RESUMEN

Topological defects are inevitable existence in carbon-based frameworks, but their intrinsic electrocatalytic activity and mechanism remain under-explored. Herein, the hydrogen evolution reaction (HER) of pentagonal carbon-rings is probed by constructing pentagonal ring-rich carbon (PRC), with optimized electronic structures and higher HER activity relative to common hexagonal carbon (HC). Furthermore, to improve the reactivity, we couple Ru clusters with PRC (Ru@PRC) through p-d orbital hybridization between C and Ru atoms, which drives a shortcut transfer of electrons from Ru clusters to pentagonal rings. The electron-deficient Ru species leads to a notable negative shift in d-band centers of Ru and weakens their binding strength with hydrogen intermediates, thus enhancing the HER activity in different pH media. Especially, at a current density of 10 mA cm-2, PRC greatly reduces alkaline HER overpotentials from 540 to 380 mV. And Ru@PRC even exhibits low overpotentials of 28 and 275 mV to reach current densities of 10 and 1000 mA cm-2, respectively. Impressively, the mass activity and price activity of Ru@PRC are 7.83 and 15.7 times higher than that of Pt/C at the overpotential of 50 mV. Our data unveil the positive HER reactivity of pentagonal defects and good application prospects.

RESUMEN

Strong metal-support interaction (SMSI) plays a vital role in tuning the geometric and electronic structures of metal species. Generally, a high-temperature treatment (>500 °C) in reducing atmosphere is required for constructing SMSI, which may induce the sintering of metal species. Herein, we use molten salts as the reaction media to trigger the formation of high-intensity SMSI at reduced temperatures. The strong ionic polarization of the molten salt promotes the breakage of Ti-O bonds in the TiO2 support, and hence decreases the energy barrier for the formation of interfacial bonds. Consequently, a high-intensity SMSI state is achieved in TiO2 supported Ir nanoclusters, evidenced by a large number of Ir-Ti bonds at the interface, at a low temperature of 350 °C. Moreover, this method is applicable for triggering SMSI in various supported metal catalysts with different oxide supports including CeO2 and SnO2. This newly developed SMSI construction methodology opens a new avenue and holds significant potential for engineering advanced supported metal catalysts toward a broad range of applications.

RESUMEN

The strong metal-support interaction (SMSI) in supported catalysts plays a dominant role in catalytic degradation, upgrading, and remanufacturing of environmental pollutants. Previous studies have shown that SMSI is crucial in supported catalysts' activity and stability. However, for redox reactions catalyzed in environmental catalysis, the enhancement mechanism of SMSI-induced oxygen vacancy and electron transfer needs to be clarified. Additionally, the precise control of SMSI interface sites remains to be fully understood. Here we provide a systematic review of SMSI's catalytic mechanisms and control strategies in purifying gaseous pollutants, treating organic wastewater, and valorizing biomass solid waste. We explore the adsorption and activation mechanisms of SMSI in redox reactions by examining interfacial electron transfer, interfacial oxygen vacancy, and interfacial acidic sites. Furthermore, we develop a precise regulation strategy of SMSI from systematical perspectives of interface effect, crystal facet effect, size effect, guest ion doping, and modification effect. Importantly, we point out the drawbacks and breakthrough directions for SMSI regulation in environmental catalysis, including partial encapsulation strategy, size optimization strategy, interface oxygen vacancy strategy, and multi-component strategy. This review article provides the potential applications of SMSI and offers guidance for its controlled regulation in environmental catalysis.

RESUMEN

Precise control over the size, species, and breakthrough of the activity-selectivity trade-off are great challenges for sub-nano non-noble metal catalysts. Here, for the first time, a "multiheteroatom induced SMSI + in situ P activation" strategy that enables high stability and effective construction of sub-2 nm metal sites for optimizing selective hydrogenation performance is developed. It is synthesized the smallest metal phosphide clusters (<2 nm) including from unary to ternary non-noble metal systems, accompanied by unprecedented thermal stability. In the proof-of-concept demonstration, further modulation of size and species results in the creation of a sub-2 nm site platform, directionally achieving single atom (Ni1), Ni1+metal cluster (Ni1+Nin), or novel Ni1+metal phosphide cluster synergistic sites (Ni1+Ni2Pn), respectively. Based on thorough structure and mechanism investigation, it is found the Ni1+Ni2Pn site is motivated to achieve electronic structure self-optimizing through synergistic SMSI and site coupling effect. Therefore, it speeds up the substrate adsorption-desorption kinetics in semihydrogenation of alkyne and achieves superior catalytic activity that is 56 times higher than the Ni1 site under mild conditions. Compared to traditional active sites, this may represent the highly effective integration of atom utilization, thermal stability, and favorable site requirements for chemisorption properties and reactivities of substrates.

RESUMEN

Precisely controlling the microstructure of supported metal catalysts and regulating metal-support interactions at the atomic level are essential for achieving highly efficient heterogeneous catalysts. Strong metal-support interaction (SMSI) not only stabilizes metal nanoparticles and improves their resistance to sintering but also modulates the electrical interaction between metal species and the support, optimizing the catalytic activity and selectivity. Therefore, understating the formation mechanism of SMSI and its dynamic evolution during the chemical reaction at the atomic scale is crucial for guiding the structural design and performance optimization of supported metal catalysts. Recent advancements in in-situ transmission electron microscopy (TEM) have shed new light on these complex phenomena, providing deeper insights into the SMSI dynamics. Here, the research progress of in-situ TEM investigation on SMSI in heterogeneous catalysis is systematically reviewed, focusing on the formation dynamics, structural evolution during the catalytic reactions, and regulation methods of SMSI. The significant advantages of in-situ TEM technologies for SMSI research are also highlighted. Moreover, the challenges and probable development paths of in-situ TEM studies on the SMSI are also provided.

RESUMEN

Multicomponent catalysts can be designed to synergistically combine reaction intermediates at interfacial active sites, but restructuring makes systematic control and understanding of such dynamics challenging. We here unveil how reducibility and mobility of indium oxide species in Ru-based catalysts crucially control the direct, selective conversion of CO2 to ethanol. When uncontrolled, reduced indium oxide species occupy the Ru surface, leading to deactivation. With the addition of steam as a mild oxidant and using porous polymer layers to control In mobility, Ru-In2O3 interface sites are stabilized, and ethanol can be produced with superior overall selectivity (70%, rest CO). Our work highlights how engineering of bifunctional active ensembles enables cooperativity and synergy at tailored interfaces, which unlocks unprecedented performance in heterogeneous catalysts.

RESUMEN

Chlorine evolution reaction (CER) is crucial for industrial-scale production of high-purity Cl2. Despite the development of classical dimensionally stable anodes to enhance CER efficiency, the competitive oxygen evolution reaction (OER) remains a barrier to achieving high Cl2 selectivity. Herein, a binder-free electrode, Ru nanoparticles (NPs)-decorated NiMoO4 nanorod arrays (NRAs) supported on Ti foam (Ru-NiMoO4/Ti), was designed for active CER in saturated NaCl solution (pH = 2). The Ru-NiMoO4/Ti electrode exhibits a low overpotential of 20 mV at 10 mA cm-2 current density, a high Cl2 selectivity exceeding 90%, and robust durability for 90h operation. The marked difference in Tafel slopes between CER and OER indicates the high Cl2 selectivity and superior reaction kinetics of Ru-NiMoO4/Ti electrode. Further studies reveal a strong metal-support interaction (SMSI) between Ru and NiMoO4, facilitating electron transfer through the Ru-O bridge bond and increasing the Ru 3d-Cl 2p antibonding orbital occupancy, which eventually results in weakened Ru-Cl bonding, promoted Cl desorption, and enhanced Cl2 evolution. Our findings provide new insights into developing electrodes with enhanced CER performance through antibonding orbital occupancy engineering.

RESUMEN

Strong metal-support interaction (SMSI) is crucial to modulating the nature of metal species, yet the SMSI behaviors of sub-nanometer metal clusters remain unknown due to the difficulties in constructing SMSI at cluster scale. Herein, we achieve the successful construction of the SMSI between Pt clusters and amorphous TiO2 nanosheets by vacuum annealing, which requires a relatively low temperature that avoids the aggregation of small clusters. In situ scanning transmission electron microscopy observation is employed to explore the SMSI behaviors, and the results reveal the dynamic rearrangement of Pt atoms upon annealing for the first time. The originally disordered Pt atoms become ordered as the crystallizing of the amorphous TiO2 support, forming an epitaxial interface between Pt and TiO2. Such a SMSI state can remain stable in oxidation environment even at 400 °C. Further investigations prove that the electron transfer from TiO2 to Pt occupies the Pt 5d orbitals, which is responsible for the disappeared CO adsorption ability of Pt/TiO2 after forming SMSI. This work not only opens a new avenue for constructing SMSI at cluster scale but also provides in-depth understanding on the unique SMSI behavior, which would stimulate the development of supported metal clusters for catalysis applications.

RESUMEN

A great deal of research has been carried out on the design of Pd-based catalysts in the direct synthesis of H2O2, mainly for the purpose of improving the H2O2 selectivity by weakening the activation energy on the Pd active site and thus inhibiting the dissociation of the O-O bonds in O2*, OOH*, and HOOH*. However, this often results in insufficient activation energy for the reaction between H2 and O2 on Pd, leading to difficulties in improving both the selectivity and productivity of H2O2 simultaneously. Based on this, this study reports an efficient catalyst composed of amine-functionalized SBA-15-supported Pd. The strong metal-support interaction not only makes the PdNPs highly dispersed with more Pd active sites but also improves the stability of the catalyst. The amine group modification increases the proportion of Pd0, further enhancing Pd activity and promoting the adsorption and conversion of H2 and O2 on Pd, thereby significantly increasing H2O2 productivity. Additionally, the density-functional theory simulation results showed that due to the hydrogen-bonding force between the amine group and H2O2, this particular anchoring effect would make the hydrogenation and decomposition of H2O2 effectively suppressed. Ultimately, both the selectivity and productivity of H2O2 are improved simultaneously.

RESUMEN

Platinum (Pt) supported on high surface area carbon has been the most widely used electrocatalyst in proton exchange membrane fuel cell (PEMFC). However, conventional carbon supports are susceptible to corrosion at high potentials, leading to severe degradation of electrochemical performance. In this work, titanium carbonitride embedded in mesoporous carbon nanofibers (m-TiCN NFs) are reported as a promising alternative to address this issue. Benefiting from the interpenetrating conductive pathways inside the one-dimensional (1D) nanostructures and the embedded TiCN nanoparticles (NPs), m-TiCN NFs exhibit excellent stability at high potentials and interact strongly with Pt NPs. Subsequently, m-TiCN NFs-supported Pt NPs deliver remarkably enhanced oxygen reduction reaction (ORR) activity and durability, with negligible activity decay and less than 5% loss of electrochemical surface area（ECSA） after 50 000 cycles. Moreover, the fuel cell assembled by this catalyst delivers a maximum power density of 1.22 W cm-2 and merely 3% loss after 30 000 cycles of accelerated durability tests under U.S. Department of Energy (DOE) protocols. The improved ORR activity and durability are attributed to the superior corrosion resistance of the m-TiCN NF support and the strong interaction between Pt and m-TiCN NFs.

RESUMEN

Supported metal catalysts are widely used for chemical conversion, in which construction of high density metal-oxide or oxide-metal interface is an important means to improve their reaction performance. Here, Cu@ZnOx encapsulation structure has been in situ constructed through gas-phase migration of Zn species from ZnO particles onto surface of Cu nanoparticles under CO2 hydrogenation atmosphere at 450 °C. The gas-phase deposition of Zn species onto the Cu surface and growth of ZnOx overlayer is self-limited under the high temperature and redox gas (CO2 /H2 ) conditions. Accordingly, high density ZnOx -Cu interface sites can be effectively tailored to have an enhanced activity in CO2 hydrogenation to methanol. This work reveals a new route for the construction of active oxide-metal interface and classic strong metal-support interaction state through gas-phase migration of support species induced by high temperature redox reaction atmosphere.

RESUMEN

The high density of surface active sites, high efficiency of interfacial carrier transport, and molecular diffusion path determine the efficiency of the electrochemical sensors. The ultrathin structures have atomic-level thickness, carrier migration and heat diffusion are limited in the two-dimensional plane, resulting in excellent conductivity and high carrier concentration. A one-step chemical method is applied to synthesize defect-rich Au-SnO2 in an ultrathin nanosheet form (thickness of 2-3 nm). The strong interaction between Au and SnO2 via the Au-O-Sn bonding and the catalytic effect of Au can prolong the service life via decreasing the optimal operating temperature (55 °C) and promote the Au-SnO2 sensor to exclusively detect formaldehyde at the ppb level (300 ppb). The experimental findings along with theoretical study reveal that Au nanoparticles have a different effect on the competitive adsorption and chemical reaction over the surface of the Au-SnO2 with formaldehyde and other interfering VOC gases, such as methanol, ethanol, and acetone. This study provides mechanistic insights into the correlation between operating temperature and the performance of the Au-SnO2 chemiresistive sensor. This work allows the development of highly efficient and stable electrochemical sensors to detect VOC gases at room temperature in the future.

Asunto(s)

RESUMEN

The availability of durable, high-performance electrocatalysts for the hydrogen oxidation reaction (HOR) is currently a constraint for anion-exchange membrane fuel cells (AEMFCs). Herein, a rapid microwave-assisted synthesis method is used to develop a core-shell catalyst support based on a hydrogenated TiO2 /carbon for PtRu nanoparticles (NPs). The hydrogenated TiO2 provides a strong metal-support interaction with the PtRu NPs, which improves the catalyst's oxophilicity and HOR activity compared to commercial PtRu/C and enables greater size control of the catalyst NPs. The as-synthesized PtRu/TiO2 /C-400 electrocatalyst exhibits respectable performance in an AEMFC operated at 80 °C, yielding the highest current density (up to 3× higher) within the catalytic region (compared at 0.80-0.90 V) and voltage efficiency (68%@ 0.5 A cm-2 ) values in the compared literature. In addition, the cell demonstrates promising short-term voltage stability with a minor voltage decay of 1.5 mV h-1 . This "first-of-its-kind in alkaline" work may open further research avenues to develop rapid synthesis methods to prepare advanced core-shell metal-oxide/carbon supports for electrocatalysts for use in the next-generation of AEMFCs with potential applicability to the broader electrochemical systems research community.

RESUMEN

The composites of transition metal-doped titania and carbon have emerged as promising supports for Pt electrocatalysts in PEM fuel cells. In these multifunctional supports, the oxide component stabilizes the Pt particles, while the dopant provides a co-catalytic function. Among other elements, Sn is a valuable additive. Stong metal-support interaction (SMSI), i.e., the migration of a partially reduced oxide species from the support to the surface of Pt during reductive treatment is a general feature of TiO2-supported Pt catalysts. In order to explore the influence of SMSI on the stability and performance of Pt/Ti0.8Sn0.2O2-C catalysts, the structural and catalytic properties of the as prepared samples measured using XRD, TEM, XPS and electrochemical investigations were compared to those obtained from catalysts reduced in hydrogen at elevated temperatures. According to the observations, the uniform oxide coverage of the carbon backbone facilitated the formation of Pt-oxide-C triple junctions at a high density. The electrocatalytic behavior of the as prepared catalysts was determined by the atomic closeness of Sn to Pt, while even a low temperature reductive treatment resulted in Sn-Pt alloying. The segregation of tin oxide on the surface of the alloy particles, a characteristic material transport process in Sn-Pt alloys after oxygen exposure, contributed to a better stability of the reduced catalysts.

RESUMEN

Stabilization of the Pt in N-doped carbon materials is an effective method to improve the performance of electrocatalytic methanol oxidation reaction (MOR). Nevertheless, the roles of different N configurations (pyridinic N, pyrrolic N, and graphitic N) toward the electrochemical performance of Pt-based catalysts remain unclear. Herein, Density Functional Theory calculations are adopted to elucidate the synergistic promotion of MOR by different N-configurations with Pt nanoparticles (NPs). Guided by the theoretical study, a series of MOR electrocatalysts with different ratios of pyridinic N and pyrrolic N (denoted as Pt/N-CNT-X (500, 600, 700, 800, and 900)) are designed and synthesized. Surprisingly, the electrocatalytic activity of Pt/N-CNT-600 with a suitable ratio of pyrrolic-N and pyridinic-N for MOR reaches 2394.7 mA mg-1 Pt and 5515.8 mA mg-1 Pt in acidic and alkaline media, respectively, which are superior to the Pt/CNTs, commercial Pt/C, and the ever-reported Pt-based electrocatalysts. The strong metal-support interaction induced by the N-doping is the crucial reason for the superior electrocatalytic performance. More importantly, the ability of pyrrolic-N and pyridinic-N in promoting the adsorption and oxidation of CH3 OH and the oxidation of CO* is substantiated for the first time in methanol oxidation. This work provides new insights on the design of efficient electrocatalysts for MOR.

RESUMEN

Adjusting the interaction between dual active components for enhancing volatile organic compounds (VOCs) degradation is an effective but still challenging means of air pollution control. Herein, a limited pyrolysis oxidation strategy was adopted to prepare Pd-Mn3O4 spinel catalysts with uniform morphology and active component dispersion. Among these, 1.08Pd-Mn3O4 presented the highest catalytic efficiency with a T90 value of 240 °C, which was 94 °C lower than that of Mn3O4. Characterization and density functional theory (DFT) calculation results revealed that the strong metal-support interaction (SMSI) effect between Pd and Mn3O4 promoted the redistribution of surface charges, thus strengthening the oxidation-reduction ability of the active sites. Moreover, the SMSI effect led to a better migration of surface oxygen species, and boosted the generation of active surface oxygen species. Simultaneously, the Pd catalyst further reduced the energy barrier in the initial stage of the dehydrogenation of propane. Overall, this study provided a novel design strategy for dual active components catalysts with SMSI effect and extended the application of these catalysts in the important field of VOCs elimination.

RESUMEN

A series of TiO2-supported Ru catalysts with different TiO2 crystalline phases was synthesized and employed for the hydrogenolysis of polyethylene (PE). CO chemisorption, high-angle annular dark-field-scanning transmission electron microscopy, temperature-programmed reduction, and CO-Fourier transform infrared spectroscopy suggested that the degree of strong metal-support interactions (SMSIs) varied depending on the type of the TiO2 phase and the reduction temperature, eventually influencing the catalysis of PE hydrogenolysis. Among the synthesized catalysts, Ru/TiO2 with the rutile phase (Ru/TiO2-R) exhibited the highest catalytic activity after high-temperature reduction at 500 °C, indicating that a certain degree of SMSI is necessary for ensuring high activity in PE hydrogenolysis. Ru/TiO2-R could be successfully employed for the hydrogenolysis of post-consumer plastic wastes such as LDPE bottles to produce valuable chemicals (liquid fuel and wax) in high yields of 74.7%. This work demonstrates the possibility of harnessing the SMSIs in the design and synthesis of active catalysts for PE hydrogenolysis.

Asunto(s)

RESUMEN

Inducing strong metal-support interaction (SMSI) has been a useful way to control the structure of surface active sites. The SMSI often causes the encapsulation of metal particles with an oxide layer. Herein, an amorphous ceria shell was formed on Cu nanoparticles under a mild gas condition with high activity and durability for surface reaction. Cu-Ce solid solution promoted the transfer of surface oxygen species, which induced the ceria shell formation on Cu nanoparticles. This catalyst was used for CO2 hydrogenation, selectively producing CO with high low-temperature activity and good durability for operation at high temperature. CO2 activation and H2 spillover could occur at low temperatures, enhancing the activity. The shell prevented the sintering, assuring durability. This catalyst was applied to a bench-scale reactor without loss in performance, resulting in high CO productivity in all temperature ranges.

RESUMEN

Lowering Pt loading in the catalyst while maintaining its superior catalytic efficiency during hydrogen evolution reaction (HER) is essential for the large-scale application of water splitting. The utilization of strong metal-support interaction (SMSI) through morphology engineering has emerged as an effective strategy in fabricating Pt-supported catalysts. However, a simple and explicit routine to realize the rational design of morphology-related SMSI remains challenging. Here we report a protocol for the photochemical deposition of Pt, which benefits from the intrinsic difference in absorption capability of TiO2 to establish proper Pt+ species and charge separation domains on the surface. With a comprehensive investigation of the surface environment through experiments and Density functional theory (DFT) calculations, charge transfer from Pt to Ti, the separation of electron-hole pairs, and the enhanced electron transfer in the TiO2 matrix were confirmed. It is reported that H2O molecules can be spontaneously dissociated by the surface Ti and O, generating OH stabilized by adjacent Ti and Pt. Such adsorbed OH group induces changes in the electron density of Pt, consequently favours the H adsorption and enhances the HER. Benefiting from the preferable electronic state, the annealed Pt@TiO2-pH9 (PTO-pH9@A) exhibits an overpotential of 30 mV to reach 10 mA cm-2 geo and a mass activity of 3954 A g-1Pt, which is 17-fold higher than the commercial Pt/C. Our work provides a new strategy for the high-efficient catalyst design by the surface state- regulated SMSI.

RESUMEN

Electrochemical CO2 reduction reaction (CO2RR), which uses renewable electricity to produce high-value-added chemicals, offers an alternative clean path to the carbon cycle. However, bismuth-based catalysts show great potential for the conversion of CO2 and water to formate, but their overall efficiency is still hampered by the weak CO2 adsorption, low electrical conductivity, and slow mass transfer of CO2 molecules. Herein, we report that a rationally modulated nitrogen-doped graphene aerogel matrix (NGA) can significantly enhance the CO2RR performance of bismuth nanoplates (BiNPs) by both modulating the electronic structure of bismuth and regulating the interface for chemical reaction and mass transfer environments. In particular, the NGA prepared by reducing graphene oxide (GO) with hydrazine hydrate (denoted as NGAhdrz) exhibits significantly enhanced strong metal-support interaction (SMSI), increased specific surface area, strengthened CO2 adsorption, and modulated wettability. As a result, the Bi/NGAhdrz exhibits significantly boosted CO2RR properties, with a Faradaic efficiency (FE) of 96.4% at a current density of 51.4 mA cm-2 for formate evolution at a potential of -1.0 V versus reversible hydrogen electrode (vs RHE) in aqueous solution under ambient conditions.