RESUMO

Nanopore-containing two-dimensional materials have been explored for a wide range of applications including filtration, sensing, catalysis, energy storage and conversion. Triangulenes have recently been experimentally synthesized in a variety of sizes. In this regard, using these systems as building blocks, we theoretically examined 3-triangulene kagome crystals with inherent holes of ∼12 Å diameter and a greater density array of nanopores (≥1013 cm-2) compared to conventional 2D systems. The energetic, electronic, and transport properties of pristine and B/N-doped 3-triangulene kagome crystals were evaluated through a combination of density functional theory and non-equilibrium Green's function method. The simulated scanning tunneling microscopy images clearly capture electronic perturbation around the doped sites, which can be used to distinguish the pristine system from the doped systems. The viability of precisely controlling the band structure and transport properties by changing the type and concentration of doping atoms is demonstrated. The findings presented herein can potentially widen the applicability of these systems that combine unique electronic properties and intrinsically high-density pores, which can pave the way for the next generation of nanopore-based devices.

RESUMO

The growth of Nelore cattle was analysed considering the following performance parameters; the effect of the calving order of cows on the phenotypic expression of birth weight (BW), average daily gain from birth to weaning (BWG), and weaning weight (WW), the estimated genetic parameters for the traits, including the covariance components between direct and maternal genetic effects. Genetic trends and correlated responses were also obtained for the studied traits. The calving order of cows, as well as other fixed effects used to obtain the adjusted phenotypic means, were statistically significant (p < 0.001) for studied traits. Direct heritability was estimated at 0.24 ± 0.01 (BW), 0.15 ± 0.01 (BWG), and 0.18 ± 0.01 (WW), while maternal heritability was 0.06 ± 0.01 (BW), 0.12 ± 0.01 (BWG), and 0.11 ± 0.01 (WW). The correlations between direct and maternal effects within the same trait were negligible. Moderate to higher direct genetic correlations (ranging from 0.54 ± 0.04 to 0.98 ± 0.01) and maternal genetic correlations (ranging from 0.34 ± 0.09 to 0.99 ± 0.002) were estimated between the studied traits. Unlike direct genetic effects, there was no significant change in maternal genetic effects over time (p > 0.05). These results indicated the need for revising selection indexes for enhancing maternal ability. Correlated responses were generally lower compared to direct responses, except for BWG. The selection for BWG, considering the maternal genetic effect, would be more efficient to improve maternal ability of the cows for pre-weaning growth in relation to selection for WW. Our results found that direct genetic merit improves pre-weaning weight and this trait can be incorporated into the breeding goal as reflected in the WW.

Assuntos

RESUMO

Defect engineering of two-dimensional (2D) materials offers an unprecedented route to increase their functionality and broaden their applicability. In light of the recent synthesis of the 2D Silicon Carbide (SiC), a deep understanding of the effect of defects on the physical and chemical properties of this new SiC allotrope becomes highly desirable. This study investigates 585 extended line defects (ELDs) in hexagonal SiC considering three types of interstitial atom pairs (SiSi-, SiC-, and CC-ELD) and using computational methods like Density Functional Theory, Born-Oppenheimer Molecular Dynamics, and Kinetic Monte-Carlo (KMC). Results show that the formation of all ELD systems is endothermic, with the CC-ELD structure showing the highest stability at 300 K. To further characterize the ELDs, simulated scanning tunneling microscopy (STM) is employed, and successfully allow identify and distinguish the three types of ELDs. Although pristine SiC has a direct band gap of 2.48 eV, the presence of ELDs introduces mid-gap states derived from the pz orbitals at the defect sites. Furthermore, our findings reveal that the ELD region displays enhanced reactivity towards hydrogen adsorption, which was confirmed by KMC simulations. Overall, this research provides valuable insights into the structural, electronic, and reactivity properties of ELDs in hexagonal SiC monolayers and paves the way for potential applications in areas such as catalysis, optoelectronics, and surface science.

RESUMO

Background: The aim of this study was to evaluate the nanoleakage and microtensile bond strength (µTBS) of an ethanol based-adhesive containing Titanium dioxide (TiO2) nanofibers to dentin. Material and Methods: TiO2 nanofiber was produced by electrospinning and it was inserted in an ethanol-based adhesive in 0.5, 1.5 and 2.5% by weight. The original adhesive did not receive nanofiber. The middle dentin was exposed by diamond saw under water-cooling and dentin was polished with wet 600-grit SiC abrasive paper. Resin composite build-ups were applied incrementally to the dentin after adhesive application. After storage in distilled water (24 hours/37°C) the teeth were sectioned perpendicularly to the bonded interface and sticks were obtained. Twenty-five sticks per group were tested by µTBS with a crosshead speed of 0.5mm/minute. The average values (MPa) obtained in each substrate were subjected to one-way ANOVA (α=0,05) with the tooth being considered the experimental unit. The nanoleakage pattern was observed in ten sticks per group and analyzed by Chi-square test (α=0,05). Results: There was no difference in µTBS among the experimental groups. However, there was a statistically significant difference among 2.5 % nanofiber adhesive, 0.5 % nanofibers and control groups, (p=0,028) in relation to nanoleakage. Conclusions: TiO2 nanofibers in 2.5% of weight inserted in dental adhesive reduced the nanoleakage, but did not improve the µTBS to dentin. Key words:Dentin-bonding agents, nanoleakage, tensile bond strength.

RESUMO

Alcohol use is a leading risk factor for substantial health loss, disability, and death. Thus, there is a general interest in developing computational tools to classify electroencephalographic (EEG) signals in alcoholism, but there are a limited number of studies on convolutional neural network (CNN) classification of alcoholism using topographic EEG signals. We produced an original dataset recorded from Brazilian subjects performing a language recognition task. Then, we transformed the Event-Related Potentials (ERPs) into topographic maps by using the ERP's statistical parameters across time, and used a CNN network to classify the topographic dataset. We tested the effect of the size of the dataset in the accuracy of the CNNs and proposed a data augmentation approach to increase the size of the topographic dataset to improve the accuracies. Our results encourage the use of CNNs to classify abnormal topographic EEG patterns associated with alcohol abuse.

Assuntos

RESUMO

Gastroretentive drug delivery systems (GRDDS) are modified-release dosage forms designed to prolong their residence time in the upper gastrointestinal tract, where some drugs are preferentially absorbed, and increase the drug bioavailability. This work aimed the development of a novel GRDDS containing 60 mg of sildenafil citrate, and the evaluation of the feasibility of the proposed formulation for use in the treatment of pulmonary arterial hypertension (PAH), for once a day administration, by using in silico pharmacokinetic (PK) modeling and simulations using GastroPlusTM. The Model-Informed Drug Development (MIDD) approach was used in formulation design and pharmacokinetic exposure prospecting. A 22 factorial design with a central point was used for optimization of the formulation, which was produced by direct compression and characterized by some tests, including buoyancy test, assay, impurities, and in vitro dissolution. A compartmental PK model was built using the GatroPlusTM software for virtual bioequivalence of the proposed formulations in comparison with the defined target release profile provided by an immediate release (IR) tablet formulation containing 20 mg of sildenafil administered three times a day (TID). The results of the factorial design showed a direct correlation between the dissolution rate and the amount of hydroxypropyl methyl cellulose (HPMC) in the formulations. By comparing the PK parameters predicted by the virtual bioequivalence, the formulations F1, F2, F3 and F5 failed on bioequivalence. The F4 showed bioequivalence to the reference and was considered the viable formulation to substitute the IR. Thus, GRDDS could be a promising alternative for controlling the release of drugs with a pH-dependent solubility and narrow absorption window, specifically in the gastric environment, and an interesting way to reduce dose frequency and increase the drug bioavailability. The MIDD approach increases the level of information about the pharmaceutical product and guide the drug development for more assertive ways.

Assuntos

RESUMO

This study evaluated the stability of a novel nutraceutical formulation composed of the probiotic Limosilactobacillus fermentum 296, quercetin (QUE), and resveratrol (RES) (LFQR) under different storage conditions. The effects of different relative humidities (RH; 11, 22, and 33%) and storage temperatures (refrigeration temperature -4 °C and room temperature -25 °C) on the stability of LFQR were evaluated through the determination of thermal stability, viable cell counts, bacterial physiological status, antioxidant capacity, and contents of QUE and RES during long-term storage. RH did not affect endothermic reactions and mass reduction in LFQR. After a 15-day-humidification period, L. fermentum 296 had higher viable cell counts in LFQR under refrigeration temperature storage when compared to room temperature storage regardless of the RH. The physiological status of L. fermentum 296 in LFQR was overall similar during 90 days of storage (11% RH) under refrigeration and room temperature. L. fermentum 296 had the highest viable cell counts (> 6 log CFU/g) in LFQR up to day 90 of refrigeration storage (11% RH). LFQR kept high contents of QUE and RES and maintained antioxidant capacity during 90 days of storage under refrigeration and room temperature. The results showed that the higher stability and functionality of LFQR during long-term storage should be guaranteed under 11% RH and refrigeration temperature.

RESUMO

A challenge in 2D materials engineering is to find a nanodevice that is capable of detecting and distinguishing gas molecules through an electrical signal. Herein, the B-doped carbon phosphide monolayer (B-doped γ-CP) was explored as a gas sensor through a combination of density functional theory (DFT) and the non-equilibrium Green's function (NEGF). Formation of the B-doped system is governed by an exothermic process, and the doping increases bands crossing at the Fermi level, contributing to an increment in the number of transmission channels compared with the undoped system. The interaction between the nanodevice and each gas molecule (CO, CO2, NO, and NH3) was explored. The electronic transmission is characteristically modulated by each target molecule, enabling each to be distinguished through the conductance change in the material. Our finds propose B-doped γ-CP as a promising candidate for use in highly sensitive and selective gas nanosensors.

RESUMO

Metformin is one of the most commonly used drugs in the world for the treatment of type 2 diabetes, while ferulic acid is a molecule that stands out for its antioxidant potential. Recent studies demonstrate hypoglycemic synergy between these molecules. The objective of this study is to develop and validate an analytical methodology by high-performance liquid chromatography for the simultaneous quantification of these drugs in pharmaceutical formulations. The method used an octadecylsilane column and a mobile phase composed of 6 mM sodium lauryl sulfate in 15 mM phosphate buffer:ACN (65:35). Ferulic acid and metformin were monitored at 232 nm, with a mobile phase flow rate of 1 ml/min and oven temperature at 40°C. The method was linear in the range of 5-25 µg/ml for both molecules. In the presence of degradation products, satisfactory selectivity was achieved. Accuracy values were close to 100% and standard deviations in precision were less than 2%. In the robustness evaluation, the proposed variations did not interfere with the quantification. Therefore, it is concluded that the present method can be safely applied to the quality control of ferulic acid and metformin raw materials, as well as when they are combined in pharmaceutical formulations.

Assuntos

RESUMO

Resistant Hypertension (RHT) is associated with a higher risk of Obstructive Sleep Apnoea (OSA). OSA and aortic stiffness (AS) measured by Pulse Wave Velocity (PWV) are independent risk factors for cardiovascular events. We assessed, in a cross-sectional study, the association between AS measured by PWV and OSA severity in patients with RHT. All patients were submitted to polysomnography, PWV measure and 24 h ABPM. Bivariate analysis compared patients with and without moderate/severe OSA. Multivariate analysis was performed to assess the independent correlates of moderate/severe OSA. A total of 376 patients were included, 31% were men with a mean age of 63 ± 10 years. Moderate/severe OSA was diagnosed in 214 patients (57%), 63 patients (17%) presented AS. Uncontrolled ABPM (true RHT) was found in 215 patients (57.2%) and among them 113 were diagnosed with moderate/severe OSA. Evaluating AS in patients with mild, moderate and severe apnoea, we observed a progressive increase in PWV (8.19 ± 1.55, 8.51 ± 1.84, 8.67 ± 1.68, respectively). Classifying them in 2 groups: (1) without apnoea/mild apnoea and (2) moderate/severe apnoea, we found higher values in group 2 (8.21 ± 1.52 m/s vs. 8.60 ± 1.75 m/s, p = 0.02), especially among true RHT patients (8.28 ± 1.62 vs. 8.81 ± 1.86, p = 0.029), women (8.13 ± 1.49 vs. 8.55 ± 1.73, p = 0.036), and uncontrolled nocturnal systolic BP (8.49 ± 1.63 vs. 8.58 ± 1.78, p = 0.04). In conclusion, in this RHT cohort, although with borderline results, the more severe the apnoea, the greater the arterial stiffness, mainly among women, true RHT and patients with an adverse nocturnal BP profile.

Assuntos

RESUMO

There is an ongoing need for scientific analysis to help governments and public health authorities make decisions regarding the COVID-19 pandemic. This article presents a methodology based on data mining that can offer support for coping with epidemic diseases. The methodological approach was applied in São Paulo, Rio de Janeiro and Manaus, the cities in Brazil with the most COVID-19 deaths until the first half of 2021. We aimed to predict the evolution of COVID-19 in metropolises and identify air quality and meteorological variables correlated with confirmed cases and deaths. The statistical analyses indicated the most important explanatory environmental variables, while the cluster analyses showed the potential best input variables for the forecasting models. The forecast models were built by two different algorithms and their results have been compared. The relationship between epidemiological and environmental variables was particular to each of the three cities studied. Low solar radiation periods predicted in Manaus can guide managers to likely increase deaths due to COVID-19. In São Paulo, an increase in the mortality rate can be indicated by drought periods. The developed models can predict new cases and deaths by COVID-19 in studied cities. Furthermore, the methodological approach can be applied in other cities and for other epidemic diseases.

Assuntos

RESUMO

OBJECTIVES: The aim of this study was to verify the match between 5 shades of composites from different manufacturers with a shade guide and among the systems using a portable spectrophotometer. MATERIALS AND METHODS: Shade measurements were performed on specimens of Z350 XT (3M ESPE), Charisma Diamond (Heraeus Kulzer GmbH), Esthet X-HD (Dentsply Caulk), and Empress Direct (Ivoclar-Vivadent) for shades A1, A2, A3, B1, and C3 using a Vita Easyshade spectrophotometer (Vita Zahnfabrik) against a white background. Corresponding shades of Vitapan Classical (Vita Zahnfabrik) guide were measured likewise and shade variation (ΔE) was calculated based on International Commission on Illumination L*a*b* parameters. The ΔE of the composites in each shade was compared by one-way analysis of variance and Tukey's post hoc test (α = 0.05). RESULTS: All composites presented ΔE > 3.7 compared with the shade guide. Variation in shades A3, B1, and C3 was significantly different for all composites. ΔE of Z350 XT was significantly lower for A1 than for the other shades, whereas ΔE of Z350 XT and Charisma Diamond were significantly lower for A2 than for the other shades. CONCLUSIONS: No composite shade matched with the shade guide. Equivalent shades of the restorative composite from different manufacturers may show clinically noticeable ΔE.

RESUMO

The electronic transport anisotropy for different C-doped borophene polymorphs (ß12andχ3) was investigated theoretically combining density functional theory and non-equilibrium Green's function. The energetic stability analysis reveals that B atoms replaced by C is more energetically favorable forχ3phase. We also verify a directional character of the electronic band structure on C-doped borophene for both phases. Simulated scanning tunneling microscopy and also total density of charge confirm the directional character of the bonds. The zero bias transmission forß12phase atE-EF= 0 shows that C-doping induces a local current confinement along the lines of doped sites. TheI-Vcurves show that C-doping leads to an anisotropy amplification in theß12than in theχ3. The possibility of confining the electronic current at an specific region of the C-doped systems, along with the different adsorption features of the doped sites, poses them as promising candidates to highly sensitive and selective gas sensors.

RESUMO

OBJECTIVE: To assess the nurse professional practice environment of neonatal units and its relationship with the levels and main sources of occupational stress. METHOD: Cross-sectional descriptive, exploratory, correlational study performed with nursing professionals of neonatal units of four public hospitals. A sociodemographic/professional questionnaire, the Brazilian version of Practice Environment Scale, and the Work Stress Scale were applied. In the analysis, mean, standard deviation, and Pearson chi-squared, Likelihood Ratio, and Mann Whitney U tests were adopted for association among variables. RESULTS: Participating professionals amounted to 269. The practice environment was evaluated as favorable by more than half of the sample (63.6%), showing a significant statistical association which was inversely proportional with occupational stress (p < 0.001). The insufficient number of professionals for quality care was the major source of stress for nursing technicians, whereas teamwork with doctors was the predominant factor for the evaluation of environment quality and high stress levels of nurses. CONCLUSION: Unfavorable practice environments increase the stress levels of nursing professionals in neonatal units and may compromise patient safety.

Assuntos

RESUMO

Covariance components were estimated for growth traits (BW, birth weight; WW, weaning weight; YW, yearling weight), visual scores (BQ, breed quality; CS, conformation; MS, muscling; NS, navel; PS, finishing precocity), hip height (HH), and carcass traits (BF, backfat thickness; LMA, longissimus muscle area) measured at yearling. Genetic gains were obtained and validation models on direct and maternal effects for BW and WW were fitted. Genetic correlations of growth traits with CS, PS, MS, and HH ranged from 0.20 ± 0.01 to 0.94 ± 0.01 and were positive and low with NS (0.11 ± 0.01 to 0.20 ± 0.01) and favorable with BQ (0.14 ± 0.02 to 0.37 ± 0.02). Null to moderate genetic correlations were obtained between growth and carcass traits. Genetic gains were positive and significant, except for BW. An increase of 0.76 and 0.72 kg is expected for BW and WW, respectively, per unit increase in estimated breeding value (EBV) for direct effect and an additional 0.74 and 1.43, respectively, kg per unit increase in EBV for the maternal effect. Monitoring genetic gains for HH and NS is relevant to maintain an adequate body size and a navel morphological correction, if necessary. Simultaneous selection for growth, morphological, and carcass traits in line with improve maternal performance is a feasible strategy to increase herd productivity.

Assuntos

RESUMO

In June 2019, a horse with neurological disorder was diagnosed with West Nile virus (WNV) in Boa Viagem, a municipality in the state of Ceará, northeast Brazil. A multi-institutional task force coordinated by the Brazilian Ministry of Health was deployed to the area for case investigation. A total of 513 biological samples from 78 humans, 157 domestic animals and 278 free-ranging wild birds, as well as 853 adult mosquitoes of 22 species were tested for WNV by highly specific serological and/or molecular tests. No active circulation of WNV was detected in vertebrates or mosquitoes by molecular methods. Previous exposure to WNV was confirmed by seroconversion in domestic birds and by the detection of specific neutralizing antibodies in 44% (11/25) of equids, 20.9% (14/67) of domestic birds, 4.7% (13/278) of free-ranging wild birds, 2.6% (2/78) of humans, and 1.5% (1/65) of small ruminants. Results indicate that not only equines but also humans and different species of domestic animals and wild birds were locally exposed to WNV. The detection of neutralizing antibodies for WNV in free-ranging individuals of abundant passerine species suggests that birds commonly found in the region may have been involved as amplifying hosts in local transmission cycles of WNV.

RESUMO

Spray-dried extracts are prepared as powders or granules after solvent removal, which can be obtained in the presence or absence of pharmaceutical adjuvants. This work aimed to optimize the process of obtaining dried extracts of Peperomia pellucida L. (HBK) by spray drying. The characterization of the extract was performed by thermal analysis, specific surface area, particle size and high performance liquid chromatography (HPLC); then, capsules were developed for antimicrobial treatment, evaluating four bench lots by the determination of the angle of repose and time of flow, scanning electron microscopy, porosity and physicochemical quality control. There were no significant differences between the extracts obtained by spray drying at atomization temperatures of 140 °C, 160 °C and 180 °C, which was confirmed by thermal analysis. Specific surface area varied inversely with the mean particle size. Regarding the marker content by HPLC, no significant differences were found between the samples, although the flavonoid fraction was more stable at 160 °C. Bench lots (I to IV) were developed using the diluents Flowlac®, Starch® 1500, microcrystalline cellulose 250 and Cellactose® 80. Based on the results, the bench lot I, containing Flowlac®, was selected. The results of physicochemical quality control demonstrated that the selected formulation meets the pre-established parameters, and proving to be economically viable.

Assuntos

RESUMO

ABSTRACT Objective: To assess the nurse professional practice environment of neonatal units and its relationship with the levels and main sources of occupational stress. Method: Cross-sectional descriptive, exploratory, correlational study performed with nursing professionals of neonatal units of four public hospitals. A sociodemographic/professional questionnaire, the Brazilian version of Practice Environment Scale, and the Work Stress Scale were applied. In the analysis, mean, standard deviation, and Pearson chi-squared, Likelihood Ratio, and Mann Whitney U tests were adopted for association among variables. Results: Participating professionals amounted to 269. The practice environment was evaluated as favorable by more than half of the sample (63.6%), showing a significant statistical association which was inversely proportional with occupational stress (p < 0.001). The insufficient number of professionals for quality care was the major source of stress for nursing technicians, whereas teamwork with doctors was the predominant factor for the evaluation of environment quality and high stress levels of nurses. Conclusion: Unfavorable practice environments increase the stress levels of nursing professionals in neonatal units and may compromise patient safety.

RESUMEN Objetivo: Evaluar la práctica profesional de enfermería en unidades neonatales y su relación con los niveles y las principales fuentes de estrés ocupacional. Método: Estudio transversal, descriptivo, exploratorio y correlacional conducido con profesionales de enfermería de unidades neonatales de cuatro hospitales públicos. Se aplicaron el cuestionario sociodemográfico/profesional, la versión brasileña de Practice Environment Scale y la Escala de Estrés en el Trabajo. En el análisis, se adoptaron la media, la desviación típica y las pruebas chi-cuadrado de Pearson, Razón de Verosimilitud y Mann Whitney U para la asociación entre las variables. Resultados: Los participantes fueron 269 profesionales. El ambiente de práctica fue evaluado como favorable por más de la mitad de la muestra (63,6%), con una asociación estadística significativa e inversamente proporcional con el estrés ocupacional (p < 0,001). El número insuficiente de profesionales para una atención de calidad fue la mayor fuente de estrés para las técnicas de enfermería, mientras que el trabajo en equipo con los médicos fue el factor predominante en la evaluación de la calidad del ambiente y del nivel de estrés elevado para las enfermeras. Conclusión: Los ambientes de práctica desfavorables aumentan el nivel de estrés de los profesionales de enfermería en las unidades neonatales y pueden comprometer la seguridad del paciente.

RESUMO Objetivo: Avaliar o ambiente de prática profissional da enfermagem em unidades neonatais e sua relação com os níveis e as principais fontes de estresse ocupacional. Método: Estudo transversal, descritivo, exploratório e correlacional, realizado com profissionais de enfermagem das unidades neonatais de quatro hospitais públicos. Aplicaram-se o questionário sociodemográfico/profissional, Versão Brasileira da Practice Environment Scale e a Escala de Estresse no Trabalho. Na análise, adotaram-se média, desvio padrão e testes qui-quadrado de Pearson, Razão de Verossimilhança e U de Mann Whitney para associação entre variáveis. Resultados: Participaram 269 profissionais. O ambiente de prática foi avaliado como favorável por mais da metade da amostra (63,6%), demonstrando associação estatística significante e inversamente proporcional com o estresse ocupacional (p < 0,001). O número insuficiente de profissionais para um cuidado de qualidade foi a maior fonte de estresse para as técnicas de enfermagem, enquanto o trabalho em equipe com médicos foi fator preponderante na avaliação da qualidade do ambiente e do nível de estresse elevado para as enfermeiras. Conclusão: Ambientes de prática desfavoráveis aumentam o nível de estresse de profissionais de enfermagem em unidades neonatais, podendo comprometer a segurança do paciente.

Assuntos

RESUMO

Abstract Introduction and objective : Contamination of the water used in health care units can induce adverse individual and collective consequences. The objective of this study was to evaluate the water quality in dental clinics of a dentistry program of a university in Brazil, calculating the total coliforms, thermotolerant coliforms, heterotrophic bacteria and pH. Materials and methods: In each clinic, water samples were collected for analysis at different points: external cistern, clinic faucet, dental chair tank and triple syringe. After sample collection, analysis was performed: the presence of total coliforms and thermotolerant coliforms was determined by chromogenic substrate technique, the presence or absence of Escherichia coli by fluorescence in ultraviolet light, the count of heterotrophic bacteria through the number of colonies and the determination of pH. Results: In all studied sites, the presence of total coliforms, Escherichia coli and thermotolerant coliforms was observed in at least 26% of the samples. In relation to CFU / ml, all mean values were much higher than the maximum established by legislation (500 CFU / ml). It was verified a statistically significant difference was found in the external cistern and tap when compared to the chair tank and triple syringe (p < 0.05). All pH samples were within the standards. Conclusion : The global analysis showed that 100% of the samples were inadequate, which classified the water potability as nonstandard in regard to the current Brazilian legislation.

Resumen Introducción y objetivo : La contaminación del agua utilizada en las unidades de salud puede inducir malas consecuencias individuales y colectivas. El objetivo de esta investigación fue evaluar la calidad del agua en clínicas odontológicas de una universidad en Brasil, a través del análisis de coliformes totales, coliformes termotolerantes, bacterias heterotróficas y pH. Materiales y métodos: En cada clínica, las muestras de agua fueron recolectadas para análisis en diferentes puntos: cisterna externa, grifo clínico, reservatorio de la silla odontológica y jeringa tríplice. Después de la recolección de las muestras, el análisis fue realizado: la presencia de coliformes totales y coliformes termotolerantes fue determinada por la técnica del sustrato cromogénico; la presencia o ausencia de Escherichia coli por fluorescencia en luz ultravioleta; el recuento de bacterias heterotróficas a través del número de colonias y de la determinación del pH. Resultados: En todos los puntos estudiados, se observó la presencia de coliformes totales, Escherichia coli y coliformes termotolerantes en al menos el 26% de las muestras. Respecto a la UFC / ml, todos los valores medios fueron muy superiores al máximo establecido por la legislación (500 UFC / ml). Todas las muestras de pH estaban dentro de los patrones. Conclusión : El análisis global mostró que el 100% de las muestras fueron inadecuadas, lo que clasificó la capacidad de agua como fuera del estándar en relación a la legislación brasileña actual.

Resumo Introdução e objetivo: A contaminação da água utilizada nas unidades de saúde pode induzir consequências adversas individuais e coletivas. O objetivo deste estudo foi avaliar a qualidade da água em clínicas odontológicas de um curso de odontologia de uma universidade no Brasil, através da análise de coliformes totais, coliformes termotolerantes, bactérias heterotróficas e pH. Materiais e métodos: Em cada clínica, amostras de água foram coletadas para análise em diferentes pontos: cisterna externa, torneira clínica, reservatório da cadeira odontológica e seringa tríplice. Após a coleta das amostras, a análise foi realizada: a presença de coliformes totais e coliformes termotolerantes foi determinada pela técnica do substrato cromogênico; a presença ou ausência de Escherichia coli por fluorescência em luz ultravioleta; a contagem de bactérias heterotróficas através do número de colônias e a determinação de pH. Resultados : Em todos os pontos estudados, a presença de coliformes totais, Escherichia coli e coliformes termotolerantes foi observada em pelo menos 26% das amostras. Em relação à UFC/ml, todos os valores médios foram muito superiores ao máximo estabelecido pela legislação (500 UFC/ml). Todas as amostras de pH estavam dentro dos padrões. Conclusão: A análise global mostrou que 100% das amostras foram inadequadas, o que classificou a capacidade de água como fora do padrão em relação à legislação brasileira atual.