RESUMO

In this study, chloroquine resinates were prepared at a 1:1 (w:w) drug-to-resin ratio using the batch method with polacrilex (PC), sodium polystyrene sulfonate (SPS), and polacrilin potassium (PP) ion exchange resins (IER). The influence of drug/resin ratio and pH of the medium on drug loading efficiency was explored. UV-VIS spectrophotometric analysis showed that SPS resin had high loading efficiency for chloroquine diphosphate (CLP), above 89%, regardless of the pH. PP resin was more effective at pH 5.0 (90.68%) than at pH 1.0 (2.09%), and PC resin had only 27.63% of CLP loading efficiency. CLP complexation with IER yielded amorphous mixtures according to results from differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD), thus indicating drug-resin interaction. The taste masking efficiency was evaluated with in vitro methods using an adapted dissolution test and an electronic tongue system. During dissolution tests, SPS released only 1.0% of CLP after 300 s, while PP released over 10% after 90 s in simulated saliva solution. The electronic tongue distinguished the samples containing CLP, resins, and resinates by using multidimensional projection techniques that indicated an effective drug taste masking. In an accelerated stability study, the drug contents did not decrease in chloroquine resinates, and there was no physical degradation of the resinates after 60 days. Using chloroquine resinates therefore represents a novel way to evaluate taste masking in vitro which is relevant for the early formulation development process.

Assuntos

RESUMO

The aim of this study was to determine the influence of ion-exchange resin treatments of white grape must for the production of sparkling base wines, on the grape must chemical composition and fermentation kinetics. The experiment included an untreated grape must with a pH of 3.2, and resin-treated musts with pH 3.14, 3.07, and 3.01. Analysis of pH, total acidity, optical density (O.D.) at 420 nm, total phenolic content, tartaric acid, ammonium-nitrogen (AN) and cations (Ca2+, Mg2+, Cu2+, K+, and Na+) was performed. The fermentations were monitored by mass reduction (CO2 release g/L), and fermentation parameters obtained from a modified non-linear sigmoidal equation. The analyses of the musts showed differences in the concentration of metals, total acidity, tartaric acid, AN and O.D. 420 nm. The kinetic parameters of the fermentation showed significant changes between the control must and the ion-exchange treatments. This study showed that the treatment with cationic resins at the tested level significantly affects the chemical composition of the musts, interfering with the fermentation kinetics. In addition, reductions in the must pH index close to 0.1 unit can lead to positive results in the characteristics of the base must of sparkling wines.

RESUMO

SUMMARY Sodium polystyrene sulfonate (PSP) or Kayexalate is a cation-exchange resin, widely used in the management of hyperkalaemia due to renal disease. A rare, yet potentially dangerous, adverse event related to sodium polystyrene sulfonate use is intestinal mucosal injury, especially in the colon. The injury to the gastrointestinal mucosa can range from mild and superficial to wall necrosis and bowel perforation. The mechanism that leads to mucosal damage remains unclear. However, it is believed that sorbitol, commonly given to counteract PSP's tendency to cause constipation, may play an important role in the development of gastrointestinal injury. Other potential risk factors are uraemia or end-stage renal disease, hemodynamic instability, solid organ transplantation, postoperative status and concomitant opioid administration. The authors present a case of diarrhoea and haematochezia after the administration of PSP without sorbitol, in a patient with hyperkalaemia due to acute kidney injury, in the absence of other risk factors. A colonoscopy was performed and revealed a rectal ulcer which histological findings were suggestive of mucosal injury due to Kayexalate deposition. This case supports the concept that this widely used drug can itself, without sorbitol, cause injury to the gastrointestinal wall. Even though this is a rare adverse effect, the widespread use of this medication may put a large population at risk.

RESUMO O polistireno sulfonato de sódio (PSP) ou kayexalato é uma resina de troca iônica, amplamente usada no tratamento da hipercalemia associada à doença renal. Um efeito adverso raro, mas potencialmente grave, dessa terapêutica é a agressão à parede do trato gastrointestinal, principalmente ao nível do cólon, que pode ser ligeira e superficial ou culminar em necrose e perfuração intestinal. O mecanismo pelo qual o PSP lesa a mucosa intestinal não é totalmente conhecido. Contudo, pensa-se que o sorbitol, frequentemente administrado em simultâneo para contrabalançar o efeito obstipante do PSP, possa ter um papel preponderante no desenvolvimento de lesão gastrointestinal. Outros potenciais fatores de risco são a presença de uremia ou doença renal em estágio terminal, instabilidade hemodinâmica, pós-operatório, pós-transplante renal e a administração concomitante de opioides. Os autores descrevem um caso de diarreia e hematoquesias após a administração de PSP sem sorbitol, numa paciente com hipercalemia secundária a lesão renal aguda, sem outros fatores de risco para o desenvolvimento desse efeito adverso. A investigação etiológica com colonoscopia revelou a presença de uma úlcera retal, cujo estudo histológico foi compatível com lesão por deposição de cristais de kayexalato. Este relato incomum reforça o conceito de que este fármaco de uso frequente, mesmo na ausência de sorbitol, pode ser lesivo para a mucosa intestinal. Assim, e apesar de este ser um efeito adverso raro, a utilização difundida do PSP coloca uma vasta população em risco.

Assuntos

RESUMO

The oil refinery industry seeks solutions to reduce its water uptake and consumption by encouraging the reuse of internal streams and wastewater from treatment systems. After conventional treatment the petroleum refinery wastewater still contains a considerable quantity of recalcitrant organics and the adsorption on activated carbon is currently used in Brazilian refineries, although it is still expensive due to the difficulty of its regeneration. This study evaluated the use of adsorbent and ion exchange resins for the removal of organic matter from refinery wastewater after conventional treatment in order to verify its feasibility, applying successive resin regenerations and comparing the results with those obtained for activated carbon process. Adsorption isotherms experiments were used to evaluate commercial resins, and the most efficient was subjected to column experiments, where absorbance (ABS) and total organic carbon (TOC) removal were measured. The adsorption isotherm of the best resin showed an adsorptive capacity that was 55% lower than that of activated carbon. On the other hand, the column experiments indicated good removal efficiency, and the amount of TOC in the treated wastewater was as good as has been reported in the literature for activated carbon. The regeneration efficiency of the retained organics ranged from 57 to 94%, while regenerant consumption ranged from 12 to 79% above the amount recommended by the resin supplier for the removal of organic material from natural sources, showing the great resistance of these recalcitrant compounds to desorption. Finally, an estimate of the service life of the resin using intermediate regeneration conditions found it to be seven times higher than that of activated carbon when the latter is not regenerated.

Assuntos

RESUMO

Polystyrene divinylbenzene-based ion exchange resins are employed extensively within nuclear power plants (NPPs) and research reactors for purification and chemical control of the cooling water system. To maintain the highest possible water quality, the resins are regularly replaced as they become contaminated with a range of isotopes derived from compromised fuel elements as well as corrosion and activation products including 14C, 60Co, 90Sr, 129I, and 137Cs. Such spent resins constitute a major proportion (in volume terms) of the solid radioactive waste generated by the nuclear industry. Several treatment and conditioning techniques have been developed with a view toward reducing the spent resin volume and generating a stable waste product suitable for long-term storage and disposal. Between them, pyrolysis emerges as an attractive option. Previous work of our group suggests that the pyrolysis treatment of the resins at low temperatures between 300 and 350 °C resulted in a stable waste product with a significant volume reduction (>50%) and characteristics suitable for long-term storage and/or disposal. However, another important issue to take into account is the complexity of the off-gas generated during the process and the different technical alternatives for its conditioning. Ongoing work addresses the characterization of the ion exchange resin treatment's off-gas. Additionally, the application of plasma technology for the treatment of the off-gas current was studied as an alternative to more conventional processes utilizing oil- or gas-fired post-combustion chambers operating at temperatures in excess of 1000 °C. A laboratory-scale flow reactor, using inductively coupled plasma, operating under sub-atmospheric conditions was developed. Fundamental experiments using model compounds have been performed, demonstrating a high destruction and removal ratio (>99.99%) for different reaction media, at low reactor temperatures and moderate power consumption. The role of H2O as an important participant of the oxidation mechanisms in plasma conditions was established. The combination of both processes could represent a simple, safe, and effective alternative for treating spent ion exchange resins with a large reduction of generated gaseous byproducts in fuel cycle facilities where processes that utilize open flames are undesirable.

Assuntos

RESUMO

Esta investigación tuvo por objetivo obtener una bio-resina intercambiadora de cationes utilizando cáscaras de guineo o plátano, la cual reduzca la concentración de metales pesados en agua contaminada. A esta bio-resina se le realizaron pruebas fisicoquímicas: densidad seca aparente, pH y solubilidad en agua y solventes orgánicos. Se evaluó su efectividad filtrando agua contaminada con metales pesados, tales como hierro, cromo y níquel (Fe3+, Cr6+ y Ni2+), variando las condiciones de tiempo de contacto, temperatura y el tipo de cáscara. La cuantificación de la concentración de los metales en el agua filtrada se llevó a cabo por espectrofotometría visible. Se llegó a la conclusión que la bio-resina obtenida es efectiva para disminuir la concentración de metales pesados en agua, teniendo especial afinidad química por el cromo hexavalente; metal pesado que logró remover arriba del 90%. Las condiciones óptimas de operación de la bio-resina son a 30°C y 90 minutos de tiempo de contacto con la muestra. Además, las pruebas fisicoquímicas, permitieron tipificarla preliminarmente como una resina de intercambio catiónico débil con un grado de entrecruzamiento bajo.

This research aimed to obtain a cation exchange bio-resin, using plantain or banana peels, that reduces the concentration of heavy metals in contaminated water. The bio-resin underwent physico-chemical tests like apparent dry density, pH, solubility in water and organic solvents. Its effectiveness was tested by filtering contaminated water with heavy metals such as iron, chromium and nickel (Fe3+, Cr6+ y Ni2+) and by varying contact time conditions, temperature and type of peel. The measure of concentration of metals in filtered water was taken through visible spectrophotometry. We concluded that the resulting bio-resin is effective in reducing the concentration of heavy metals in water, showing special chemical affinity with hexavalent chromium, a heavy metal that was able to remove above 90%. The bio-resin optimum working conditions are 30°C and 90 minutes of contact with the sample. Also, the physico-chemical tests allowed to preliminary typify it as a weak cation exchange resin with a low degree of crosslinking.

Assuntos

RESUMO

The present study involves preparation and characterization of a combination tablet of ranitidine in immediate release form and domperidone in sustained release form, using ion exchange resins. Ranitidine lowers acid secretion, while domperidone release over a prolonged period improves gastric motility thus justifying this combination in gastro esophageal reflux diseases (GERD) and ensuring patient compliance. Drug loading was carried out by batch method & resinates were characterized using FTIR, XRPD. Resinates were formulated as a combination tablet and evaluated for tablet properties & in vitro drug release. Resinates provided sustained release of domperidone and immediate release of ranitidine. IR and X-ray studies indicate complexation of drug and resin along with monomolecular distribution of drugs in amorphous form in the resin matrix. The tablets of resinate combination showed good tablet properties. In-vitro drug release gave desired release profiles and ex-vivo drug absorption studies carried out by placing everted rat intestine in dissolution medium indicated statistically significant similarity in absorption from test and marketed formulation. The novelty of this study is that the retardation in release of domperidone from resinates is achieved by presence of weak resin in the formulation.

O presente estudo envolve a preparação e a caracterização de associação do comprimido de ranitidina de liberação imediata e domperidona de liberação prolongada, utilizando resinas de troca iônica. A ranitidina diminui a secreção ácida, enquanto a liberação prolongada de domperidona melhora a motilidade gástica, justificando, dessa forma, a associação em doenças de refluxo gastroesofágico (DRGE) e garantindo a adesão do paciente. A carga de fármaco foi efetuada pelo método em batelada e os resinatos, caracterizados utilizando-se FTIR e XRPD. Os resinatos foram formulados como comprimido da associação e avaliados com relação às propriedades dos comprimidos e liberação do fármaco in vitro. Os resinatos proporcionaram a liberação prolongada da domperidona e a liberação imediata da ranitidina. IV e estudos de difração de raios X indicaram a complexação do fármaco e da resina junto com a distribuição monomolecular dos fármacos, em estado amorfo, na matriz da resina. Os comprimidos da associação do resinato apresentaram boas propriedades. Obtiveram-se os perfis de liberação in vitro e os estudos de absorção dos fármacos ex vivo realizados com intestino de rato em meio de dissolução indicaram semelhança significativa na absorção entre as formulações teste e comercializada. A inovação do trabalho é que o retardamento da liberação da domperidona dos resinatos é atingido pela presença de resina fraca na formulação.

Assuntos