RESUMO
Magnetic Fe-Cu nanocomposites with high adsorption capacity and photocatalytic properties were prepared via the precursor method using soluble substances isolated from urban biowaste (BBS) as carbon sources and different temperatures of the pyrolysis treatment (400, 600, and 800 °C). BBS is used as complexing agent for the Fe3+ and Cu2+ ions in the precursors. The as-prepared magnetic materials were tested in As(III) removal processes from water. Dark experiments performed with the materials obtained at 400 and 600 °C showed excellent adsorption capacities achieving a significant uptake of 911 and 840 mg g-1 for As(III), respectively. Experiments conducted under steady-state irradiation showed a reduction of 50-71% in As(III) levels evidencing the meaningful photocatalytic capacity of Fe-Cu nanocomposites. The best photocatalytic performance was obtained for the nanocomposite synthesized at the highest pyrolysis temperature, in line with the reported trend of HO· radicals production. Transient absorption spectroscopy experiments revealed the occurrence of an alternative oxidation pathway involving the valence band holes and yielded relevant kinetic information related to the early stages of the As(III) photooxidation. The higher absorption of the electron-hole pairs observed for the samples treated at lower temperature means that controlling the pyrolysis temperature during the synthesis of the Fe-Cu nanocomposites allows tuning the photocatalyst activity for oxidation of substrates via valence band holes, or via HO· radicals.
RESUMO
The use of iron-based nanomaterials for environmental remediation processes has recently received considerable attention. Here, we employed core-shell magnetite-humic acids nanoparticles as a heterogeneous photosensitizer and iron source in photo-Fenton reaction for the degradation of the psychiatric drug carbamazepine (CBZ). CBZ showed low photodegradation rates in the presence of the magnetic nanoparticles, whereas the addition of hydrogen peroxide at pH = 3 to the system drastically increased the abatement of the contaminant. The measured Fe2+ and Fe3+ profiles point to the generation of Fe3+ at the surface of the nanoparticles, indicating a heterogeneous oxidation of the contaminant mediated by hydroxyl radicals. Products with a higher transformation degree were observed in the photo-Fenton procedure and support the attack of the HO⢠radical on the CBZ molecule. Promising results encourage the use of the nanoparticles as efficient iron sources with enhanced magnet-sensitive properties, suitable for applications in photo-Fenton treatments for the purification of wastewater.
RESUMO
In this work, thermoresponsive polymer grafted magnetic mesoporous silica nanoparticles were prepared, fully characterized and tested as controlled drug delivery systems. For this purpose, iron oxide nanoparticles coated with mesoporous silica shell were grafted with poly(N-isopropylacrylamide-co-3-(methacryloxypropyl)trimethoxysilane) (PNIPAM-co-MPS). The grafting and polymerization on the as-prepared nanoparticles were performed in one-step procedure. Using this methodology, the polymer was successfully grafted mainly onto the silica surface, leaving the mesopores empty for the drug loading. The prepared hybrid nanoparticles (MMSNP-PNIPAM-co-MPS) showed high magnetization saturation (19.5â¯emuâ¯g-1) and high specific surface area (505â¯m2â¯g-1) and pore volume (0.29â¯cm3â¯g-1). Ibuprofen was used as a model drug to test the performance of the hybrid particles as thermosensitive drug delivery systems. For this, in vitro drug delivery tests were conducted below (25⯰C) and above (40⯰C) the lower critical solution temperature (LCST) of the polymer (PNIPAM-co-MPS). Considerable difference (80%) in the ibuprofen release at these two temperatures and a fast and complete release of the drug at 40⯰C was observed. These results suggest that the thermoresponsive copolymer acts as a gatekeeper for the temperature-controlled release of the drug loaded inside the mesopores. Therefore, MMSNP-PNIPAM-co-MPS are promising magnetic and thermoresponsive nanocarriers for targeted delivery of therapeutic substances.
Assuntos
Resinas Acrílicas/química , Portadores de Fármacos/química , Nanopartículas de Magnetita/química , Metacrilatos/química , Silanos/química , Dióxido de Silício/química , Óxido Ferroso-Férrico/química , Ibuprofeno/farmacologia , Tamanho da Partícula , Porosidade , Propriedades de Superfície , TemperaturaRESUMO
Peroxidase immobilization onto magnetic supports is considered an innovative strategy for the development of technologies that involves enzymes in wastewater treatment. In this work, magnetic biocatalysts were prepared by immobilization of soybean peroxidase (SBP) onto different silica-coated superparamagnetic iron oxide nanoparticles. The obtained magnetic biocatalysts were tested for the degradation of malachite green (MG), a pollutant often found in industrial wastewaters and with significant drawbacks for the human and environmental health. A deep physicochemical characterization of the materials was performed by means of X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), High Resolution-Transmission Electron Microscope (HR-TEM) and magnetization measurements among others techniques. Results showed high immobilization yield of SBP onto nanomaterials with excellent properties for magnetic recoverability. A partial loss of activity with respect to free SBP was observed, compatible with the modification of the conformational structure of the enzyme after immobilization. The structural modification depended on the amount (and thickness) of silica present in the hybrid materials and the activity yield of 43% was obtained for the best biocatalyst. Thermal stability and reusability capacity were also evaluated.
Assuntos
Enzimas Imobilizadas/química , Magnetismo , Nanopartículas de Magnetita/química , Peroxidase/química , Proteínas de Plantas/química , Dióxido de Silício/química , Biocatálise , Estabilidade Enzimática , Enzimas Imobilizadas/metabolismo , Compostos Férricos/química , Nanopartículas de Magnetita/ultraestrutura , Microscopia Eletrônica de Transmissão , Peroxidase/metabolismo , Proteínas de Plantas/metabolismo , Corantes de Rosanilina/química , Corantes de Rosanilina/metabolismo , Glycine max/enzimologia , Espectroscopia de Infravermelho com Transformada de Fourier , Temperatura , Difração de Raios XRESUMO
This paper describes the synthesis of paramegnetic iron-containing hydroxyapatite nanoparticles and their increased Cu(2+) sorbent capacity when using Ca(2+) complexes of soluble bioorganic substrates from urban wastes as synthesis precursors. A thorough characterization of the particles by TEM, XRD, FTIR spectroscopy, specific surface area, TGA, XPS, and DLS indicates that loss of crystallinity, a higher specific area, an increased surface oxygen content, and formation of surface iron phases strongly enhance Cu(2+) adsorption capacity of hydroxyapatite-based materials. However, the major effect of the surface and morphologycal modifications is the size diminution of the aggregates formed in aqueous solutions leading to an increased effective surface available for Cu(2+) adsorption. Maximum sorption values of 550-850 mg Cu(2+) per gram of particles suspended in an aqueous solution at pH 7 were determined, almost 10 times the maximum values observed for hydroxyapatite nanoparticles suspensions under the same conditions.