RESUMO

The Coastal Creole pigs in Argentina are predominantly found in the wild and can trace their lineage directly back to the Iberian breeds introduced by Spanish colonizers. They currently stand as the sole Creole breed in the country recognized by the FAO. However, there exists a dearth of studies assessing their genetic potential within the swine industry. Therefore, this study aimed to genetically characterize the meat quality of Coastal Creole pigs based on seven single nucleotide polymorphisms (SNPs) within the Ryr1, PRKAG3, MC4R, H-FABP, and CAST genes. A total of N = 158 samples were collected from specimens distributed along the coastal region. Our findings revealed all loci to exhibit polymorphism, underscoring the population's remarkable genetic diversity. Furthermore, a higher frequency of alleles favorable for the PRKAG3191I>V/200R>Q, MC4R1426A>G, CAST76872G>A, and Ryr11843C>T genes was observed, while alleles unfavorable predominated for H-FABP1811G>C and CAST638Ser>Arg. The results obtained in this research are highly encouraging, reflecting the genetic potential of these pigs to be utilized in swine production programs.

Assuntos

RESUMO

Conducting polymers used in chemical sensors are attractive because of their ability to confer reversible properties controlled by the doping/de-doping process. Polyaniline (PANI) is one of the most prominent materials used due to its ease of synthesis, tailored properties, and higher stability. Here, PANI thin films deposited by the drop-casting method on fluorine-doped tin oxide (FTO) substrates were used in electrochemical and optical sensors for pH measurement. The response of the devices was correlated with the deposition parameters; namely, the volume of deposition solution dropped on the substrate and the concentration of the solution, which was determined by the weight ratio of polymer to solvent. The characterisation of the samples aimed to determine the structure-property relationship of the films and showed that the chemical properties, oxidation states, and protonation level are similar for all samples, as concluded from the cyclic voltammetry and UV-VIS spectroscopic analysis. The sensing performance of the PANI film is correlated with its relative physical properties, thickness, and surface roughness. The highest electrochemical sensitivity obtained was 127.3 ± 6.2 mV/pH, twice the Nernst limit-the highest pH sensitivity reported to our knowledge-from the thicker and rougher sample. The highest optical sensitivity, 0.45 ± 0.05 1/pH, was obtained from a less rough sample, which is desirable as it reduces light scattering and sample oxidation. The results presented demonstrate the importance of understanding the structure-property relationship of materials for optimised sensors and their potential applications where high-sensitivity pH measurement is required.

RESUMO

High-oleic palm oil is a food-grade oil with desirable properties, as it is characterised by having an oleic acid concentration above 50 % and a high vitamin E and provitamin A content. This study investigated the effect of different combinations of two wall materials (whey protein (WP) and Capsul®, a commercial octenyl succinic anhydride modified starch (OSA-MS)) on the concentration of provitamin A, vitamin E and oleic acid, and the physical properties of high oleic palm oil emulsions encapsulated by Refractance Window drying technology. Wall material composition significantly affected (p < 0.05) all response variables, and R2 values were above 0.75 for all responses. Phytonutrient preservation showed its highest at an OSA-MS: WP concentration ratio of 1: 3. Optimal results were achieved (minimum moisture content, water activity and hygroscopicity, and maximum encapsulation efficiency and phytonutrient preservation) at an OSA-MS concentration of 8.13 % and WP concentration of 91.87 %. Flakes were obtained as a solid structure that protects oil's phytonutrients with 94 %, 75 % and 87 % of preservation of oleic acid, vitamin E and carotenoids, respectively. It shows that the wall material combination and encapsulation technique are suitable for obtaining lipophilic functional compounds.

RESUMO

The aim of this study was to compare the clinical effectiveness and complications of different treatment modalities for elderly patients with distal radius fracture (DRF). METHODS: We performed a network meta-analysis (NMA) of randomized clinical trials (RCTs). Eight databases were searched. The eligibility criteria for selecting studies were RCTs that compared different treatment modalities (surgical or nonoperative) in patients older than 60 years with displaced or unstable intra-articular and/or extra-articular DRFs. RESULTS: Twenty-three RCTs met the eligibility criteria (2020 patients). For indirect comparisons, the main findings of the NMA were in volar locking plate (VLP) versus cast immobilization, with the mean differences for the patient-rated wrist evaluation (PRWE) questionnaire at -4.45 points (p < 0.05) and grip strength at 6.11% (p < 0.05). Additionally, VLP showed a lower risk ratio (RR) of minor complications than dorsal plate fixation (RR: 0.02) and bridging external fixation (RR: 0.25). Conversely, VLP and dorsal plate fixation showed higher rates of major complications. CONCLUSIONS: Compared with other treatment modalities, VLP showed statistically significant differences for some functional outcomes; however, most differences were not clinically relevant. For complications, although most differences were not statistically significant, VLP was the treatment modality that reported the lowest rate of minor and overall complications but also showed one of the highest rates of major complications in these patients. PROSPERO Registration: CRD42022315562.

Assuntos

RESUMO

BACKGROUND: Elbow immobilization due to fractures of the upper limb is frequent in paediatric patients. Proper follow-up is critical to assess elbow functional recovery. Telemedicine can be an option for remote monitoring of these patients. The purpose of this study was to compare personal and virtual evaluation of elbow range of motion after long arm cast withdrawal in paediatric patients. METHODS: An observational cross-sectional study was carried out which included all paediatric patients with elbow immobilization in long arm casts treated at our centre. After cast withdrawal, elbow range of motion was evaluated by telemedicine and in office consultation in all four movements (flexion, extension, pronation and supination). RESULTS: Ninety-three patients met the selection criteria. Median age at time of immobilization was 8 years. Mean elbow immobilization time was 23 days (range 18-56 days). When comparing office and remote measurements, no statistical differences were found for any of the four elbow movements measured in our study. CONCLUSIONS: Remote evaluation of elbow range of motion by telemedicine is technically feasible. We evaluated elbow range of motion in paediatric patients after immobilization and we did not find differences between digital and in office measurements. The results were similar to those obtained through assessment in the office. We believe that this is a useful tool to facilitate remote patient follow-up.

Assuntos

RESUMO

In order to add value to the beach-cast Sargassum cymosum algae, its biomass was converted by pyrolysis process at 800°C into biochar, characterized and applied in the adsorption of Acetaminophen in batch and fixed-bed processes. Characterization by pH, Point of Zero Charge (pHPZC), Fourier-Transform Infrared Spectroscopy (FTIR), Thermogravimetric (TG), Scanning Electron Microscopy (SEM) and Surface area (BET) showed that the biochar presents properties favourable for the Acetaminophen adsorption. High surface area was obtained of 368.1 m². g-1, presenting the formation of pores, observed by SEM. The biochar showed basic characteristics (pH = 8.84 and pHPZC = 9.9), inferring an adsorption involving several different mechanisms such as dispersive interactions by π electrons, electrostatic attractions, and hydrophobic interactions. The adsorption mechanism is limited by chemisorption and governed by the formation of monolayer on the biochar surface, the Pseudo-second order kinetic and Langmuir-Freundlich isotherm model described the best behaviour of batch adsorption, with equilibrium and maximum adsorption capacity qe = 6.93 ± 0.07 mg. g-1 and qms = 12.34 ± 0.45 mg. g-1, respectively. Fixed-bed adsorption were performed varying adsorbent mass (0.3 and 0.6 g) and flow rate (2.5 and 5.0 mL. min-1), the best qy = 42.33 mg. g-1 found to adsorbent mass of 0.6 g and flow rate of 2.5 mL. min-1. Yan model described the best behaviour of the breakthrough curves data. Thus, the results provide insights into the development of adsorbents from beach-cast of Sargassum cymosum to adsorption of Acetaminophen, enhancing the use of environmental waste to obtain it.

Assuntos

RESUMO

The assessment of rehabilitation outcomes requires a patient documentation protocol, including records obtained at standardized ages, to compare different types of surgeries, their effects, as well as between different rehabilitation centers. The aim of this paper was to present proper trays for babies with different types of cleft lip and palate, which are used in the outpatient routine at Hospital of Rehabilitation of Craniofacial Anomalies/USP (HRAC/USP). The customized trays are made with self-curing acrylic resin. The tray must have suitable depth to copy the buccal sulcus, and wax is usually applied to contour the tray edge, and the adjustment of the tray to the fornix, making the tray specific for each child. The impression precludes the utilization of dental casts for diagnosis, treatment plan, and research measurements. In the clinical practice at HRAC-USP, it was observed that customized trays increased the quality of impression, accurately reproducing anatomical features of dental arches of babies with oral clefts.

Assuntos

RESUMO

Objective: There is limited evidence about the cross-cultural validity of autistic symptoms in school-aged children in Brazil. We used data from a large school survey to evaluate the factor structure of autism symptoms in community-dwelling children and adolescents. Methods: We translated the Childhood Autism Spectrum Test to Brazilian Portuguese and performed factor analyses to investigate the factor structure of parent-reported autistic symptoms in a large sample (n=8,571) of children/adolescents from a school survey in the metropolitan area of São Paulo. Results: Autistic symptoms were best conceptualized under a correlated-factors model with two factors: one predominantly characterized by social-communication symptoms and the other by symptoms of inflexible/restricted language, behaviors, and interests. Conclusions: These findings provide evidence that the structure of autistic symptoms in Brazil is similar to that described in other countries, indicating the cross-cultural validity of autism in Brazil.

RESUMO

Tenderness is one of the main characteristics of meat because it determines its price and acceptability. This is the first bibliometric study on the trend of research on the role of genes in meat tenderness. A total of 175 original and English-language articles published up to 2021 were retrieved from Scopus. The bibliometric analysis was carried out with VOSviewer (version 1.6.18, Eck and Waltman, Leiden, Netherlands) and complemented with the Analyze search results service from Scopus. Erroneous and duplicate data were eliminated, and incomplete information was added to standardize the results. Scientific production was evaluated by means of quantity, quality and structure indicators. As a first glance, 8.816% of authors have published more than 50% of papers mainly related to genes encoding the calpain (CAPN)-calpastatin (CAST) system and single nucleotide polymorphisms (SNPs). Among other findings, a strong link was found between the contribution of the main countries (led by the United States with) and their institutions (led by the USDA Agricultural Research Service with) to their gross domestic product. Most studies on the topic are published in the Journal of Animal Science, and other journals with high impact according to the number of citations and different metrics. Finally, when evaluating the most cited articles, the occurrence and association of the main keywords, it was confirmed that research is focused on the role of CAPN and CAST genes and of SNPs in beef tenderness. The change in science was emphasized; although marker-assisted selection is still used, genes have an infinitesimal effect on complex traits. Therefore, since about 2010, new research groups adopted genomic selection to evaluate dense panels of SNPs and better explain genetic variation in meat tenderness.

RESUMO

OBJECTIVE: There is limited evidence about the cross-cultural validity of autistic symptoms in school-aged children in Brazil. We used data from a large school survey to evaluate the factor structure of autism symptoms in community-dwelling children and adolescents. METHODS: We translated the Childhood Autism Spectrum Test to Brazilian Portuguese and performed factor analyses to investigate the factor structure of parent-reported autistic symptoms in a large sample (n=8,571) of children/adolescents from a school survey in the metropolitan area of São Paulo. RESULTS: Autistic symptoms were best conceptualized under a correlated-factors model with two factors: one predominantly characterized by social-communication symptoms and the other by symptoms of inflexible/restricted language, behaviors, and interests. CONCLUSIONS: These findings provide evidence that the structure of autistic symptoms in Brazil is similar to that described in other countries, indicating the cross-cultural validity of autism in Brazil.

Assuntos

RESUMO

BACKGROUND: Acute treatment for distal radius fractures, the most frequent fractures in the pediatric population, represents a challenge to the orthopedic surgeon. Deciding on surgical restoration of the alignment or cast immobilization without reducing the fracture is a complex concern given the remodeling potential of bones in children. In addition, the lack of evidence-based safe boundaries of shortening and angulation, that will not jeopardize upper-extremity functionality in the future, further complicates this decision. OBJECTIVE: The authors aim to measure functional outcomes, assessed using the Patient-Reported Outcomes Measurement Information System (PROMIS) Pediatric Physical Function v2.0 instrument. The authors hypothesize that outcomes will not be worse in children treated with cast immobilization in situ compared with those treated with closed reduction with or without percutaneous fixation. The authors also aim to compare the following as secondary outcomes: ulnar variance and fracture alignment in the sagittal and coronal planes, range of motion, pressure ulcers, pain control, radius osteotomy due to deformity, pseudoarthrosis cure, and remanipulation. METHODS: This is the protocol of a randomized noninferiority trial comparing upper-extremity functionality in children aged 5 to 10 years, after sustaining a distal radius fracture, treated with either cast immobilization in situ or closed reduction with or without fixation in a single orthopedic hospital. Functional follow-up is projected at 6 months, while clinical and radiographic follow-up will occur at 2 weeks, 3 months, and 9 months. RESULTS: Recruitment commenced in July 2021. As of January 2022, 23 children have been randomized. Authors expect an average of 5 patients to be recruited monthly; therefore, recruitment and analysis should be complete by October 2024. CONCLUSIONS: This experimental design that addresses upper-extremity functionality after cast immobilization in situ in children who have sustained a distal fracture of the radius may yield compelling information that could aid the clinician in deciding on the most suitable orthopedic treatment. TRIAL REGISTRATION: ClinicalTrials.gov NCT05008029; https://clinicaltrials.gov/ct2/show/NCT05008029. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/34576.

RESUMO

Open-cast iron mining causes drastic disturbances in soil properties. Recovery of soil chemical and physical properties is essential for successful revegetation and landscape rehabilitation. To identify changes in soil properties during the mining and revegetation process, soil samples were collected from undisturbed sites represented by forest and ferriferous savannas stocking above iron outcrops, called "cangas," in open-pit benches, and in rehabilitation chronosequences of iron waste piles in the Carajás Mineral Province (CMP), Eastern Amazon, Brazil. The samples were analyzed for chemical and physical properties. Our results showed that iron mining operations resulted in significant alteration of the chemical soil properties when forest and canga vegetation are suppressed to form open-pit benches or waste piles in the CMP. Mining substrates showed lower contents of soil organic matter (SOM) and nutrients than undisturbed areas of forests and cangas. In order to achieve the success of revegetation, nutrients have been added prior to plant establishment. We have demonstrated how soil fertility changes along with mineland rehabilitation, and the variation among chronosequence was attributable mainly due to contents of SOM, K, and B in the soil. The slight improvement of SOM found in rehabilitated waste piles reinforces the notion that recovery of soil quality can be a slow process in iron minelands in the CMP.

Assuntos

RESUMO

SUMMARY: A comparative study of the morphology of suboccipital cavernous sinus (SCS) using MRI and cast specimens was performed. The present retrospective study analysed the craniocervical magnetic resonance venography (MRV) imaging data of 61 patients. Three-dimensional reconstruction was performed using Mimics 19.0. The SCS left-right diameter(d1), distance from the midline (d2), supero-inferior diameter(d3), anteroposterior diameter (d4), distance from posterior diameter to skin (d5), and diameter of the SCS at different parts (d6-d8) were measured. Comparison between MRV images and cast specimens, the SCS, marginal sinus, anterior condylar vein, and vertebral artery venous plexus were symmetrical and could be bilaterally displayed, whereas the presence of extra condylar vein and posterior condylar vein exhibited different types. The adjacency between the SCS and its communicating vessels and changes in its communicating vessels corresponded well with the MRV images and cast specimens. Many types of the presence of left and right lateral condylar and posterior condylar veins were found in the cast specimens, which could be divided into the bilateral presence of posterior condylar and lateral condylar veins, unilateral presence of posterior condylar veins, and unilateral presence of lateral condylar vein. A total of 61 cases analysed using MRV images revealed the bilateral presence of posterior condylar and lateral condylar veins (77.1 %), the unilateral presence of posterior condylar vein (18.0 %), and the unilateral presence of lateral condylar vein (9.8 %), of which the bilateral presence of posterior condylar and lateral condylar veins accounted for the largest proportion. MRV images and cast specimens of the SCS showed its normal morphological structure and adjacency, thus providing accurate and complete Three-dimensional imaging anatomical data of the SCS and its communicating vascular structures. This study enriches the Chinese SCS imaging anatomy data and may be valuable in clinical practice.

RESUMEN: Se realizó un estudio comparativo de la morfología del seno cavernoso suboccipital (SCS) mediante resonancia magnética y muestras de yeso. El presente estudio retrospectivo analizó los datos de imágenes de venografía por resonancia magnética (RNM) craneocervical de 61 pacientes. La reconstrucción tridimensional se realizó con Mimics 19.0. Se midió: el diámetro izquierdo-derecho del SCS (d1), la distancia desde la línea mediana (d2), el diámetro superoinferior (d3), el diámetro anteroposterior (d4), la distancia desde el diámetro posterior hasta la piel (d5) y el diámetro del SCS en diferentes partes (d6-d8). En la comparación entre las imágenes RNM y las muestras de yeso, el SCS, el seno marginal, la vena condilar anterior y el plexo venoso de la arteria vertebral eran simétricos y se observaron bilateralmente, mientras que la presencia de la vena extracondilar y la vena condilar posterior presentaba tipos diferentes. La proximidad del SCS y sus vasos comunicantes y los cambios en sus vasos comunicantes se correspondieron bien con las imágenes de RNM y los especímenes moldeados. Se encontraron muchos tipos de venas condilares laterales y condilares posteriores izquierda y derecha en las muestras de yeso, que podrían dividirse en presencia bilateral de venas condilares posteriores y condilares laterales, presencia unilateral de venas condilares posteriores y presencia unilateral de venas condilares laterales. Un total de 61 casos analizados mediante imágenes MRV revelaron la presencia bilateral de venas condilares posteriores y condilares laterales (77,1 %), la presencia unilateral de venas condilares posteriores (18,0 %) y la presencia unilateral de venas condilares laterales (9,8 %) de los cuales la presencia bilateral de las venas condilar posterior y condilar lateral representó la mayor proporción. Las imágenes de RNM y las muestras de yeso del SCS mostraron su estructura morfológica y adyacencia normales, lo que proporcionó datos anatómicos de imágenes tridimensionales precisos y completos del SCS y sus estructuras vasculares comunicantes. Este estudio enriquece los datos de anatomía de imágenes de SCS chino y puede ser valioso en la práctica clínica.

Assuntos

RESUMO

Objetivo: O objetivo deste estudo foi responder qual é a melhor técnica para remoção de pinos de fibra de vidro e pinos metálicos fundidos considerando tempo, preservação da estrutura dentária e custos. Métodos: Foi realizado um estudo in vitro, randomizado e cego. Sessenta dentes tratados endodonticamente foram randomizados em dois grupos de acordo com o tipo de pino. Uma segunda randomização foi realizada para cada tipo de técnica de remoção (ultrassom, broca ou combinada; n=10). One-way ANOVA foi usado para comparar o tempo de remoção do pino, teste t pareado comparou a quantidade de estrutura dentária removida e Kruskal Wallis seguido pelo teste post hoc de Mann-Whitney foram usados para análise de custo (P = 0,05). Resultados: Não houve diferença no tempo de remoção do pino considerando o tipo ou técnica do pino (P=0,630). A perda média de estrutura dentária na região cervical foi superior a 30% quando apenas uma ponta diamantada foi usada para remover pino de fibra de vidro (P<0,00001) e pino metálico fundido (P=0,008). Conclusão: De acordo com os resultados deste estudo, podemos concluir que a seleção da técnica de remoção dependerá da habilidade do operador, e sempre ocorrerá alguma perda de estrutura dentária, embora seja esperada uma perda maior quando apenas pontas diamantadas são usadas para este fim.(AU)

Objective: The aim of this study was to answer which is the best technique to removing glass fiber post and cast metal post considering time, preservation of tooth structure, and costs. Methods: An in vitro, randomized, blinded study was conducted. Sixty endodontically treated teeth were randomized into two groups according to post type. A second randomization was performed for each type of removal technique (ultrasound, drill, or combined; n=10). One-way ANOVA was used to compare the time to post removal, paired t-test compared the amount of tooth structure removed and Kruskal Wallis followed by post hoc Mann-Whitney test were used for cost analysis (P=0.05). Results: There was no difference in post removal time considering post type or technique (P=0.630). The average loss of tooth structure in the cervical region was greater than 30% when only a diamond bur was used to remove fiber glass post (P<0.00001) and cast metal post (P=0.008). Conclusion: According to the results of this study, we can conclude that the selection of the removal technique will depend on the skill of the operator, and some loss of tooth structure will always occur, although greater loss is expected when only diamond burs are used for this purpose.(AU)

Assuntos

RESUMO

INTRODUCTION: Plasmablastic lymphoma (PBL) is a rare form of B-cell lymphoma typically seen in patients with underlying immunosuppression such as HIV, autoimmune disease, and organ transplantation. PBL in HIV-positive patients usually originates from the gastrointestinal tract, with a predilection for the oral cavity. Bladder involvement by PBL is exceedingly rare, and cast nephropathy due to κ light chain-secreting PBL has not been reported previously. CASE REPORT: We report a patient who presented with acute kidney injury (AKI) in the setting of HIV, and was found to have a bladder tumor. Bladder pathology revealed a high-grade PBL with κ light chain restriction. Renal biopsy showed κ light chain cast nephropathy, presumably secondary to κ light chain-secreting PBL. CONCLUSION: Although the prognosis of PBL is poor, our patient recovered from AKI, achieved complete hematologic remission with chemotherapy, and underwent successful autologous stem cell transplant.

RESUMO

Calpain-mediated proteolysis has been proposed to modulate the pathogenesis of spinocerebellar ataxia type 3, also known as Machado-Joseph disease (SCA3/MJD), a disorder due to a CAG repeat expansion (CAGexp) at ATXN3. We aimed to investigate if single-nucleotide polymorphisms (SNPs) at calpain gene CAPN2 and at calpastatin gene CAST modulate the age at onset (AO) and disease progression in SCA3/MJD. A total of 287 SCA3/MJD symptomatic subjects (151 families) were included. AO was analyzed and controlled by the CAG repeat length of expanded allele and family. Candidate polymorphisms were chosen based on the literature and on a priori criteria. The CAG repeat length and SNPs were genotyped according to standard methods. AO of carriers of AA and AG + GGrs1559085 genotypes in CAST and with the median value of 75 repeats at the expanded allele were 34.23 (33.07-35.38) and 36.42 years (34.50-38.34), respectively (p = 0.049, mixed model treating the expanded CAG repeat size as fixed effect and family as random effect). Carriers of haplotype Crs27852/Grs1559085 had mean AO of 37.23 (12.76) and 33.42 years (12.20) (p = 0.047, Student's t test). Our data suggest an association between allele Grs1559085 and haplotype Crs27852/Grs1559085 at CAST and variations in the AO of SCA3/MJD subjects, independent from the effects of the CAGexp and family. The present results support the potential role of calpain cleavage pathway over modulation of SCA3/MJD phenotype.

Assuntos

RESUMO

Soil-transmitted helminthiasis (STH) is among the most common of parasitic infections, affecting vulnerable populations in tropical/subtropical areas globally. In endemic countries, children, a high-risk population, require treatment and preventive interventions. Mebendazole, a WHO-recommended medicine, originally formulated as a tablet that was often crushed for administration to young children unable to swallow it, was reformulated as a chewable tablet. Acceptability is a key aspect for treatment effectiveness in pediatrics. Herein, we used a validated data-driven approach to investigate the acceptability of the 500-mg mebendazole chewable tablet in children aged 2 to 4 years in Peru. Observer-reported outcomes were collected for 182 medicine intakes. Acceptability was scored using the acceptability reference framework: a three-dimensional map juxtaposing "positively accepted" and "negatively accepted" profiles. Results found that the 500-mg mebendazole chewable tablet was classified as "positively accepted" in children aged 2 to 4 years. Acceptability increased with age and some acceptability issue remain for the younger children. Nevertheless, this formulation was considerably better accepted than the conventional tablets regardless of treatment in young children. This chewable formulation appears to be an appropriate alternative to the hard tablet of mebendazole for treatment of STH and preventive interventions in children aged 2 to 4 years.

RESUMO

Objective: This study aimed to introduce a spirit level device for mounting maxillary casts to compare the reproducibility between the facebow and this new technique.Methods: The maxillary casts of 10 participants were mounted in three different situations: 1) with the facebow; 2) with the spirit level device, the participant in seated position; and 3) with the spirit level device with participant in standing position. Each procedure was performed by three different evaluators. The values obtained were calculated using the Technical Error of Measurement (TEM) and the inter-evaluator Coefficient of Variation (CV).Results: The mean values obtained were 4.3 mm, 2.2 mm, and 2.6 mm for absolute TEM; 8.7%, 5.4%, and 6.4% for relative TEM; and 7.3%, 4.5%, and 5.6% for CV.Conclusion: These results show that the facebow is less reproducible compared to the new device, demonstrating that the new technique can be satisfactorily used in clinical practice.

Assuntos

RESUMO

Objective: To compare the reproduction trueness and precision of dental casts made by the conventional, milling and 3D printing techniques. Material and Methods: From an upper right side half-arch reference model (RM), 72 models were obtained and divided into three groups: conventional (CM), milled (MM) and printed (PM). All models were scanned and converted into standard tessellation language (.STL) files. The files were superimposed using 3D analysis software, and statistical analysis was performed using the root mean square (RMS) values obtained. The Shapiro-Wilk test was used to assess normality, and the Kruskal-Wallis test was used to compare groups (ρ < ⍺; ⍺ = 0.05). The Mann-Whitney U test was used for multiple comparisons among groups (ρ < ਕ; ਕ = 0.017). Results: There were significant differences in trueness (ρ = 0.000; ρ <0.001) and precision (ρ = 0.000; ρ < 0.001) among the three dental cast groups. Regarding trueness, CM presented better results, followed by MM and PM. Regarding precision, MM showed better results, followed by PM and CM, which did not show significant differences. Conclusions: For dental cast reproduction the conventional technique has the best trueness and the milling technique has the best precision.(AU)

Objetivo: Comparar a fidelidade e precisão de reprodução de modelos de trabalho pelas técnicas convencional, de fresagem e de impressão 3D. Material e Métodos: A partir de um modelo de referência (MR) de uma hemi-arcada superior direita, foram obtidos 72 modelos divididos em três grupos: convencionais (MC), fresados (MF) e impressos (MI). Todos foram digitalizados e convertidos sob a forma de ficheiros .STL (standard tesselation language). Os ficheiros foram sobrepostos utilizando um software de análise 3D, e através dos valores RMS (raiz do valor quadrático médio) obtidos foi realizada a análise estatística. Para avaliação da normalidade foi utilizado o teste Shapiro Wilk e para a comparação entre grupos foi utilizado o teste Kruskal-Wallis (ρ < ⍺; ⍺ = 0.05). Para as comparações múltiplas entre grupos, foi utilizado o teste U de Mann-Whitney (ρ < ਕ; ਕ = 0.017). Resultados:Existem diferenças significativas de fidelidade (ρ = 0.000; ρ <0.001) e precisão (ρ = 0.000; ρ < 0.001) entre os três grupos. Em relação à fidelidade, MC apresentou melhores resultados, seguido por MF e MI. Em relação à precisão, MF apresentou melhores resultados, seguido por MI e MC, que não apresentaram diferenças significativas entre si. Conclusão: Para reprodução de modelos de trabalho, a técnica convencional é a que apresenta maior fidelidade e a técnica de fresagem a que apresenta maior precisão.(AU)

Assuntos

RESUMO

Lack of mechanical load leads to skeletal muscle atrophy, and one major underlying mechanism involves the myostatin pathway that negatively regulates protein synthesis and also activates Atrogin-1/MAFbx and MuRF1 genes. In hindlimb immobilization, leucine was observed to attenuate the upregulation of the referred atrogenes, thereby shortening the impact on fiber cross-sectional area, nonetheless, the possible connection with myostatin is still elusive. This study sought to verify the impact of leucine supplementation on myostatin expression. Male Wistar rats were supplemented with leucine and hindlimb immobilized for 3 and 7 days, after which soleus muscles were removed for morphometric measurements and analyzed for gene and protein expression by real-time PCR and Western blotting, respectively. Muscle wasting was prominent 7 days after immobilization, as expected, leucine feeding mitigated this effect. Atrogin-1/MAFbx gene expression was upregulated only after 3 days of immobilization, and this effect was attenuated by leucine supplementation. Atrogin-1/MAFbx protein levels were elevated after 7 days of immobilization, which leucine supplementation was not able to lessen. On the other hand, myostatin gene expression was upregulated in immobilization for 3 and 7 days, which returned to normal levels after leucine supplementation. Myostatin protein levels followed gene expression at a 3-day time point only. Follistatin gene expression was upregulated during immobilization and accentuated by leucine after 3 days of supplementation. Concerning protein expression, follistatin was not altered neither by immobilization nor in immobilized animals treated with leucine. In conclusion, leucine protects against skeletal muscle mass loss during disuse, and the underlying molecular mechanisms appear to involve myostatin inhibition and Atrogin-1 normalization independently of follistatin signaling.