RESUMEN

With the aim of expanding the potential application scope of mulberries, eleven pH-switchable deep eutectic solvents were screened for the ultrasonic-assisted extraction of mulberry polysaccharides, and a salt/salt aqueous two-phase system was constructed for the efficient separation of mulberry polysaccharides by regulating the system pH. DES-9 (tetraethylammonium chloride: octanoic acid molar ratio = 1: 2) with a critical response pH value of approximately 6.1 was concluded to be the best extraction solvent for extracting mulberry polysaccharides. A maximum polysaccharide extraction yield of 270.71 mg/g was obtained under the optimal conditions. The maximum polysaccharide extraction efficiency was 78.09 % for the pH-driven tetraethylammonium chloride/K2HPO4 aqueous two-phase system. An acidic ß-pyran mulberry polysaccharide with a low-molecular weight of 9.26 kDa and a confirmed monosaccharide composition were obtained. This efficient and environmentally friendly polysaccharide separation method offers a new approach for the efficient extraction and utilization of other plant polysaccharides.

Asunto(s)

RESUMEN

Food waste, accounting for about one-third of the total global food resources wasted each year, is a substantial challenge to global sustainability, contributing to adverse environmental impacts. The utilization of food waste as a valuable source for bioactive extraction can be facilitated through the application of DES (Deep Eutectic Solvents). Acknowledging the significant need to tackle this issue, the United Nations integrated food waste management into its Sustainable Development Goals, hence, the present review explores the role of DES in bioactive compounds extraction from food waste. Various extraction processes using the DES system are thoroughly studied and the application of bioactive components as antioxidants, antimicrobials, flavourings, nutraceuticals, functional ingredients, additives, and preservatives is investigated. Most importantly, regulatory considerations and safety aspects of DES in food applications are discussed in-depth along with consumer perception and acceptance of DES in the food sector. The key hypothesis of the review is to evaluate emerging DES systems for their efficiency in bioactive extraction technologies and various food applications. Overall, this review provides a comprehensive understanding of utilizing DES for synthesizing valuable food waste-derived bioactive components, offering a sustainable approach to waste management and the development of high-value products.

Asunto(s)

RESUMEN

Innately designed to induce physiological changes, pharmaceuticals are foreknowingly hazardous to the ecosystem. Advanced oxidation processes (AOPs) are recognized as a set of contemporary and highly efficient methods being used as a contrivance for the removal of pharmaceutical residues. Since reactive oxygen species (ROS) are formed in these processes to interact and contribute directly toward the oxidation of target contaminant(s), a profound insight regarding the mechanisms of ROS leading to the degradation of pharmaceuticals is fundamentally significant. The conceptualization of some specific reaction mechanisms allows the design of an effective and safe degradation process that can empirically reduce the environmental impact of the micropollutants. This review mainly deliberates the mechanistic reaction pathways for ROS-mediated degradation of pharmaceuticals often leading to complete mineralization, with a focus on acetaminophen as a drug waste model.

Asunto(s)

RESUMEN

Utilizing the thermogalvanic effect, flexible thermoelectric materials present a compelling avenue for converting heat into electricity, especially in the context of wearable electronics. However, prolonged usage is hampered by the limitation imposed on the thermoelectric device's operational time due to the evaporation of moisture. Deep eutectic solvents (DESs) offer a promising solution for low-moisture gel fabrication. In this study, a bacterial cellulose (BC)/polyacrylic acid (PAA)/guanidinium chloride (GdmCl) gel is synthesized by incorporating BC into the DES. High-performance n-type and p-type thermocells (TECs) are developed by introducing Fe(ClO4)2/3 and K3/4Fe(CN)6, respectively. BC enhances the mechanical properties through the construction of an interpenetrating network structure. The coordination of carboxyl groups on PAA with Fe3+ and the crystallization induced by Gdm+ with [Fe(CN)6]4- remarkably improve the thermoelectric performance, achieving a Seebeck coefficient (S) of 2.4 mV K-1 and ion conductivity (σ) of 1.4 S m-1 for the n-type TEC, and ‒2.8 mV K-1 and 1.9 S m-1 for the p-type TEC. A flexible wearable thermoelectric device is fabricated with a S of 82 mV K-1 and it maintains a stable output over one month. This research broadens the application scope of DESs in the thermoelectric field and offers promising strategies for long-lasting wearable energy solutions.

RESUMEN

The present study aims at investigating the application of ultrasound assisted choline chloride (ChCl) - formic acid (FA) deep eutectic solvent (DES) pretreatment of Barley straw. In addition, the efficiency of a wet grinding followed by high intensity ultrasound (HIUS) treatment for production of cellulose nanofibers (CNF) has been evaluated. The DES (using ChCl: FA at 1:9 M ratio) treatment at 45 kHz ultrasound frequency and 3 h of treatment duration resulted in 84.68 ± 1.02 % and 82.96 ± 0.79 % of lignin and hemicellulose solubilisation, respectively. The purification of DES treated solid residue resulted in cellulose with more than 90 % purity. Further, 10 min of wet grinding followed by 40 min of HIUS treatment resulted in more than 80 % nano-fibrillation efficiency. The produced CNF had diameters less than 100 nm in number size distribution and type I cellulose structure. This study confirmed that the developed process offers a sustainable method for producing nanocellulose from agricultural waste.

Asunto(s)

RESUMEN

Organophosphorus pesticides (OPPs) are a group of pesticides that are most widely used in the agricultural sector, and farmers are exposed to these chemicals more than other members of society. In this work, an environmentally friendly, simple, and safe ultrasound-assisted dispersive liquid-liquid microextraction (USA-DLLME) method using alcohol-based hydrophobic deep eutectic solvents (HDESs) followed by gas chromatography-mass spectroscopy (GC-MS) was developed for the extraction and determination of OPPs in the blood of farmers studied in Ravansar cohort. DESs synthesized from thymol as hydrogen bond donor (HBD) and aliphatic alcohols as hydrogen bond acceptor (HBA) have been used as extractants. Under optimal experimental conditions, the reproducibility of the method based on 7 replicate measurements of 10 µg L-1 of OPPs in blood samples was in the range of 1.4-3.8%. The method showed a linearity in the range of 0.01-150 µg L-1. The limits of detection and limits of quantification were between 0.003 and 0.02 µg L-1 and 0.01-0.05 µg L-1, respectively. The matrix effect and accuracy of the method were confirmed by spiking different amounts of OPPs in real blood samples and obtaining relative recoveries in the range of 91-112%. The results showed that the concentration of OPPs in the case group was significantly higher than in the control group, which is because the case group was exposed to OPPs during the spraying of agricultural products.

RESUMEN

Aflatoxins pose a major health concern and require strict monitoring in food products. Existing methods rely on hazardous organic solvents for extraction, prompting the development of a greener alternative. This study explores deep eutectic solvents (DESs) for aflatoxin extraction from pistachios, a valuable food product prone to aflatoxin contamination. The proposed method utilizes DES extraction followed by solid-phase extraction cleanup and ultrahigh-performance liquid chromatography coupled with fluorescence detector analysis. Recovery rates ranged from 85.5 to 99.1% for pistachios spiked with 1-8 ng/g aflatoxins, in compliance with EU regulations, with coefficients of variation less than 2.94%. The method demonstrates good sensitivity with limits of detection and quantification in the range of 0.02-0.22 ng/g and 0.05-0.72 ng/g, respectively. Greenness assessment using AGREEPrep and White Analytical Chemistry metrics confirms its environmental sustainability. This approach offers a promising, safer, and more eco-friendly alternative for aflatoxin extraction from complex food matrices like pistachios.

Asunto(s)

RESUMEN

Natural deep eutectic solvents (NADESs) showing higher cryoprotective effects are attracting concerns, because during the storage, system browning always occurs in aldose/amino acid-based NADESs, which generated brown substances remarkably weaken the cryoprotective effects. In this study, proline/glucose-based (PG) and proline/sorbitol-based (PS) NADESs were prepared, of which storage stability, browning profile, brown substance, and cryoprotective effects were investigated. Results showed that PG at molar ratios of 1:1, 2:1, and 3:1, as well as PS at 1:1, and 2:1 can form NADESs, among which only the PG-based ones could get browning after storage. The predominant brown substance was identified as 1-deoxy-1-L-proline-d-fructose (C11H19O7N, 278 m/z), which was subsequently verified to show cytotoxicity and decrease Saccharomyces cerevisiae cells viability after cryopreservation, suggesting that the brown substance could take a negative effect on cryopreservation. This study may help to attract more concerns to the storage and cryopreservation stabilities of the NADESs in food-related applications.

Asunto(s)

RESUMEN

Traditional pectin extraction methods involve strong acids, which are environmentally harmful. This study explores an innovative approach using Malonic Acid (MA)-based Deep Eutectic Solvents (DES) to extract pectin from Artocarpus integer Peel (AIPP), optimised through Response Surface Methodology (RSM). The extracted AIPP-A and AIPP-B from ChCl-MA and ChDHCit-MA DES, respectively, were characterised for yield, pH, solubility, Degree of Esterification (DE), Water and Oil Holding Capacity (WHC and OHC). The experimental values aligned with RSM model predictions, with low standard deviations: 0.7300 for ChCl-MA and 0.1531 for ChDHCit-MA. Optimal extraction conditions for AIPP-A were 3.27 % ChCl-MA, 1.28 h extraction time, 50.44 °C temperature, and a 1:40 g/mL solid-to-liquid ratio. For AIPP-B, the conditions were 4.95 % ChDHCit-MA, 2.04 h extraction time, 79.65 °C temperature, and a 1:50 g/mL solid-to-liquid ratio. ChCl-MA yielded 30.97 % AIPP, which was higher than that of ChDHCit-MA (27.99 %). Both AIPP demonstrated desirable properties such as low pH, high solubility, and significant DE. AIPP-A exhibited a greater DE (58.40 %) compared to AIPP-B (32.4 %) contributed to its lower WHC and higher OHC. In conclusion, RSM-based optimisation of AIPP extraction with DES is effective in producing pectin that is suitable for use as a gelling agent, preservative, and stabiliser in the food industry.

RESUMEN

Electrosynthesis is a technique that is attracting increased attention and has many appealing features, particularly its potential greenness. At the same time, electrosynthesis requires a solvent and a supporting electrolyte in order for current to pass through the reaction. These are effectively consumable reagents unless a convenient means of recycling can be developed. As part of our interest in unusual solvents and electrochemistry, we explored the application of simple, inexpensive, and recyclable deep eutectic solvents to the allylation of carbonyls. While several sets of conditions were developed, the goal of avoiding stoichiometric amounts of metal has proven elusive. Still, a deep eutectic solvent can be used to plate out and thus recover the metal used, offering an interesting new option for electrochemical allylations.

RESUMEN

In this study, a simple, sensitive, and rapid method called green hydrophobic deep eutectic solvent-based liquid-liquid microextraction was developed to extract Brilliant Blue FCF dye from beverages. This method utilizes hydrophobic DES obtained by forming tetrabutylammonium bromide and 1-octanol in a 1:5 ratio as green extraction solvent. The transition of Brilliant Blue FCF to the DES phase occurred on its own, without the need for any reagents such as added salt or tetrahydrofuran. Several crucial factors were tried to get the best extraction efficiency, including species, DES volume and molar ratio, solution pH, ultrasonication, and centrifugation time. Under optimum conditions, extraction recoveries were achieved in the range of 95.1-101.3 % with the method developed for Brilliant Blue FCF. The detection and determination limits were observed to be 4.1 µg l-1 and 12.1 µg l-1, respectively. In addition, the relative standard deviation values for the method's accuracy were found to be 2.23 % and 3.48 % within and between days, respectively. It has been established that the developed method is highly environmentally friendly thanks to the application of the Analytical GREENness (AGREE) and Green Analytical Procedure Index (GAPI) tools. This study shows that DES applications can be carried out without the use of emulsifiers and dispersants by prioritizing the use of hydrophobic DES compounds as environmentally friendly and green extraction solvents in food samples.

RESUMEN

Aqueous Zn-ion batteries (ZIBs) have attracted attention for grid applications due to their cost-effectiveness and high security. However, their lifespan decreases at high temperatures due to declining interfacial stability and increased side reactions. To address these challenges, a ternary deep eutectic solvent-based flexible electrolyte, comprised of ZnClO4·6H2O, butanedinitrile (BD), and LiCl in an amphoteric polymer matrix, was developed to enable wide-temperature ZIBs working from -20 °C to 70 °C. The interactions among BD, Li+, and zinc hydrate alongside the amphoteric groups on the polyelectrolyte matrix could effectively suppress the interfacial side reactions and Zn dendrites formation. Consequently, the symmetric Zn cell demonstrates exceptional stability across a wide-temperature range, with the ability to survive up to 2780 hours (1 mA·cm-2) at 50 °C. Furthermore, the flexible Zn||PANI battery can operate stably over 1000 cycles at 50 °C, boasting an initial specific capacity of 124.8 mAh·g-1 and capacity retention rate of 87.9% (3 A·g-1). This work presents an effective strategy for designing high-stability energy storage devices with excellent security features that can function reliably across diverse temperature conditions.

RESUMEN

We propose a soft electromagnetic sliding actuator that provides various planar motions to construct highly compliant actuation systems. The actuator is composed of a fully soft actuation base (stator) for generating electromagnetic and magnetic forces and a rigid neodymium magnet (slider) that slides on the actuation base. A parallel liquid-metal coil array in the stator is designed based on theoretical modeling and an optimization process to maximize the electromagnetic field density. The stretchable magnetic components in the stator allow the slider to retain its position stably without additional constraints. By incorporating an untethered structure in which the slider is mechanically decoupled from the stator, the actuator can be operated with reduced power consumption, attributed to the absence of a restoring force. The trajectory of the slider can be programmed by selectively applying the input current to the liquid-meal coil array, and the location of the slider can be estimated by measuring the change in inductance of each coil. Moreover, the proposed actuator demonstrates the capability of operating on curved surfaces through its physical compliance as well as on inclined surfaces thanks to the holding force generated by the magnetic components of the stator. Taking advantage of the unique characteristics of our actuator, robotic applications, including shape morphing systems and sensor-actuator integrated systems, are demonstrated.

RESUMEN

Flexible electronic sensing and energy storage technology impose heightened demands on the mechanical and stable properties of gel electrolyte materials. Lignocellulosic nanofiber (LCNF) present a promising avenue for improving the properties of electrolyte networks and mechanical strength. In this study, LCNF derived from hemp fibers was prepared using lactic acid/choline chloride deep eutectic solvent (DES) through a combination of cooking and colloid mill mechanical treatment to achieve nanocellulose with a high aspect ratio and uniform dimensions. The outcomes demonstrated that LCNF, a width of below 20 nm and a length of over 5 µm, can be effectively produced through the DES cooking pretreatment in conjunction with colloid mill mechanical treatment. Meanwhile, DES lignin possessed a purity of ∼90 % and was obtained as a by-product. Subsequently, the as-prepared LCNF was integrated as a nanofiller into gel electrolyte. Ag-L NPs/LCNF/DES/PAA exhibited dense porous structures and showcased exceptional properties, including a high conductivity exceeding 10 mS/cm and remarkable adhesion strength surpassing 100 KPa. The presence of LCNF allowed Ag-L NPs/LCNF/DES/PAA to achieve strains above 1000 % and compression properties over 1000 KPa. The supercapacitor based on this assembly had a high specific capacitance of 271 F g-1 at 0.5 A g-1), along with an impressive capacity retention rate reaching ∼100 % after 3000 cycles. This investigation offers valuable insights into the utilization of lignocellulosic multi-component approaches in the development of flexible electronic devices.

RESUMEN

Li-O2 batteries (LOBs) have gained widespread recognition for their exceptional energy densities. However, a major challenge faced by LOBs is the lack of appropriate electrolytes that can effectively balance reactant transport, interfacial compatibility, and non-volatility. To address this issue, a novel supramolecular deep eutectic electrolyte (DEE) has been developed, based on synergistic interaction between Li-bonds and H-bonds through a combination of lithium salt (LiTFSI), acetamide (Ace) and boric acid (BA). The incorporation of BA serves as an interface modification additive, acting as both Li-bonds acceptor and H-bonds donor/acceptor, thereby enhancing the redox stability of the electrolyte, facilitating a solution phase discharge process and improving compatibility with the Li anode. Our proposed DEE demonstrates a high oxidation voltage of 4.5 V, an ultrahigh discharge capacity of 15225 mAh g-1 and stable cycling performance of 196 cycles in LOBs. Additionally, the intrinsic non-flammability and successful operation of a Li-O2 pouch cell indicate promising practical applications of this electrolyte. This research broadens the design possibilities for LOBs electrolytes and provides theoretical insights for future studies.

RESUMEN

This study evaluated the ability of triethyl benzyl ammonium chloride/lactic acid deep eutectic solvent extracted lignin (TEBAC/LA-DES-L) to adsorb methylene blue (MB) without additional functional group modification. The structure and morphology of TEBAC/LA-DES-L were characterized using SEM, BET, FT-IR, and TGA techniques. Various factors influencing MB adsorption, such as extraction temperature, solution pH, adsorbent dose, initial MB concentration, adsorption time, and reaction temperature, were investigated. The Redlich-Peterson isotherm displayed a good fit for the experimental data, with a maximum adsorption capacity of 85.16 mg/g. Kinetic analysis suggested that the adsorption process followed the pseudo-second-order model, with adsorption occurring in <100 min on DES-L-4 h. The mechanism of MB adsorption on DES-L-4 h was attributed to electrostatic attraction, hydrophobic interactions, and hydrogen bonding forces. Overall, DES-L-4 h demonstrated high adsorption capacity and rapid adsorption rate, making it a promising adsorbent for effectively removing cationic dyes from wastewater.

RESUMEN

Biomass pretreatment and conversion are crucial for sustainable development, but lack information on equipment that ensures effective mass transfer and easy biomass separation post-process. This work introduces a novel basket reactor with a stationary bed (StatBioChem) for biomass processing using deep eutectic solvents (DESs). We compared the delignification efficiencies of soft and hard biomass samples processed in the StatBioChem reactor, a stirred tank reactor (STR), and a commercial SpinChem® reactor. The StatBioChem design allowed DES to flow evenly through biomass in the basket, achieving the highest delignification degree, particularly for hard biomass. This effect was not observed in the SpinChem® basket reactor. High delignification led to increased glucose yields in subsequent enzymatic hydrolysis. The StatBioChem effectively combines the simplicity and efficiency of an STR with the ease of solvent recovery typical of basket reactors.

RESUMEN

Understanding intermolecular interactions is important for the design of deep eutectic solvents. Herein, potassium carbonate (K2CO3) and ethylene glycol (EG) are used to form deep eutectic solvents. The interactions between K2CO3 and EG are studied using nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectra. Interestingly, the interaction results indicate that the carbonate anion CO32- can react with EG to form EG-based organic carbonate, which can occur even at room temperature. The possible reaction steps between K2CO3 and EG are presented. As K2CO3 can be prepared from CO2 and KOH, the findings of this work may provide a promising strategy for CO2 capture and conversion.

RESUMEN

Binary terpenoid-based eutectic systems consisting of the natural substances camphene (CA), fenchol (FE), thymol (TH), menthol (ME), dodecanoic acid (DA), and 1-dodecanol (DO) are synthesized and screened for their Solid-Liquid Equilibrium (SLE) and eutectic compositions. Out of nine eutectic systems, 13 solvent compositions at eutectic points and next to them, in addition to the reference solvent, TH:ME, are synthesized and applied for the solvent extraction of the aromatic aldehydes vanillin (VAN), syringaldehyde (SYR), and p-hydroxybenzaldehyde (HYD) from an acidic aqueous model solution. The extraction efficiency is determined from aldehyde concentrations measured by High-Performance Liquid Chromatography (HPLC), taking into consideration mutual solubility measured by Karl Fischer titration (KF) and a Total Organic Carbon-analysis (TOC). Physicochemical properties, such as the density, viscosity, and stability of the solvents, are evaluated and discussed. Additionally, 1H-NMR measurements are performed to verify hydrogen bonding present in some of the solvents. The results show that all synthesized eutectic systems have a strong hydrophobic character with a maximum water saturation of ≤2.21 vol.% and solvent losses of ≤0.12 vol.% per extraction step. The hydrophobic eutectic solvents based on CA exhibit lower viscosities, lower mutual solubility, and lower extraction efficiency for the aromatic aldehydes when compared with FE-based solvents. The highest extraction efficiencies for VAN (>95%) and for SYR (>93%) at an extraction efficiency of 92.61% for HYD are achieved by the reference solvent TH:ME (50:50 mol.%). With an extraction efficiency of 93.08%, HYD is most preferably extracted by the FE-DO-solvent (80:20 mol.%), where the extraction efficiencies for VAN and SYR reach their maximum at 93.37% and 90.75%, respectively. The drawbacks of the high viscosities of 34.741 mPas of the TH:ME solvent and 31.801 mPas of the FE-DO solvent can be overcome by the CA-TH solvent, which has a viscosity of 3.436 mPas, while exhibiting extraction efficiencies of 71.92% for HYD, >95% for VAN, and >93% for SYR, respectively.

RESUMEN

In recent years, flexible sensors constructed mainly from hydrogels have received increasing attention. However, conventional hydrogels need to be prepared by high-temperature or radiation-induced polymerization reactions, which limits their practical applications due to their suboptimal electrical conductivity and weak mechanical properties. In this paper, using sodium lignosulfonate as the raw material, a dynamic catechol-quinone redox system formed by lignin­zinc ions was constructed to initiate rapid free radical polymerization of acrylamide (AM) monomer at room temperature. In addition, Deep eutectic solvent (DES) can form a strong hydrogen bonding network within the molecules and between the molecules of the hydrogel, resulting in a hydrogel with good tensile properties (hydrogel elongation at break of 727.19 %, breaking strength of 84.09 kPa), and provides the hydrogel with high electrical conductivity, anti-dehydration, anti-freezing, and anti-bacterial properties. Meanwhile, the addition of lignin also improved the adhesion and UV resistance of the hydrogel. This hydrogel assembled into a flexible sensor can sense various small and large amplitude movements such as nodding, smiling, frowning, etc., and has a wide range of applications in flexible sensors.