RESUMO

Microalgae have emerged as a promising source of biomass to produce renewable biofuels due to their ability to synthesize high-energy density compounds of commercial interest. This study proposes an approach for pilot-scale oil extraction, purification by fractional distillation, hydrocarbon characterization by gas chromatography coupled to mass spectrometry (GC-MS), evaluation of physicochemical parameters of the produced hydrocarbons, preliminary cost analysis, and challenges and future opportunities for green diesel on a commercial scale. Here, the microalgae Tetradesmus obliquus was cultivated in 12 m³ photobioreactors using biodigested swine waste as a culture medium. The resulting biomass was subjected to drying and harvesting, followed by oil extraction using a hot solvent extraction method, followed by distillation to purify the compounds. Three different extraction and distillation experiments were conducted, each using different solvent combinations. The results obtained revealed that extraction with a solvent blend, composed of hexane and ethanol, provided more significant yields compared to extraction with pure hexane. GC-MS analysis showed the presence of alkanes and alkenes in the oil samples, and the proportion of solvent used in the extraction directly influenced the production of alkanes. Additionally, specific hydrocarbons such as 4-methyl-1-decene, 8-heptadecene, 1-pentadecene, 9-heneicosene, and 2-dodecene were identified. The evaluation of the physicochemical parameters demonstrated that the calorific value of the distilled oil samples is within the range of typical values for petroleum diesel. However, it was observed that the distilled oil samples had higher sulfur content compared to conventional diesel. Regarding the cost analysis, it was found that it varies depending on the experimental conditions. In particular, the process using a solvent mixture of 70% hexane and 30% ethanol proved to be more economical than the others, since it extracted a greater quantity of oil with a lower initial biomass requirement. In summary, this microalgae-derived hydrocarbon production process is promising and offers insights for compound purification and future biofuel applications.

Assuntos

RESUMO

Low-density green polyethylene (LDGPE) composites reinforced with 5 wt% of bamboo fiber and 3 wt% of a compatibilizing agent (polyethylene grafted with maleic anhydride and tannin) were processed through extrusion and injection molding. Bamboo fiber, Bambusa Vulgaris, was characterized using Fourier-transform infrared spectroscopy (FTIR). The molded specimens were analyzed for their thermal, mechanical, and morphological properties. The estimated concentration was chosen to provide the best mechanical strength to the material studied. FTIR analysis of the fibers revealed the presence of groups characteristic of bamboo fiber and tannin. Differential scanning calorimetry revealed that both compatibilizing agents increased the matrix's degree of crystallinity. However, scanning electron microscopy (SEM) showed that, despite the presence of compatibilizing agents, there was no significant improvement in adhesion between the bamboo fibers and LDGPE.

RESUMO

Agro-industrial residue valorization under the umbrella of the circular bioeconomy (CBE) has prompted the search for further forward-thinking alternatives that encourage the mitigation of the industry's environmental footprint. From this perspective, second-life valorization (viz., thermoplastic composites) has been explored for agro-industrial waste (viz., oil palm empty fruit bunch fibers, OPEFBFs) that has already been used previously in other circular applications (viz., the removal of domestic wastewater contaminants). Particularly, this ongoing study evaluated the performance of raw residues (R-OPEFBFs) within three different size ranges (250-425, 425-600, 600-800 µm) both before and after their utilization in biofiltration processes (as post-adsorbents, P-OPEFBFs) to reinforce a polymer matrix of acrylic resin. The research examined the changes in R-OPEFBF composition and morphology caused by microorganisms in the biofilters and their impact on the mechanical properties of the composites. Smaller R-OPEFBFs (250-425 µm) demonstrated superior mechanical performance. Additionally, the composites with P-OPEFBFs displayed significant enhancements in their mechanical properties (3.9-40.3%) compared to those with R-OPEFBFs. The combination of the three fiber sizes improved the mechanical behavior of the composites, indicating the potential for both R-OPEFBFs and P-OPEFBFs as reinforcement materials in composite applications.

RESUMO

Chitinases are promising enzymes for a multitude of applications, including chitooligosaccharide (COS) synthesis for food and pharmaceutical uses and marine waste management. Owing to fungal diversity, fungal chitinases may offer alternatives for chitin degradation and industrial applications. The rapid reproduction cycle, inexpensive growth media, and ease of handling of fungi may also contribute to reducing enzyme production costs. Thus, this study aimed to identify fungal species with chitinolytic potential and optimize chitinase production by submerged culture and enzyme characterization using shrimp chitin. Three fungal species, Coriolopsis byrsina, Trichoderma reesei, and Trichoderma harzianum, were selected for chitinase production. The highest endochitinase production was achieved in C. byrsina after 168 h cultivation (0.3 U mL- 1). The optimal temperature for enzyme activity was similar for the three fungal species (up to 45 and 55 ºC for endochitinases and exochitinases, respectively). The effect of pH on activity indicated maximum hydrolysis in acidic pH (4-7). In addition, the crude T. reesei extract showed promising properties for removing Candida albicans biofilms. This study showed the possibility of using shrimp chitin to induce chitinase production and enzymes that can be applied in different industrial sectors.

Assuntos

RESUMO

BACKGROUND: Theobroma grandiflorum (Malvaceae), known as cupuassu, is a tree indigenous to the Amazon basin, valued for its large fruits and seed pulp, contributing notably to the Amazonian bioeconomy. The seed pulp is utilized in desserts and beverages, and its seed butter is used in cosmetics. Here, we present the sequenced telomere-to-telomere genome of cupuassu, disclosing its genomic structure, evolutionary features, and phylogenetic relationships within the Malvaceae family. FINDINGS: The cupuassu genome spans 423 Mb, encodes 31,381 genes distributed in 10 chromosomes, and exhibits approximately 65% gene synteny with the Theobroma cacao genome, reflecting a conserved evolutionary history, albeit punctuated with unique genomic variations. The main changes are pronounced by bursts of long-terminal repeat retrotransposons at postspecies divergence, retrocopied and singleton genes, and gene families displaying distinctive patterns of expansion and contraction. Furthermore, positively selected genes are evident, particularly among retained and dispersed tandem and proximal duplicated genes associated with general fruit and seed traits and defense mechanisms, supporting the hypothesis of potential episodes of subfunctionalization and neofunctionalization following duplication, as well as impact from distinct domestication process. These genomic variations may underpin the differences observed in fruit and seed morphology, ripening, and disease resistance between cupuassu and the other Malvaceae species. CONCLUSIONS: The cupuassu genome offers a foundational resource for both breeding improvement and conservation biology, yielding insights into the evolution and diversity within the genus Theobroma.

Assuntos

RESUMO

Phycocyanin is a highly valued pigment present in Spirulina platensis biomass with applications in the food industry in terms of biorefinery concepts; specifically, its antioxidant and antimicrobial capacity are an advantage that could be incorporated into a food matrix. This study aims to use rice husk as an alternative culture medium for S. platensis biomass growth and phycocyanin extraction by ohmic heating processing using a 3D-printed reactor. S. platensis was cultivated in rice husk extract (RHE) from 0-100% (v/v). The highest content of microalgal biomass was 1.75 ± 0.01 g/L, with a specific growth rate of 0.125 ± 0.01 h-1. For the phycocyanin extraction under an ohmic heating process, a 3D-printed reactor was designed and built. To optimize phycocyanin extraction, a central composite rotatable design (CCDR) was evaluated, with three factors: time (min), temperature (°C), and pH. The highest phycocyanin content was 75.80 ± 0.98 mg/g in S. platensis biomass grown with rice husk extract. Ohmic heating is a promising method for rapid phycocyanin extraction, and rice husk as a culture medium is an alternative for the growth of S. platensis biomass in the integration of second- and third-generation biorefineries.

RESUMO

In this research, we developed a biochar-based fertilizer using biogas slurry and biochar derived from lignocellulosic agro-residues. Biogas slurry was obtained through the anaerobic digestion of the organic fraction of municipal solid waste (fresh vegetable biomass and/or prepared food), while biochars were derived from residues from quinoa, maize, rice, and sugarcane. The biochar-based fertilizers were prepared using an impregnation process, where the biogas slurry was mixed with each of the raw biochars. Subsequently, we characterized the N, P and K concentrations of the obtained biochar-based fertilizers. Additionally, we analyzed their surface properties using SEM/EDS and FTIR and conducted a slow-release test on these biochar-based fertilizers to assess their capability to gradually release nutrients. Lastly, a bioassay using cucumber plants was conducted to determine the N, P, and K bioavailability. Our findings revealed a significant correlation (r > 0.67) between the atomic O/C ratio, H/C ratio, cation exchange capacity, surface area, and the base cations concentration with N, P, and/or K adsorption on biochar. These properties, in turn, were linked to the capability of the biochar-based fertilizer to release nutrients in a controlled manner. The biochar-based fertilizer derived from corn residues showed <15 % release of N, P and K at 24 h. Utilization of these biochar-based fertilizers had a positive impact on the mineral nutrition of cucumber plants, resulting in an average increase of 61 % in N, 32 % in P, and 19 % in K concentrations. Our results underscore the potential of biochar-based fertilizers in controlled nutrient release and enhanced plant nutrition. Integration of biochar and biogas slurry offers a promising and sustainable approach for NPK recovery and fertilizer production in agriculture. This study presents an innovative and sustainable approach combining the use of biochar for NPK recovery from biogas slurry and its use as a biochar-based fertilizer in agriculture.

Assuntos

RESUMO

Interest in bacterial nanocellulose (BNC) has grown due to its purity, mechanical properties, and biological compatibility. To address the need for alternative carbon sources in the industrial production of BNC, this study focuses on banana leaves, discarded during harvesting, as a valuable source. Banana midrib juice, rich in nutrients and reducing sugars, is identified as a potential carbon source. An optimal culture medium was designed using a simplex-centroid mixing design and evaluated in a 10 L bioreactor. Techniques such as Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were used to characterize the structural, thermal, and morphological properties of BNC. Banana midrib juice exhibited specific properties, such as pH (5.64), reducing sugars (15.97 g/L), Trolox (45.07 µM), °Brix (4.00), and antioxidant activity (71% DPPH). The model achieved a 99.97% R-adjusted yield of 6.82 g BNC/L. Physicochemical analyses revealed distinctive attributes associated with BNC. This approach optimizes BNC production and emphasizes the banana midrib as a circular solution for BNC production, promoting sustainability in banana farming and contributing to the sustainable development goals.

RESUMO

Resumen Introducción: La industria acuícola está en constante crecimiento, registrando una producción mundial de casi 88 millones de toneladas para el año 2020. Esta industria trae consigo problemas ambientales si sus efluentes no son debidamente tratados. En el 2020, se constituyó la primera empresa de base tecnológica del CONICET en la Patagonia Argentina cuyo propósito es la producción acuícola del erizo verde de mar, Arbacia dufresnii con la finalidad de elaborar una gama de productos nutracéuticos. Su sistema de cultivo conlleva un compromiso de sustentabilidad desde su creación, y sin embargo genera efluentes con niveles altos de nitratos y fosfatos. Objetivo: Ante este escenario, y valorizando la biorremediación como herramienta de tratamiento de aguas, se propone en este trabajo la utilización de las microalgas marinas como agentes fitorremediadores del efluente acuícola. Métodos: Se utilizaron las microalgas Chaetoceros gracilis, Navicula sp., Tetraselmis suecica., Rhodomona salina., Nanochloropsis galvana y Cylindrotheca closterium, las cuales son usadas como alimento de las larvas del erizo en el proceso productivo. Se diseñó un experimento que compara el crecimiento microalgal y la capacidad de remoción de los nutrientes en el efluente en contraste con el medio de cultivo artificial actualmente usado en el ciclo productivo. Resultados: Es posible remediar el efluente de la industria acuícola mediante las microalgas seleccionadas, con porcentaje de eficacia de remoción del 100 % del nitrato y un porcentaje de eficacia de remoción promedio de 50 % para todas las microalgas testeadas. Asimismo, se obtuvieron valores de biomasa microalgal significativamente mayores cuando el cultivo fue realizado en el efluente respecto del cultivo en el medio artificial. Conclusiones: Los avances en investigación proporcionados en este trabajo ponen de manifiesto que es posible el aprovechamiento de un descarte para cultivar las microalgas, incluso mejorando la productividad microalgal para su uso como alimento, disminuyendo los costos involucrados en el sector de producción microalgal cambiando el uso del tipo de medio de cultivo actual (F/2) por el proveniente de un descarte. Estos avances si son escalados y validados, pueden mejorar los estándares de sustentabilidad de la industria en el marco de una economía circular.

Abstract Introduction: The aquaculture industry is constantly growing, registering a global production of almost 88 million tonnes by 2020. This industry brings environmental problems if its effluents are not properly treated. In 2020, the first technology-based company of CONICET was established in Argentine Patagonia whose purpose is the aquaculture production of the green sea urchin, Arbacia dufresnii to develop a range of nutraceutical products. Its cultivation system entails a commitment to sustainability since its creation, and yet it generates effluents with high levels of nitrates and phosphates. Objective: Given this scenario, and valuing bioremediation as a water treatment tool, the use of marine microalgae as phytoremediating agents of aquaculture effluent is proposed in this work. Methods: The microalgae Chaetoceros gracilis, Navicula sp., Tetraselmis suecica, Rhodomona salina, Nanochloropsis galvana and Cylindrotheca closterium were use; which are used as food for sea urchins larvae in the production process. An experiment was designed that compares the microalgal growth and the removal capacity of nutrients in the effluent in contrast to the artificial culture medium currently used in the production cycle. Results: It is possible to remedy the aquaculture industry's effluent by employing the selected microalgae, with a percentage of removal efficiency of 100 % of the nitrate and an average removal efficiency percentage of 50 % for all the microalgae tested. Likewise, significantly higher microalgal biomass values were obtained when the culture was carried out in the effluent the culture in the artificial environment. Conclusions: The advances in research provided in this work show that it is possible to take advantage of a discard to cultivate microalgae, even improving microalgal productivity for use as food, reducing the costs involved in the microalgal production sector by changing the use of the type of current culture medium (F/2) for that from a current discard. These advances, if scaled and validated, can improve industry sustainability standards within the framework of a circular economy.

Assuntos

RESUMO

An increasing number of countries and regions consider the bioeconomy transition a strategic policy priority. When approached through the lens of a circular economy perspective, investments in bioeconomy have the potential to enhance resource utilisation efficiency, preserve biodiversity and ecosystems, and foster sustainable development with low emissions. At the same time, if requirements and contextual factors of bioeconomy strategies are not formally analysed, bioeconomic investments might lead to unintended negative consequences. This paper proposes a decision support procedure to design, assess, prioritise, and monitor bioeconomy investments and policies. The flexibility and scalability of our decision support procedure is tested in Colombia to foster a regional and local transition to bioeconomy initiatives that consider the local capital assets and the stakeholders' views. The heterogeneous character of the Colombian environment, economy, society and culture represents an ideal condition to test the strength of the decision support procedure to promote bioeconomy in low and middle-income countries. Our empirical results highlight the benefit of adopting a formal assessment framework that includes strategic national indicators, regional features and stakeholders' views. In terms of the Colombian regional bioeconomy ambitions, we highlight the need for expanding knowledge hubs and participatory stakeholder networks and buttressing appropriate financial mechanisms.

Assuntos

RESUMO

The synthesis of silver nanoparticles (AgNPs) is usually based on expensive methods that use or generate chemicals that can negatively impact the environment. Our study presents a simple one-step synthesis process for obtaining AgNP using an aqueous extract of Amazonian fruit açai (Euterpe oleracea Mart.) as the reducing and stabilizing agents. The bio-synthesized AgNP (bio-AgNP) were comprehensively characterized by diverse techniques, and as a result, 20-nm spherical particles (transmission electron microscopy) were obtained. X-ray diffraction analysis (XRD) confirmed the presence of crystalline AgNP, and Fourier-transform infrared spectroscopy (FT-IR) suggested that polyphenolic compounds of açaí were present on the surface. The bio-AgNP showed antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Acinetobacter baumannii. In Caenorhabditis elegans exposed to 10 µg/L bio-AgNP for 96 h, there were no significant effects on growth, reproduction, or reactive oxygen species (ROS) concentration; however, there was an increase in superoxide dismutase (SOD) and glutathione-S-transferase (GST) enzymatic activity. In contrast, when worms were exposed to chemically synthesized AgNP (PVP-AgNP), an increase in ROS, SOD, and GST activity and a reduction in oxidative stress resistance were observed. In conclusion, our study not only showcased the potential of açaí in the simple and rapid production of AgNP but also highlighted the broad-spectrum antimicrobial activity of the synthesized nanoparticles using our protocol. Moreover, our findings revealed that these AgNPs exhibited reduced toxicity to C. elegans at environmentally realistic concentrations compared with PVP-AgNP.

Assuntos

RESUMO

Trace elements pollution of soils became a global concern because of their persistence in the environment which can lead to accumulation in food chains up to toxic levels. At the same time, there is a shortage of arable land for growing food, fodder and industrial crops, which highlights the need for remediation/use of polluted land. Restoration of degraded lands has been included as a vital component of UN Sustainable Development Goals (SDGs). We summarize various sources of entry of important trace elements in the environment, available biological reclamation and management strategies and their limitations. Recent advances in phytomanagement approaches using aromatic crops to obtain economically valuable products such as essential oils and revalorize such polluted areas are reviewed. The worldwide application of this strategy in the last 10 years is illustrated through a choropleth map. Finally, the emerging concept of phytomanagement as a restorative and regenerative circular bio-economy is also discussed.

Phytomanagement studies have remarkably increased during the last 4 years. However, there were limited studies on field application of this strategy. France is the leading country in phytomanaged polluted fields using aromatic plants. Applying aromatic plants based degraded land management models are a sustainable approach toward circular economy and to achieve the objectives of sustainable development goals (SDGs).

Assuntos

RESUMO

Biosurfactants are eco-friendly compounds with unique properties and promising potential as sustainable alternatives to chemical surfactants. The current review explores the multifaceted nature of biosurfactant production and applications, highlighting key fermentative parameters and microorganisms able to convert carbon-containing sources into biosurfactants. A spotlight is given on biosurfactants' obstacles in the global market, focusing on production costs and the challenges of large-scale synthesis. Innovative approaches to valorizing agro-industrial waste were discussed, documenting the utilization of lignocellulosic waste, food waste, oily waste, and agro-industrial wastewater in the segment. This strategy strongly contributes to large-scale, cost-effective, and environmentally friendly biosurfactant production, while the recent advances in waste valorization pave the way for a sustainable society.

Assuntos

RESUMO

The need for a sustainable and circular bioeconomy model is imperative due to petroleum non-renewability, scarcity and environmental impacts. Biorefineries systems explore biomass to its maximum, being an important pillar for the development of circular bioeconomy. Polyhydroxyalkanoates (PHAs) can take advantage of biorefineries, as they can be produced using renewable feedstocks, and are potential substitutes for petrochemical plastics. The present work aims to evaluate the current status of the industrial development of PHAs production in biorefineries and PHAs contributions to the bioeconomy, along with future development points. Advancements are noticed when PHA production is coupled in wastewater treatment systems, when residues are used as substrate, and also when analytical methodologies are applied to evaluate the production process, such as the Life Cycle and Techno-Economic Analysis. For the commercial success of PHAs, it is established the need for dedicated investment and policies, in addition to proper collaboration of different society actors.

Assuntos

RESUMO

Microalgae, highly prized for their protein, lipid, carbohydrate, phycocyanin, and carotenoid-rich biomass, have garnered significant industrial attention in the context of third-generation (3G) biorefineries, seeking sustainable alternatives to non-renewable resources. Two primarily cultivation methods, open ponds and closed photobioreactors systems, have emerged. Open ponds, favored for their cost-effectiveness in large-scale industrial production, although lacking precise environmental control, contrast with closed photobioreactors, offering controlled conditions and enhanced biomass production at the laboratory scale. However, their high operational costs challenge large-scale deployment. This review comprehensively examines the strength, weakness, and typical designs of both outdoor and indoor microalgae cultivation systems, with an emphasis on their application in terms of biorefinery concept. Additionally, it incorporates techno-economic analyses, providing insights into the financial aspects of microalgae biomass production. These multifaceted insights, encompassing both technological and economic dimensions, are important as the global interest in harnessing microalgae's valuable resources continue to grow.

Assuntos

RESUMO

Circular Economy (CE) plays a crucial role in Latin America, where the transition to new economic development models poses significant challenges. This study conducts a bibliometric analysis of CE research in the region to identify critical areas of development, influential authors, organizations, and future research trends. This analysis aims to highlight the progress made in the CE field in Latin America and identify areas for improvement to promote sustainable development. Using the Scopus database, we analyzed 632 research papers, and the rising number of CE publications in Latin America suggests a continuous growth trajectory, expected to reach over 2500 studies by 2026. The analysis reveals that Brazil leads CE research with 274 publications, Waste Management being the most studied topic. The study highlights the region's growing trend towards implementing innovative and sustainable solutions for waste management and resource utilization, such as bioengineering and biochemistry processes, which could positively impact the region's economy and environment. The findings of this study provide valuable insights for policymakers and researchers aiming to promote sustainable development in Latin America.

RESUMO

Açai seeds have been discarded improperly around the Amazonia region, but they can be seen as promising low-cost substrates for fermentation processes. The structural carbohydrates and physicochemical characterization of açai seeds from the Amazonia were assessed followed by the determination of the optimal hydrolysis conditions using H3PO4 (phosphoric acid) and H2SO4 (sulfuric acid) to obtain a liquor with high contents of simple carbohydrates and low levels of potential microbial inhibitors usually generated during acid hydrolysis of carbohydrates. A central composite rotational design was carried out varying the concentrations of diluted acid (0-5%, w/v), solids (0.1-25%, w/v), and hydrolysis time (9.5-110 min). Acid hydrolysis with H2SO4 was more effective in producing reducing sugars (15.9-103.1 g/L) than H3PO4 (2.9-33.9 g/L) during optimization. The optimal hydrolysis conditions with H2SO4 were 3.5% of acid (w/v), 25% of solids during 70 min at 121 °C, which provided a liquor with 55 g/L of reducing sugars and low levels of microbial inhibitors: acetic acid (1.8 g/L), hydroxymethyl furfural (338 mg/L), and furfural (10 mg/L). Thus, açai seeds were characterized as promising agroindustrial waste with high potential to be used as a low-cost substrate in biotechnological processes, comprising relevant environmental and bioeconomic aspects for the development of the Amazonia.

Assuntos

RESUMO

This study develops a set of measures to address the interrelationship among circular waste-based bioeconomy (CWBE) attributes, including those of government strategy, digital collaboration, supply chain integration, smart operations, and a green supply chain, to build a circular bioeconomy that feeds fish waste back into the economy. CWBE development is a potential solution to the problem of waste reuse in the fish supply chain; however, this potential remains untapped, and prior studies have failed to provide the criteria to guide its practices. Such an analytical framework requires qualitative assessment, which is subject to uncertainty due to the linguistic preferences of decision makers. Hence, this study adopts the fuzzy Delphi method to obtain a valid set of attributes. A fuzzy decision-making trial and evaluation was applied to address the attribute relationships and determine the driving criteria of CWBE development. The results showed that government strategies play a causal role in CWBE development and drive digital collaboration, smart operations, and supply chain integration. The findings also indicated that smart manufacturing technology, organizational policies, market enhancement, supply chain analytics, and operational innovation are drivers of waste integration from fisheries into the circular economy through waste-based bioeconomy processes.

Assuntos

RESUMO

The meat industry generates a large amount of waste that can be used to create useful products such as bio-implants, which are usually expensive. In this report, we present an economic analysis of a continuous process for large-scale chemically cross-linked collagen scaffold (CCLCS) production in a Mexican context. For this purpose, three production capacities were simulated using SuperPro Designer® v 12.0: 5, 15, and 25 × 103 bovine pericardium units (BPU) per month as process feedstock. Data indicated that these capacities produced 2.5, 7.5, and 12.5 kg of biomesh per batch (per day), respectively. In addition, Net Unit Production Costs (NUPC) of 784.57, 458.94, and 388.26 $USD.kg-1 were obtained, correspondingly, with selling prices of 0.16 ± 0.078 USD.cm-2, 0.086 ± 0.043 USD.cm-2, and 0.069 ± 0.035 USD.cm-2, in the same order. We found that these selling prices were significantly lower than those in the current market in Mexico. Finally, distribution of costs associated with the process followed the order: raw materials > facility-dependent > labor > royalties > quality analysis/quality control (QA/QC) > utilities. The present study showed the feasibility of producing low-cost and highly profitable CCLCS with a relatively small investment. As a result, the circular bioeconomy may be stimulated.