RESUMEN

Significance: Cerebral blood flow (CBF) imaging is crucial for diagnosing cerebrovascular diseases. However, existing large neuroimaging techniques with high cost, low sampling rate, and poor mobility make them unsuitable for continuous and longitudinal CBF monitoring at the bedside. Aim: This study aimed to develop a low-cost, portable, programmable scanning diffuse speckle contrast imaging (PS-DSCI) technology for fast, high-density, and depth-sensitive imaging of CBF in rodents. Approach: The PS-DSCI employed a programmable digital micromirror device (DMD) for remote line-shape laser (785 nm) scanning on tissue surface and synchronized a 2D camera for capturing boundary diffuse laser speckle contrasts. New algorithms were developed to address deformations of line-shape scanning, thus minimizing CBF reconstruction artifacts. The PS-DSCI was examined in head-simulating phantoms and adult mice. Results: The PS-DSCI enables resolving Intralipid particle flow contrasts at different tissue depths. In vivo experiments in adult mice demonstrated the capability of PS-DSCI to image global/regional CBF variations induced by 8% CO2 inhalation and transient carotid artery ligations. Conclusions: Compared to conventional point scanning, the line scanning in PS-DSCI significantly increases spatiotemporal resolution. The high sampling rate of PS-DSCI is crucial for capturing rapid CBF changes while high spatial resolution is important for visualizing brain vasculature.

RESUMEN

Functional magnetic resonance imaging (fMRI) with optogenetic neural manipulation is a powerful tool that enables brain-wide mapping of effective functional networks. To achieve flexible manipulation of neural excitation throughout the mouse cortex, we incorporated spatiotemporal programmable optogenetic stimuli generated by a digital micromirror device into an MRI scanner via an optical fiber bundle. This approach offered versatility in space and time in planning the photostimulation pattern, combined with in situ optical imaging and cell-type-specific or circuit-specific genetic targeting in individual mice. Brain-wide effective connectivity obtained by fMRI with optogenetic stimulation of atlas-based cortical regions is generally congruent with anatomically defined axonal tracing data but is affected by the types of anesthetics that act selectively on specific connections. fMRI combined with flexible optogenetics opens a new path to investigate dynamic changes in functional brain states in the same animal through high-throughput brain-wide effective connectivity mapping.

Asunto(s)

RESUMEN

Fast reconstruction of holographic and diffractive optical elements (DOE) can be implemented by binary digital micromirror devices (DMD). Since micromirrors of the DMD have two positions, the synthesized DOEs must be binary. This work studies the possibility of improving the method of synthesis of amplitude binary inline Fresnel holograms in divergent beams. The method consists of the modified Gerchberg-Saxton algorithm, Otsu binarization and direct search with random trajectory technique. To achieve a better quality of reconstruction, various binarization methods were compared. We performed numerical and optical experiments using the DMD. Holograms of halftone image with size up to 1024 × 1024 pixels were synthesized. It was determined that local and several global threshold methods provide the best quality. Compared to the Otsu binarization used in the original method of the synthesis, the reconstruction quality (MSE and SSIM values) is improved by 46% and the diffraction efficiency is increased by 27%.

RESUMEN

Localized actuation is an important goal of nanotechnology broadly impacting applications such as programmable materials, soft robotics, and nanolithography. Despite significant recent advances, actuation with high temporal and spatial resolution remains challenging to achieve. Herein, we demonstrate strongly localized photoactuation of polymer pens made of polydimethylsiloxane (PDMS) and surface-functionalized short carbon nanotubes based on a fundamental understanding of the nanocomposite chemistry and device innovations in directing intense light with digital micromirrors to microscale domains. We show that local illumination can drive a small group of pens (3 × 3 over 170 µm × 170 µm) within a massively two-dimensional array to attain an out-of-plane motion by more than 7 µm for active molecular printing. The observed effect marks a striking three-order-of-magnitude improvement over the state of the art and suggests new opportunities for active actuation.

RESUMEN

Adulterations of olive oil are performed by adding seed oils to this high-quality product, which are cheaper than olive oils. Food safety controls have been established by the European Union to avoid these episodes. Most of these methodologies require expensive equipment, time-consuming procedures, and expert personnel to execute. Near-infrared spectroscopy (NIRS) technology has many applications in the food processing industry. It analyzes food safety and quality parameters along the food chain. Using principal component analysis (PCA), the differences and similarities between olive oil and seed oils (sesame, sunflower, and flax oil) have been evaluated. To quantify the percentage of adulterated seed oil in olive oils, partial least squares (PLS) have been employed. A total of 96 samples of olive oil adulterated with seed oils were prepared. These samples were used to build a spectra library covering various mixtures containing seed oils and olive oil contents. Eighteen chemometric models were developed by combining the first and second derivatives with Standard Normal Variable (SNV) for scatter correction to classify and quantify seed oil adulteration and percentage. The results obtained for all seed oils show excellent coefficients of determination for calibration higher than 0.80. Because the instrumental aspects are not generally sufficiently addressed in the articles, we include a specific section on some key aspects of developing a high-performance and cost-effective NIR spectroscopy solution for fraud detection in olive oil. First, spectroscopy architectures are introduced, especially the Texas Instruments Digital Light Processing (DLP) technology for spectroscopy that has been used in this work. These results demonstrate that the portable prototype can be used as an effective tool to detect food fraud in liquid samples.

Asunto(s)

RESUMEN

All-inorganic cesium lead halide perovskite quantum dots (QDs) have several potential applications, owing to their unique optical and electronic properties. However, patterning perovskite QDs using conventional methods is difficult because of the ionic nature of QDs. Here, we demonstrate a unique approach, in which perovskite QDs are patterned in polymer films through the photocuring of monomers under patterned light illumination. The pattern illumination creates the transient polymer concentration difference, which drives the QDs to form patterns; hence controlling polymerization kinetics is essential for the generation of the QD pattern. For the patterning mechanism, a light projection system equipped with a digital micromirror device (DMD) is developed; thus, light intensity, an important factor to determine polymerization kinetics, is precisely controlled per position on the photocurable solution, resulting in the understanding of the mechanism and the formation of distinct QD patterns. The demonstrated approach assisted by the DMD-equipped projection system can form desired perovskite QD patterns solely by patterned light illumination, paving the way for the development of patterning methods for perovskite QDs and other nanocrystals.

RESUMEN

In a lidar system, replacing moving components with solid-state devices is highly anticipated to make a reliable and compact lidar system, provided that a substantially large beam area with a large angular extent as well as high angular resolution is assured for the lidar transmitter and receiver. A new quasi-solid-state lidar optical architecture employs a transmitter with a two-dimensional MEMS mirror for fine beam steering at a fraction of the degree of the angular resolution and is combined with a digital micromirror device for wide FOV scanning over 37 degree while sustaining a large aperture area of 140 mm squared. In the receiver, a second digital micromirror device is synchronized to the transmitter DMD, which enables a large FOV receiver. An angular resolution of 0.57°(H) by 0.23° (V) was achieved with 0.588 fps for scanning 1344 points within the field of view.

RESUMEN

Variations in mechanical properties of the extracellular matrix occurs in various processes, such as tissue fibrosis. The impact of changes in tissue stiffness on cell behaviour are studied in vitro using various types of biomaterials and methods. Stiffness patterning of hydrogel scaffolds, through the use of stiffness gradients for instance, allows the modelling and studying of cellular responses to fibrotic mechanisms. Gelatine methacryloyl (GelMA) has been used extensively in tissue engineering for its inherent biocompatibility and the ability to precisely tune its mechanical properties. Visible light is now increasingly employed for crosslinking GelMA hydrogels as it enables improved cell survival when performing cell encapsulation. We report here, the photopatterning of mechanical properties of GelMA hydrogels with visible light and eosin Y as the photoinitiator using physical photomasks and projection with a digital micromirror device. Using both methods, binary hydrogels with areas of different stiffnesses and hydrogels with stiffness gradients were fabricated. Their mechanical properties were characterised using force indentation with atomic force microscopy, which showed the efficiency of both methods to spatially pattern the elastic modulus of GelMA according to the photomask or the projected pattern. Crosslinking through projection was also used to build constructs with complex shapes. Overall, this work shows the feasibility of patterning the stiffness of GelMA scaffolds, in the range from healthy to pathological stiffness, with visible light. Consequently, this method could be used to build in vitro models of healthy and fibrotic tissue and study the cellular behaviours involved at the interface between the two.

RESUMEN

In vitro biofabrication is employed in fields such as biomedicine and those using biomimetic materials. However, it suffers from drawbacks such as low resolution, applicability on a limited range of components, and difficulty in purposefully depositing specific cells in three-dimensional space. Hence, this paper proposes a digital micromirror device-based optical projection lithography (DOPL) system for producing multi-component microstructures with resolutions of tens of microns and explores the behavior of cells with these structures. The printability and mechanical properties of these microstructures were investigated to assess their reproduction quality and the ability to control their structural characteristics. The results show that when DOPL is used with polyethylene glycol dimethacrylate (PEGDMA) hydrogel, an array of micropits can be fabricated within a few minutes. Furthermore, uniform cell spheroids form rapidly with high throughput when they are seeded into the micropits. Additionally, PEGDMA and gelatin methacryloyl (GelMA) were used to construct multi-component microstructures, and it was demonstrated that cells with various morphologies selectively adhere to the heterogeneous interface. In addition, DOPL could enable deposition of various cells for constructing microenvironments and for drug screening. Finally, a biomimetic peritoneal model was constructed. Overall, this work demonstrates the versatility of this system and its potential in cellular applications such as cell behavior research, drug screening, and tissue engineering.

Asunto(s)

RESUMEN

The specific spatial distribution of tissue generates a heterogeneous micromechanical environment that provides ideal conditions for diverse functions such as regeneration and angiogenesis. However, to manufacture microscale multicellular heterogeneous tissue modulesin vitroand then assemble them into specific functional units is still a challenging task. In this study, a novel method for the digital assembly of heterogeneous microtissue modules is proposed. This technique utilizes the flexibility of digital micromirror device-based optical projection lithography and the manipulability of bubble-based microrobots in a liquid environment. The results indicate that multicellular microstructures can be fabricated by increasing the inlets of the microfluidic chip. Upon altering the exposure time, the Young's modulus of the entire module and different regions of each module can be fine-tuned to mimic normal tissue. The surface morphology, mechanical properties, and internal structure of the constructed bionic peritoneum were similar to those of the real peritoneum. Overall, this work demonstrates the potential of this system to produce and control the posture of modules and simulate peritoneal metastasis using reconfigurable manipulation.

Asunto(s)

RESUMEN

High-speed optical reconstruction of 3D-scenes can be achieved using digital holography with binary digital micromirror devices (DMD) or a ferroelectric spatial light modulator (fSLM). There are many algorithms for binarizing digital holograms. The most common are methods based on global and local thresholding and error diffusion techniques. In addition, hologram binarization is used in optical encryption, data compression, beam shaping, 3D-displays, nanofabrication, materials characterization, etc. This paper proposes an adaptive binarization method based on a combination of local threshold processing, hologram division into blocks, and error diffusion procedure (the LDE method). The method is applied for binarization of optically recorded and computer-generated digital holograms of flat objects and three-dimensional scenes. The quality of reconstructed images was compared with different methods of error diffusion and thresholding. Image reconstruction quality was up to 22% higher by various metrics than that one for standard binarization methods. The optical hologram reconstruction using DMD confirms the results of the numerical simulations.

RESUMEN

Many mammalian neurons release multiple neurotransmitters to activate diverse classes of postsynaptic ionotropic receptors. Entopeduncular nucleus somatostatin (EP Sst+) projection neurons to the lateral habenula (LHb) release both glutamate and GABA, but it is unclear whether these are packaged into the same or segregated pools of synaptic vesicles. Here, we describe a method combining electrophysiology, spatially patterned optogenetics, and computational modeling designed to analyze the mechanism of glutamate/GABA co-release in mouse brain. We find that the properties of postsynaptic currents elicited in LHb neurons by optogenetically activating EP Sst+ terminals are only consistent with co-packaging of glutamate/GABA into individual vesicles. Furthermore, presynaptic neuromodulators that weaken EP Sst+ to LHb synapses maintain the co-packaging of glutamate/GABA while reducing vesicular release probability. Our approach is applicable to the study of multi-transmitter neurons throughout the brain, and our results constrain the mechanisms of neuromodulation and synaptic integration in LHb.

Asunto(s)

RESUMEN

The emerging demand for device miniaturization and integration prompts the patterning technique of micronano-cross-scale structures as an urgent desire. Lithography, as a sufficient patterning technique, has been playing an important role in achieving functional micronanoscale structures for decades. As a promising alternative, we have proposed and demonstrated the maskless optical projection nanolithography (MLOP-NL) technique for efficient cross-scale patterning. A minimum feature size of 32 nm, which is λ/12 super resolution breaking the optical diffraction limit, has been achieved by a single exposure. Furthermore, multiscale two-dimensional micronano-hybrid structures with the size over hundreds of micrometers and the precision at tens of nanometers have been fabricated by simply controlling the exposure conditions. The proposed MLOP-NL technique provides a powerful tool for achieving cross-scale patterning with both large-scale and precise configuration with high efficiency, which can be potentially used in the fabrication of multiscale integrated microsystems.

Asunto(s)

RESUMEN

Digital micromirror devices (DMDs) are spatial light modulators that employ the electro-mechanical movement of miniaturized mirrors to steer and thus modulate the light reflected off a mirror array. Their wide availability, low cost and high speed make them a popular choice both in consumer electronics such as video projectors, and scientific applications such as microscopy. High-end fluorescence microscopy systems typically employ laser light sources, which by their nature provide coherent excitation light. In super-resolution microscopy applications that use light modulation, most notably structured illumination microscopy (SIM), the coherent nature of the excitation light becomes a requirement to achieve optimal interference pattern contrast. The universal combination of DMDs and coherent light sources, especially when working with multiple different wavelengths, is unfortunately not straight forward. The substructure of the tilted micromirror array gives rise to a blazed grating, which has to be understood and which must be taken into account when designing a DMD-based illumination system. Here, we present a set of simulation frameworks that explore the use of DMDs in conjunction with coherent light sources, motivated by their application in SIM, but which are generalizable to other light patterning applications. This framework provides all the tools to explore and compute DMD-based diffraction effects and to simulate possible system alignment configurations computationally, which simplifies the system design process and provides guidance for setting up DMD-based microscopes. This article is part of the Theo Murphy meeting 'Super-resolution structured illumination microscopy (part 1)'.

RESUMEN

Confocal endoscopy has been widely used to obtain fine optically sectioned images. However, confocal endomicroscopic images are formed by point-by-point scanning in both lateral and axial directions, which results in long image acquisition time. Here, an endomicroscope with telecentric configuration is presented to achieve nonmechanical and rapid axial scanning for volumetric fluorescence imaging. In our system, optical sectioning in wide-field fashion is obtained through HiLo imaging with a digital micromirror device. Axial scanning, without mechanical moving parts, is conducted by digital focus adjustment using an electrically tunable lens, offering constant magnification and contrast. We demonstrate imaging performance of our system with optically sectioned images using fluorescently labeled beads, as well as ex vivo mice cardiac tissue samples. Our system provides multiple advantages, in terms of improved scanning range, and reduced image acquisition time, which shows great potentials for three-dimensional biopsies of volumetric biological samples.

Asunto(s)

RESUMEN

Obtaining molecular information deeper within optically turbid samples is valuable in many applications. However, in many cases this is challenging, in particular when the sample elicits strong laser-induced fluorescence emission. Here, we investigated the use of time-gated and micro-spatially offset Raman spectroscopy (micro-SORS) based on spectral multiplexing detection to obtain sub-surface molecular analysis and imaging for both fluorescing and non-fluorescing samples. The multiplexed spectral detection achieved with a digital micromirror device (DMD) allowed fast acquisition of the time-gated signals to enable three-dimensional Raman mapping (raster scanning in the lateral x,y plane and using time-of-flight calibration for the axial z-direction). Sub-millimeter resolution molecular depth mapping was achieved with dwell times on the order of seconds per pixel. To suppress fluorescence backgrounds and enhance Raman bands, time-gated Raman spectroscopy was combined with micro-SORS to recover Raman signals of red pigments placed behind a layer of optically turbid material. Using a defocusing micro-SORS approach, both fluorescence and Raman signals from the surface layers were further suppressed, which enhanced the Raman signals from the deeper sublayers containing the pigment. These results demonstrate that time-gated Raman spectroscopy based on spectral multiplexed detection, and in combination with micro-SORS, is a powerful technique for sub-surface molecular analysis and imaging, which may find practical applications in medical imaging, cultural heritage, forensics, and industry.

RESUMEN

Organ-on-a-chip (OoC) and microfluidic devices are conventionally produced using microfabrication procedures that require cleanrooms, silicon wafers, and photomasks. The prototyping stage often requires multiple iterations of design steps. A simplified prototyping process could therefore offer major advantages. Here, we describe a rapid and cleanroom-free microfabrication method using maskless photolithography. The approach utilizes a commercial digital micromirror device (DMD)-based setup using 375 nm UV light for backside exposure of an epoxy-based negative photoresist (SU-8) on glass coverslips. We show that microstructures of various geometries and dimensions, microgrooves, and microchannels of different heights can be fabricated. New SU-8 molds and soft lithography-based polydimethylsiloxane (PDMS) chips can thus be produced within hours. We further show that backside UV exposure and grayscale photolithography allow structures of different heights or structures with height gradients to be developed using a single-step fabrication process. Using this approach: (1) digital photomasks can be designed, projected, and quickly adjusted if needed; and (2) SU-8 molds can be fabricated without cleanroom availability, which in turn (3) reduces microfabrication time and costs and (4) expedites prototyping of new OoC devices.

RESUMEN

Wavelength-tunable thulium-doped fiber laser is demonstrated employing a digital micromirror device (DMD) in combination with a fixed grating. The diffraction property of four typical models of DMDs and its steering efficiency for the laser system are analyzed based on two-dimensional grating theory. By spatially modulating reflective patterns on a DMD, the stable, fast, and flexible tuning of lasing wavelength from 1930 nm to 2000 nm is achieved with wavelength tuning accuracy of 0.1 nm. The side-mode suppression ratio is larger than 50 dB around the 2 µm band with 3 dB linewidth less than 0.05 nm. The wavelength drift and power fluctuation are lower than 0.05 nm and 0.1 dB within 1 h at the room temperature, respectively.

RESUMEN

SIGNIFICANCE: Spatial frequency domain imaging (SFDI) is a quantitative imaging method to measure absorption and scattering of tissue, from which several chromophore concentrations (e.g., oxy-/deoxy-/meth-hemoglobin, melanin, and carotenoids) can be calculated. Employing a method to extract additional spectral bands from RGB components (that we named cross-channels), we designed a handheld SFDI device to account for these pigments, using low-cost, consumer-grade components for its implementation and characterization. AIM: With only three broad spectral bands (red, green, blue, or RGB), consumer-grade devices are often too limited. We present a methodology to increase the number of spectral bands in SFDI devices that use RGB components without hardware modification. APPROACH: We developed a compact low-cost RGB spectral imager using a color CMOS camera and LED-based mini projector. The components' spectral properties were characterized and additional cross-channel bands were calculated. An alternative characterization procedure was also developed that makes use of low-cost equipment, and its results were compared. The device performance was evaluated by measurements on tissue-simulating optical phantoms and in-vivo tissue. The measurements were compared with another quantitative spectroscopy method: spatial frequency domain spectroscopy (SFDS). RESULTS: Out of six possible cross-channel bands, two were evaluated to be suitable for our application and were fully characterized (520 ± 20 nm; 556 ± 18 nm). The other four cross-channels presented a too low signal-to-noise ratio for this implementation. In estimating the optical properties of optical phantoms, the SFDI data have a strong linear correlation with the SFDS data (R2 = 0.987, RMSE = 0.006 for µa, R2 = 0.994, RMSE = 0.078 for µs'). CONCLUSIONS: We extracted two additional spectral bands from a commercial RGB system at no cost. There was good agreement between our device and the research-grade SFDS system. The alternative characterization procedure we have presented allowed us to measure the spectral features of the system with an accuracy comparable to standard laboratory equipment.

Asunto(s)

RESUMEN

Nanotextures play increasingly important roles in nanotechnology. Recent studies revealed that their functionalities can be further enhanced by spatially modulating the height of their nanoscale pixels. Realizing the concept, however, is very challenging as it requires "grayscale" printing of the nanopixels in which their height is controlled within a few nanometers as a micrometric function of position. This work demonstrates such a high vertical and lateral resolution grayscale printing of polymeric nanopixels. We realize the height modulation by exploiting the discovery that the capillary rise of certain photopolymers can be optically controlled to stop at a predetermined height with sub-10-nm accuracy. Microscale spatial patterning of the control light directly extends the height modulation into a two-dimensionally patterned, grayscale nanopixel printing. Its utility is verified through readily reconfigurable, maskless printing of grayscale nanopixel arrays in dielectric and metallo-dielectric forms. This work also reveals the highly nonlinear and unstable nature of the polymeric nanocapillary effect, expanding its understanding and application scope.