RESUMO

This work reports a new method to evaluate the antioxidant capacity of infusions and beverages, based on superoxide radicals. Radicals produced by the enzymatic reaction between acetylcholinesterase and hypoxanthine oxidized antioxidant molecules present in commercially available samples or standard solutions, which was monitored by means of cyclic voltammetry using a carbon paste electrode. The Trolox equivalent antioxidant capacity (TEAC) of red wine, coffee and green tea determined using this method were: (1.20 ± 0.06), (0.90 ± 0.02), and (0.65 ± 0.02), respectively. This method suggested TEACred wine > TEACcoffee > TEACgreen tea, which is the same as DPPH, spectrophotometric method. However, the electrochemical one proposed here is rapid and simple.

Assuntos

RESUMO

This research presents the interaction of the epoxy polymer diglicydil ether of bisphenol-A (DGEBA) with silica (SiO2) nanoparticles plus zirconia (ZrO2) nanoparticles obtained via the sol-gel method in the synthesis of an epoxy-silica-zirconia hybrid adhesive cured with polyamide. ZrO2 nanoparticles were added to the epoxy-silica hybrid adhesive produced in situ to modify the apparent shear strength of two adhesively bonded aluminum specimens. The results showed that the addition of different amounts of ZrO2 nanoparticles increased the shear strength of the adhesively bonded aluminum joint, previously treated by sandblasting, immersion in hot water and silanized with a solution of hydrolyzed 3-glycidoxipropyltrimethoxysilane (GPTMS). The morphology and microstructure of the nanoparticles and aluminum surfaces were examined by scanning electron microscopy (SEM), and elemental analysis was performed with the Energy-dispersive X-ray spectroscopy (EDS) detector; the chemical groups were investigated during the aluminum surface modification using Fourier transform infrared spectroscopy (FTIR).

RESUMO

The working area of a screen-printed electrode, SPE, was modified with the enzyme tyrosinase (Tyr) using different immobilization methods, namely entrapment with water-soluble polyvinyl alcohol (PVA), cross-linking using glutaraldehyde (GA), and cross-linking using GA and human serum albumin (HSA); the resulting electrodes were termed SPE/Tyr/PVA, SPE/Tyr/GA and SPE/Tyr/HSA/GA, respectively. These biosensors were characterized by means of amperometry and EIS techniques. From amperometric evaluations, the apparent Michaelis-Menten constant, Km', of each biosensor was evaluated while the respective charge transfer resistance, Rct, was assessed from impedance measurements. It was found that the SPE/Tyr/GA had the smallest Km' (57 ± 7) µM and Rct values. This electrode also displayed both the lowest detection and quantification limits for catechol quantification. Using the SPE/Tyr/GA, the Trolox Equivalent Antioxidant Capacity (TEAC) was determined from infusions prepared with "mirto" (Salvia microphylla), "hHierba dulce" (Lippia dulcis) and "salve real" (Lippia alba), medicinal plants commonly used in Mexico.

Assuntos

RESUMO

This work deals with the formation of supramolecular complexes between ascorbic acid (AA), the guest, and ß-cyclodextrin (ß-CD), the host, that was first potentiodynamically immobilized on the surface of a carbon paste electrode (CPE) throughout the formation of a ß-CD-based conducting polymer (poly-ß-CD). With the bare CPE and the ß-CD-modified CPE, an electrochemical study was performed to understand the effect of such surface modification on the electrochemical response of the AA. From this study it was shown that on the modified-CPE, the AA was surface-immobilized through formation of an inclusion complex with ß-CD, which provoked the adsorption of AA in such a way that this stage became the limiting step for the electrochemical oxidation of AA. Moreover, from the analysis of the experimental voltammetric plots recorded during AA oxidation on the CPE/poly-ß-CD electrode surfaces, the Gibbs' standard free energy of the inclusion complex formed by the oxidation product of AA and ß-CD has been determined for the first time, ∆G0inclus = -36.4 kJ/mol.

Assuntos

RESUMO

A series of new mono-1,2,3-triazole derivatives of pyrimidine nucleobases were synthesized by one-pot copper(I)-catalyzed 1,3-dipolar cycloaddition reactions between N-1-propargyluracil and thymine, sodium azide and several benzyl halides. The desired heterocyclic compounds were obtained in good yields and characterized by NMR, IR, and high resolution mass spectrometry. These compounds were investigated as corrosion inhibitors for steel in 1 M HCl solution, using electrochemical impedance spectroscopy (EIS) technique. The results indicate that these heterocyclic compounds are promising acidic corrosion inhibitors for steel.

Assuntos

RESUMO

Ten 1,4-disubstituted 1,2,3-triazoles were synthesized from one of 1-(azido-methyl)benzene, 1-(azidomethyl)-4-fluorobenzene, 1-(azidomethyl)-4-chlorobenzene, 1-(azidomethyl)-4-bromobenzene or 1-(azidomethyl)-4-iodobenzene, generated in situ from sodium azide and the corresponding benzyl halide, and dipropargyl uracil or dipropargyl thymine. Optimal experimental conditions were established for the conventional click chemistry. The corrosion inhibiting properties of some of these compounds, which were determined by means of an electrochemical technique, are also presented.

Assuntos

RESUMO

This work presents the results obtained from a spectrophotometry study performed on some indicators of the sulfonphtaleins like phenol red (PR), thymol blue (TB), bromothymol blue (BTB), xylenol orange (XO) and methylthymol blue (MTB). During the first stage the acidity constants of some of the indicators were determined using the data from spectrophotometry, potentiometry and with the use of the software SQUAD. These were as follows: for the equilibrium 2H+BTB<-->H(2)BTB, log beta(2)=15.069+/-0.046 and for H+BTB<-->HBTB, log beta(1)=8.311+/-0.044. For the XO and the MTB five values were calculated for each, namely, for MTB: log beta(5)=42.035, log beta(4)=38.567+/-0.058, log beta(3)=32.257+/-0.057, log beta(2)=23.785+/-0.057, and log beta(1)=12.974+/-0.045 while for XO: log beta(5)=40.120+/-0.102, log beta(4)=35.158+/-0.062, log beta(3)=29.102+/-0.053, log beta(2)=21.237+/-0.044, and log beta(1)=11.682+/-0.044. During the second stage, a study was conducted on the effect of the substituents present in the indicators to determine the effect of different functional groups on the pK(a) value corresponding to the last indicator's dissociation.

Assuntos

RESUMO

This work presents the results concerning the first use of activated composite membranes (ACMs) for the removal of Hg(II) ions from aqueous solution, using as the ligand di-(2-ethylhexyl)dithiophosphoric acid (DTPA). The effects on the removal percentage of Hg(ll) of variables such as pH, the nature of the acid, the concentration of mercury (in the feed solutions), and the ligand content (in the membrane) as well as the total surface membrane area exposed to the Hg(II) aqueous solution were studied. During the course of the removal experiments, the membrane was immersed in the Hg(II) aqueous solution in acid media and samples of the solution were taken at different times to enable monitoring of the mercury concentration changes. Itwasfound that when the ACM was prepared with a 1.0 M DTPA casting solution and the feed solution contained 2.49 x 10(-4) M Hg(II) in HCI 0.1 M the amount of mercury extracted was higher than 93%. Straight forwardly, additional experiments were carried out with the free-DTPA composite membranes to make up a set of control reference points to verify that removal of the investigated heavy metal was a consequence of the presence of the organic ligand; otherwise there was no Hg(II) concentration variation at all.

Assuntos