RESUMEN

Cesium lead triiodide (CsPbI3) perovskites have garnered significant attention owing to their suitable bandgap for tandem silicon substrates and excellent chemical stability. However, γ-CsPbI3 prepared via low-temperature co-evaporation is limited by a narrow black phase processing window and random crystal orientation, hindering its optoelectronic performance and industrial applications. This study introduced trace amounts of methylammonium iodide (MAI) into the co-evaporation system, enhancing the crystallization process, promoting columnar grain growth, and stabilizing the γ-phase perovskite, resulting in films with improved structural integrity and reduced defect density. The optimal Pb/Cs ratio for achieving the best photoelectric performance shifted from 1:1 to 1.1:1 in the presence of MAI. Additionally, the incorporation of MAI allowed for more efficient longitudinal carrier transport, as evidenced by the enhanced photoluminescence (PL) intensity. The bandgap of CsPbI3 remained approximately at 1.7 eV before the δ-phase transition, ensuring suitability for photovoltaic applications. Ultimately, a photovoltaic device with 12% efficiency is achieved in the p-i-n structure without additional post-annealing of the CsPbI3 perovskite films, demonstrating the practical benefits of MAI incorporation.

RESUMEN

Amidino-based additives show great potential in high-performance perovskite solar cells (PSCs). However, the role of different functional groups in amidino-based additives have not been well elucidated. Herein, two multifunctional amidino additives 4-amidinobenzoic acid hydrochloride (ABAc) and 4-amidinobenzamide hydrochloride (ABAm) are employed to improve the film quality of formamidinium lead iodide (FAPbI3) perovskites. Compared with ABAc, the amide group imparts ABAm with larger dipole moment and thus stronger interactions with the perovskite components, i.e., the hydrogen bonds between N…H and I- anion and coordination bonds between C = O and Pb2+ cation. It strengthens the passivation effect of iodine vacancy defect and slows down the crystallization process of α-FAPbI3, resulting in the significantly reduced non-radiative recombination, long carrier lifetime of 1.7 µs, uniformly large crystalline grains, and enhances hydrophobicity. Profiting from the improved film quality, the ABAm-treated PSC achieves a high efficiency of 24.60%, and maintains 93% of the initial efficiency after storage in ambient environment for 1200 hours. This work provides new insights for rational design of multifunctional additives regarding of defect passivation and crystallization control toward highly efficient and stable PSCs.

RESUMEN

α-Phase formamidinium lead iodide (FAPbI3) perovskite solar cells (PSCs) have garnered significant attention, owing to their remarkable efficiency. Methylammonium chloride (MACl), a common additive, is used to control the crystallization of FAPbI3, thereby facilitating the formation of the photoactive α-phase. However, MACl's high volatility raises concerns regarding its stability and potential impact on the stability of the device. In this study, we partially substituted MACl with n-propylammonium chloride (PACl), which has a long alkyl chain, to promote the oriented crystallization of FAPbI3, ultimately forming an δ-phase-free perovskite. The FAPbI3 film containing PACl demonstrates an enhanced photoluminescence intensity and lifetime. Additionally, PACl's presence at grain boundaries acts as a protective layer for the PSCs. Consequently, we achieved a power conversion efficiency (PCE) of 22.4% and exceptional stability. It maintains over 95% of initial PCE for 100 days in an N2 glovebox, over 85% after 100 h of maximum power point tracking, and over 80% after 60 °C thermal aging.

RESUMEN

Gout flare-up, commonly resulting from monosodium urate monohydrate (MSUM) crystallization, has led to painful inflammatory arthritis among hundreds of millions of people. Herein, a kind of hydrogel nanoparticles (HNPs) with specific properties was developed, aimed at providing a promising pathway for MSUM crystallization control. The experimental and molecular dynamics simulation results synchronously indicate that the fabricated HNPs achieve efficient inhibition of MSUM crystallization governed by the mechanism of "host-guest interaction" even under very low-dose administration. HNPs as the host dispersed in the hyperuricemic model effectively lift the relative heterogeneous nucleation barrier of the MSUM crystal and hinder solute aggregation with strong electronegativity and hydrophobicity. The initial appearance of MSUM crystals was then delayed from 94 to 334 h. HNPs as the guest on the surface of the formed crystal can decelerate the growth rate by anchoring ions and occupying the active sites on the surface, and the terminal yield of the MSUM crystal declined to less than 1% of the control group. The good biocompatibility of HNPs (cell viability > 94%) renders it possible for future clinical applications. This study can guide the rational design of inhibitory nanomaterials and the development of their application in the control of relevant pathological crystallization.

Asunto(s)

RESUMEN

Supercooling can preserve food in its original fresh state below its ice point temperature without freezing. However, the supercooled state is unstable in thermodynamics, state breakdown can occur at any moment, resulting in irregular and larger ice crystals formation, leading to food tissue damage, and loss of quality and nutrients. While the effectiveness of supercooling preservation has been verified in the lab and pilot scale tests, the stability of the supercooled state of food remains an open question, posing a limitation for larger industrial-scale application of supercooling preservation. Based on this background, this review presents the instability mechanisms of supercooling preservation and summarizes the factors such as food properties (e.g., material size, food components, specific surface area, and surface roughness) and preservation circumstances (e.g., cooling rate, temperature variation, and mechanical disturbance) that influence the stability of the supercooled state of food. The review also discusses novel techniques for enhancing the supercooling capacity and their limitations (e.g., precise temperature control and magnetic field). Further studies are necessary to comprehensively evaluate the effects of influence factors and supercooling technologies on supercooling, realizing the true sense of 'no-crystal' food products under subzero temperature preservation conditions in commercial applications.

Supercooling can maximize the potential of low temperature in food preservation.Supercooled state of food is unstable, with many factors affecting its stability.The quality of foodstuffs with supercooled failure is unacceptable.Instability of supercooling limits its large application in food industry.Novel technologies are developed to enhance the state stability of food supercooling.

RESUMEN

HIGHLIGHTS: The modification of perovskite precursor by a series of phosphoryl chloride molecules can indeed improve the performance of perovskite LEDs (Pero-LEDs). The bis(2-oxo-3-oxazolidinyl) phosphinic chloride can not only regulate the phase distribution by controlling the crystallization rate but also passivate the defects of the quasi-2D perovskite. Highly efficient and reproducible Pero-LEDs are achieved with an maximum external quantum efficiency (EQEmax) of 20.82% and an average EQE (EQEave) of around 20% on 50 devices. Quasi-2D perovskites have attracted tremendous interest for application as light-emission layers in light-emitting diodes (LEDs). However, the heterogeneous n phase and non-uniform distribution still severely limit the further development of quasi-2D perovskite LEDs (Pero-LEDs). Meanwhile, the increased defect density caused by the reduced dimension and grain size induces non-radiative recombination and further deteriorates the device performance. Here, we found that a series of molecules containing phosphoryl chloride functional groups have noticeable enhancement effects on the device performance of quasi-2D Pero-LEDs. Then, we studied the modification mechanism by focusing on the bis(2-oxo-3-oxazolidinyl) phosphinic chloride (BOPCl). It is concluded that the BOPCl can not only regulate the phase distribution by decreasing the crystallization rate but also remain in the grain boundaries and passivate the defects. As a result, the corresponding quasi-2D Pero-LEDs obtained a maximum external quantum efficiency (EQEmax) of 20.82% and an average EQE (EQEave) of around 20% on the optimal 50 devices, proving excellent reproducibility. Our work provides a new selection of molecular types for regulating the crystallization and passivating the defects of quasi-2D perovskite films.

RESUMEN

All-inorganic CsPbI3 perovskite solar cells (PSCs) are becoming desirable for their excellent photovoltaic ability and adjustable crystal structure distortion. However, the unsatisfactory crystallization of the perovskite phase is unavoidable and leads to challenges on the road to the development of high-quality CsPbI3 perovskite films. Here, we reported the intermediate-phase-modified crystallization (IPMC) method, which introduces pyrrolidine hydroiodide (PI) before the formation of the perovskite phase. The hydrogen bonding, which originates from the interaction between the -NH in PI and the dimethylammonium iodide (DMAI) from the precursor solution, improved the crystallization conditions and further prompted the transition from the DMAPbI3 phase to CsPbI3 perovskite phase. The application of the IPMC method not only decreased the trap density but also changed the energy alignment for better separation of electron-hole pairs. As a result, the devices based on the PI-CsPbI3 perovskite films reached an efficiency of 18.72% and maintained 85% of their initial PCE after 1000 h of being stored in an ambient environment (∼25% RH, 25 °C). This work stimulates inspiration on how to conveniently fabricate high-quality perovskite films in industry.

RESUMEN

Large-area fabrication of perovskite light-emitting diodes (PeLEDs) through mass-production techniques has attracted growing attention due to their potential applications in lighting. Several breakthroughs are made for red/infrared and green emissions. Nevertheless, large-area blue/sky-blue PeLEDs, a requisite color for lighting, have not yet been reported. Here, efficient and large-area sky-blue PeLEDs are fabricated through blade-coating supersaturated precursors. The volume ratio of dimethyl sulfoxide to dimethylformamide is tuned to obtain a supersaturated CsPb(Br0.84 Cl0.16 )3 solution. Blade-coating this supersaturated precursor results in nucleation in the solution phase with much higher nucleation sites, and a faster crystallization rate. The uniform films formed by this approach exhibit smaller grain size, lower trap density, and higher radiative recombination rate. The peak external quantum efficiency of the blade-coated PeLEDs reaches 10.3% with sky-blue emission (489 nm). Benefitting from the robustness of this blade-coating technique, large-area sky-blue PeLEDs with a device area of 28 cm2 are also achieved with uniform emission. This work represents a significant step forward toward flat-panel lighting and full-color display for the PeLEDs.

RESUMEN

The emerging carbon-based mesoscopic perovskite solar cells (MPSCs) are known as one of the most promising candidates for photovoltaic applications thanks to their screen-printing process and excellent stability. Unfortunately, they usually suffer from serious defects because it is challenging to realize sufficient mesopore filling of the perovskite precursor solution throughout the triple-mesoporous scaffold. Herein, a bifunctional additive, biuret, endowed with both carbonyl and amino groups, was designed to realize a convenient fabrication approach for controllable crystallization of the precursor solution. Owing to the strong coordination ability with perovskite components, the incorporation of biuret can not only regulate crystallization kinetics allowing for the growth of high-quality perovskite crystals but also associate with uncoordinated ions for defect passivation to enhance the overall photovoltaic performance of MPSCs. A champion power conversion efficiency (PCE) of 13.42% with an enhanced short-circuit current density of 19.49 mA cm-2 and a much higher open-circuit voltage of 0.96 V was achieved for the device doped with 3 mol % biuret, which is 26% higher than that of the control device (10.66%). Moreover, the unencapsulated devices with biuret incorporation demonstrated superior stability, maintaining over 90% of the original PCE after 50 days of storage under ambient conditions. This work helps exploit bifunctional additive strategies for simultaneous defect passivation and crystallization control toward high-efficiency and long-term stability of carbon-based MPSCs.

RESUMEN

To resolve the inherent trade-off issue between responsivity and detectivity in FA0.9Cs0.1PbI3 perovskite photodetectors, this paper proposes a novel strategy using multifunctional self-combustion additives (urea and ammonium nitrate). During the early stages of crystallization, urea allows for the formation of a strong Lewis complex-derived low-dimensional intermediate phase; this suppresses the formation of perovskite nuclei, while ammonium ions assist the preferred grain growth along the [110] direction. During the high-temperature annealing steps, a self-combusting exothermic reaction occurs between urea as a fuel and NH4NO3 as an oxidizer, through which a locally supplied heat facilitates the removal of residual urea and byproducts. These multifunctional roles of self-combustible additives facilitate the production of high-quality, enlarged grain-structured perovskite films with improved optoelectronic properties, as confirmed by various analyses, including impedance spectroscopy and intensity-modulated photocurrent spectroscopy. The resulting FA0.9Cs0.1PbI3-based photodiode-type photodetectors exhibit outstanding performance, such as a high responsivity (0.762 A W-1) and specific detectivity (over 5.08 × 1013 Jones) at a very low external reverse bias (-0.5 V). Our findings clearly suggest that the multifunctional self-combustion additives strategy could help realize the full potential of FA1-xCsxPbI3 as a photodiode-type photodetector.

RESUMEN

A high-temperature annealing process (>250 °C) is always needed to obtain high-quality α-CsPbI2Br perovskite films, which makes it a challenge in the manufacture and application of flexible photovoltaic devices. In this work, a vacuum-controlled growth (VCG) method that can effectively control the crystallization of perovskite and provide high-quality films with larger grain size and low defect density at a lower temperature is demonstrated. Besides, a facile introduction of polyethyleneimine ethoxylated (PEIE) interlayer improves the charge extraction and suppresses the carrier recombination. Therefore, the power conversion efficiency (PCE) of an all-inorganic CsPbI2Br perovskite solar cell (PSC) reaches 12.32%. The unencapsulated PSCs with VCG treatment and PEIE modification show outstanding stabilities while retaining over 95% of the initial PCE after being stored in a N2 glovebox for 1000 h. This low-temperature crystallization method and cheap interlayer introduction can drive the development of future commercialization of all-inorganic perovskite solar cells.

RESUMEN

The solvent-engineering method is widely used to fabricate top-performing perovskite solar cells, which, however, usually exhibit inferior reproducibility. Herein, a two-stage annealing (TSA) strategy is demonstrated for processing of perovskite films, namely, annealing the intermediate phase at 60 °C for the first stage then at 100 °C for the second stage. Compared to conventional direct annealing temperature (DHA) at 100 °C, using this strategy, MAPbI3 films become more controllable, leading to superior film uniformity and device reproducibility with the champion device efficiency reaching 19.8%. More specifically, the coefficient of variation of efficiency for 49 cells is reduced to 5.9%, compared to 9.8% for that using DHA. The TSA process is carefully studied using Fourier transform infrared spectroscopy, X-ray diffraction, and UV-vis absorption spectroscopy. It is found that in comparison with DHA the formation of hydrogen bonding and crystallization of perovskite are much slower and can be better controlled when using TSA. The improvements in film uniformity and device reproducibility are attributed to: 1) controllable MAPbI3 crystal growth stemming from the progressive formation of hydrogen bonding between methylammonium and halide; 2) suppression of intermediate phase film dewetting, which is believed to be due to its decreased mobility at the initial low-temperature annealing stage.

RESUMEN

Control of crystal size and shape is crucially important for crystallization process development in the pharmaceutical industries. In general crystals of large size and low aspect ratio are desired for improved downstream manufacturability. It can be extremely challenging to design crystallization processes that achieve these targets for active pharmaceutical ingredients (APIs) that have very slow growth kinetics and needle-like morphology. In this work, a batch cooling crystallization process for a GlaxoSmithKline patented API, which is characterized by very slow growth rate and needle morphology, was studied and improved using process analytical technology (PAT) based feedback control techniques and in situ immersion milling. Four specific approaches were investigated: Supersaturation control (SSC), direct nucleation control (DNC), sequential milling-DNC, and simultaneous milling-DNC. This is the first time that immersion wet milling is combined with feedback control in a batch crystallization process. All four approaches were found to improve crystal size and/or shape compared to simple unseeded or seeded linear cooling crystallizations. DNC provided higher quality crystals than SSC, and sequential and simultanesou milling-DNC approaches could reduce particle 2D aspect ratio without generating too much fines. In addition, an ultra-performance liquid chromatography (UPLC) system was used online as a novel PAT tool in the crystallization study.

Asunto(s)

RESUMEN

A simple, low temperature solution process for Pb/Sn binary-metal perovskite planar-heterojunction solar cells is demonstrated. Sn inclusion substantially influences the band-gap, crystallization kinetics, and thin-film formation leading to a broadened light absorption and enhanced film coverage on ITO/PEDOT:PSS. As a result, the optimized device shows a PCE exceeding 10%, which is the best result for binary-metal perovskite solar cells so far.