RESUMO

Novel bioactive nanoparticles derived from crude palm oil (CPO), palm olein, and palm stearin for use in foodstuff products were produced, and their physicochemical characteristics and stability were evaluated. The nanoparticles were prepared by homogenization, using biodegradable casein or gum arabic as an encapsulating material. The encapsulation efficiency (EE), morphology, long-term stability, particle size, polydispersity index, zeta potential, pH, apparent viscosity, color parameters, total carotenoids, and antioxidant activity were determined. All nanoparticles methods produced spherical nanoparticles with EE higher than 85%. Highly homogeneous small particles (<300 nm) showing a tendency toward a yellow color were observed after 60 days of storage at 4 °C. The nanoparticles showed a carotenoid retention index higher than 40% and an antioxidant activity higher than 1,000 µM Trolox/g oil. The bioactive nanoparticles retained the carotenoids and are proposed as a green innovative product to replace synthetic colorants and antioxidants in foodstuffs.

Assuntos

RESUMO

A variety of methods for producing cassava flour exist, resulting in very heterogeneous products that exhibit various colours, textures, granulometries, and flavours. To improve its attractiveness to consumers, some producers dye cassava flour with turmeric or tartrazine; however, this practice is illegal in Brazil. In this study, cassava flour samples were collected and evaluated for possible adulteration by the addition of dyes. Flours were analysed by CIELab and dye screening (paper chromatography and the turmeric-identification method) and a classification tree was developed using these data. Positive results for curcuminoid pigments or tartrazine were confirmed by HPLC-DAD or HPLC-UV-Vis, respectively. The developed approach is an innovative alternative chemometric-analysis method that facilitates highly practical screening; adulterated cassava flour, a product of great human-food importance, can be identified using CIELab parameters.

Assuntos

RESUMO

The objective was to develop and characterize a biodegradable packaging using chitosan as polymeric matrix, plasticized with glycerol, as well as evaluate the effect of adding a natural antioxidant additives (annatto) in antioxidant protection in packaging. The cans were prepared by casting containing 1.5% of chitosan, 0.15% glycerol and 0.25 to 1.0% of coloring. Palm oil packed with the films containing the additive was monitored at 0, 7, 15, 30 and 45 days of storage under accelerated oxidation conditions (63% UR/30°C). Palm oil packed in the film that contained the highest percentage of annatto (1.0%) was the least oxidized during the study period. It was found that, as they increase the losses of phenolic compounds in the formulations of the films, there is a reduction in the peroxide increases the packaged product, thus demonstrating that instead of the product, the compounds of the package's who are suffering oxidation.

O objetivo do trabalho foi desenvolver e caracterizar uma embalagem biodegradável, utilizando como matriz polimérica a quitosana, plastificada com glicerol, bem como avaliar o efeito da adição de um aditivo antioxidante natural (urucum) nas embalagens na proteção antioxidante. As embalagens foram preparadas por casting contendo 1,5% de quitosana, 0,15% de glicerol e 0,25 a 1,0% de urucum. O azeite de dendê embalado com os filmes contendo o aditivo foi monitorado aos 0, 7, 15, 30 e 45 dias de armazenamento sob condições de oxidação acelerada (63%UR/30°C). O azeite de dendê embalado no filme que continha o maior percentual de urucum (1,0%) foi o que menos oxidou ao longo do período estudado. Constatou-se que, à medida que aumentam as perdas de Fenóis Totais nas formulações dos filmes, ocorre uma redução nos aumentos do Índice de Peróxidos do produto embalado, demonstrando assim que, ao invés do produto, os compostos da embalagem é quem estão sofrendo oxidação.

RESUMO

The objective was to develop and characterize a biodegradable packaging using chitosan as polymeric matrix, plasticized with glycerol, as well as evaluate the effect of adding a natural antioxidant additives (annatto) in antioxidant protection in packaging. The cans were prepared by casting containing 1.5% of chitosan, 0.15% glycerol and 0.25 to 1.0% of coloring. Palm oil packed with the films containing the additive was monitored at 0, 7, 15, 30 and 45 days of storage under accelerated oxidation conditions (63% UR/30°C). Palm oil packed in the film that contained the highest percentage of annatto (1.0%) was the least oxidized during the study period. It was found that, as they increase the losses of phenolic compounds in the formulations of the films, there is a reduction in the peroxide increases the packaged product, thus demonstrating that instead of the product, the compounds of the package's who are suffering oxidation.

O objetivo do trabalho foi desenvolver e caracterizar uma embalagem biodegradável, utilizando como matriz polimérica a quitosana, plastificada com glicerol, bem como avaliar o efeito da adição de um aditivo antioxidante natural (urucum) nas embalagens na proteção antioxidante. As embalagens foram preparadas por casting contendo 1,5% de quitosana, 0,15% de glicerol e 0,25 a 1,0% de urucum. O azeite de dendê embalado com os filmes contendo o aditivo foi monitorado aos 0, 7, 15, 30 e 45 dias de armazenamento sob condições de oxidação acelerada (63%UR/30°C). O azeite de dendê embalado no filme que continha o maior percentual de urucum (1,0%) foi o que menos oxidou ao longo do período estudado. Constatou-se que, à medida que aumentam as perdas de Fenóis Totais nas formulações dos filmes, ocorre uma redução nos aumentos do Índice de Peróxidos do produto embalado, demonstrando assim que, ao invés do produto, os compostos da embalagem é quem estão sofrendo oxidação.

RESUMO

The objective was to develop and characterize a biodegradable packaging using chitosan as polymeric matrix, plasticized with glycerol, as well as evaluate the effect of adding a natural antioxidant additives (annatto) in antioxidant protection in packaging. The cans were prepared by casting containing 1.5% of chitosan, 0.15% glycerol and 0.25 to 1.0% of coloring. Palm oil packed with the films containing the additive was monitored at 0, 7, 15, 30 and 45 days of storage under accelerated oxidation conditions (63% UR/30°C). Palm oil packed in the film that contained the highest percentage of annatto (1.0%) was the least oxidized during the study period. It was found that, as they increase the losses of phenolic compounds in the formulations of the films, there is a reduction in the peroxide increases the packaged product, thus demonstrating that instead of the product, the compounds of the package's who are suffering oxidation.

O objetivo do trabalho foi desenvolver e caracterizar uma embalagem biodegradável, utilizando como matriz polimérica a quitosana, plastificada com glicerol, bem como avaliar o efeito da adição de um aditivo antioxidante natural (urucum) nas embalagens na proteção antioxidante. As embalagens foram preparadas por casting contendo 1,5% de quitosana, 0,15% de glicerol e 0,25 a 1,0% de urucum. O azeite de dendê embalado com os filmes contendo o aditivo foi monitorado aos 0, 7, 15, 30 e 45 dias de armazenamento sob condições de oxidação acelerada (63%UR/30°C). O azeite de dendê embalado no filme que continha o maior percentual de urucum (1,0%) foi o que menos oxidou ao longo do período estudado. Constatou-se que, à medida que aumentam as perdas de Fenóis Totais nas formulações dos filmes, ocorre uma redução nos aumentos do Índice de Peróxidos do produto embalado, demonstrando assim que, ao invés do produto, os compostos da embalagem é quem estão sofrendo oxidação.

RESUMO

The objective was to develop biodegradable packaging using a polymer matrix as the cassava starch plasticized with glycerol and reinforced with the incorporation of nanocelulose of coconut fiber, as well as to evaluate the effect of the addition of an additive nature (yerba mate) in nanobiocompósitos formulations with antioxidant action. The nanocrystal cellulose (L/D=39) were obtained by acid hydrolysis with 65% H2SO4. The films were prepared by casting containing 4.5 and 6.0% starch, 0.5 and 1.5% glycerol, 0.3% nanocelulose and 20% extract of yerba mate. The palm oil storage packed with films containing the additive was monitored for 40 days under conditions of accelerated oxidation (63%UR/30°C). It was found that as the losses increase polyphenol films, there is a smaller increase of the peroxide value of the packaged product, thus demonstrating that instead of the product, the compounds of the package's who are suffering oxidation. The incorporation of yerba mate extract did not alter the mechanical and barrier properties of these films.

O objetivo do trabalho foi desenvolver uma embalagem biodegradável utilizando como matriz polimérica o amido de mandioca plastificada com glicerol e reforçada com a incorporação de nanocelulose da fibra de coco, bem como, avaliar o efeito da adição de um aditivo natural (erva-mate) nas formulações de nanobiocompósitos com ação antioxidante. Os nanocristais de celulose (L/D=39) foram obtidos por hidrólise ácida com H2SO4 a 65%. Os filmes foram preparados por casting contendo 4,5 e 6,0% de amido, 0,5 e 1,5% de glicerol, 0,3% de nanocelulose e 20% de extrato de erva-mate. O armazenamento do azeite de dendê embalado com os filmes contendo o aditivo foi monitorado por 40 dias sob condições de oxidação acelerada (63%UR/30°C). Constatou-se que, à medida que aumentam as perdas de Polifenóis Totais nos filmes, ocorre um menor aumento do Índice de Peróxidos do produto embalado, demonstrando, assim, que, ao invés do produto, os compostos da embalagem é quem estão sofrendo oxidação. A incorporação de extrato de erva-mate não alterou as propriedades mecânicas e de barreira desses filmes.

RESUMO

The objective was to develop biodegradable packaging using a polymer matrix as the cassava starch plasticized with glycerol and reinforced with the incorporation of nanocelulose of coconut fiber, as well as to evaluate the effect of the addition of an additive nature (yerba mate) in nanobiocompósitos formulations with antioxidant action. The nanocrystal cellulose (L/D=39) were obtained by acid hydrolysis with 65% H2SO4. The films were prepared by casting containing 4.5 and 6.0% starch, 0.5 and 1.5% glycerol, 0.3% nanocelulose and 20% extract of yerba mate. The palm oil storage packed with films containing the additive was monitored for 40 days under conditions of accelerated oxidation (63%UR/30°C). It was found that as the losses increase polyphenol films, there is a smaller increase of the peroxide value of the packaged product, thus demonstrating that instead of the product, the compounds of the package's who are suffering oxidation. The incorporation of yerba mate extract did not alter the mechanical and barrier properties of these films.

O objetivo do trabalho foi desenvolver uma embalagem biodegradável utilizando como matriz polimérica o amido de mandioca plastificada com glicerol e reforçada com a incorporação de nanocelulose da fibra de coco, bem como, avaliar o efeito da adição de um aditivo natural (erva-mate) nas formulações de nanobiocompósitos com ação antioxidante. Os nanocristais de celulose (L/D=39) foram obtidos por hidrólise ácida com H2SO4 a 65%. Os filmes foram preparados por casting contendo 4,5 e 6,0% de amido, 0,5 e 1,5% de glicerol, 0,3% de nanocelulose e 20% de extrato de erva-mate. O armazenamento do azeite de dendê embalado com os filmes contendo o aditivo foi monitorado por 40 dias sob condições de oxidação acelerada (63%UR/30°C). Constatou-se que, à medida que aumentam as perdas de Polifenóis Totais nos filmes, ocorre um menor aumento do Índice de Peróxidos do produto embalado, demonstrando, assim, que, ao invés do produto, os compostos da embalagem é quem estão sofrendo oxidação. A incorporação de extrato de erva-mate não alterou as propriedades mecânicas e de barreira desses filmes.