RESUMEN

Enzyme-linked immunosorbent assay (ELISA) is the gold standard technique for measuring protein biomarkers due to its high sensitivity, specificity, and throughput. Despite its success, continuous advancements in ELISA and immunoassay formats are crucial to meet evolving global challenges and to address new analytical needs in diverse applications. To expand the capabilities and applications of immunoassays, we introduce a novel ELISA-like assay that we call Bioluminescent-bacteria-linked immunosorbent assay (BBLISA). BBLISA is an enzyme-free assay that utilizes the inner filter effect between the bioluminescent bacteriaAllivibrio fischeriand metallic nanoparticles (gold nanoparticles and gold iridium oxide nanoflowers) as molecular absorbers. Functionalizing these nanoparticles with antibodies induces their accumulation in wells upon binding to molecular targets, forming the classical immune-sandwich complex. Thanks to their ability to adsorb the light emitted by the bacteria, the nanoparticles can suppress the bioluminescence signal, allowing the rapid quantification of the target. To demonstrate the bioanalytical properties of the novel immunoassay platform, as a proof of principle, we detected two clinically relevant biomarkers (human immunoglobulin G and SARS-CoV-2 nucleoprotein) in human serum, achieving the same sensitivity and precision as the classic ELISA. We believe that BBLISA can be a promising alternative to the standard ELISA techniques, offering potential advancements in biomarker detection and analysis by combining nanomaterials with a low-cost, portable bioluminescent platform.

Asunto(s)

RESUMEN

Interleukin-18 binding protein (IL-18BP) is a natural IL-18 inhibitor in vivo, which can effectively neutralize IL-18 and inhibit the inflammatory signaling pathway induced by IL-18, thus playing an anti-inflammatory role. Traditional production methods primarily rely on eukaryotic animal cell expression systems, which often entail complex processes, lower yields, and increase production costs. In this study, we present a novel approach for expressing IL-18BP fusion protein using the Escherichia coli (E. coli) system. The N-terminal segment of IL-18BP was fused with the small ubiquitin-related modifier (SUMO) tag, enabling soluble expression, while the C-terminal segment was fused with the human IgG1 Fc fragment to prolong its in vivo lifespan. Through screening, we obtained a high-expression engineering strain from a single colony and developed optimized protocols for fermentation and purification of the recombinant SUMO-IL-18BP-Fc protein. The SUMO tag was subsequently cleaved using SUMO protease, and the purified recombinant human IL-18BP-Fc (rhIL-18BP-Fc) exhibited a purity exceeding 90% with a yield of 1 g per liter of bacterial solution. The biological activities and underlying mechanisms of rhIL-18BP-Fc were evaluated using cell lines and a mouse model. Our results demonstrated that rhIL-18BP-Fc effectively inhibited IL-18-stimulated IFN-γ production in KG-1a cells in vitro and ameliorated DSS-induced ulcerative colitis in mice. In conclusion, we successfully employed the SUMO fusion system to achieve high-level production, soluble expression, and prolonged activity of rhIL-18BP-Fc in E. coli. These findings lay the groundwork for future large-scale industrial production and pharmaceutical development of rhIL-18BP-Fc protein. KEY POINTS: • Effective expression, fermentation, and purification of bioactive rhIL-18BP-Fc protein in E. coli. • The rhIL-18BP-Fc protein has a great potential for the therapy of ulcerative colitis by inhibiting the expression of inflammatory factors.

Asunto(s)

RESUMEN

Immunoglobulins are proteins produced by the immune system, which bind specifically to the antigen that induced their formation and target it for destruction. Highly purified human immunoglobulins are commonly used in research laboratories for several applications, such as in vitro to obtain hybridomas and in vivo animal immunisation. Several affinity purification methods are used to purify immunoglobulins from human serum, such as protein A/G Sepharose beads, polyethylene glycol, and caprylic acid ammonium sulphate precipitation. Here, we provide a detailed protocol for purification of high-quality IgG from human serum, using affinity chromatography with protein G. The protocol is divided into four main steps (column preparation, serum running, wash, and elution) for IgG purification, and two extra steps (protein dialysis and sucrose concentration) that should be performed when buffer exchange and protein concentration are required. Several IgG affinity purification methods using protein A or G are available in the literature, but protein A has a higher affinity for rabbit, pig, dog, and cat IgG, while protein G has a higher affinity for mouse and human IgG. This affinity-based purification protocol uses protein G for a highly specific purification of human IgG for animal immunization, and it is particularly useful to purify large amounts of human IgG. This protocol was validated in: Pain (2019), DOI: 10.1097/j.pain.0000000000001662 Graphical abstract IgG purification protocol. The IgG purification protocol consists of four main steps (column preparation, serum running, wash, and elution) and two extra steps (protein dialysis and concentration). a. Diluted serum is added to the protein G beads and IgG binds to the Fc receptors on protein G beads. b. Beads are washed in Hartman's solution to fully remove the complex protein mixture (multicolour shapes, as depicted in the graphical abstract). c. IgG (orange triangles, as depicted in the graphical abstract) are removed from protein G with glycine and collected in Tris buffer. d. The IgG is transferred into a semi-permeable membrane ('snake skin') and allowed to dialyse overnight for buffer exchange with a physiological solution (Hartmann's).

RESUMEN

A 58-year-old Caucasian male developed generalized weakness, bilateral upper and lower extremity arthralgias, left pedal edema, and a new rash over two weeks after receiving one dose of dupilumab for chronic sinusitis. He was found to be positive for perinuclear anti-neutrophil cytoplasmic antibodies and myeloperoxidase, with evidence of interstitial lung disease on CT imaging. A skin biopsy showed eosinophilic vasculitis and a kidney biopsy showed pauci-immune glomerulonephritis. He was diagnosed with eosinophilic granulomatosis with polyangiitis due to dupilumab exposure.

RESUMEN

We developed new measurement configurations based on organic electrochemical transistors (OECTs). Three types of COOH-functionalized bioreceptor layers were deposited on indium tin oxide (ITO) electrodes on poly(ethylene terephthalate) (PET) substrates and their performance was tested using single gate functionalization organic electrochemical transistor (S-OECT) and dual gate functionalization organic electrochemical transistor (D-OECT) configurations. The three layers included one p-type semiconductor, one insulator, and one self-assembled layer, and the dual gates were connected in series through buffer solutions, so the solution-electrode interfaces had the opposite polarities. We investigated the sensitivities of these systems using the human IgG antigen-human IgG antibody receptor pair for main experiments, and drifts of antibody-functionalized gates without analytes as control experiments. Drifts without analyte can obscure the real sensitivity. We show that the D-OECT has the capability to cancel the drifts, and is also beneficial for showing the sensitivity more exactly. This configuration has the ability to increase the accuracy of antibody-antigen interaction detection, and further decrease or eliminate the effect of ions in the buffer solution. We also prove that the D-OECT can work well with different bioreceptor materials, which indicates that the system can be further applied to different conditions.

Asunto(s)

RESUMEN

CD99 has been demonstrated to play a key role in several biological processes, including the regulation of T-cell activation, cell adhesion, and cell migration. We have also demonstrated that CD99 and its ligands regulate proinflammatory cytokines in NK cells, monocytes and activated T cells. These data suggest CD99 as a potential therapeutic target in cancer. However, the molecular mechanisms by which CD99 and CD99 counter receptors participate in such processes are unclear. High-quality CD99 recombinant proteins produced in large amounts are essential for biological studies and clinical research. In this study, we optimized the various culture conditions for increasing amounts of recombinant protein production with good biological activity. Intracellular immunofluorescence staining was performed to identify the highly expressing CD99HIgG cells. We further investigated the culture conditions for recombinant protein production. A double antibody sandwich enzyme-linked immunosorbent assay was employed to determine the level of secreted CD99HIgG proteins in the culture supernatant of various culture conditions. Later, affinity chromatography using protein G was used to purify CD99HIgG proteins from the culture supernatant of three proper culture conditions. According to our previous report, which utilized Western blotting, the purified CD99HIgG obtained from all tested culture conditions is composed of the CD99 extracellular part fused with the human IgG Fc part in dimer form. For biological activity, the obtained CD99HIgG proteins showed the ability to ligate with the CD99 counter receptor, resulting in the induction of cytokine production.

Asunto(s)

RESUMEN

Bacterial contamination is a significant concern in food safety. Traditional methods, though being a gold standard for bacterial detection, are time-consuming. In this work, we managed to establish a simple and versatile magnetic-assisted microfluidic method for rapid bacterial detection of fish muscle products, by manipulating anti-human IgG functionalized magnetic beads in a zig-zag shaped microfluidic channel, increasing the probability for bacteria capture. The captured bacteria were characterized by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). This method is capable of isolating Escherichia coli, Staphylococcus aureus and Klebsiella pneumoniae from 5 µL of sablefish sarcoplasmic protein sample, and detecting Escherichia coli in the range of 6.0 to 6.0×104 CFU/mL with a detection limit of 6 CFU/mL. Bacterial growth on salmon sashimi during its period of storage was successfully monitored. The current protocol holds great potential for pathogen detection and microbial control in the food industry.

Asunto(s)

RESUMEN

Human IgG is one of the most important immunoglobulins in the human body. The present study described the fabrication of four kinds of layer-by-layer structures of copper metal-organic frameworks (Cu-MOFs) on the working electrode by electrodeposition, which were then applied as an electrochemical sensor for the sensitive determination of IgG in serum. First, MOFs synthesized using different deposition potentials are expected to have varied morphology and properties. Herein, four copper MOFs (Cu-MOFs) were electrosynthesized by a simple and direct reduction approach. The as-synthesized Cu-MOFs exhibit varied morphology and electrocatalytic behavior. Then, IgG was employed as a template in the electropolymerization of pyrrole-imprinted films on the surface of glassy carbon electrodes. Finally, the template protein was removed to form a molecularly imprinted film with the capability to qualitatively and quantitatively signaling of IgG. Under optimized conditions, the sensor for IgG exhibits a wide detection range of 0.01-10 ng mL-1 with a limit of detection (LOD) of 3 pg mL-1 (S/N = 3). Besides, other parameters including the selectivity, reproducibility (RSD 3.6%), and recovery rate (95.2-102.0%) are all satisfactory. The practicability of the sensor was verified by detecting IgG in human serum samples, which indicated that the sensor was suitable for potential clinical applications.

Asunto(s)

RESUMEN

Human immunoglobulin G subclass 3 (IgG3) possesses a uniquely long hinge region that separates its Fab antigen-binding and Fc receptor-binding regions. Owing to this hinge length, the molecular structure of full-length IgG3 remains elusive, and the role of the two conserved Fc glycosylation sites are unknown. To address these issues, we subjected glycosylated and deglycosylated human myeloma IgG3 to multidisciplinary solution structure studies. Using analytical ultracentrifugation, the elongated structure of IgG3 was determined from the reduced sedimentation coefficients s020,w of 5.82 to 6.29 S for both glycosylated and deglycosylated IgG3. X-ray and neutron scattering showed that the Guinier RG values were 6.95 nm for glycosylated IgG3 and were unchanged after deglycosylation, again indicating an elongated structure. The distance distribution function P(r) showed a maximum length of 25 to 28 nm and three distinct maxima. The molecular structure of IgG3 was determined using atomistic modeling based on molecular dynamics simulations of the IgG3 hinge and Monte Carlo simulations to identify physically realistic arrangements of the Fab and Fc regions. This resulted in libraries containing 135,135 and 73,905 glycosylated and deglycosylated IgG3 structures, respectively. Comparisons with the X-ray and neutron scattering curves gave 100 best-fit models for each form of IgG3 that accounted for the experimental scattering curves. These models revealed the first molecular structures for full-length IgG3. The structures exhibited relatively restricted Fab and Fc conformations joined by an extended semirigid hinge, which explains the potent effector functions of IgG3 relative to the other subclasses IgG1, IgG2, and IgG4.

Asunto(s)

RESUMEN

(1) Background: The validation of biological antigens is the study's utmost goal in biomedical applications. We evaluated three different probes with single and multiple epitopes through electrochemical detection of specific IgG in serum for human strongyloidiasis diagnosis. (2) Methods: Screen-printed gold electrodes were used and probes consisting of two single-epitope synthetic peptides (D3 and C10) with different sequences, and a multi-epitope antigen [detergent phase (DP)-hydrophobic membrane proteins]. Human serum samples from three populations were used: Strongyloides stercoralis positive, positive for other parasitic infections and negative controls. To test the immobilization of probes onto a screen-printed gold electrode and the serum IgG detection, electrochemical analyses were carried out through differential pulse voltammetry (DPV) and the electrode surface analyses were recorded using atomic force microscopy. (3) Results: The electrochemical response in screen-printed gold electrodes of peptides D3 and C10 when using positive serum was significantly higher than that when using the DP. Our sensor improved sensitivity to detect strongyloidiasis. (4) Conclusions: Probes' sequences are critical factors for differential electrochemical responses, and the D3 peptide presented the best electrochemical performance for strongyloidiasis detection, and may efficiently substitute whole antigen extracts from parasites for strongyloidiasis diagnosis in electrochemical immunosensors.

Asunto(s)

RESUMEN

The ortho-phospho-tyrosine (P-Tyr) pseudoaffinity ligand was immobilized via ether linkage onto polyacrylamide-alginate (PAAm-Alg)-epoxy cryogels prepared according to two different approaches in order to explore their performance in the immunoglobulin G (IgG) purification from human serum. In the first approach, the P-Tyr was attached to cryogel prepared by cryocopolymerization of acrylamide and alginate with allyl glycidyl ether (AGE) as functional comonomer, and methylenebisacrylamide and Ca(II) as crosslinkers, obtaining the PAAm-Alg-AGE-P-Tyr. In the second approach, the PAAm-Alg was synthesized under the same conditions, but without AGE, and the P-Tyr was coupled to epichlorohydrin (ECH)-activated cryogel, obtaining the PAAm-Alg-ECH-P-Tyr. Both pseudoaffinity cryogels were characterized by scanning electron microscopy, swelling tests, porosity, ligand density, and flow dynamics. The human IgG differently interacted with the PAAm-Alg-ECH-P-Tyr and PAAm-Alg-AGE-P-Tyr cryogels, depending on the pH and adsorption buffer system used. The selectivity analyzed by electrophoretic profiles was similar for both cryogels, but PAAm-Alg-ECH-P-Tyr achieved higher IgG adsorption capacity (dynamic capacity of 12.62 mg of IgG/mL of cryogel). The IgG purity assayed by ELISA was 95%. The maximum IgG adsorption capacity and dissociation constant of the PAAm-Alg-ECH-P-Tyr, determined by Langmuir isotherm, were found to be 91.75 mg IgG/g of dry cryogel and 4.60 × 10-6 mol/L at pH 6.0 from aqueous solutions. The PAAm-Alg-AGE-P-Tyr showed potential to purify the Fab fragments from papain-digested human IgG solution at pH 7.0. Fab fragments were separated from Fc fragments (but with uncleaved IgG) in eluted fractions (analyzed by the Western blot technique), with yield of 82% and purity of 95% (determined by radial immunodiffusion).

Asunto(s)

RESUMEN

The nonspecific adsorption and accumulation of biomolecules on electrode interfaces remains a challenge for sensitive and accurate detection of disease markers in complex biological media, and it is highly desired to develop antifouling biosensors capable of assaying targets in complicated real liquids. Herein, an efficient and simple antifouling biosensor was constructed based on a self-designed Y-shaped peptide. The Y-shaped peptide was designed with two branches: one branch with the peptide sequence of EKEKEKE for antifouling, and the other branch with the peptide sequence of HWRGWVA for recognizing of human IgG. Under optimized experimental conditions, electrodes modified with Y-shaped peptides exhibited excellent antifouling and electrochemical sensing performances. The developed biosensor was able to effectively resist biofouling in various protein solutions and even serum samples, and the linear range of the biosensor for human IgG detection was from 100 pg mL-1 to 10 µg mL-1, with a relatively low limit of detection of 32 pg mL-1 (S/N = 3). The antifouling biosensor possesses the capability of assaying human IgG in real serum samples, and this strategy of developing low fouling biosensors based on Y-shaped peptides can be readily expanded to the construction of other biosensing systems for different targets.

Asunto(s)

RESUMEN

Assays for detecting tetanus toxoid are of great significance to be applied in the research of the safety testing of tetanus vaccine. Currently, guinea pigs or mice are usually used to evaluate the toxicity in these assays. Herein, a facile and quick biomineralization process was carried out to generate tetanus human immunoglobulin G (Tet-IgG)-functionalized Au nanoclusters (Tet-IgG-AuNCs). The obtained Tet-IgG-AuNCs exhibited strong red emission with a photoluminescence quantum yield of 13%. Based on surface plasmon resonance measurements, the apparent dissociation constant of the Tet-IgG-AuNC-tetanus toxoid complexes was measured to be 2.27 × 10-8 M. A facile detection approach was developed using a fluorescent Tet-IgG-AuNC-based immunochromatography test strip. By utilizing the high-brightness fluorescent Tet-IgG-AuNCs, this immunosensor showed favorable sensitivity with a detection limit at the level of 0.03 µg/mL. Further results demonstrated that this assay can reliably detect tetanus toxoid and therefore might provide a novel method to replace animal tests for the quantification of tetanus toxicity. Moreover, the antibody-AuNC-based immunochromatography test strip platform serves as a promising candidate to develop new approaches for detecting targeted antigens and biological events of interest.

Asunto(s)

RESUMEN

An advanced molecularly imprinted electrochemical sensor with high sensitivity and selectivity for the detection of Human immunoglobulin G (IgG) was successfully constructed. With acrylamide imprinting systems, surface imprinting on the nanoparticles CuFe2O4 targeted at IgG was employed to prepare molecularly imprinted polymer, which served as recognition element for the electrochemical sensor. Furthermore, the sensor harnessed a molybdenum disulfide (MoS2)@nitrogen doped graphene quantum dots (N-GQDs) with ionic liquid (IL) nanocomposite for signal amplification. Under optimized experimental conditions, the sensor shortened the response time to less than 8 min, and the response was linear at the IgG concentration of 0.1-50 ng·mL-1 with a low detection limit of 0.02 ng·mL-1 (S/N = 3). Our findings suggested that, the sensor exhibited high detectability and long-time stability. The satisfactory results of human serum sample analysis showed that the developed IgG sensor had promising potential clinical applications in detecting IgG content.

Asunto(s)

RESUMEN

FGF21 (Fibroblast Growth Factor 21), which is expressed in the liver, adipose tissue, and pancreas, has been widely known as a therapeutic candidate for metabolic diseases. Though FGF21 is crucial to glucose, lipid, and energy homeostasis, it is not straightforward to develop a new drug with FGF21 due to its short half-life in serum. Here, we derived a novel long-acting FGF21 (LAPS-FGF21), which is chemically conjugated to the human IgG4 Fc fragment for longer half-life in serum. The recombinant human IgG4 Fc fragment and FGF21 were prepared by the refolding of inclusion body and periplasmic expression in Escherichia coli overexpression systems, respectively. The efficacy study of LAPS-FGF21 in a Diet-Induced Obesity (DIO) mouse model revealed that LAPS-FGF21 reduced body weight effectively accompanied by improved glucose tolerance in a dose-dependent manner. The administration of LAPS-FGF21 also improved the blood profiles with a significant reduction in cholesterol and triglyceride levels. Additionally, the pharmacokinetic (PK) studies of LAPS-FGF21 using normal ICR mice demonstrated that the half-life of LAPS-FGF21 was approximately 64-fold longer than FGF21. Taken together, the LAPS-FGF21 could be a feasible drug candidate with excellent bodyweight loss efficacy and longer dosing interval by half-life increase in serum.

Asunto(s)

RESUMEN

We describe a simplified approach for purification and characterization of human 'IgG-Fc' fragment used widely as immunochemical tool and for therapeutic purposes. The 'Fc' fragment was purified from human IgG in a 3-stage column chromatography. The purified 'Fc' fragment appeared as a dimer glycoprotein with an apparent molecular mass of 52,981 Dalton (Ultraflex MALDI TOF/TOF). The Size-exclusion HPLC profile of the purified 'Fc' fragment of human IgG matched that of a commercially procured reference 'Fc' fragment material. The purity of the 'Fc' fragments was >99% by SDS-PAGE and size-exclusion HPLC. The results of Western blotting, immunoelectrophoresis, and mass spectrometry analysis indicate a high purity of the 'Fc' fragment. Peptide mass fingerprint analysis of the purified 'Fc' protein yielded peptides that partially match the known database sequences of FCG3B_HUMAN (Uniprot ID: O75015). This method of purification of the 'Fc' fragment is suitable for achieving high purity level of 'Fc' fragment protein. With this purification approach, the cost of the purified 'Fc' fragment of human IgG is significantly reduced as compared with the current market price of IgG-Fc fragment protein in international market. The purified 'IgG-Fc' fragment protein was found to be negative for major viral markers.

Asunto(s)

RESUMEN

A magnetoelastic (ME) biosensor for wireless detection of analytes in liquid is described. The ME biosensor was tested against human IgG in the range 0-20 µg∙mL-1. The sensing elements, anti-human IgG produced in goat, were immobilized on the surface of the sensor by using a recently introduced photochemical immobilization technique (PIT), whereas a new amplification protocol exploiting gold coated magnetic nanoparticles (core-shell nanoparticles) is demonstrated to significantly enhance the sensitivity. The gold nanoflowers grown on the magnetic core allowed us to tether anti-human IgG to the nanoparticles to exploit the sandwich detection scheme. The experimental results show that the 6 mm × 1 mm × 30 µm ME biosensor with an amplification protocol that uses magnetic nanoparticles has a limit of detection (LOD) lower than 1 nM, works well in water, and has a rapid response time of few minutes. Therefore, the ME biosensor is very promising for real-time wireless detection of pathogens in liquids and for real life diagnostic purpose.

RESUMEN

Type 2 diabetes mellitus (T2DM) is a chronic and progressive hyperglycemic condition. Glucagon-like peptide-1 (GLP1) is an incretin secreted from pancreatic ß-cells and helps to produce insulin to balance the blood glucose level without the risk of hypoglycemia. However, the therapeutic application of GLP1 is limited by its intrinsic short half-life and rapid metabolic clearance in the body. To enhance the antidiabetic effect of GLP1, we designed a human cysteine-modified IgG1-Fc antibody-mediated oral gene delivery vehicle, which helps to produce GLP1 sustainably in the target site with the help of increased half-life of the Fc-conjugated nanocarrier, protects GLP1 from acidic and enzymatic degradation in the gastrointestinal (GI) tract, uptakes and transports the GLP1 formulation through the neonatal Fc receptor (FcRn), and helps to release the GLP1 gene in the intestine. Our formulation could reduce the blood glucose from about an average of 320 mg/dL (hyperglycemic) to 150 mg/dL (normal blood glucose concentration) in diabetic mice, which is about 50% reduction of the total blood glucose concentration. GLP1 (500 µg) complexed with the IgG1-Fc carrier was proven to be the optimal dose for a complete reduction of hyperglycemic conditions in diabetic mice. A significant amount of insulin production and the presence of GLP1 peptide were observed in the pancreatic islets of oral GLP1 formulation-treated diabetic mice in immunohistochemistry analysis compared to nontreated diabetic mice. The orally given formulation was completely nontoxic according to the histopathology analysis of mice organ tissues, and no mice death was observed. Our antibody-mediated oral gene delivery system is a promising tool for various oral therapeutic gene delivery applications to treat diseases like diabetes.

Asunto(s)

RESUMEN

Whispering gallery mode (WGM) microresonators have been used as optical sensors in fundamental research and practical applications. The majority of WGM sensors are passive resonators that require complex systems, thereby limiting their practicality. Active resonators enable the remote excitation and collection of WGM-modulated fluorescence spectra, without requiring complex systems, and can be used as alternatives to passive microresonators. This paper demonstrates an active microresonator, which is a microdisk laser in a hyperboloid-drum (HD) shape. The HD microdisk lasers are a combination of a rhodamine B-doped photoresist and a silica microdisk. These HD microdisk lasers can be utilized for the detection of label-free biomolecules. The biomolecule concentration can be as low as 1 ag mL-1 , whereas the theoretical detection limit of the biosensor for human IgG in phosphate buffer saline is 9 ag mL-1 (0.06 aM ). Additionally, the biosensors are able to detect biomolecules in an artificial serum, with a theoretical detection limit of 9 ag mL-1 (0.06 aM ). These results are approximately four orders of magnitude more sensitive than those for the typical active WGM biosensors. The proposed HD microdisk laser biosensors show enormous detection potential for biomarkers in protein secretions or body fluids.

Asunto(s)