RESUMEN

INTRODUCTION: Pancreatic cancer (PC) remains a challenging malignancy, and adjuvant chemotherapy is critical in improving patient survival post-surgery. However, the intrinsic heterogeneity of PC necessitates personalized treatment strategies, highlighting the need for reliable preclinical models. OBJECTIVES: This study aimed to develop novel patient-derived preclinical PC models using three-dimensional bioprinting (3DP) technology. METHODS: Patient-derived PC models were established using 3DP technology. Genomic and histological analyses were performed to characterize these models and compare them with corresponding patient tissues. Chemotherapeutic drug sensitivity tests were conducted on the PC 3DP models, and correlations with clinical outcomes were analyzed. RESULTS: The study successfully established PC 3DP models with a modeling success rate of 86.96%. These models preserved genomic and histological features consistent with patient tissues. Drug sensitivity testing revealed significant heterogeneity among PC 3DP models, mirroring clinical variability, and potential correlations with clinical outcomes. CONCLUSION: The PC 3DP models demonstrated their utility as reliable preclinical tools, retaining key genomic and histological characteristics. Importantly, drug sensitivity profiles in these models showed potential correlations with clinical outcomes, indicating their promise in customizing treatment strategies and predicting patient prognoses. Further validation with larger patient cohorts is warranted to confirm their potential clinical utility.

RESUMEN

In this paper, a biomimetic skin microtissue biosensor was developed based on three-dimensional (3D) bioprinting to precisely and accurately determine fish parvalbumin (FV). Based on the principle that allergens stimulate cells to produce ONOO- (peroxynitrite anion), a screen-printed electrode for the detection nanomolar level ONOO- was innovatively prepared to indirectly detect FV based on the level of ONOO- release. Gelatin methacryloyl (GelMA), RBL-2H3 cells, and MS1 cells were used as bio-ink for 3D bioprinting. The high-throughput and standardized preparation of skin microtissue was achieved using stereolithography 3D bioprinting technology. The printed skin microtissues were put into the self-designed 3D platform that integrated cell culture and electrochemical detection. The experimental results showed that the sensor could effectively detect FV when the optimized ratio of RBL-2H3 to MS1 cells and allergen stimulation time were 2:8 and 2 h, respectively. The linear detection range was 0.125-3.0 µg/mL, and the calculated lowest detection limit was 0.122 µg/mL. In addition, the sensor had excellent selectivity, specificity, stability, and reliability. Thus, this study successfully constructed a biomimetic skin microtissue electrochemical sensor for PV detection.

RESUMEN

INTRODUCTION: Colorectal cancer (CRC) remains one of the leading causes of cancer-related morbidity and mortality worldwide. This disease is complex and heterogeneous, influenced by a variety of genetic, epigenetic, and environmental factors that drive CRC initiation and progression. Despite advances in therapeutic strategies, the five-year survival rate for metastatic CRC is alarmingly low. Traditional two-dimensional (2D) cell culture systems have been the foundation of cancer research, but their inability to replicate the complex tumor microenvironment (TME) limits their effectiveness. AREAS COVERED: This paper explores the evolution of CRC models, starting with the limitations of traditional 2D cell culture systems and the significant advancements offered by 3D models. Additionally, it highlights 3D bioprinting and on-chip CRC models, which have enhanced the ability to mimic in vivo conditions. EXPERT OPINION: The transition to advanced 3D models represents a pivotal shift in CRC research, offering considerable improvements over the established 2D models. These models hold promise for the development of patient-specific models that better mimic in vivo conditions. However, the inherent complexity of CRC continues to pose challenges in developing models that can fully capture the disease's multifaceted nature. This complexity and high costs associated with these technologies, along with the need for standardized protocols, pose significant challenges to their widespread adoption.

RESUMEN

Fabricating three-dimensional (3D) scaffolds is attractive due to various advantages for tissue engineering, such as cell migration, proliferation, and adhesion. Since cell growth depends on transmitting nutrients and cell residues, naturally vascularized scaffolds are superior for tissue engineering. Vascular passages help the inflow and outflow of liquids, nutrients, and waste disposal from the scaffold and cell growth. Porous scaffolds can be prepared by plant tissue decellularization which allows for the cultivation of various cell lines depending on the intended application. To this end, researchers decellularize plant tissues by specific chemical and physical methods. Researchers use plant parts depending on their needs, for example, decellularizing the leaves, stems, and fruits. Plant tissue scaffolds are advantageous for regenerative medicine, wound healing, and bioprinting. Studies have examined various plants such as vegetables and fruits such as orchid, parsley, spinach, celery, carrot, and apple using various materials and techniques such as sodium dodecyl sulfate, Triton X-100, peracetic acid, deoxyribonuclease, and ribonuclease with varying percentages, as well as mechanical and physical techniques like freeze-thaw cycles. The process of data selection, retrieval, and extraction in this review relied on scholarly journal publications and other relevant papers related to the subject of decellularization, with a specific emphasis on plant-based research. The obtained results indicate that, owing to the cellulosic structure and vascular nature of the decellularized plants and their favorable hydrophilic and biological properties, they have the potential to serve as biological materials and natural scaffolds for the development of 3D-printing inks and scaffolds for tissue engineering.

RESUMEN

Articular cartilage is an avascular tissue with very limited capacity of self-regeneration. Trauma or injury-related defects, inflammation, or aging in articular cartilage can induce progressive degenerative joint diseases such as osteoarthritis. There are significant clinical demands for the development of effective therapeutic approaches to promote articular cartilage repair or regeneration. The current treatment modalities used for the repair of cartilage lesions mainly include cell-based therapy, small molecules, surgical approaches, and tissue engineering. However, these approaches remain unsatisfactory. With the advent of three-dimensional (3D) bioprinting technology, tissue engineering provides an opportunity to repair articular cartilage defects or degeneration through the construction of organized, living structures composed of biomaterials, chondrogenic cells, and bioactive factors. The bioprinted cartilage-like structures can mimic native articular cartilage, as opposed to traditional approaches, by allowing excellent control of chondrogenic cell distribution and the modulation of biomechanical and biochemical properties with high precision. This review focuses on various hydrogels, including natural and synthetic hydrogels, and their current developments as bioinks in 3D bioprinting for cartilage tissue engineering. In addition, the challenges and prospects of these hydrogels in cartilage tissue engineering applications are also discussed.

RESUMEN

Objective: To review the research progress on the application of three-dimensional (3D) bioprinting technology in auricle repair and reconstruction. Methods: The recent domestic and international research literature on 3D printing and auricle repair and reconstruction was extensively reviewed, and the concept of 3D bioprinting technology and research progress in auricle repair and reconstruction were summarized. Results: The auricle possesses intricate anatomical structure and functionality, necessitating precise tissue reconstruction and morphological replication. Hence, 3D printing technology holds immense potential in auricle reconstruction. In contrast to conventional 3D printing technology, 3D bioprinting technology not only enables the simulation of auricular outer shape but also facilitates the precise distribution of cells within the scaffold during fabrication by incorporating cells into bioink. This approach mimics the composition and structure of natural tissues, thereby favoring the construction of biologically active auricular tissues and enhancing tissue repair outcomes. Conclusion: 3D bioprinting technology enables the reconstruction of auricular tissues, avoiding potential complications associated with traditional autologous cartilage grafting. The primary challenge in current research lies in identifying bioinks that meet both the mechanical requirements of complex tissues and biological criteria.

Asunto(s)

RESUMEN

Mohs Micrographic Surgery (MMS) is effective for treating common cutaneous malignancies, but complex repairs may often present challenges for reconstruction. This paper explores the potential of three-dimensional (3D) bioprinting in MMS, offering superior outcomes compared to traditional methods. 3D printing technologies show promise in advancing skin regeneration and refining surgical techniques in dermatologic surgery. A PubMed search was conducted using the following keywords: "Three-dimensional bioprinting" OR "3-D printing" AND "Mohs" OR "Mohs surgery" OR "Surgery." Peer-reviewed English articles discussing medical applications of 3D bioprinting were included, while non-peer-reviewed and non-English articles were excluded. Patients using 3D MMS models had lower anxiety scores (3.00 to 1.7, p < 0.0001) and higher knowledge assessment scores (5.59 or 93.25% correct responses), indicating better understanding of their procedure. Surgical residents using 3D models demonstrated improved proficiency in flap reconstructions (p = 0.002) and knowledge assessment (p = 0.001). Additionally, 3D printing offers personalized patient care through tailored surgical guides and anatomical models, reducing intraoperative time while enhancing surgical. Concurrently, efforts in tissue engineering and regenerative medicine are being explored as potential alternatives to address organ donor shortages, eliminating autografting needs. However, challenges like limited training and technological constraints persist. Integrating optical coherence tomography with 3D bioprinting may expedite grafting, but challenges remain in pre-printing grafts for complex cases. Regulatory and ethical considerations are paramount for patient safety, and further research is needed to understand long-term effects and cost-effectiveness. While promising, significant advancements are necessary for full utilization in MMS.

Asunto(s)

RESUMEN

Three-dimensional (3D) bioprinting has emerged as a revolutionary additive manufacturing technology that can potentially enable life-changing medical treatments in regenerative medicine. It applies the principles of tissue engineering for the printing of tissues and organs in a layer-by-layer manner. This review focuses on the various 3D bioprinting technologies currently available, the different biomaterials, cells, and growth factors that can be utilized to develop tissue-specific bioinks, the different venues for applying these technologies, and the challenges this technology faces.

RESUMEN

In this study, we evaluated the use of graphene oxide (GO) mixed with methyl methacrylate gelatin (GelMA) for the construction of a microenvironmental implant to repair bone defects in orthopedic surgery. A scaffold containing a GelMA/GO composite with mesenchymal stem cells (MSCs) was constructed using three-dimensional bioprinting. The survival and osteogenic capacity of MSCs in the composite bioink were evaluated using cell viability and proliferation assays, osteogenesis-related gene expression analysis, and implantation under the skin of nude mice. The printing process had little effect on cell viability. We found that GO enhanced cell proliferation but had no significant effect on cell viability. In vitro experiments suggested that GO promoted material-cell interactions and the expression of osteogenesis-related genes. In vivo experiments showed that GO decreased the degradation time of the material and increased calcium nodule deposition. In contrast to pure GelMA, the addition of GO created a suitable microenvironment to promote the differentiation of loaded exogenous MSCs in vitro and in vivo, providing a basis for the repair of bone defects.

Asunto(s)

RESUMEN

A novel 3D bio-printing vascular microtissue biosensor was developed to detect fish parvalbumin quickly. The graphite rod electrode was modified with gold and copper organic framework (Cu-MOF) to improve the sensor properties. Polydopamine-modified multi-wall carbon nanotubes (PDA-MWCNT) were mixed with gelatin methacryloyl (GelMA) to prepare a conductive hydrogel. The conductive hydrogel was mixed with mast cells and endothelial cells to produce a bio-ink for 3D bioprinting. High throughput and standardized preparation of vascular microtissue was performed by stereolithography 3D bioprinting. The vascular microtissue was immobilized on the modified electrode to construct the microtissue sensor. The biosensor's peak current was positively correlated with the fish parvalbumin concentration, and the detection linear concentration range was 0.1 ∼ 2.5 µg/mL. The standard curve equation was IDPV(µA) = 31.30 + 5.46 CPV(µg/mL), the correlation coefficient R2 was 0.990 (n = 5), and the detection limit was 0.065 µg/mL. These indicated a biomimetic microtissue sensor detecting fish parvalbumin has been successfully constructed.

Asunto(s)

RESUMEN

Osteoarthritis (OA) is a joint disorder caused by wear and tear of the cartilage that cushions the joints. It is a progressive condition that can cause significant pain and disability. Currently, there is no cure for OA, though there are treatments available to manage symptoms and slow the progression of the disease. A chondral defect is a common and devastating lesion that is challenging to treat due to its avascular and aneural nature. However, there are conventional therapies available, ranging from microfracture to cell-based therapy. Anyhow, its efficiency in cartilage defects is limited due to unclear cell viability. Exosomes have emerged as a potent therapeutic tool for chondral defects because they are a complicated complex containing cargo of proteins, DNA, and RNA as well as the ability to target cells due to their phospholipidic composition and the altering exosomal contents that boost regeneration potential. Exosomes are used in a variety of applications, including tissue healing and anti-inflammatory therapy. As in recent years, biomaterials-based bio fabrication has gained popularity among the many printable polymer-based hydrogels, tissue-specific decellularized extracellular matrix might boost the effects rather than an extracellular matrix imitating environment, a short note has been discussed. Exosomes are believed to be the greatest alternative option for current cell-based therapy, and future progress in exosome-based therapy could have a greater influence in the field of orthopaedics. The review focuses extensively on the insights of exosome use and scientific breakthroughs centered OA.

RESUMEN

Tissue-engineered skin is an effective material for treating large skin defects in a clinical setting. However, its use is limited owing to vascular complications. Human adipose tissue-derived microvascular fragments (HaMVFs) are vascularized units that form vascular networks by rapid reassembly. In this study, we designed a vascularized bionic skin tissue using a three-dimensional (3D) bioprinter of HaMVFs and human fibroblasts encapsulated in a hybrid hydrogel composed of GelMA, HAMA, and fibrinogen. Tissues incorporating HaMVFs showed good in vitro vascularization and mechanical properties after UV crosslinking and thrombin exposure. Thus, the tissue could be sutured appropriately to the wound. In vivo, the vascularized 3D bioprinted skin promoted epidermal regeneration, collagen maturation in the dermal tissue, and vascularization of the skin tissue to accelerate wound healing. Overall, vascularized 3D bioprinted skin with HaMVFs is an effective material for treating skin defects and may be clinically applicable to reduce the necrosis rate of skin grafts.

Asunto(s)

RESUMEN

Transplantation of tissue-engineered trachea is an effective treatment for long-segment tracheal injury. This technology avoids problems associated with a lack of donor resources and immune rejection, generating an artificial trachea with good biocompatibility. To our knowledge, a systematic summary of basic and clinical research on tissue-engineered trachea in the last 20 years has not been conducted. Here, we analyzed the development trends of tissue-engineered trachea research by bibliometric means and outlined the future perspectives in this field. The Web of Science portal was selected as the data source. CiteSpace, VOSviewer, and the Bibliometric Online Analysis Platform were used to analyze the number of publications, journals, countries, institutions, authors, and keywords from 475 screened studies. Between 2000 and 2023, the number of published studies on tissue-engineered trachea has been increasing. Biomaterials published the largest number of papers. The United States and China have made the largest contributions to this field. University College London published the highest number of studies, and the most productive researcher was an Italian scholar, Paolo Macchiarini. However, close collaborations between various researchers and institutions from different countries were generally lacking. Despite this, keyword analysis showed that manufacturing methods for tracheal stents, hydrogel materials, and 3D bioprinting technology are current popular research topics. Our bibliometric study will help scientists in this field gain an in-depth understanding of the current research progress and development trends to guide their future work, and researchers in related fields will benefit from the introduction to transplantation methods of tissue-engineered trachea.

We conducted a comprehensive bibliometric analysis of tissue-engineered trachea.We systematically outlined the preparation methods and current development forms of tissue-engineered trachea.We predicted future tissue-engineered trachea research trends from the perspectives of countries, institutions, researchers, and popular research topics.

Asunto(s)

RESUMEN

Three-dimensional (3D) bioprinting is a unique combination of technological advances in 3D printing and tissue engineering. It has emerged as a promising approach to address the dilemma in current dental treatments faced by clinicians in order to repair or replace injured and diseased tissues. The exploration of 3D bioprinting technology provides high reproducibility and precise control of the bioink containing the desired cells and biomaterial over the architectural and dimensional features of the scaffolds in fabricating functional tissue constructs that are specific to the patient treatment need. In recent years, the dental applications of different 3D bioprinting techniques, types of novel bioinks, and the types of cells used have been extensively explored. Most of the findings noted significant challenges compared to the non-biological 3D printing approach in constructing the bioscaffolds that mimic native tissues. Hence, this review focuses solely on the implementation of 3D bioprinting techniques and strategies based on cell-laden bioinks. It discusses the in vitro applications of 3D-bioprinted scaffolds on cell viabilities, cell functionalities, differentiation ability, and expression of the markers as well as the in vivo evaluations of the implanted bioscaffolds on the animal models for bone, periodontal, dentin, and pulp tissue regeneration. Finally, it outlines some perspectives for future developments in dental applications.

Asunto(s)

RESUMEN

The coronary artery bypass grafting is a main treatment for restoring the blood supply to the ischemic site by bypassing the narrow part, thereby improving the heart function of the patients. Autologous blood vessels are preferred in coronary artery bypass grafting, but their availability is often limited by due to the underlying disease. Thus, tissue-engineered vascular grafts that are devoid of thrombosis and have mechanical properties comparable to those of natural vessels are urgently required for clinical applications. Most of the commercially available artificial implants are made from polymers, which are prone to thrombosis and restenosis. The biomimetic artificial blood vessel containing vascular tissue cells is the most ideal implant material. Due to its precision control ability, three-dimensional (3D) bioprinting is a promising method to prepare biomimetic system. In the 3D bioprinting process, the bioink is at the core state for building the topological structure and keeping the cell viable. Therefore, in this review, the basic properties and viable materials of the bioink are discussed, and the research of natural polymers in bioink, including decellularized extracellular matrix, hyaluronic acid, and collagen, is emphasized. Besides, the advantages of alginate and Pluronic F127, which are the mainstream sacrificial material during the preparation of artificial vascular graft, are also reviewed. Finally, an overview of the applications in the field of artificial blood vessel is also presented.

RESUMEN

The musculoskeletal system, consisting of bones and cartilage of various types, muscles, ligaments, and tendons, is the basis of the human body. However, many pathological conditions caused by aging, lifestyle, disease, or trauma can damage its elements and lead to severe disfunction and significant worsening in the quality of life. Due to its structure and function, articular (hyaline) cartilage is the most susceptible to damage. Articular cartilage is a non-vascular tissue with constrained self-regeneration capabilities. Additionally, treatment methods, which have proven efficacy in stopping its degradation and promoting regeneration, still do not exist. Conservative treatment and physical therapy only relieve the symptoms associated with cartilage destruction, and traditional surgical interventions to repair defects or endoprosthetics are not without serious drawbacks. Thus, articular cartilage damage remains an urgent and actual problem requiring the development of new treatment approaches. The emergence of biofabrication technologies, including three-dimensional (3D) bioprinting, at the end of the 20th century, allowed reconstructive interventions to get a second wind. Three-dimensional bioprinting creates volume constraints that mimic the structure and function of natural tissue due to the combinations of biomaterials, living cells, and signal molecules to create. In our case-hyaline cartilage. Several approaches to articular cartilage biofabrication have been developed to date, including the promising technology of 3D bioprinting. This review represents the main achievements of such research direction and describes the technological processes and the necessary biomaterials, cell cultures, and signal molecules. Special attention is given to the basic materials for 3D bioprinting-hydrogels and bioinks, as well as the biopolymers underlying the indicated products.

RESUMEN

In this paper, a novel "liver lobule" microtissue biosensor based on 3D bio-printing is developed to rapidly determine aflatoxin B1 (AFB1). Methylacylated Hyaluronic acid (HAMA) hydrogel, HepG2 cells, and carbon nanotubes are used to construct "liver lobule" models. In addition, 3D bio-printing is used to perform high-throughput and standardized preparation in order to simulate the organ morphology and induce functional formation. Afterwards, based on the electrochemical rapid detection technology, a 3D bio-printed "liver lobule" microtissue is immobilized on the screen-printed electrode, and the mycotoxin is detected by differential pulse voltammetry (DPV). The DPV response increases with the concentration of AFB1 in the range of 0.1-3.5 µg/mL. The linear detection range is 0.1-1.5 µg/mL and the calculated lowest detection limit is 0.039 µg/mL. Thus, this study develops a new mycotoxin detection method based on the 3D printing technology, which has high stability and reproducibility. It has wide application prospects in the field of detection and evaluation of food hazards.

Asunto(s)

RESUMEN

Cartilage damage is a common orthopedic disease, which can be caused by sports injury, obesity, joint wear, and aging, and cannot be repaired by itself. Surgical autologous osteochondral grafting is often required in deep osteochondral lesions to avoid the later progression of osteoarthritis. In this study, we fabricated a gelatin methacryloyl-marrow mesenchymal stem cells (GelMA-MSCs) scaffold by three-dimensional (3D) bioprinting. This bioink is capable of fast gel photocuring and spontaneous covalent cross-linking, which can maintain high viability of MSCs and provide a benign microenvironment to promote the interaction, migration, and proliferation of cells. In vivo experiments, further, proved that the 3D bioprinting scaffold can promote the regeneration of cartilage collagen fibers and have a remarkable effect on cartilage repair of rabbit cartilage injury model, which may represent a general and versatile strategy for precise engineering of cartilage regeneration system.