RESUMEN

High ocean temperatures caused by global warming induce oxidative stress in aquatic organisms. Melatonin treatment and irradiation using red light-emitting diodes (LEDs) have been reported to reduce oxidative stress in a few aquatic organisms. However, the effects of red LED irradiation and melatonin injection on the antioxidant capacity and degree of apoptosis in abalones, which are nocturnal organisms, have not yet been reported. In this study, we compared the expression levels of antioxidant enzymes, total antioxidant capacity, and the degree of apoptosis in abalones subjected to red LED irradiation and melatonin treatment. The results revealed that at high water temperatures (25 °C), the mRNA expression levels of the superoxide dismutase (SOD) and glutathione peroxidase (GPx) genes and the antioxidant activity of SOD decreased in abalones in the red-LED irradiated and melatonin-treated groups compared with those in abalones in the control group. Although high water temperatures induced DNA damage in the abalone samples, the degree of apoptosis was lower in the red-LED irradiated and melatonin-treated groups than in the control group. Overall, the abalones in the melatonin-treated and red-LED irradiated groups showed reduced oxidative stress and increased antioxidant enzyme levels under thermal stress compared with those in the control group. Therefore, red LED irradiation is a promising alternative to melatonin treatment, which is difficult to administer continuously for a long time, for protecting abalones from oxidative stress.

Asunto(s)

RESUMEN

The aim of this study was to compare two types of light irradiation devices for antimicrobial photodynamic therapy (aPDT). A 660-nm light-emitting diode (LED) and a 665-nm laser diode (LD) were used for light irradiation, and 0.1 mg/L TONS 504, a cationic chlorin derivative, was used as the photosensitizer. We evaluated the light attenuation along the vertical and horizontal directions, temperature rise following light irradiation, and aPDT efficacy against Staphylococcus aureus under different conditions: TONS 504 only, light irradiation only, and TONS 504 with either LED (30 J/cm2) or LD light irradiation (continuous: 30 J/cm2; pulsed: 20 J/cm2 at 2/3 duty cycle, 10 J/cm2 at 1/3 duty cycle). Both LED and LD light intensities were inversely proportional to the square of the vertical distance from the irradiated area. Along the horizontal distance from the nadir of the light source, the LED light intensity attenuated according to the cosine quadrature law, while the LD light intensity did not attenuate within the measurable range. Following light irradiation, the temperature rise increased as the TONS 504 concentration increased in the order of pulsed LD < continuous LD < LED irradiation. aPDT with light irradiation only or TONS 504 only had no antimicrobial effect, while aPDT with TONS 504 under continuous or pulsed LD light irradiation provided approximately 3 log reduction at 30 J/cm2 and 20 J/cm2 and approximately 2 log reduction at 10 J/cm2. TONS 504-aPDT under pulsed LD light irradiation provided anti-microbial effect without significant temperature rise.

Asunto(s)

RESUMEN

The Contamination Sanitization Inspection and Disinfection (CSI-D) device is a handheld fluorescence-based imaging system designed to disinfect food contact surfaces using ultraviolet-C (UVC) illumination. This study aimed to determine the optimal CSI-D parameters (i.e., UVC exposure time and intensity) for the inactivation of the following foodborne bacteria plated on non-selective media: generic Escherichia coli (indicator organism) and the pathogens enterohemorrhagic E. coli, enterotoxigenic E. coli, Salmonella enterica, and Listeria monocytogenes. Each bacterial strain was spread-plated on non-selective agar and exposed to high-intensity (10 mW/cm2) or low-intensity (5 mW/cm2) UVC for 1-5 s. Control plates were not exposed to UVC. The plates were incubated overnight at 37 °C and then enumerated. Three trials for each bacterial strain were conducted. Statistical analysis was carried out to determine if there were significant differences in bacterial growth between UVC intensities and exposure times. Overall, exposure to low or high intensity for 3-5 s resulted in consistent inhibition of bacterial growth, with reductions of 99.9-100 % for E. coli, 96.8-100 % for S. enterica, and 99.2-100 % for L. monocytogenes. The 1 s exposure time showed inconsistent results, with a 66.0-100 % reduction in growth depending on the intensity and bacterial strain. When the results for all strains within each species were combined, the 3-5 s exposure times showed significantly greater (p < 0.05) growth inhibition than the 1 s exposure time. However, there were no significant differences (p > 0.05) in growth inhibition between the high and low UVC intensities. The results of this study show that, in pure culture conditions, exposure to UVC with the CSI-D device for ≥3 s is required to achieve consistent reduction of E. coli, S. enterica, and L. monocytogenes.

RESUMEN

The study aimed to explore the impact of a novel near-infrared LED (nNIR) with an extended spectrum on skin enhancement and hair growth. Various LED sources, including White and nNIRs, were compared across multiple parameters: cytotoxicity, adenosine triphosphate (ATP) synthesis, reactive oxygen species (ROS) reduction, skin thickness, collagen synthesis, collagenase expression, and hair follicle growth. Experiments were conducted on human skin cells and animal models. Cytotoxicity, ATP synthesis, and ROS reduction were evaluated in human skin cells exposed to nNIRs and Whites. LED irradiation effects were also studied on a UV-induced photoaging mouse model, analyzing skin thickness, collagen synthesis, and collagenase expression. Hair growth promotion was examined as well. Results revealed both White and nNIR were non-cytotoxic to human skin cells. nNIR enhanced ATP and collagen synthesis while reducing ROS levels, outperforming the commonly used 2chip LEDs. In the UV-induced photoaging mouse model, nNIR irradiation led to reduced skin thickness, increased collagen synthesis, and lowered collagenase expression. Additionally, nNIR irradiation stimulated hair growth, augmented skin thickness, and increased hair follicle count. In conclusion, the study highlighted positive effects of White and nNIR irradiation on skin and hair growth. However, nNIR exhibited superior outcomes compared to White. Its advancements in ATP content, collagen synthesis, collagenase inhibition, and hair growth promotion imply increased ATP synthesis activity. These findings underscore nNIR therapy's potential as an innovative and effective approach for enhancing skin and promoting hair growth.

Asunto(s)

RESUMEN

This study developed an advanced 850 nm centered distributed Bragg reflector (DBR) (broadband DBR) composed of nanomaterial-based multiple structures to improve the optical efficiency of an 850 nm near-infrared light-emitting diode (NIR-LED). A combined 850 nm centered broadband DBR was fabricated by growing an 800 nm centered ten-pair DBR on a 900 nm centered ten-pair DBR (denoted as a combined DBR). The combined DBR exhibited a slightly wider peak band than conventional DBRs. Furthermore, the peak band width of the combined DBR significantly increased upon using a reflective AlAs buffer layer that reduced the overlapped reflection. The output power (20.5 mW) of NIR-LED chips using the combined DBR with an AlAs buffer layer exceeded that of a conventional 850 nm centered DBR (14.5 mW) by more than 40%. Results indicated that combining the optical conditions of wavelengths and the AlAs buffer layer effectively strengthened the broadband effect of the DBR and increased the optical efficiency of the 850 nm NIR-LED.

RESUMEN

A photoacoustic sensor system (PAS) intended for carbon dioxide (CO2) blood gas detection is presented. The development focuses on a photoacoustic (PA) sensor based on the so-called two-chamber principle, i.e., comprising a measuring cell and a detection chamber. The aim is the reliable continuous monitoring of transcutaneous CO2 values, which is very important, for example, in intensive care unit patient monitoring. An infrared light-emitting diode (LED) with an emission peak wavelength at 4.3 µm was used as a light source. A micro-electro-mechanical system (MEMS) microphone and the target gas CO2 are inside a hermetically sealed detection chamber for selective target gas detection. Based on conducted simulations and measurement results in a laboratory setup, a miniaturized PA CO2 sensor with an absorption path length of 2.0 mm and a diameter of 3.0 mm was developed for the investigation of cross-sensitivities, detection limit, and signal stability and was compared to a commercial infrared CO2 sensor with a similar measurement range. The achieved detection limit of the presented PA CO2 sensor during laboratory tests is 1 vol. % CO2. Compared to the commercial sensor, our PA sensor showed less influences of humidity and oxygen on the detected signal and a faster response and recovery time. Finally, the developed sensor system was fixed to the skin of a test person, and an arterialization time of 181 min could be determined.

Asunto(s)

RESUMEN

An artificial light source is the optimal element for studying the usability of the medicinal plant Astragalus membranaceus as a sprout vegetable. Based on artificial light source conditions, formononetin (FO) level was the highest (2.6 mg/L) in A. membranaceus exposed to white light emitting diode (LED) light, and calycosin (CA) level was the highest (3.09 mg/L) in the plant exposed to red LED light. According to the publicly available transcriptome data of LED-exposed sprout A. membranaceus LED, reference genes related to the content enhancement of FO, an isoflavone compound, and those related to the content enhancement of CA were selected. The expression patterns of these genes were assayed using qPCR. Among the genes related to FO enhancement, Gene-225190T showed the highest mRNA levels in cells of LED-white light-exposed sprout A. membranaceus; among the genes related to CA enhancement, Gene_042770T showed the highest expression under red LED light. Most genes related to the overall biosynthesis regulation of flavonoids of the upper concept of isoflavone were highly expressed in response to red LED light, and the transcriptional level of 4CL in response to red LED light was the highest. Based on these results, the artificial light sources that regulated the FO and CA contents in sprouts A. membranaceus were white and red LED lights, and the selected reference genes were capable of regulating isoflavone biosynthesis.

Asunto(s)

RESUMEN

We investigated the mechanism of action of photobiomodulation (PBM) with light-emitting diode (led) 640 nm of glutamine-dependent CT26 cells. Cells were exposed to 0.147-10.979 mW/cm2 of 640 ± 15 nm laser light for 15 min/day for 10 days. Cell proliferation and apoptosis were detected by MTT (3-(4,5)-dimethylthiahiazo (-z-y1)-3,5-diphenytetrazoliumromide) and annexin V-FITC assays. mRNA and protein levels of cell proliferation-related genes were measured by RT-PCR and western blotting, respectively. With Gln 7.94 mM, on Day 8 and 10, genes GLUT1, MEK1, ERK2, BCL2, E2F1, HO-1, Ctnnb1, and Per2 was significantly upregulated (p < 0.01) of glutamine addiction. In PBM therapy, compared with the non-illuminated group, 2.17 mW/cm2 can significantly reduce cell apoptosis, the mRNA level of gene mTOR1 was significantly upregulated, and the protein level of raptor of GLUT1 and mTOR1, MEK1/2, and ERK1/2 were upregulated. LED 640 nm inhibits cell apoptosis without increasing cell proliferation by regulating GLUT1, MEK/ERK, and PI3K/AKT/mTOR signals.

Asunto(s)

RESUMEN

In this paper, in order to address the problem of electron leakage in AlGaN ultra-violet light-emitting diodes, we have proposed an electron-blocking free layer AlGaN ultra-violet (UV) light-emitting diode (LED) using polarization-engineered heart-shaped AlGaN quantum barriers (QB) instead of conventional barriers. This novel structure has decreased the downward band bending at the interconnection between the consecutive quantum barriers and also flattened the electrostatic field. The parameters used during simulation are extracted from the referred experimental data of conventional UV LED. Using the Silvaco Atlas TCAD tool; version 8.18.1.R, we have compared and optimized the optical as well as electrical characteristics of three varying LED structures. Enhancements in electroluminescence at 275 nm (52.7%), optical output power (50.4%), and efficiency (61.3%) are recorded for an EBL-free AlGaN UV LED with heart-shaped Al composition in the barriers. These improvements are attributed to the minimized non-radiative recombination on the surfaces, due to the progressively increasing effective conduction band barrier height, which subsequently enhances the carrier confinement. Hence, the proposed EBL-free AlGaN LED is the potential solution to enhance optical power and produce highly efficient UV emitters.

RESUMEN

This study determined the effects of supplemental light-emitting diode (LED) treatments on the nutrient quality and volatile compounds of sweet basil leaves during stimulated shelf-life. Basil plants were grown in a greenhouse under different supplemental LEDs (white, blue, red, or red + blue each at 100 µmol m-2 s-1), while plants grown under sunlight served as the control. The findings revealed that plant height and canopy of basil showed a significant increase under red LED irradiation, while the leaf area was improved by the blue LED exposure. Moreover, blue LEDs enhanced the levels of phenolic compounds, total phenolic contents, total flavonoid contents, and PAL (phenylalanine ammonia-lyase) activity in harvested sweet basil leaves. Additionally, red + blue LEDs lighting stimulated the production of volatile compounds. During storage, the samples treated with blue LEDs maintained a higher quality compared to the control samples. In conclusion, the application of blue or red + blue LEDs prior to harvest can be beneficial for promoting and preserving the nutritional quality of sweet basil.

Asunto(s)

RESUMEN

Microalgae biomass and pigments have a high economic value due to their many biological and commercial applications. In this sense, Spirulina platensis was grown under different (LEDs) light-emitting diodes. The current examination aims to increase the biomass production of S. platensis by formulating an optimal growth condition under different LED lights. Light-emitting diodes have a precise wavelength that has an encouraging effect on microalgae biomass production. For this purpose, the light intensity of 3000 lx was used to illuminate the culture medium, resulting in enhanced S. platensis biomass production. The highest optical density of 0.576 and dry cell weight of 0.343 g/L was recorded for the white light-emitting diode, and the red light-emitting diode, the optical density of 0.479 and dry cell weight of 0.321 g/L was recorded. The highest protein content of 66.10 ± 0.44% was registered with a blue light-emitting diode, followed by a white light-emitting diode with a protein content of 60.86 ± 0.39%. This research is an essential step in defining the light condition that might be useful to increase the biomass production of S. platensis. The study's findings demonstrated that exposure to various light-emitting diode colors could enhance both the quality and quantity of biomass produced in S. platensis cultures and encourage the use of light-emitting diodes as a light source for S. platensis farming without any undesirable effects on growth.

RESUMEN

[This corrects the article DOI: 10.3389/fpls.2022.1055352.].

RESUMEN

Photobiomodulation (PBM), also known as Low-level Laser Therapy (LLLT), involves the use of light from a laser or light-emitting diode (LED) in the treatment of various disorders and it has recently gained increasing interest. Progressive neuronal loss with attendant consequences such as cognitive and/or motor decline characterize neurodegenerative diseases. The available therapeutic drugs have only been able to provide symptomatic relief and may also present with some side effects, thus precluding their use in treatment. Recently, there has been an exponential increase in interest and attention in the use of PBM as a therapy in various neurodegenerative diseases in animal studies. Because of the financial and social burden of neurodegenerative diseases on the sufferers and the need for the discovery of potential therapeutic inventions in their management, it is pertinent to examine the beneficial effects of PBM and the various cellular mechanisms by which it modulates neural activity. Here, we highlight the various ways by which PBM may possess beneficial effects on neural activity and has been reported in various neurodegenerative conditions (Alzheimer's disease, Parkinson's disease, epilepsy, TBI, stroke) with the hope that it may serve as an alternative therapy in the management of neurodegenerative diseases because of the biological side effects associated with drugs currently used in the treatment of neurodegenerative diseases.

RESUMEN

Based on the review of the literature, this article examines the potential therapeutic benefits of photobiomodulation therapy (PBMT) or low-level laser therapy (LLLT) for the treatment of cardiovascular disorders. The methodology involved searching PubMed, Google Scholar, and Central databases for relevant articles published from inception till date. The articles included in this review were preclinical and clinical studies investigating the effects of PBMT and LLLT on the heart. The article summarizes the findings of nineteen studies investigating the effects of PBMT and LLLT on various parameters related to heart failure (HF) and myocardial infarction (MI), including inflammation, oxidative stress, angiogenesis, cardiac function, and remodeling. The studies suggest that PBMT and LLLT have potential therapeutic benefits for the treatment of cardiovascular diseases and could be used in combination with traditional pharmacological therapies to enhance their effects or as a stand-alone treatment for patients who are not responsive to or cannot tolerate traditional therapies. In conclusion, this review article highlights the promising potential of PBMT for the treatment of HF and MI and the need for further research to fully understand its mechanisms of action and optimize treatment protocols.

RESUMEN

Light intensity and spectral composition highly affect plant physiology, growth, and development. According to growing conditions, each species and/or cultivar has an optimum light intensity to drive photosynthesis, and different light spectra trigger photosynthetic responses and regulate plant development differently. For the maintenance of natural sports pitches, namely professional football competitions, turf quality is a key condition. Due to the architecture of most football stadiums, the lawns receive low intensities of natural light, so supplementary artificial lighting above the turf is required. The use of light-emitting diodes (LEDs) can have a higher cost-benefit ratio than traditional high-pressure sodium lamps. The continuous emission spectrum, combined with high spectral selectivity and adjustable optical power, can be used to optimize plant growth and development. Thus, perennial ryegrass (Lolium perenne L.) plants, commonly used for lawns, were primarily grown at three different intensities (200, 300, and 400 µmol m-2 s-1) of cool white light. Despite the higher water and energy consumption, 400 µmol m-2 s-1 maximizes the plant's efficiency, with higher photosynthetic rates and foliar pigment concentration, and more foliar soluble sugars and aboveground biomass accumulation. Then, it was evaluated the perennial ryegrass (Double and Capri cultivars) response to different spectral compositions [100% cool white (W), 80% Red:20% Blue (R80:B20), 90% Red:10% Blue (R90:B10), and 65% Red:15% Green:20% Blue (R65:G15:B20)] at 400 µmol m-2 s-1. Both cultivars exhibited similar responses to light treatments. In general, W contributed to the better photosynthetic performance and R90:B10 to the worst one. Water consumption and aboveground biomass were equal in all light treatments. R80:B20 allows energy savings of 24.3% in relation to the W treatment, showing a good compromise between physiological performance and energy consumption.

RESUMEN

Charge imbalance in quantum-dot light-emitting diodes (QLEDs) causes emission degradation. Therefore, many studies focused on improving hole injection into the QLEDs-emitting layer owing to lower hole conductivity compared to electron conductivity. Herein, CuCo2O4 has a relatively higher hole conductivity than other binary oxides and can induce an improved charge balance. As the annealing temperature decreases, the valence band maximum (VBM) of CuCo2O4 shifts away from the Fermi energy level (EF), resulting in an enhanced hole injection through better energy level alignment with hole transport layer. The maximum luminance and current efficiency of the CuCo2O4 hole injection layer (HIL) of the QLED were measured as 93,607 cd/m2 and 11.14 cd/A, respectively, resulting in a 656% improvement in luminous performance of QLEDs compared to conventional metal oxide HIL-based QLEDs. These results demonstrate that the electrical properties of CuCo2O4 can be improved by adjusting the annealing temperature, suggesting that solution-processed spinel can be applied in various optoelectronic devices.

RESUMEN

In this study, SrGe4 O9 :Mn4+ red phosphors for plant illumination were prepared using a high-temperature solid-phase method. The samples were characterized and analyzed by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fluorescence spectroscopy, and other techniques. The phase structure, apparent morphology, and luminescence properties of the SrGe4 O9 :Mn4+ red phosphors were investigated. The results indicated that the dopant Mn4+ was incorporated into the matrix structure by substituting some Ge4+ ions without any changes in the crystal structure of the SrGe4 O9 matrix. The samples comprised micron-scale particles and exhibited high purity and uniform distribution of elements. The SrGe4 O9 :Mn4+ phosphors exhibited relatively strong red light emission at 660 nm under the excitation of a 430-nm blue light, and the luminescence intensity was the highest when the Mn4+ doping amount was 1%. Proper doping of Ti4+ or Sn4+ could effectively improve the luminescence intensity of the SrGe4 O9 :Mn4+ phosphors. The light-emitting diode (LED) device packaging showed that the SrGe4 O9 :Mn4+ red phosphors could be used for plant growth illumination.

Asunto(s)

RESUMEN

In the past decade, the potential of positioning LED lamps in between the canopy (intra-canopy) to enhance crop growth and yield has been explored in greenhouse cultivation. Changes in spatial heterogeneity of light absorption that come with the introduction of intra-canopy lighting have not been thoroughly explored. We calibrated and validated an existing functional structural plant model (FSPM), which combines plant morphology with a ray tracing model to estimate light absorption at leaflet level. This FSPM was used to visualize the light environment in a tomato crop illuminated with intra-canopy lighting, top lighting or a combination of both. Model validation of light absorption of individual leaves showed a good fit (R2 = 0.93) between measured and modelled light absorption of the canopy. Canopy light distribution was then quantified and visualized in three voxel directions by means of average absorbed photosynthetic photon flux density (PPFD) and coefficient of variation (CV) within that voxel. Simulations showed that the variation coefficient within horizontal direction was higher for intra-canopy lighting than top lighting (CV=48% versus CV= 43%), while the combination of intra-canopy lighting and top lighting yielded the lowest CV (37%). Combined intra-canopy and top lighting (50/50%) had in all directions a more uniform light absorption than intra-canopy or top lighting alone. The variation was minimal when the ratio of PPFD from intra-canopy to top lighting was about 1, and increased when this ratio increased or decreased. Intra-canopy lighting resulted in 8% higher total light absorption than top lighting, while combining 50% intra-canopy lighting with 50% top lighting, increased light absorption by 4%. Variation in light distribution was further reduced when the intra-canopy LEDs were distributed over strings at four instead of two heights. When positioning LED lamps to illuminate a canopy both total light absorption and light distribution have to be considered.

RESUMEN

In this study, novel light emitting diode (LED)-activated periodate (PI) advanced oxidation process (AOP) at an irradiation wavelength in the ultraviolet A range (UVA, UVA-LED/PI AOP) was developed and investigated using naproxen (NPX) as a model micropollutant. The UVA-LED/PI AOP remarkably enhanced the degradation of NPX and seven other selected micropollutants with the observed pseudo-first-order rate constants ranging from 0.069 ± 0.001 to 4.50 ± 0.145 min-1 at pH 7.0, demonstrating a broad-spectrum micropollutant degradation ability. Lines of evidence from experimental analysis and kinetic modeling confirmed that hydroxyl radical (•OH) and ozone (O3) were the dominant species generated in UVA-LED/PI AOP, and they contributed evenly to NPX degradation. Increasing the pH and irradiation wavelength negatively affected NPX degradation, and this could be well explained by the decreased quantum yield (ΦPI) of PI. The degradation kinetics of NPX by the UVA-LED/PI AOP in the presence of water matrices (i.e., chloride, bicarbonate, and humic acid) and in real waters were examined, and the underlying mechanisms were illustrated. A total of nine transformation products were identified from NPX oxidation by the UVA-LED/PI AOP, mainly via hydroxylation, dealkylation, and oxidation pathways. The UVA-LED/PI AOP proposed might be a promising technology for the treatment of micropollutants in aqueous solutions. The pivotal role of ΦPI during light photolysis of PI may guide the future design of light-assisted PI AOPs.

Asunto(s)

RESUMEN

BACKGROUND: Although blue light is one of the therapeutic approaches used to treat acne vulgaris (AV), there is no consensus on its effectiveness. As a result, it is not recommended in the major acne vulgaris treatment guidelines. OBJECTIVE: The goal of this study was to look into the mechanism, safety, and efficacy of blue light therapy. We achieved this by examining the pathological response, inflammation, and depth of light penetration in a mouse model of cystic AV. METHODS: The aims of the study were addressed by exposing the mice to light with a wavelength of 415 nm under four different irradiation conditions. The exposure was done for five consecutive days followed by a no irradiation period of 72 h. RESULTS: Blue light treatment was most effective when irradiation was performed at 100 mW/cm2 for 20 min for five consecutive days. Inflammatory responses emerged 72 h after the final irradiation dose was administered. These responses were not associated with apoptosis as cleaved caspase-3 staining revealed no significant increases in apoptosis in the skin under any of the tested conditions. Blue light reached the superficial layer of the acne cyst at 5% of the total irradiation power and was attenuated by half for every 50 µm of progress through the cyst. CONCLUSION: In conclusion, blue light could control severe dermatologic inflammatory responses; therefore, it can be used to irradiate AV with high inflammation levels on a daily basis until improvement is observed. In addition, porphyrin, a metabolite of Cutibacterium acnes, and reactive oxygen species generated by the surrounding skin tissue may have essential roles in AV treatment.

Asunto(s)