RESUMEN

The thermal-coupled levels (TCLs) of lanthanides have attracted great attention in the field of optical thermometer, offering an efficient method to achieve non-contect temperatuer feedback in complex environment. However, the iner 4f electrons are shielded, which becomes the core obstacle in improving the sensing performance. This issue is now circumvented by constructing an electron transfer pathway between Tm3+(1D2) and Eu3+(5D0) configurations. As a result, the electron transfer barrier is related to the relative temperature sensitivity, giving an insight into the modulation mechanism. Compared to the conventional TCLs systems, the relative temperature sensitivity of this strategy is highly concentration-responsive, increasing from 5.56 to 10.1 % K-1 as the Eu3+ molar concentration rises from 0.3 to 0.5 mol%. This work reveals the inner emission mechanism based on IVCT-supported emission mode, and presents the highly adjustability of sensing performance.

RESUMEN

Low fluorescence under visible light excitation and catalytic activity limit many applications of graphene quantum dots in optical detection, biosensing, catalysis and biomedical. The paper reports design and synthesis of histidine, serine and folic acid-functionalized and boron and iron-doped graphene quantum dot (Fe/B-GQD-HSF). The Fe/B-GQD-HSF shows excellent fluorescence behavior and peroxidase-like activity. Excitation of 330 nm ultraviolet light produces the strongest blue fluorescence and excitation of 480 nm visible light produces the strongest yellow fluorescence. The specific activity reaches 92.67 U g-1, which is higher than that of other graphene quantum dots. The Fe/B-GQD-HSF can catalyze oxidation of 3,3',5,5'-tetramethylbenzidine with H2O2 to form blue compound. Based on this, it was used for colorimetric and fluorescence detection of H2O2. The absorbance at 652 nm linearly increases with the increase of H2O2 concentration between 0.5 and 100 µM with detection limit of 0.43 µM. The fluorescence signal linearly decreases with the increase of H2O2 concentration between 0.05 and 100 µM with detection limit of 0.035 µM. The analytical method has been satisfactorily applied in detection of H2O2 in food. The study also paves one way for design and synthesis of functional graphene quantum dots with ideal fluorescence behavior and catalytic activity.

Asunto(s)

Boro , Colorimetría , Ácido Fólico , Grafito , Histidina , Peróxido de Hidrógeno , Hierro , Puntos Cuánticos , Serina , Puntos Cuánticos/química , Grafito/química , Peróxido de Hidrógeno/análisis , Peróxido de Hidrógeno/química , Colorimetría/métodos , Ácido Fólico/análisis , Ácido Fólico/química , Hierro/análisis , Hierro/química , Boro/química , Histidina/análisis , Histidina/química , Serina/análisis , Serina/química , Espectrometría de Fluorescencia/métodos , Límite de Detección , Análisis de los Alimentos/métodos , Peroxidasa/química , Peroxidasa/metabolismo , Catálisis

RESUMEN

A series of x%Ho3+, 5 %Tm3+, y%Yb3+:Bi2WO6 (x = 0, 0.5, 1, 3, 5; y = 0.5, 1, 3) luminescent materials was prepared using a high-temperature solid-phase method. The microstructure, up-conversion luminescence, and temperature sensing properties of the synthesized powders were analyzed. X-ray diffraction patterns revealed that doping with Ho3+, Tm3+, and Yb3+ ions at certain concentrations did not affect the orthorhombic crystal structure of the Bi2WO6 host. Scanning electron microscopy revealed that the morphology of the sample consisted of lumpy particles with a particle size range of 1-5 µm and agglomeration. SEM mapping and energy-dispersive X-ray spectroscopy analyses revealed that each element was relatively uniformly distributed on the particle surface. Under 980 nm excitation (380 mW), the strongest luminescence of the sample was obtained when both Ho3+ and Yb3+ doping concentrations were 1 %. Compared with the luminescence of the 5 %Tm3+ and 1 %Yb3+:Bi2WO6 sample, with increasing Ho3+ concentrations, the luminescence intensity of Tm3+ was first enhanced and subsequently weakened, whereas the luminescence of Ho3+ was significantly weakened, which indicates the positive energy transfer from Ho3+ â†’ Tm3+. At 980 nm (80-380 mW), for the 1 %Ho3+, 5 %Tm3+, and 1 %Yb3+:Bi2WO6 sample, the 538 nm, 545 nm, 660 nm, and 804 nm emission peaks originated from the two-photon absorption. FIR660 nm/804 nm, FIR545 nm/804 nm, and FIR538 nm/804 nm were used to characterize the temperature and corresponded to temperature sensitivities Sr of 0.0046 K-1, 0.022 K-1 and 0.024 K-1 at 573 K, respectively. At 498 K, the minimum temperature resolution δT values were 0.03384 K, 0.03203 K and 0.04373 K. When the temperature increased from 298 K to 573 K, the powder sample luminescence gradually shifted from the yellow-green region to the red region. The results of environmental discoloration and thermochromic performance tests indicate that this sample has potential application in optical anti-counterfeiting. FIR804 nm /660 nm and FIR804 nm /538 nm were obtained for the 40 NTU turbidity suspension under identical excitation conditions. At 298 K, for the 40 NTU turbidity sample, the maximum Sr values were 0.0197 K-1 and 0.0405 K-1; at 340 K, the minimum temperature resolutions δT values were 0.54037 K and 0.66237 K. When the temperature decreased from 340 K to 298 K, the luminescence of the 40 NTU suspension samples gradually shifted from the yellow region to the green region.

RESUMEN

The pathological mechanisms of cataract remain largely unknown due to the lack of appropriate in vitro cellular models. We developed a stable in vitro system, namely, a "fried egg" differentiation method to generate functional lentoid bodies (LBs) from induced pluripotent stem cells (iPSCs). The iPSCs-derived LBs exhibited crystalline lens-like morphology and a transparent structure, and expressed lens-specific markers. TEM examination and optical analysis further demonstrated that it has the same cell arrangement structure and magnifying ability as lens.

Asunto(s)

Diferenciación Celular , Células Madre Pluripotentes Inducidas , Cristalino , Células Madre Pluripotentes Inducidas/citología , Células Madre Pluripotentes Inducidas/metabolismo , Humanos , Cristalino/citología , Cristalino/metabolismo , Técnicas de Cultivo de Célula/métodos , Células Cultivadas , Catarata/patología

RESUMEN

High-quality imaging of the retina is crucial to the diagnosis and monitoring of disease, as well as for evaluating the success of therapeutics in human patients and in preclinical animal models. Here, we describe the basic principles and methods for in vivo retinal imaging in rodents, including fundus imaging, fluorescein angiography, optical coherence tomography, fundus autofluorescence, and infrared imaging. After providing a concise overview of each method and detailing the retinal diseases and conditions that can be visualized through them, we will proceed to discuss the advantages and disadvantages of each approach. These protocols will facilitate the acquisition of optimal images for subsequent quantification and analysis. Additionally, a brief explanation will be given regarding the potential results and the clinical significance of the detected abnormalities.

Asunto(s)

Modelos Animales de Enfermedad , Angiografía con Fluoresceína , Retina , Enfermedades de la Retina , Tomografía de Coherencia Óptica , Animales , Tomografía de Coherencia Óptica/métodos , Enfermedades de la Retina/diagnóstico por imagen , Enfermedades de la Retina/patología , Enfermedades de la Retina/diagnóstico , Retina/diagnóstico por imagen , Retina/patología , Angiografía con Fluoresceína/métodos , Ratones , Ratas , Roedores , Imagen Óptica/métodos , Humanos , Fondo de Ojo

RESUMEN

Raman Optical Activity combined with Circularly Polarized Luminescence (ROA-CPL) was used in the spectral recognition of glutathione peptide (GSH) and its model post-translational modifications (PTMs). We demonstrate the potential of ROA spectroscopy and CPL probes (EuCl3, Na3[Eu(DPA)3], NaEuEDTA) in the study of unmodified peptide, i.e. GSH, and its derivatives, i.e. glutathione oxidized (GSSG), S-acetylglutathione (GSAc) and S-nitrosoglutathione (GSNO). ROA spectral features of GSH, GSSG, and GSAc were determined along with thier changes upon the different pH conditions. Apart from the ROA, induced CPL signals of Eu(III) probes also proved to be sensitive to the structural modifications of GSH-based model PTMs, enabling their spectral recognition, especially by the NaEuEDTA probe.

Asunto(s)

Glutatión , Espectrometría Raman , Glutatión/química , Luminiscencia , Mediciones Luminiscentes , Procesamiento Proteico-Postraduccional , Concentración de Iones de Hidrógeno

RESUMEN

Injuries of the respiratory system caused by viral infections (e.g., by influenza virus, respiratory syncytial virus, metapneumovirus, or coronavirus) can lead to long-term complications or even life-threatening conditions. The challenges of treatment of such diseases have become particularly pronounced during the recent pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). One promising drug is the anti-fibrinolytic and anti-inflammatory protease inhibitor aprotinin, which has demonstrated considerable inhibition of the replication of some viruses. Encapsulation of aprotinin in liposomes can significantly improve the effectiveness of the drug, however, the use of nanoparticles as carriers of aprotinin can radically change its biodistribution in the body. Here we show that the liposomal form of aprotinin accumulates more efficiently in the lungs, heart, and kidneys than the molecular form by side-by-side comparison of the ex vivo biodistribution of these two fluorescently labeled formulations in mice using bioimaging. In particular, we synthesized liposomes of different compositions and studied their accumulation in various organs and tissues. Direct comparison of the biodistributions of liposomal and free aprotinin showed that liposomes accumulated in the lungs 1.82 times more effectively, and in the heart and kidneys - 3.56 and 2.00 times, respectively. This suggests that the liposomal formulation exhibits a longer residence time in the target organ and, thus, has the potential for a longer therapeutic effect. The results reveal the great potential of the aprotinin-loaded liposomes for the treatment of respiratory system injuries and heart- and kidney-related complications of viral infections.

RESUMEN

The heterogeneity, non-uniform nature, and ethical concerns in sourcing biological tissues pose several challenges to designing, calibrating, standardizing, and evaluating the performance of spectroscopy-based diagnostic methods. A synthetic phantom module that can resemble a multi-layered tissue structure while including multiple tissue biomarkers with long-shelf life and stability is vital to overcome these challenges. This work uses a multi-layered silicone phantom to incorporate multiple biomarkers suitable for multi-modal spectroscopy testing and calibration. The phantom mimics the microcalcification distribution in the breast tissues using hydroxyapatite and the endogenous fluorescence seen in the tissues using Flavin Adenine Dinucleotide (FAD) and Nicotinamide Adenine Dinucleotide (NADH). The utility of this phantom for tumor margin analysis is analyzed using Diffuse reflectance, fluorescence, and Raman spectroscopy. The observed relative differences in intensity with changes in the silicone tumor layer depth and thickness are suitable for instrument calibration and fiber-optic probe design for tumor margin analysis. .

RESUMEN

The mechanical properties of the sclera play a critical role in supporting the ocular structure and maintaining its shape. However, non-invasive measurements to quantify scleral biomechanics remain challenging. Recently introduced multi-directional optical coherence elastography (OCE) combined with an air-coupled ultrasound transducer for excitation of elastic surface waves was used to estimate phase speed and shear modulus in ex vivo rabbit globes (n = 7). The scleral phase speed (12.1 ± 3.2 m/s) was directional-dependent and higher than for corneal tissue (5.9 ± 1.4 m/s). In the tested locations, the sclera proved to be more anisotropic than the cornea by a factor of 11 in the maximum of modified planar anisotropy coefficient. The scleral shear moduli, estimated using a modified Rayleigh-Lamb wave model, showed significantly higher values in the circumferential direction (65.4 ± 31.9 kPa) than in meridional (22.5 ± 7.2 kPa); and in the anterior zone (27.3 ± 9.3 kPa) than in the posterior zone (17.8 ± 7.4 kPa). The multi-directional scanning approach allowed both quantification and radial mapping of estimated parameters within a single measurement. The results indicate that multi-directional OCE provides a valuable non-invasive assessment of scleral tissue properties that may be useful in the development of improved ocular models, the evaluation of potential myopia treatment strategies, and disease characterization and monitoring.

Asunto(s)

Diagnóstico por Imagen de Elasticidad , Esclerótica , Tomografía de Coherencia Óptica , Animales , Conejos , Esclerótica/diagnóstico por imagen , Esclerótica/fisiología , Diagnóstico por Imagen de Elasticidad/métodos , Tomografía de Coherencia Óptica/métodos , Fenómenos Biomecánicos , Córnea/diagnóstico por imagen , Córnea/fisiología , Módulo de Elasticidad

RESUMEN

PURPOSE: To investigate the healing process of conjunctival autografts (CAG) following pterygium surgery using optical coherence tomography angiography (OCTA). METHODS: Twenty-one eyes of 21 patients diagnosed with pterygium underwent pterygium excision with CAG without using Mitomycin-C. Over a 12-week follow-up period, changes in vascular density (VD), vascular density index (VDI), and vascular length density (VLD) were assessed at two distinct depths: superficial (<200 µm) and deep (>200 µm) using OCTA. Additionally, the revascularization rate and pattern were evaluated. RESULTS: During the first week, the CAG was edematous and no sign of neovascularization was observed. In 4th week edema decreased and early signs of vascular formation appeared. In the 12th week, the deep vasculature demonstrated a greater density of interconnectivity compared to the superficial layers. VD and VLD significantly increased during the follow-up period (P < 0.05). The CAG blood flow signals exhibited a chaotic pattern, deviating from the expected centrifugal vascular pattern in the surrounding normal conjunctiva. CONCLUSION: OCTA imaging emerges as a reliable tool for the assessment of CAG vascularization, improving the monitoring of the healing process in the postoperative period. The evaluation of CAG revascularization patterns appears to be promising biomarkers that can predict the potential future recurrence.

RESUMEN

BACKGROUND: To quantify conjunctival microvascular characteristics obtained by optical coherence tomographic angiography (OCTA) and investigate their relationship with the presence and severity of coronary artery disease (CAD). METHODS: This cross-sectional study included 103 consecutive CAD patients confirmed by coronary angiography and 125 non-CAD controls. The temporal conjunctivas along the limbus of each participant were scanned using OCTA. Quantification of conjunctival microvasculature was performed by AngioTool software. The severity of the disease was evaluated using SYNTAX and Gensini scores. RESULTS: Compared to the controls, the CAD group exhibited significantly lower vessel area density (30.22 ± 3.34 vs. 26.70 ± 4.43 %, p < 0.001), lower vessel length density (6.39 ± 0.77 vs. 5.71 ± 0.89/m, p < 0.001), lower junction density (3.44 ± 0.56 vs. 3.05 ± 0.63/m, p < 0.001), and higher lacunarity (0.11 ± 0.03 vs. 0.14 ± 0.05, p < 0.001). Among all participants, lower vessel area density, lower vessel length density, lower junction density, and higher lacunarity were associated with greater odds of having CAD; the adjusted ORs (95 % confidence intervals) per one SD decrease were 2.71 (1.71, 4.29), 2.51(1.61, 3.90), 2.06 (1.39, 3.05), and 0.36 (0.23, 0.58), respectively. Among CAD patients, junction density was negatively associated with the Gensini score (r = -0.359, p = 0.037) and the Syntax score (r = -0.350, p = 0.042) in women but not in men (p > 0.05). CONCLUSIONS: Conjunctival microvascular characteristics were significantly associated with the presence of CAD. Junction density significantly associated with the severity of CAD among women patients.

RESUMEN

BACKGROUND AND AIMS: Recurrent events after myocardial infarction (MI) are common and often originate from native non-culprit (NC) lesions that are non-flow limiting. These lesions consequently pose as targets to improve long-term outcome. It is, however, largely unknown whether these lesions differ between sexes. The aim of this study was to assess such potential differences. METHODS: From the PECTUS-obs study, we assessed sex-related differences in plaque characteristics of fractional flow reserve (FFR)-negative intermediate NC lesions in 420 MI-patients. RESULTS: Among the included patients, 80 (19.1 %) were female and 340 (80.9 %) male. Women were older and more frequently had hypertension and diabetes. In total, 494 NC lesions were analyzed. After adjustment for clinical characteristics and accounting for within-patients clustering, lesion length was longer in female patients (20.8 ± 10.0 vs 18.3 ± 8.5 mm, p = 0.048) and minimum lumen area (2.30 ± 1.42 vs 2.78 ± 1.54 mm2, p < 0.001) and minimum lumen diameter (1.39 ± 0.45 vs 1.54 ± 0.44 mm, p < 0.001) were smaller. The minimum fibrous cap thickness was smaller among females (96 ± 53 vs 112 ± 72 µm, p = 0.025), with more lesions harboring a thin cap fibroatheroma (39.3 % vs 24.9 %, p < 0.001). Major adverse cardiovascular events at two years occurred in 6.3 % of female patients and 11.8 % of male patients (p = 0.15). CONCLUSIONS: FFR-negative NC lesions after MI harbored more high-risk plaque features in female patients. Although this did not translate into an excess of recurrent events in female patients in this modestly sized cohort, it remains to be investigated whether this difference affects clinical outcome.

RESUMEN

Studying the changes in organic matter and characteristic pollutants during the treatment of penicillin-containing pharmaceutical wastewater, which can be reflected by changes in dissolved organic matter (DOM), is crucial for improving the effectiveness of wastewater treatment units and systems. Herein, water quality indicators, spectroscopic methods, and Fourier-transform ion cyclotron resonance mass spectrometry were utilized to characterize the general molecular compositions and specific molecular changes in DOM during the treatment of typical penicillin-containing pharmaceutical wastewater, including in each of the influent, physicochemical treatment, biological treatment, oxidation treatment, and effluent stages. The influent exhibited a high organic matter content (concentration of dissolved organic carbon >10,000 mg·L-1), its DOM mainly contained protein- and lignin-like substances composed of CHON and CHONS molecules, and the relative intensity (RI) of penicillin was extremely high (RI = 0.220). Compared with the influent, the abundance of CHON and CHONS molecules detected after physicochemical treatment decreased by 70.3 % and 62.5 %, respectively, and the RI of penicillin decreased by 85.5 %. Biological treatment caused substantial changes in DOM components through oxidation, dealkylation, and denitrification reactions, accounting for 36.8 %, 28.9 %, and 14.8 % of the total identified reactions, respectively. Additionally, lignin-like substances were generated in large quantities, the overall humification level significantly increased, and the RI value increased for the penicillin intermediate, 6-aminopenicillanic acid (6-APA). Oxidation treatment effectively removed phosphorus-containing substances and some lignin-like substances produced by biological treatment; however, it was not effective in removing characteristic pollutants such as 6-APA. Such characteristic substances continued to be present in the effluent, and the DOM mainly contained protein- and humus-like substances, accounting for 30.8 % and 47.3 %, respectively. The study findings reveal the changes in organic matter and characteristic pollutants during the treatment of penicillin-containing wastewater from the perspective of the general molecular composition and specific molecular changes in DOM, providing support for further exploration of wastewater treatment mechanisms and improvements in treatment unit efficiency.

RESUMEN

Addressing the need for accessible SARS-CoV-2 testing, carboxy-PEG 12-thiol functionalized gold nanoparticles conjugates were developed for rapid point-of-care (POC) detection against SARS-CoV-2 spike protein, pseudo-SARS-CoV-2, and authentic Beta SARS-CoV-2 virus particles. These conjugates leverage gold nanoparticles (AuNPs) as signal transducers, cross-linked to either angiotensin-converting enzyme 2 (ACE2) or SARS-CoV-2 spike protein receptor-binding domain (RBD) antibodies as bioreceptors and showed a distinct color shift from pink to blue. To assess their POC feasibility, the conjugates were integrated into facemasks and breathalyzers, wherein aerosolized SARS-CoV-2 antigens were successfully detected, producing a color change within 10 and 30 minutes for the breathalyzer and facemask prototypes, respectively. Furthermore, we explored quantitative analysis using varying concentrations of SARS-CoV-2 spike protein. Both conjugates demonstrated a linear relationship between blue color intensity and virus concentration, with linear ranges of 0.08-0.6 ng/mL and 0.04-0.5 ng/mL, respectively. Low limits of detection and quantification were also achieved. They exhibited specificity, responding solely to SARS-CoV-2 even in complex matrices containing diverse proteins, including the SARS-CoV-1 spike protein. Precision tests yielded coefficient of variations below 2 %, showcasing their remarkable reproducibility. This work presents a promising approach for rapid, sensitive, and specific POC detection of SARS-CoV-2 paving the way for improved pandemic response and management.

RESUMEN

Integrating light emitters based on III-V materials with silicon-based electronics is crucial for further increase in data transfer rates in communication systems since the indirect bandgap of silicon prevents its direct use as a light source. We investigate here InAs/InGaAlAs quantum dot (QD) structures grown directly on 5° off-cut Si substrate and emitting light at 1.5 µm, compatible with established telecom platform. Using different dislocation defect filtering layers, exploiting strained superlattices, and supplementary QD layers, we mitigate the effects of lattice constant and thermal expansion mismatches between III-V materials and Si during growth. Complementary optical spectroscopy techniques, i.e. photoreflectance and temperature-, time- and polarization-resolved photoluminescence, allow us to determine the optical quality and application potential of the obtained structures by comparing them to a reference sample-state-of-the-art QDs grown on InP. Experimental findings are supported by calculations of excitonic states and optical transitions by combining multiband k•p and configuration-interaction methods. We show that our design of structures prevents the generation of a considerable density of defects, as intended. The emission of Si-based structures appears to be much broader than for the reference dots, due to the creation of different QD populations which might be a disadvantage in particular laser applications, however, could be favorable for others, e.g., in broadly tunable devices, sensors, or optical amplifiers. Eventually, we identify the overall most promising combination of defect filtering layers and discuss its advantages and limitations and prospects for further improvements.

RESUMEN

Human primary visual cortex (V1) responds more strongly, or resonates, when exposed to ∼10, ∼15-20, and ∼40-50 Hz rhythmic flickering light. Full-field flicker also evokes the perception of hallucinatory geometric patterns, which mathematical models explain as standing-wave formations emerging from periodic forcing at resonant frequencies of the simulated neural network. However, empirical evidence for such flicker-induced standing waves in the visual cortex was missing. We recorded cortical responses to flicker in awake mice using high-spatial-resolution widefield imaging in combination with high-temporal-resolution glutamate-sensing fluorescent reporter (iGluSnFR). The temporal frequency tuning curves in the mouse V1 were similar to those observed in humans, showing a banded structure with multiple resonance peaks (8, 15, and 33 Hz). Spatially, all flicker frequencies evoked responses in V1 corresponding to retinotopic stimulus location, but some evoked additional peaks. These flicker-induced cortical patterns displayed standing-wave characteristics and matched linear wave equation solutions in an area restricted to the visual cortex. Taken together, the interaction of periodic traveling waves with cortical area boundaries leads to spatiotemporal activity patterns that may affect perception.

RESUMEN

Resolving the position of roots in the whole-plant hierarchy of drought-induced xylem embolism resistance is fundamental for predicting when species become isolated from soil water resources. Published research generally suggests that roots are the most vulnerable organ of the plant vascular system, although estimates vary significantly. However, our knowledge of root embolism excludes the fine roots (< 2 mm diameter) that form the bulk of total absorptive surface area of the root network for water and nutrient uptake. We measured fine root and stem xylem vulnerability in 10 vascular plant species from the major land plant clades (five angiosperms, three conifers, a fern and lycophyte), using standardised in situ methods (Optical Methods and MicroCT). Mean fine root embolism resistance across the network matched or exceeded stems in all study species. In six of these species (one fern, one lycophyte, three conifers and one angiosperm), fine roots were significantly more embolism resistant than stems. No clear relationship was found between root xylem conduit diameter and vulnerability. These results provide insight into the resistance of the plant hydraulic pathway at the site of water and nutrient uptake, and challenge the long-standing assumption that fine roots are more vulnerable than stems.

RESUMEN

For automated quayside container cranes, accurate measurement of the three-dimensional positioning and attitude of the container spreader is crucial for the safe and efficient transfer of containers. This paper proposes a high-precision measurement method for the spreader's three-dimensional position and rotational angles based on a single vertically mounted fixed-focus visual camera. Firstly, an image preprocessing method is proposed for complex port environments. The improved YOLOv5 network, enhanced with an attention mechanism, increases the detection accuracy of the spreader's keypoints and the container lock holes. Combined with image morphological processing methods, the three-dimensional position and rotational angle changes of the spreader are measured. Compared to traditional detection methods, the single-camera-based method for three-dimensional positioning and attitude measurement of the spreader employed in this paper achieves higher detection accuracy for spreader keypoints and lock holes in experiments and improves the operational speed of single operations in actual tests, making it a feasible measurement approach.

RESUMEN

Bismuth germanate (Bi4Ge3O12, BGO) is a widely used optical sensing material with a high electro-optic coefficient, ideal for optical electric field sensors. Achieving high precision in electric field sensing requires fabricating optical waveguides on BGO. Traditional waveguide writing methods face challenges with this material. This study explores using femtosecond laser writing technology for preparing waveguides on BGO, leveraging ultrafast optical fields for superior material modification. Our experimental analysis shows that a cladding-type waveguide, written with a femtosecond laser at 200 kHz repetition frequency and 10.15 mW average power (pulse energy of 50.8 nJ), exhibits excellent light-guiding characteristics. Simulations of near-field optical intensity distribution and refractive index variations using the refractive index reconstruction method demonstrate that the refractive index modulation ensures single-mode transmission and effectively confines light to the core layer. In situ refractive index characterization confirms the feasibility of fabricating a waveguide with a refractive index reduction on BGO. The resulting waveguide has a loss per unit length of approximately 1.2 dB/cm, marking a successful fabrication. Additionally, we design an antenna electrode, analyze sensor performance indicators, and integrate a preparation process plan for the antenna electrode. This achievement establishes a solid experimental foundation for future studies on BGO crystal waveguides in electric field measurement applications.

RESUMEN

Antimicrobial resistance (AMR) poses a significant threat to global health, powered by pathogens that become increasingly proficient at withstanding antibiotic treatments. This review introduces the factors contributing to antimicrobial resistance (AMR), highlighting the presence of antibiotics in different environmental and biological matrices as a significant contributor to the resistance. It emphasizes the urgent need for robust and effective detection methods to identify these substances and mitigate their impact on AMR. Traditional techniques, such as liquid chromatography-mass spectrometry (LC-MS) and immunoassays, are discussed alongside their limitations. The review underscores the emerging role of biosensors as promising alternatives for antibiotic detection, with a particular focus on electrochemical biosensors. Therefore, the manuscript extensively explores the principles and various types of electrochemical biosensors, elucidating their advantages, including high sensitivity, rapid response, and potential for point-of-care applications. Moreover, the manuscript investigates recent advances in materials used to fabricate electrochemical platforms for antibiotic detection, such as aptamers and molecularly imprinted polymers, highlighting their role in enhancing sensor performance and selectivity. This review culminates with an evaluation and summary of commercially available and spin-off sensors for antibiotic detection, emphasizing their versatility and portability. By explaining the landscape, role, and future outlook of electrochemical biosensors in antibiotic detection, this review provides insights into the ongoing efforts to combat the escalating threat of AMR effectively.

Asunto(s)

Antibacterianos , Técnicas Biosensibles , Técnicas Electroquímicas , Técnicas Biosensibles/métodos , Antibacterianos/análisis , Técnicas Electroquímicas/métodos , Técnicas Electroquímicas/instrumentación , Humanos