RESUMEN

The mechanical cue of fiber alignment plays a key role in the development of various tissues in the body. The ability to study the effect of these stimuli in vitro has been limited previously. Here, we present a microfluidic device capable of intrinsically generating aligned fibers using the microchannel geometry. The device also features tunable interstitial fluid flow and the ability to form a morphogen gradient. These aspects allow for the modeling of complex tissues and to differentiate cell response to different stimuli. To demonstrate the abilities of our device, we incorporated luminal epithelial cysts into our device and induced growth factor stimulation. We found the mechanical cue of fiber alignment to play a dominant role in cell elongation and the ability to form protrusions was dependent on cadherin-3. Together, this work serves as a springboard for future potential with these devices to answer questions in developmental biology and complex diseases such as cancers.

Asunto(s)

RESUMEN

Collagen fibers in the 3D tumor microenvironment (TME) exhibit complex alignment landscapes that are critical in directing cell migration through a process called contact guidance. Previous in vitro work studying this phenomenon has focused on quantifying cell responses in uniformly aligned environments. However, the TME also features short-range gradients in fiber alignment that result from cell-induced traction forces. Although the influence of graded biophysical taxis cues is well established, cell responses to physiological alignment gradients remain largely unexplored. In this work, fiber alignment gradients in biopsy samples are characterized and recreated using a new microfluidic biofabrication technique to achieve tunable sub-millimeter to millimeter scale gradients. This study represents the first successful engineering of continuous alignment gradients in soft, natural biomaterials. Migration experiments on graded alignment show that HUVECs exhibit increased directionality, persistence, and speed compared to uniform and unaligned fiber architectures. Similarly, patterned MDA-MB-231 aggregates exhibit biased migration toward increasing fiber alignment, suggesting a role for alignment gradients as a taxis cue. This user-friendly approach, requiring no specialized equipment, is anticipated to offer new insights into the biophysical cues that cells interpret as they traverse the extracellular matrix, with broad applicability in healthy and diseased tissue environments.

RESUMEN

Semiflexible fiber gels such as collagen and fibrin have unique nonlinear mechanical properties that play an important role in tissue morphogenesis, wound healing, and cancer metastasis. Optical tweezers microrheology has greatly contributed to the understanding of the mechanics of fibrous gels at the microscale, including its heterogeneity and anisotropy. However, the explicit relationship between micromechanical properties and gel deformation has been largely overlooked. We introduce a unique gel-stretching apparatus and employ it to study the relationship between microscale strain and stiffening in fibrin and collagen gels, focusing on the development of anisotropy in the gel. We find that gels stretched by as much as 15 % stiffen significantly both in parallel and perpendicular to the stretching axis, and that the parallel axis is 2-3 times stiffer than the transverse axis. We also measure the stiffening and anisotropy along bands of aligned fibers created by aggregates of cancer cells, and find similar effects as in gels stretched with the tensile apparatus. Our results illustrate that the extracellular microenvironment is highly sensitive to deformation, with implications for tissue homeostasis and pathology. STATEMENT OF SIGNIFICANCE: The inherent fibrous architecture of the extracellular matrix (ECM) gives rise to unique strain-stiffening mechanics. The micromechanics of fibrous networks has been studied extensively, but the deformations involved in its stiffening at the microscale were not quantified. Here we introduce an apparatus that enables measuring the deformations in the gel as it is being stretched while simultaneously using optical tweezers to measure its microscale anisotropic stiffness. We reveal that fibrin and collagen both stiffen dramatically already at ∼10 % deformation, accompanied by the emergence of significant, yet moderate anisotropy. We measure similar stiffening and anisotropy in the matrix remodeled by the tensile apparatus to those found between cancer cell aggregates. Our results emphasize that small strains are enough to introduce substantial stiffening and anisotropy. These have been shown to result in directional cell migration and enhanced force propagation, and possibly control processes like morphogenesis and cancer metastasis.

Asunto(s)

RESUMEN

Parts made through additive manufacturing (AM) often exhibit mechanical anisotropy due to the time-based deposition of material and processing parameters. In polymer material extrusion (MEX), printed parts have weak points at layer interfaces, perpendicular to the direction of deposition. Poly(lactic acid) with chopped carbon fiber was printed on a large-format pellet printer at various extrusion rates with the same tool pathing to measure the fiber alignment with deposition via two methods and relate it to the ultimate tensile strength (UTS). Within a singular printed bead, an X-ray microscopy (XRM) scan was conducted to produce a reconstruction of the internal microstructure and 3D object data on the length and orientation of fibers. From the scan, discrete images were used in an image analysis technique to determine the fiber alignment to deposition without 3D object data on each fiber's size. Both the object method and the discrete image method showed a negative relationship between the extrusion rate and fiber alignment, with -34.64% and -53.43% alignment per extrusion multiplier, respectively, as the slopes of the linear regression. Tensile testing was conducted to determine the correlation between the fiber alignment and UTS. For all extrusion rates tested, as the extrusion multiplier increased, the percent difference in the UTS decreased, to a minimum of 8.12 ± 14.40%. The use of image analysis for the determination of the fiber alignment provides a possible method for relating the microstructure to the meso-property of AM parts, and the relationship between the microstructure and the properties establishes process-structure-property relationships for large-format AM.

RESUMEN

Ligaments and tendons undergo nonuniform deformation during movement. While deformations can be imaged, it remains challenging to use such information to infer regional tissue loading. Shear wave tensiometry is a promising noninvasive technique to gauge axial stress and is premised on a tensioned beam model. However, it is unknown whether tensiometry can predict regional stress in a nonuniformly loaded structure. The objectives of this study were to (1) determine whether regional shear wave speed tracks regional axial stress in nonuniformly loaded fibrous soft tissues, and (2) determine the sensitivity of regional axial stress and shear wave speed to nonuniform load distribution and fiber alignment. We created a representative set of 12,000 dynamic finite element models of a fibrous soft tissue with probabilistic variations in fiber alignment, stiffness, and aspect ratio. In each model, we applied a randomly selected nonuniform load distribution, and then excited a shear wave and tracked its regional propagation. We found that regional shear wave speed was an excellent predictor of the regional axial stress (RMSE = 0.57 MPa) and that the nature of the regional shear wave speed-stress relationship was consistent with a tensioned beam model (R2 = 0.99). Variations in nonuniform load distribution and fiber alignment did not substantially alter the wave speed-stress relationship, particularly at higher loads. Thus, these findings suggests that shear wave tensiometry could provide a quantitative estimate of regional tissue stress in ligaments and tendons.

Asunto(s)

RESUMEN

Electrospinning has been widely employed to fabricate complex extracellular matrix-like microenvironments for tissue engineering due to its ability to replicate structurally biomimetic micro- and nanotopographic cues. Nevertheless, these nanofibrous structures are typically either confined to bidimensional systems or confined to three-dimensional ones that are unable to provide controlled multiscale patterns. Thus, an electrospinning modality was used in this work to fabricate chondrocyte-laden nanofibrous scaffolds with highly customizable three-dimensional (3D) architectures in an automated manner, with the ultimate goal of recreating a suitable 3D scaffold for articular cartilage tissue engineering. Three distinct architectures were designed and fabricated by combining multiple nanofibrous and chondrocyte-laden hydrogel layers and tested in vitro in a compression bioreactor system. Results demonstrated that it was possible to precisely control the placement and alignment of electrospun polycaprolactone and gelatin nanofibers, generating three unique architectures with distinctive macroscale porosity, water absorption capacity, and mechanical properties. The architecture organized in a lattice-like fashion was highly porous with substantial pore interconnectivity, resulting in a high-water absorption capacity but a poor compression modulus and relatively weaker energy dissipation capacity. The donut-like 3D geometry was the densest, with lower swelling, but the highest compression modulus and improved energy dissipation ability. The third architecture combined a lattice and donut-like fibrous arrangement, exhibiting intermediary behavior in terms of porosity, water absorption, compression modulus, and energy dissipation capacity. The properties of the donut-like 3D architecture demonstrated great potential for articular cartilage tissue engineering, as it mimicked key topographic, chemical, and mechanical characteristics of chondrocytes' surrounding environment. In fact, the combination of these architectural features with a dynamically compressive mechanical stimulus triggered the best in vitro results in terms of viability and biosynthetic production.

Asunto(s)

RESUMEN

To align a pair of optical fibers, it is required that the micro actuators used be small and have the characteristics of high accuracy and fast response time. A trapezoidal piezoelectric bimorph actuator was proposed for pushing and pulling an optical fiber. Based on a mathematical model and finite element model established in this paper, we analyzed the output displacement and output force of the proposed trapezoidal piezoelectric actuator under the influence of structural parameters. Since the piezoelectric bimorph actuator had a hysteresis effect, we applied particle swarm optimization to establish a Prandtl-Ishlinskii (PI) model for actuator and parameter identification. Then, two control methods, namely feedforward control considering hysteresis effects and fuzzy proportional-integral-derivative (PID) control employing feedback, were proposed. Finally, a composite control model combining the two control methods with fewer tracking errors was designed. The results show that the output displacement of this actuator is larger than that of a rectangular one. Additionally, the fuzzy PID control has a lower response time (15 ms) and an overshoot (5%).

RESUMEN

BACKGROUND: Cancers aggressively reorganize collagen in their microenvironment, leading to the evasion of tumor cells from immune surveillance. However, the biological significance and molecular mechanism of collagen alignment in breast cancer (BC) have not been well established. METHODS: In this study, BC-related RNA-Seq data were obtained from the TCGA database to analyze the correlation between DDR1 and immune cells. Mouse BC cells EO771 were selected for in vitro validation, and dual-luciferase experiments were conducted to examine the effect of TFAP2A on DDR1 promoter transcription activity. ChIP experiments were performed to assess TFAP2A enrichment on the DDR1 promoter, while Me-RIP experiments were conducted to detect TFAP2A mRNA m6A modification levels, and PAR-CLIP experiments were conducted to determine VIRMA's binding to TFAP2A mRNA and RIP experiments to investigate HNRNPC's recognition of m6A modification on TFAP2A mRNA. Additionally, an in vivo mouse BC transplant model and the micro-physiological system was constructed for validation, and Masson staining was used to assess collagen fiber arrangement. Immunohistochemistry was conducted to identify the number of CD8-positive cells in mouse BC tumors and Collagen IV content in ECM, while CD8 + T cell migration experiments were performed to measure CD8 + T cell migration. RESULTS: Bioinformatics analysis showed that DDR1 was highly expressed in BC and negatively correlated with the proportion of anti-tumor immune cell infiltration. In vitro cell experiments indicated that VIRMA, HNRNPC, TFAP2A, and DDR1 were highly expressed in BC cells. In addition, HNRNPC promoted TFAP2A expression and, therefore, DDR1 transcription by recognizing the m6A modification of TFAP2A mRNA by VIRMA. In vivo animal experiments further confirmed that VIRMA and HNRNPC enhanced the TFAP2A/DDR1 axis, promoting collagen fiber alignment, reducing anti-tumor immune cell infiltration, and promoting immune escape in BC. CONCLUSION: This study demonstrated that HNRNPC promoted DDR1 transcription by recognizing VIRMA-unveiled m6A modification of TFAP2A mRNA, which enhanced collagen fiber alignment and ultimately resulted in the reduction of anti-tumor immune cell infiltration and promotion of immune escape in BC.

Asunto(s)

RESUMEN

In the tumor microenvironment (TME), collagen fibers facilitate tumor cell migration through the extracellular matrix. Previous studies have focused on studying the responses of cells on uniformly aligned or randomly aligned collagen fibers. However, the in vivo environment also features spatial gradients in alignment, which arise from the local reorganization of the matrix architecture due to cell-induced traction forces. Although there has been extensive research on how cells respond to graded biophysical cues, such as stiffness, porosity, and ligand density, the cellular responses to physiological fiber alignment gradients have been largely unexplored. This is due, in part, to a lack of robust experimental techniques to create controlled alignment gradients in natural materials. In this study, we image tumor biopsy samples and characterize the alignment gradients present in the TME. To replicate physiological gradients, we introduce a first-of-its-kind biofabrication technique that utilizes a microfluidic channel with constricting and expanding geometry to engineer 3D collagen hydrogels with tunable fiber alignment gradients that range from sub-millimeter to millimeter length scales. Our modular approach allows easy access to the microengineered gradient gels, and we demonstrate that HUVECs migrate in response to the fiber architecture. We provide preliminary evidence suggesting that MDA-MB-231 cell aggregates, patterned onto a specific location on the alignment gradient, exhibit preferential migration towards increasing alignment. This finding suggests that alignment gradients could serve as an additional taxis cue in the ECM. Importantly, our study represents the first successful engineering of continuous gradients of fiber alignment in soft, natural materials. We anticipate that our user-friendly platform, which needs no specialized equipment, will offer new experimental capabilities to study the impact of fiber-based contact guidance on directed cell migration.

RESUMEN

Artery buckling occurs due to hypertensive lumen pressure or reduced axial tension and other pathological conditions. Since arteries in vivo often experience axial twisting and the collagen fiber alignment in the arterial wall may become nonsymmetric, it is imperative to know how axial twisting and nonsymmetric collagen alignment would affect the buckling behavior of arteries. To this end, the objective of this study was to determine the effect of axial twisting and nonsymmetric collagen fiber distribution on the critical pressure of arterial bent buckling. The buckling model analysis was generalized to incorporate an axial twist angle and nonsymmetric fiber alignment. The effect of axial twisting on the critical pressure was simulated and experimentally tested in a group of porcine carotid arteries. Our results showed that axial twisting tends to reduce the critical pressure depending on the axial stretch ratio and twist angle. In addition, nonsymmetric fiber alignment reduces the critical pressure. Experimental results confirmed that a twist angle of 90° reduces the critical pressure significantly (p < 0.05). It was concluded that axial twisting and non-axisymmetric collagen fibers distribution could make arteries prone to bent buckling. These results enrich our understanding of artery buckling and vessel tortuosity. The model analysis and results could also be applicable to other fiber reinforced tubes under lumen pressure and axial twisting.

Asunto(s)

RESUMEN

Electrospinning has contributed substantially to the construction of nanofibrous scaffolds for potential tissue engineering and regenerative medicine applications. However, conventional electrospinning only has the ability to generate and collect nanofiber scaffolds with a randomly oriented fibrous pattern, which lack the necessary cell alignment guidance function. In this study, a novel electrospinning fiber-collecting device was designed and developed by setting a series of small pin-ring-structured collectors on a large plain plate. Specifically, we demonstrated that the pin-ring-structured collectors, which were constructed by inserting a metal pin into the center of a metal ring, could collect the as-electrospun nanofibers with radially oriented structures in an innovative manner. We first investigated the suitable polymeric concentration for electrospinning poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), and the optimum electrospinning concentration of PHBV was found to be 12% (w/v) PHBV dissolved in hexafluoroisopropyl alcohol (HFIP). Then, 12% (w/v) PHBV solution was electrospun into radially oriented nanofiber scaffolds using our novel electrospinning strategy, and their various performances were further compared with conventionally randomly oriented nanofiber scaffolds that were also produced from 12% (w/v) PHBV solution. The results showed that the radially oriented PHBV nanofiber scaffolds exhibited obviously enhanced mechanical properties and decreased hydrophobicity compared with the randomly oriented PHBV nanofiber scaffold controls. Importantly, the biological properties of radially oriented PHBV nanofiber scaffolds were also demonstrated to be enhanced, compared with randomly oriented PHBV nanofiber scaffolds, by effectively inducing cell alignment and significantly promoting cell proliferation. In sum, the present study indicates that our as-prepared nanofiber scaffolds with a radially oriented pattern are of great interest for advanced applications, such as wound dressings and tissue-engineered scaffolds.

RESUMEN

PURPOSE: To compare the estimation accuracy of axisymmetric diffusion kurtosis imaging (DKI) and standard DKI in combination with Rician bias correction (RBC). METHODS: Axisymmetric DKI is more robust against noise-induced variation in the measured signal than standard DKI because of its reduced parameter space. However, its susceptibility to Rician noise bias at low signal-to-noise ratios (SNR) is unknown. Here, we investigate two main questions: first, does RBC improve estimation accuracy of axisymmetric DKI?; second, is estimation accuracy of axisymmetric DKI increased compared to standard DKI? Estimation accuracy was investigated on the five axisymmetric DKI tensor metrics (AxTM): the parallel and perpendicular diffusivity and kurtosis and mean of the kurtosis tensor, using a noise simulation study based on synthetic data of tissues with varying fiber alignment and in-vivo data focusing on white matter. RESULTS: RBC mainly increased accuracy for the parallel AxTM in tissues with highly to moderately aligned fibers. For the perpendicular AxTM, axisymmetric DKI without RBC performed slightly better than with RBC. However, the combination of axisymmetric DKI with RBC was the overall best performing algorithm across all five AxTM in white matter and axisymmetric DKI itself substantially improved accuracy in axisymmetric tissues with low fiber alignment. CONCLUSION: Combining axisymmetric DKI with RBC facilitates accurate DKI parameter estimation at unprecedented low SNRs ( ≈ 15 $$ \approx 15 $$ ) in white matter, possibly making it a valuable tool for neuroscience and clinical research studies where scan time is a limited resource. The tools used here are available in the open-source ACID toolbox for SPM.

Asunto(s)

RESUMEN

One-dimensional (1D) fibers have been widely used in composites reinforcement for microwave attenuation due to their outstanding mechanical and electromagnetic properties, especially in the axial direction. However, the precise control of fiber alignment in a polymer matrix remains a challenge. In this work, we successfully demonstrated the well-controlled alignment of silicon carbide nanowires (SiCNW) in a silicone matrix by using direct ink writing (DIW)-based 3D printing. It is proven that the printed multilayer material with fiber alignment could show a dramatic improvement in both reflection loss (RL) and effective attenuation bandwidth (EAB, RL < -10 dB). In particular, a uniaxial in-plane orientation is found to be the optimal alignment among other planar and also out-of-plane orientations. Benefiting from the optimized alignment, the 3D-printed SiC composite could show an EAB (∼6.4 GHz)1.6 times broader than that of the randomly mixed composite at the same thickness without alignment, associated with a minimum RL of -48 dB at 14.3 GHz. In addition, it is demonstrated that DIW could print different materials, such as SiCNW and multiwall carbon nanotube (MWCNT), in alternating layers for multiple-frequency-band attenuation benefiting from the distinct property of each material. Considering the one-step control of fiber alignment and material selectivity, DIW could play an important role in materials design for high-efficiency microwave attenuation.

RESUMEN

Fiber-reinforced polymers are increasingly being used, especially in lightweight structures. Here, the effective adaptation of mechanical or physical properties to the necessary application or manufacturing requirements plays an important role. In this context, the alignment of reinforcing fibers is often hindered by manufacturing aspects. To achieve graded or locally adjusted alignment of different fiber lengths, common manufacturing technologies such as injection molding or compression molding need to be supported by the external non-mechanical process. Magnetic or electrostatic fields seem to be particularly suitable for this purpose. The present work shows a first simulation study of the alignment of magnetic particles in polymer matrices as a function of different parameters. The parameters studied are the viscosity of the surrounding polymer as a function of the focused processing methods, the fiber length, the thickness and permeability of the magnetic fiber coatings, and the magnetic flux density. The novelty of the presented works is in the development of an advanced simulation model that allows the simulative representation and reveal of the fluid-structure interaction, the influences of these parameters on the inducible magnetic torque and fiber alignment of a single fiber. Accordingly, the greatest influence on fiber alignment is caused by the magnetic flux density and the coating material.

RESUMEN

Cyclic strain avoidance, the phenomenon of cell and cytoskeleton alignment perpendicular to the direction of cyclic strain of the underlying 2D substrate, is an important characteristic of the adherent cell organization. This alignment has typically been attributed to the stress-fiber reorganization although observations clearly show that stress-fiber reorganization under cyclic loading is closely coupled to cell morphology and reorientation of the cells. Here, we develop a statistical mechanics framework that couples the cytoskeletal stress-fiber organization with cell morphology under imposed cyclic straining and make quantitative comparisons with observations. The framework accurately predicts that cyclic strain avoidance stems primarily from cell reorientation away from the cyclic straining rather than cytoskeletal reorganization within the cell. The reorientation of the cell is a consequence of the cell lowering its free energy by largely avoiding the imposed cyclic straining. Furthermore, we investigate the kinetics of the cyclic strain avoidance mechanism and demonstrate that it emerges primarily due to the rigid body rotation of the cell rather than via a trajectory involving cell straining. Our results provide clear physical insights into the coupled dynamics of cell morphology and stress-fibers, which ultimately leads to cellular organization in cyclically strained tissues.

RESUMEN

3D printing of fiber-reinforced composites is expected to be the forefront technology for the next-generation high-strength, high-toughness, and lightweight structural materials. The intrinsic architecture of 3D-printed composites closely represents biomimetic micro/macrofibril-like hierarchical structure composed of intermediate filament assembly among the micron-sized reinforcing fibers, and thus contributes to a novel mechanism to simultaneously improve mechanical properties and structural features. Notably, it is found that an interfacial heterogeneity between numerous inner interfaces in the hierarchical structure enables an exceptional increase in the toughness of composites. The strong interfacial adhesion between the fibers and matrix, with accompanying the inherently weak interfacial adhesion between intermediate filaments and the resultant interfacial voids, provide a close representation of the toughness behavior of natural architectures relying on the localized heterogeneity. Given the critical embedment length of fiber reinforcement, extraordinary improvement has been attained not only in the strength but also in toughness taking advantage of the synergy effect from the aforementioned nature-inspired features. Indeed, the addition of a small amount of short fiber to the brittle bio-filaments results in a noticeable increase of more than 200% in the tensile strength and modulus with further elongation increment. This article highlights the inherent structural hierarchy of 3D-printed composites and the relevant sophisticated mechanism for anomalous mechanical reinforcement.

Asunto(s)

RESUMEN

Despite the numerous attempts in nerve tissue engineering, no ideal strategy has been translated into effective therapy for neuronal regeneration yet. Here, we designed a novel nerve regeneration scaffold combining aligned laminin-immobilized polyethersulfone (PES) nanofibers and human-induced pluripotent stem cells (hiPSCs) for transplantation strategies. Aligned and random PES nanofibers were fabricated by electrospinning method with a diameter of 95-500 nm and were then modified with covalent laminin bounding subsequent to O2 plasma treatment. PES-functionalized fibers found to induce a remarkable higher rate of neuronal genes expression as compared to nontreated group. In addition, hiPSCs cultured on aligned pure fibers exhibited the extension of neurites along with fibers direction and an exponentially elevated expression of neuron specific enolase (early neuroectoderm marker), Tuj-1 (axonal marker), and microtubule-associated protein 2 (dendritic marker) in comparison with random pure fibers. The concomitant of increased hydrophilicity and biocompatibility along with exploiting topographical cues and directional guidance make aligned PES-plasma-laminin a versatile scaffold for adhesion, proliferation, spreading, and differentiation of hiPSCs into nerve cells.

Asunto(s)

RESUMEN

Electrospinning is a promising method to fabricate bioengineered scaffolds, thanks to utilizing various types of biopolymers, flexible structures, and also the diversity of output properties. Mechanical properties are one of the major components of scaffold design to fabricate an efficacious artificial substitute for the natural extracellular matrix. Additionally, fiber orientations, as one of the scaffold structural parameters, could play a crucial role in the application of fabricated fibrous scaffolds. In this study, gelatin was used as a highly biocompatible polymer in blend with cellulose acetate (CA), a polysaccharide, to enhance the achievable range of mechanical characteristics to fabricated fibrous electrospun scaffolds. By altering input variables, such as polymers concentration, weight ratio, and mandrel rotation speed, scaffolds with various mechanical and morphological properties could be achieved. As expected, the electrospun scaffold with a higher mandrel rotation speed shows higher fiber alignment. A wide range of mechanical properties were gained through different values of polymer ratio and total concentration. A general improvement in mechanical strength was observed by increasing the concentration and CA content in the solution, but contradictory effects, such as high viscosity in more concentrated solutions, influenced the mechanical characteristics as well. A response surface method was applied on experimental results in order to describe a continuous variation of Young's modulus, yield stress, and strain at rupture. A full quadratic version of equations with the 95% confidence level was applied for the response modeling. This model would be an aid for engineers to adjust mandrel rotation speed, solution concentration, and gelatin/CA ratio to achieve desired mechanical and structural properties.

RESUMEN

Fiber constructed yarns are the elementary building blocks for the generation of implantable biotextiles, and there are always needs for designing and developing new types of yarns to improve the properties of biotextile implants. In the present study, we aim to develop novel nanofiber yarns (NYs) by combining nanostructure that more closely mimic the extracellular matrix fibrils of native tissues with biodegradability, strong mechanical properties and great textile processibility. A novel electrospinning system which integrates yarn formation with hot drawing process was developed to fabricate poly(L-lactic acid) (PLLA) NYs. Compared to the PLLA NYs without hot drawing, the thermally drawn PLLA NYs presented superbly-orientated fibrous structure and notably enhanced crystallinity. Importantly, they possessed admirable mechanical performances, which matched and even exceeded the commercial PLLA microfiber yarns (MYs). The thermally drawn PLLA NYs were also demonstrated to notably promote the adhesion, alignment, proliferation, and tenogenic differentiation of human adipose derived mesenchymal stem cells (hADMSCs) compared to the PLLA NYs without hot drawing. The thermally drawn PLLA NYs were further processed into various nanofibrous tissue scaffolds with defined structures and adjustable mechanical and biological properties using textile braiding and weaving technologies, demonstrating the feasibility and versatility of thermally drawn PLLA NYs for textile-forming utilization. The hADMSCs cultured on PLLA NY-based textiles presented enhanced attachment and proliferation capacities than those cultured on PLLA MY-based textiles. This work presents a facile technique to manufacture high performance PLLA NYs, which opens up opportunities to generate advanced nanostructured biotextiles for surgical implant applications.

Asunto(s)

RESUMEN

Tendon being a hypocellular, low vascularized tissue often requires assistance for restoration after complete tear. Tendon tissue engineering aims in the development of suitable scaffold that could support the regeneration of tendon after damage. The success of such scaffolds is dependent on its integration with the native tissue which in turn is influenced by the cell-material interaction. In this work aligned poly(ε-caprolactone)/collagen (PCL/collagen) multiscale fibers were developed and plasma treatment using argon, nitrogen and its combination was accessed for inducing tenogenic differentiation in mesenchymal stem cells. The developed fibers mimicked tendon extracellular matrix (ECM) which upon plasma treatment maintained moderate hydrophilicity. Oxygen and nitrogen containing groups were observed to be incorporated after argon and nitrogen treatment respectively. Statistically significant (p < 0.001) enhancement was observed in average and root mean square (RMS) roughness after plasma treatment with the maximum in argon treated fibers. Vitronectin was competitively (statistically significant, p < 0.05) adsorbed after argon and combination treatment whereas nitrogen treatment led to the competitive adsorption of fibronectin (statistically significant, p < 0.05). Human mesenchymal stem cells (hMSCs) showed enhanced proliferation and attachment on plasma treated fibers. Increased porosity due to the presence of sacrificial collagen nanofibers improved cell infiltration which was further enhanced upon plasma treatment. RhoA activation was observed (statistically significant, p < 0.05) on aligned PCL/collagen multiscale fibers and PCL microfibers, which proved its impact on tenogenic differentiation. Further enhancement in rhoA expression was observed on argon (p < 0.01) and combination plasma (p < 0.05) treated fibers. Tenogenic differentiation of hMSCs was enhanced (statistically significant) on argon plasma treated aligned fibers which was confirmed by the expression of scleraxis, mohawk (early markers) and tenomodulin (late marker) at protein level and mohawk, collagen I, collagen III (early markers), thrombospondin 4 and tenascin C (late markers) at gene level. Thus argon plasma treatment on aligned fibers is an effective method to induce tenogenesis even in non-tenogenic media.

Asunto(s)