RESUMEN

Pathogenic bacteria are the main cause of bacterial infectious diseases, which have posed a grave threat to public health. Single-atom nanozymes have emerged as promising candidates for antibacterial applications, but their activities need to be further improved. Considering diatomic nanozymes exhibit superior metal loading capacities and enhanced catalytic performance, a new interlayer coupling diatomic nanozyme (IC-DAN) is constructed by modulating the coordination environment in an atomic-level engineering. It is well demonstrated that IC-DAN exhibited superior peroxidase-mimetic activity in the presence of H2O2 to yield abundant ∙OH and possessed high photothermal conversion ability, which synergistically achieves efficient antibacterial therapy. Therefore, IC-DAN shows great potential used as antibacterial agent in clinic and this study open a new route to developing high-performance artificial enzymes.

Asunto(s)

RESUMEN

Purpose: The search for effective and low-risk treatment methods for colorectal cancer (CRC) is a pressing concern, given the inherent risks and adverse reactions associated with traditional therapies. Photothermal therapy (PTT) has emerged as a promising approach for cancer treatment, offering advantages such as non-radiation, non-invasiveness, and targeted treatment. Consequently, the development of nanoparticles with high stability, biocompatibility, and photothermal effects has become a significant research focus within the field of PTT. Methods: In this study, TiO2-Ti3C2 nanocomposites were synthesized and characterized, and their photothermal conversion efficiency in the near-infrared region II (NIR-II) was determined. Then studied the in vivo and in vitro photothermal activity and anti-tumor effect of TiO2-Ti3C2 in human colorectal cancer cell lines and nude mice subcutaneous tumor model. Results: The results showed that TiO2-Ti3C2 nanocomposites have strong absorption ability in the NIR-II, and have high photothermal conversion efficiency under 1064 nm (0.5 W/cm2, 6 min) laser stimulation. In addition, in vitro experiments showed that TiO2-Ti3C2 nanocomposites significantly inhibited the invasion, migration, and proliferation of colorectal cancer cells, and induced cell apoptosis; in vivo, experiments showed that TiO2-Ti3C2 nanocomposites-mediated PTT had good biocompatibility and efficient targeted inhibition of tumor growth. Conclusion: In conclusion, TiO2-Ti3C2 nanocomposites can be used as NIR-II absorption materials in PTT to suppress the invasion, migration, and proliferation of colorectal cancer cells, induce colorectal cancer cell apoptosis, and thus inhibit the development of CRC. Therefore, TiO2-Ti3C2 nanocomposites can be used as potential anti-tumor drugs for photothermal ablation of colorectal cancer cells.

Asunto(s)

RESUMEN

The treatment of bone defects remains a substantial clinical challenge due to the lack of spatiotemporal management of the immune microenvironment, revascularization, and osteogenic differentiation. Herein, deferoxamine (DFO)-loaded black phosphorus nanosheets decorated by polydopamine layer are prepared (BPPD) and compounded into gelatin methacrylate/sodium alginate methacrylate (GA) hybrid hydrogel as a smart-responsive therapeutic system (GA/BPPD) for accelerated bone regeneration. The BPPD nanocomposites served as bioactive components and near-infrared (NIR) photothermal agents, which conferred the hydrogel with excellent NIR/pH dual-responsive properties, realizing the stimuli-responsive release of DFO and PO4 3 - during bone regeneration. Under the action of NIR-triggered mild photothermal therapy, the GA/BPPD hydrogel exhibited a positive effect on promoting osteogenesis and angiogenesis, eliminating excessive reactive oxygen species, and inducing macrophage polarization to the M2 phenotype. More significantly, through macrophage M2 polarization-induced osteoimmune microenvironment, this hydrogel platform could also drive functional cytokine secretion for enhanced angiogenesis and osteogenesis. In vivo experiments further demonstrated that the GA/BPPD system could facilitate bone healing by attenuating the local inflammatory response, increasing the secretion of pro-healing factors, stimulating endogenous cell recruitment, and accelerating revascularization. Collectively, the proposed intelligent photothermal hydrogel platform provides a promising strategy to reshape the damaged tissue microenvironment for augmented bone regeneration.

Asunto(s)

RESUMEN

Single-atom (SA) nanoparticles exhibit considerable potential in terms of photothermal properties for bactericidal applications. Nevertheless, the restricted efficacy of their targeted and controlled antibacterial activity has hindered their practical implementation. This study aims to overcome this obstacle by employing chemical modifications to tailor SAs, thereby achieving targeted and light-controlled antimicrobial effects. By conducting atomic-level modifications on palladium SAs using glutathione (GSH) and mercaptophenylboronic acid (MBA), their superior targeted binding capabilities toward Escherichia coli cells are demonstrated, surpassing those of SAs modified with cysteine (Cys). Moreover, these modified SAs effectively inhibit wound bacteria proliferation and promote wound healing in rats, without inducing noticeable toxicity to major organs under 808 nm laser irradiation. This study highlights the significance of chemical engineering in tailoring the antibacterial properties of SA nanoparticles, opening avenues for combating bacterial infections and advancing nanoparticle-based therapies.

Asunto(s)

RESUMEN

Driven by regulatory authorities and the ever-growing demands from industry, various artificial tissue models have been developed. Nevertheless, there is no model to date that is capable of mimicking the biomechanical properties of the skin whilst exhibiting the hydrophilicity/hydrophobicity properties of the skin layers. As a proof-of-concept study, tissue surrogates based on gel and silicone are fabricated for the evaluation of microneedle penetration, drug diffusion, photothermal activity, and ultrasound bioimaging. The silicone layer aims to imitate the stratum corneum while the gel layer aims to mimic the water-rich viable epidermis and dermis present in in vivo tissues. The diffusion of drugs across the tissue model is assessed, and the results reveal that the proposed tissue model shows similar behavior to a cancerous kidney. In place of typical in vitro aqueous solutions, this model can also be employed for evaluating the photoactivity of photothermal agents since the tissue model shows a similar heating profile to skin of mice when irradiated with near-infrared laser. In addition, the designed tissue model exhibits promising results for biomedical applications in optical coherence tomography and ultrasound imaging. Such a tissue model paves the way to reduce the use of animals testing in research whilst obviating ethical concerns.

Asunto(s)

RESUMEN

Bacterial infection is seriously threatening human health, and the design of high-efficiency and good biocompatibility antibacterial agents is an urgent problem to be solved. However, with the emergence of drug-resistant bacteria, the existing antibacterial agents have low killing efficiency, and the formation of biofilms has further weakened the therapeutic effect. Herein, we constructed an efficient antibacterial system mediated by near-infrared light for synergistic antibacterial and biofilm dissipation. Specifically, the ZnO/Ti3C2Tx with heterojunction was synthesized by hydrothermal growth of ZnO on the surface of lamellar Ti3C2Tx-MXene. The prepared ZnO/Ti3C2Tx had better photothermal ability than ZnO and Ti3C2Tx, respectively. The local thermal effect can not only destroy the integrity of the bacterial membrane but also promote the release of Zn2+ ions and further improve the antibacterial performance. ZnO/Ti3C2Tx achieved a 100% sterilization rate (better than either ZnO or Ti3C2Tx) at 150 µg mL-1. The biofilm dissipation experiment further proved its excellent biofilm ablation effect. More importantly, the results of in vitro cell culture and animal experiments have demonstrated its good biological safety. In summary, this new type of nanomaterial shows strong local chemical photothermal sterilization ability and has great potential to replace traditional antibacterial agents.

Asunto(s)

RESUMEN

Relevant properties of gold nanoparticles, such as stability and biocompatibility, together with their peculiar optical and electronic behavior, make them excellent candidates for medical and biological applications. This review describes the different approaches to the synthesis, surface modification, and characterization of gold nanoparticles (AuNPs) related to increasing their stability and available features useful for employment as drug delivery systems or in hyperthermia and photothermal therapy. The synthetic methods reported span from the well-known Turkevich synthesis, reduction with NaBH4 with or without citrate, seeding growth, ascorbic acid-based, green synthesis, and Brust-Schiffrin methods. Furthermore, the nanosized functionalization of the AuNP surface brought about the formation of self-assembled monolayers through the employment of polymer coatings as capping agents covalently bonded to the nanoparticles. The most common chemical-physical characterization techniques to determine the size, shape and surface coverage of AuNPs are described underlining the structure-activity correlation in the frame of their applications in the biomedical and biotechnology sectors.

Asunto(s)

RESUMEN

OBJECTIVE: This paper introduces a simple one-step and ultra-fast method for synthesis of highly photothermally active polypyrrole-coated gold nanoparticles. The synthesis process is so simple that the reaction is very fast without the need for any additives or complicated steps. METHODOLOGY: Polypyrrole-coated gold nanoparticles (AuPpy NPs) were synthesized by reacting chloroauric acid (HAuCl4) with pyrrole (monomer) in aqueous medium at room temperature. These nanoparticles were characterized by UV-visible-NIR spectrometry, transmission electron microscopy (TEM), AC conductivity, zeta sizer and were evaluated for dark cytotoxicity and photocytotoxicity using human hepatocellular carcinoma (HepG2) cell line as a model for cancer cells. RESULTS: The synthesized AuPpy NPs showed a peak characteristic for gold nanoparticles (530-600 nm, molar ratio dependent) and a wide absorption band along the visible-NIR region with intensity about triple or even quadruple that of polypyrrole synthesized by the conventional FeCl3 method at the same concentration and under the same conditions. TEM imaging showed that the synthesized AuPpy NPs were composed of spherical or semi-spherical gold core(s) of about 4-10 nm coated with distinct layer(s) of polypyrrole seen either loosely or in clusters. Mean sizes of the synthesized nanoparticles range between ~25 and 220 nm (molar ratio dependent). Zeta potentials of the AuPpy NPs preparations indicate their good colloidal stability. AC conductivity values of AuPpy NPs highly surpass that of Ppy prepared by the conventional FeCl3 method. AuPpy NPs were non-toxic even at high concentrations (up to 1000 µM pyrrole monomer equivalent) under dark conditions. Unlikely, light activated the photothermal activity of AuPpy NPs in a dose-dependent manner. CONCLUSION: This method simply and successfully synthesized AuPpy NPs nanoparticles that represent a safe alternative photothermally active multifunctional tool instead of highly toxic and non-biodegradable gold nanorods.

Asunto(s)

RESUMEN

Black phosphorus (BP) as a layered two-dimensional (2D) semiconductor material with a tunable band gap has attracted growing attention for promising applications in diverse fields including biotechnology owing to its excellent physical and chemical properties. In this study, BP crystals were synthesized using a chemical vapor transport method and exfoliated into BP nanosheets in deoxygenated water or hexane. Next, monodisperse Au nanoparticles that were synthesized using a surfactant-assisted chemical reduction method were assembled on exfoliated BP nanosheets hexane to yield BP/Au nanocomposites. The photothermal antibacterial and antibiofilm activities of BP nanosheets and BP/Au nanocomposites were investigated against Enterococcus faecalis, a pathogenic biofilm-forming bacterium, by studying the photothermal effect and bacterial growth curve and using colony counting and live/dead fluorescence staining methods under near-infrared (NIR) light irradiation. Thanks to the higher photothermal conversion efficiency of BP/Au nanocomposites than that of bare BP nanosheets under NIR light irradiation, they destructed the bacterial cell membrane more efficiently than bare BP with the biofilm inhibition rate of 58%. It should be noted that this is the first study on the antibacterial and antibiofilm activity of BP/Au nanocomposites via a photothermal process under NIR light irradiation. This work shows the potential of BP/Au nanocomposites in fighting against pathogenic bacteria and paves the way for the exploration of antibacterial platforms based on the biocompatible 2D semiconductor BP.

Asunto(s)

RESUMEN

In this report, copper oxide nanoparticles (TA-CuO NPs) were synthesized using cell-free extract of Trichoderma asperellum and assessed their photothermal induced anticancerous activity. The fungal mediated TA-CuO NPs was confirmed by the surface plasmon resonance at 285-295 nm. The amide (CO) and aromatic (CC) groups in secondary metabolites of the extract was found to be an encapsulating or reducing agents for TA-CuO NPs, as indicated by IR spectra. Crystalline nature by cubic face-centered structure of the TA-CuO NPs was confirmed by XRD and their size ranges from 10 to 190 nm and an average of 110 nm by particle size analyzer (PSA). The Ultra HRSEM study revealed spherical shaped TA-CuO NPs. The FETEM results were also in strong agreement with PSA and UHR SEM. The survey-scan spectrum of XPS indicated the presence of C1s (47.83%), Cu2p (16.11%), Na1s (2.2%) and O1s (33.86%). The cell death was significantly found higher in photothermal induced by near-infrared laser (TA-CuO NPs-NIR) treated than that of TA-CuO NPs treatment. The level of ROS (35.62%) was higher in the treated cells than that of the untreated control, in accordance with the nucleus damage and losses in the mitochondrial membrane potential (ΔΨm). The upregulation of Bcl-2 in the untreated cells and Cas-3 in TA-CuO NPs-NIR treated cells was confirmed by western blot analysis. This work agreed with the potential biogenic TA-CuO NPs for promising in vitro photothermolysis of cancer cells, for the development of anticancer nanotherapeutics.

Asunto(s)

RESUMEN

Gold (Au) agglomerates (AGs) are reassembled using Triton X-100 (T) and doxorubicin (D) dissolved in ethanol under 185 nm photoirradiation to form TAuD nanovesicles (NVs) under ambient gas flow conditions. The positively charged Au particles are then electrostatically conjugated with the anionic chains of TD components via a flowing drop (FD) reaction. Photoirradiation of the droplets in a tubular reactor continues the photophysicochemical reactions, resulting in the reassembly of Au AGs and TD into TAuD NVs. The fabricated NVs are electrostatically collected onto a polished aluminum rod in a single-pass configuration. The dispersion of NVs is employed for bioassays to confirm uptake by cells and accumulation in tumors. The chemo-photothermal activity is determined both in vitro and in vivo. Different combinations of components are also used to fabricate NVs using the FD reaction, and these NVs are suitable for gene delivery as well. This newly designed gaseous single-pass process results in the reassembly of Au AGs for incorporation with TD without the need of batch wet chemical reactions, modifications, separations, or purifications. Thus, this process offers an efficient platform for preparing biofunctional Au nanostructures that requires neither complex physicochemical steps nor special storage techniques.

RESUMEN

A core-shell gold (Au) nanoparticle with improved photosensitization have been successfully fabricated using Au nanoparticles and 5,10,15,20 tetrakis pentafluorophenyl)-21H,23H-porphine (PF6) dye, forming a dyad through molecular self-assembly. Au nanoparticles were decorated on the shell and PF6 was placed in the core of the nanoparticles. Highly stable Au nanoparticles were achieved using PF6 with poly(N-vinylcaprolactam-co-N-vinylimidazole)-g-poly(D,L-lactide) graft copolymer hybridization. This was compared with hybridization using cetyltrimethylammonium bromide and polyethylene glycol-b-poly(D,L-lactide) for shell formation with PF6-Au. The resulting PF6-poly(N-vinylcaprolactam-co-N-vinylimidazole)-g-poly(D,L-lactide)-Au core-shell nanoparticle were utilized for photothermal and photodynamic activities. The spectroscopic analysis and zeta potential values of micelles revealed the presence of a thin Au layer coated on the PF6 nanoparticle surface, which generally enhanced the thermal stability of the gold nanoparticles and the photothermal effect of the shell. The core-shell PF6-Au nanoparticles were avidly taken up by cells and demonstrated cellular phototoxicity upon irradiation with 300W halogen lamps. The structural arrangement of PF6 dyes in the core-shell particles assures the effectiveness of singlet oxygen production. The study verifies that PF6 particles when companied with Au nanoparticles as PF6-Au have possible combinational applications in photodynamic and photothermal therapies for cancer cells because of their high production of singlet oxygen and heat.

Asunto(s)

RESUMEN

Nanotechnology has revolutionized the approach to different fields of industry and medicine. Among the new nanomaterial used, one of the most promising appears to be graphene. Its versatility, due to a particular chemical configuration, confers to it enormous potential of application. Graphene has recently been tested also in biomedical research with excellent results. Neurosurgery can benefit of this material for therapeutic purposes such as targeting controlled drug/gene delivery in brain tumor treatment, as well as photothermal and photodynamic cancer therapy, improving biosensing and bioimaging, and lastly as biocompatible material for intracranial and/or spinal devices. However, it still remains an experimental material whose in vitro and in vivo toxicity is tested with controversial results for the human health. Noteworthy is the fact that it is not possible so far to know its long-term toxicity.

Asunto(s)