpassing currently available treatments.
Assuntos
Alginatos , Ciprofloxacina , Antibacterianos/uso terapêutico , Lidocaína , Staphylococcus aureus , CicatrizaçãoRESUMO
Materials used for wound care have evolved from simple covers to functional wound dressings with bioactive properties. Electrospun nanofibers show great similarity to the natural fibrillar structure of skin extracellular matrix (ECM); therefore, by mimic, the morphology of ECM, nanofibers show high potential for facilitating the healing of skin injuries. Besides morphology, scaffold composition is another important parameter in the production of bioactive wound dressings. Collagen type I is the main structural protein of skin ECM is biocompatible, biodegradable, and its extraction from animal sources is relatively simple. The fabrication of electrospun wound dressings based on collagen and its blends have been studied for skin tissue engineering applications. This review focus on the new advances of collagen electrospun materials for skin wound treatment. It summarizes the recent research on pristine collagen, collagen blends, and collagen surface modifications on nanofibers mats. Finally, the strategies for three-dimensional nanofibers production will also be discussed.
Assuntos
Colágeno/farmacologia , Pele/patologia , Engenharia Tecidual , Alicerces Teciduais/química , Cicatrização/efeitos dos fármacos , Animais , Colágeno/química , Humanos , Pele/efeitos dos fármacosRESUMO
The development of hydrogel films for biomedical applications is interesting due to their characteristics. Hydrogel films based on gelatin and poly(vinyl alcohol) (PVA) are developed and characterized using a rotatable central composite design. The optimized hydrogel film is obtained by the function desirability of the Statistica® software and is also characterized by swelling kinetics, oxygen permeability, adhesiveness, TGA, DSC, and XRD. The results of the experimental design show that gelatin and PVA concentrations have a significant influence on the response variables, and the exposure doses to UV light show no significant effect. The optimized hydrogel film is elastic, presents good mechanical resistance and swelling capacity in water and exudate solution, is permeable to oxygen, and is capable of adjusting itself and maintains contact close to the skin. In this way, considering all the properties evaluated, the optimized film has characteristics suitable for biomedical applications as wound dressings.
Assuntos
Materiais Biocompatíveis/farmacologia , Gelatina/farmacologia , Álcool de Polivinil/farmacologia , Cicatrização/efeitos dos fármacos , Bandagens , Gelatina/química , Humanos , Hidrogéis/farmacologia , Metilgalactosídeos/farmacologia , Oxigênio , Álcool de Polivinil/química , Projetos de Pesquisa , Pele , Raios UltravioletaRESUMO
Chronic wounds constitute a serious public health problem, and developing pharmaceutical dosage forms to ensure patient comfort and safety, as well as optimizing treatment effectiveness, are of great interest in the pharmaceutical, medical and biomaterial fields. In this work, the preparation of films based on blends of poly(vinyl alcohol), starch and poly(acrylic acid), polymers widely used as pharmaceutical excipients, and pomegranate peel extract (PPE), a bioactive compound with antimicrobial and healing activities relevant to the use as a bioactive wound dressing, was proposed. Initially, the minimum inhibitory concentration (MIC) of the PPE was investigated by an in vitro method. Then, the best concentration of the PPE to be used to prepare the films was researched using an antimicrobial susceptibility test with the disc diffusion method. The microbiological assay was performed in films prepared by the solvent casting method in the presence of two concentrations of PPE: 1.25% w/v and 2.5% w/v. Films containing the lower PPE concentration showed antimicrobial activity against Staphylococcus aureus and Staphylococcus epidermidis, with a difference that was not considered statistically significant when compared to the higher concentration of the extract. Therefore, the films prepared with the lower proportion of PPE (1.25% w/v) were considered for the other studies. The miscibility and stability of the extract in the films were investigated by thermal analysis. Parameters that determine the barrier properties of the films were also investigated by complementary techniques. Finally, in vitro biological tests were performed for safety evaluation and activity research. Analysis of the results showed that the incorporation of the higher proportion of starch in the blend (15% v/v) (PVA:S:PAA:PPE4) yielded smooth, transparent, and domain-free films without phase separation. Additionally, the PVA:S:PAA:PPE4 film presented barrier properties suitable for use as a cover. These films, when subjected to the in vitro hemolytic activity assay, were nonhemolytic and biocompatible. No toxicity from the extract was observed at the concentrations studied. The results of the wound healing in vitro test showed that films containing 1.25% PPE are efficient in reducing the scratch open area, provoking almost total closure of the scratches within 48 h without cytotoxicity.
Assuntos
Antibacterianos/química , Bandagens , Membranas Artificiais , Álcool de Polivinil/química , Punica granatum/química , Amido/química , Animais , Linhagem Celular , Camundongos , Staphylococcus aureus/crescimento & desenvolvimento , Staphylococcus epidermidis/crescimento & desenvolvimentoRESUMO
A smart antibacterial biomaterial based on a keratin hydrogel with pH-dependent behavior and Zinc Oxide nanoplates as biocide agent has been developed. The pH of a chronic wound is basic due to bacterial metabolism. Originally shrank at acid pH, keratin hydrogels swell upon contact with a bacterial contaminated media leading to the release of the nanoparticles. The material has been thoroughly characterized by infrared spectroscopy, Raman, scanning electron microscope, swelling behavior, Differential scanning calorimetry, Small-angle X-ray scattering, rheology, antimicrobial activity and cytotoxicity. The results show that 5% of Zinc Oxide nanoparticles concentration is the optimum for wound dressing applications.
Assuntos
Antibacterianos/farmacologia , Escherichia coli/efeitos dos fármacos , Hidrogéis/farmacologia , Queratinas/farmacologia , Nanopartículas/química , Staphylococcus aureus/efeitos dos fármacos , Óxido de Zinco/farmacologia , Animais , Sobrevivência Celular/efeitos dos fármacos , Células Cultivadas , Chlorocebus aethiops , Hidrogéis/química , Concentração de Íons de Hidrogênio , Queratinas/química , Testes de Sensibilidade Microbiana , Células Vero , Óxido de Zinco/químicaRESUMO
We report the synthesis and in vitro evaluation of dual-function chitosan-silver nanoparticles (CTS-AgNPs) films with potential applications as wound dressings. We attempted to formulate nanocomposite films with appropriate AgNPs concentrations to simultaneously display antibacterial activity and suitability for cell culture. Nanocomposites were obtained by CTS-mediated in situ chemical reduction of AgNO3. Circular-shape AgNPs (sizes ca. 7-50â¯nm) well distributed within the CTS matrices were obtained in concentrations from 0.018 to 0.573â¯wt%. Efficacy (bacteriostatic and bactericidal properties) of CTS-AgNPs films to decrease planktonic and biofilm bacterial growth was AgNPs concentration- and bacteria strain-dependent. Films showed significant antibacterial activity against Gram-negative E. coli and P. aeruginosa and Gram-positive S. aureus. Antibacterial activity against S. epidermidis was moderated. Films suitability for cell culture was characterized using primary human fibroblasts (HF). HF displayed cell viability higher than 90% and the characteristic fusiform morphology of adhered fibroblast upon culture on films with AgNPs concentrationâ¯≤â¯0.036â¯wt%. HF cultured on these films also showed positive expression of tropoelastin, procollagen type I and Ki-67, characteristic proteins of extracellular matrix and proliferative cells, respectively. In vitro assays demonstrated that cytocompatibility/antibacterial properties decreased/increased as silver concentration increased, suggesting that CTS-AgNPS nanocomposite films with ≈0.04-0.20â¯wt% might be considered as potential temporary dual-function wound dressings.
Assuntos
Bandagens , Quitosana/farmacologia , Nanocompostos/química , Prata/farmacologia , Ferimentos e Lesões/terapia , Antibacterianos/farmacologia , Bactérias/efeitos dos fármacos , Bactérias/crescimento & desenvolvimento , Sobrevivência Celular/efeitos dos fármacos , Colágeno Tipo I/metabolismo , Contagem de Colônia Microbiana , Fibroblastos/citologia , Fibroblastos/efeitos dos fármacos , Humanos , Antígeno Ki-67/metabolismo , Masculino , Testes de Sensibilidade Microbiana , Viabilidade Microbiana/efeitos dos fármacos , Nanocompostos/ultraestrutura , Espectrofotometria Ultravioleta , Tropoelastina/metabolismo , ÁguaRESUMO
Biopolymeric films can be used as dressings for the treatment of skin burns and other chronic wounds. The healing properties of these films may be enhanced by the addition of Copaiba oil (Copaifera L.) which properties have already been well-described. The aim of this study was to evaluate the addition of Copaiba oil in chitosan films prepared by casting solvent evaporation technique using chitosan solution (2% or 1% wt/wt) and Copaiba oil (0.1 or 1.0% wt/wt) at different concentrations. Films were characterized by color analysis, scanning electron microscopy, mechanical properties, thermal analysis, and fluid handling capacity. The developed films demonstrated potential for wound dressing, translated by the fluid handling capacity similar to that of commercial dressings. While no surfactant was present in the formulation, the droplets of Copaiba oil were well-dispersed and homogeneously distributed in the chitosan matrix even after drying. The thermal analysis translated the occurrence of interactions between the oil and chitosan.
Assuntos
Quitosana/química , Preparações de Plantas/administração & dosagem , Solventes/química , Cicatrização/efeitos dos fármacos , Bandagens , Química Farmacêutica/métodos , Portadores de Fármacos/química , Microscopia Eletrônica de Varredura , Preparações de Plantas/químicaRESUMO
This work is a continuation of a previous study which described the development of dense and porous chitosan-alginate polyelectrolyte complexes through the addition of different amounts of Pluronic F68 to the polymeric mixture. The present study consisted in the incorporation of an antimicrobial agent, polyhexamethylene biguanide (PHMB), to the previously developed system. PHMB was incorporated at 1 and 10% (w/w) with high incorporation efficiencies, varying from 72 to 86%. Release profiles in phosphate buffered saline were evaluated using the Korsmeyer-Peppas equation, which suggested a quasi-Fickian diffusion mechanism for all obtained formulations. The maximum release percentage was approximately 15% as a result from the high affinity between PHMB and the polysaccharides. The obtained polyelectrolyte complexes were able to prevent the growth of both Staphylococcus aureus and Pseudomonas aeruginosa on their surfaces, being considered potentially effective wound dressings.