RESUMEN

Soft robots based on flexible materials have attracted the attention due to high flexibility and great environmental adaptability. Among the common driving modes, electricity, light, and magnetism have the limitations of wiring, poor penetration capability, and sophisticated equipment, respectively. Here, an emerging wireless driving mode is proposed for the soft crawling robot based on wireless power transfer (WPT) technology. The receiving coil at the robot's tail, as an energy transfer station, receives energy from the transmitting coil and supplies the electrothermal responsiveness to drive the robot's crawling. By regulating the WPT's duration to control the friction between the robot and the ground, bidirectional crawling is realized. Furthermore, the receiving coil is also employed as a sensory organ to equip the robot with localization, ID recognition, and sensing capabilities based on electromagnetic coupling. This work provides an innovative and promising strategy for the design and integration of soft crawling robots, exhibiting great potential in the field of intelligent robots.

RESUMEN

The reconfigurable and modular method, and the adaptive morphology method are two main methodologies to achieve the multimodal robots. Basically, the former method mimics the biological multicellular systems, while the latter is mostly inspired by the multimodal animals. Herein inspired by the rhombic dodecahedron (RDD) origami model, a novel type of soft multicellular robots with multimodal locomotion is presented. Morphologically, the combinable and expandable three-dimensional (3D)-printed soft RDD cells are assembled into several typical patterns: in-line, cross shaped, oblong shaped, and parallelogra shaped. The kinematics based on the sequential monolithic deformations of soft RDDs is analyzed to generate multimodal locomotion: peristaltic crawling, two-anchor crawling, crawling with turning functions, and omnidirectional crawling through the propagating waves in two orthogonal directions. More encouragingly, without reorganizing the pattern or reshaping the morph, the in-line multicellular robots manifest excellent climbing abilities, where the built-in rhombic meshes alternately tighten and loosen the pole-like structures to provide the gripping forces reliably without sacrificing mobility. To wrap up, owing to the monolithic and hierarchical deformability, high reconfigurability, and 3D-printable manufacturability of the RDD, we anticipate that the soft multicellular robot can potentially manifest further contributions to the advanced robotics with embodied intelligence, such as task-oriented self-assembly robots, self-reconfigurable robotic systems, and goal-directed metamorphosis robots.

RESUMEN

Insect-scale mobile robots can execute diverse arrays of tasks in confined spaces. Although most self-contained crawling robots integrate multiple actuators to ensure high flexibility, the intricate actuators restrict their miniaturization. Conversely, robots with a single actuator lack the requisite agility and precision for planar movements. Herein, a novel eccentric rotation-dependent multidirectional transmission is presented using a tilted eccentric motor and a simplistic two-legged structural configuration for planar locomotion. The speed of the eccentric motor is modulated to enable alternating microscopic jumps to propel the system, creating a mode of motion analogous to galumphing of seals. Upon modeling the motion dynamics and conducting experiments, the effectiveness of direct motion transmission is substantiated through microscopic galumphing encompassing left/right crawling and straight-forward crawling. Finally, a 1.2 g untethered robot is developed, which demonstrates enhanced straight crawling and spot turning, traverses narrow tunnels, and achieves precise movements. Therefore, the proposed motion-transmission technique provides a comprehensive set of innovative solutions of underactuated agile robots.

RESUMEN

In a recent study, we developed a minimally actuated robot that utilizes wave-like locomotion and analyzed its kinematics. In this paper, we present an analysis of the robot's locomotion between two highly flexible surfaces. Initially, we created a simulation model of the robot between two surfaces and determined its speed and the conditions of locomotion based on the flexibility of the surface, the geometrical parameters, and the coefficient of friction for horizontal locomotion and climbing at different angles. Our findings indicate that wave locomotion is capable of consistently advancing along the surface, even when the surface is highly flexible. Next, we developed an experimental setup and conducted multiple experiments to validate the accuracy of our simulation. The results indicate an average relative difference of approximately 11% between the speed and advance ratio of the wave crawling between the two surfaces of our simulation model and the experimental results were performed using an actual robot. Lastly, we compared the wave locomotion results to those of the worm locomotion and discovered that wave locomotion outperforms worm locomotion, especially at a higher surface flexibility.

RESUMEN

Soft robots have received much attention due to their impressive capabilities including high flexibility and inherent safety features for humans or unstructured environments compared with hard-bodied robots. Soft actuators are the crucial components of soft robotic systems. Soft robots require dexterous soft actuators to provide the desired deformation for different soft robotic applications. Most of the existing soft actuators have only one or two deformation modes. In this article, a new soft pneumatic actuator (SPA) is proposed taking inspiration from Kirigami. Kirigami-inspired cuts are applied to the actuator design, which enables the SPA to be equipped with multiple deformation modes. The proposed Kirigami-inspired soft pneumatic actuator (KiriSPA) is capable of producing bending motion, stretching motion, contraction motion, combined motion of bending and stretching, and combined motion of bending and contraction. The KiriSPA can be directly manufactured using 3D printers based on the fused deposition modeling technology. Finite element method is used to analyze and predict the deformation modes of the KiriSPA. We also investigated the step response, creep, hysteresis, actuation speed, stroke, workspace, stiffness, power density, and blocked force of the KiriSPA. Moreover, we demonstrated that KiriSPAs can be combined to expand the capabilities of various soft robotic systems including the soft robotic gripper for delicate object manipulation, the soft planar robotic manipulator for picking objects in the confined environment, the quadrupedal soft crawling robot, and the soft robot with the flipping locomotion.

RESUMEN

Inchworm-inspired bionic soft crawling robot (SCR) composed of soft materials possesses preeminent active compliant deformation ability and has obvious advantages over traditional hard robots when moving in a confined space, which is up-and-coming candidate in robotic community. Nevertheless, there are rare investigations on dynamic modeling problems of the SCR allowing for its nonlinear deformation properties and frictional contact that affects its crawling performance. In view of this, within the theoretical framework of absolute nodal coordinate formulation, in consideration of material, geometry, and boundary nonlinearities, combining a multiple-point contact model with the Coulomb friction model, an effective and accurate nonlinear dynamic model for a bioinspired SCR with one single limb is proposed to elucidate its motion law. We implement an in-depth dynamic research and analysis on the SCR in terms of average velocity, stick-slip characteristic, gaits and successfully simulate its successive forward crawling locomotion meanwhile gaining dynamic response. The proposed theoretical dynamic model correctly captures the SCR' complex geometry configurations and nonlinear deformations, discloses its stick-slip dynamic behaviors and crawling locomotion mechanism, whose effectiveness and superiority are validated experimentally, which inspires a deep insight to motion analysis of other types of soft robots, and enlightens new ideas of their diversified architecture designs.

Asunto(s)

Robótica , Locomoción/fisiología , Marcha/fisiología , Modelos Teóricos , Movimiento (Física)

RESUMEN

In this article, a cable-driven elastic backbone worm-like robot (named "SpringWorm") of decimeter-level size is designed, which has high adaptability in crack inspection of the weld between reactor pressure vessel (RPV) and control rod drive mechanisms. The robot consists of a body that adopts a rectangular helix spring backbone driven by four cables and the flexible claws embedded with distributed electromagnets. Combining the omnidirectional deformation of the backbone and the passive deformation adsorption of the claws, the robot can achieve a variety of gaits. Based on the approaches of geometric analysis and transformation matrices of the coordinate frame, a kinematic model of the cable-driven backbone has been established. Moreover, a mechanical model considering the friction between the cable and the backbone has also been established. The top position and the bending angle of the backbone obtained by the theory, simulation, and experiment are in good agreement. In addition, the errors of the driving force between simulation and experimental results are also small. SpringWorm is 670 g, measures 206 × 65 × 75 mm, has a maximum speed of 8.9 mm/s, and has a maximum payload of 1 kg. The robot can climb over 2-cm-tall steps and 4-cm-deep ditches, and climb and turn on the vertical wall, on the pipe with a radius of 31 cm, and on the spherical surface of RPV.

RESUMEN

Soft robotics is one of the most popular areas in the field of robotics due to advancements in bionic technology, novel materials, and additive manufacturing. Existing soft crawling robots with specific structures have a single locomotion mode and cannot complete turning. Moreover, some silicone-based robots lack stiffness, leading to unstable movements especially when climbing walls, and have limited environmental adaptability. Therefore, in this study, a novel crawling soft robot with a multi-movement mode and high environmental adaptability is proposed. As the main structure of the robot, pneumatic single-channeled and double-channeled actuators are designed, inspired by the worm's somite expansion and contraction. Model-based methods are employed to evaluate and analyze the characteristics of the actuators. By the application of selective laser sintering technology and thermoplastic polyurethane (TPU) material, the fabricated actuators with an auxetic cavity structure are able to maintain a certain stiffness. Via the coordination between the actuators and the suckers, two locomotion modes-straight-line and turning-are realized. In the testing, the speed of straight-line crawling was 7.15 mm/s, and the single maximum turning angle was 28.8 degrees. The testing verified that the robot could realize crawling on flat ground, slopes, and smooth vertical walls with a certain stability and equipment-carrying capacity. This research could lay the foundation for subsequent applications, including large tank interior inspections, civil aviation fuselage and wing inspections, and wall-cleaning in high-rise buildings.

RESUMEN

Over the last decade, many bio-inspired crawling robots have been proposed by adopting the principle of two-anchor crawling or anisotropic friction-based vibrational crawling. However, these robots are complicated in structure and vulnerable to contamination, which seriously limits their practical application. Therefore, a novel vibro-impact crawling robot driven by a dielectric elastomer actuator (DEA) is proposed in this paper, which attempts to address the limitations of the existing crawling robots. The novelty of the proposed vibro-impact robot lies in the elimination of anchoring mechanisms or tilted bristles in conventional crawling robots, hence reducing the complexity of manufacturing and improving adaptability. A comprehensive experimental approach was adopted to characterize the performance of the robot. First, the dynamic response of the DEA-impact constraint system was characterized in experiments. Second, the performance of the robot was extensively studied and the fundamental mechanisms of the vibro-impact crawling locomotion were analyzed. In addition, effects of several key parameters on the robot's velocity were investigated. It is demonstrated that our robot can realize bidirectional motion (both forward and backward) by simple tuning of the key control parameters. The robot demonstrates a maximum forward velocity of 21.4 mm/s (equivalent to 0.71 body-length/s), a backward velocity of 16.9 mm/s, and a load carrying capacity of 9.5 g (equivalent to its own weight). The outcomes of this paper can offer guidelines for high-performance crawling robot designs, and have potential applications in industrial pipeline inspections, capsule endoscopes, and disaster rescues.

RESUMEN

Soft robots have attracted increasing attention due to their excellent versatility and broad applications. In this article, we present a minimally designed soft crawling robot (SCR) capable of robust locomotion in unstructured pipes with various geometric/material properties and surface topology. In particular, the SCR can squeeze through narrow pipes smaller than its cross section and propel robustly in spiked pipes. The gait pattern and locomotion mechanism of this robot are experimentally investigated and analysed by the finite element analysis, revealing that the resultant forward frictional force is generated due to the asymmetric mechanical properties along the length direction of the robot. The proposed simple yet working SCR could inspire novel designs and applications of soft robots in unstructured narrow canals such as large intestines or industrial pipelines.

Asunto(s)

Robótica , Análisis de Elementos Finitos , Fricción , Marcha , Locomoción

RESUMEN

Benthic operation plays a vital role in underwater applications, where crawling robots have advantages compared with turbine-based underwater vehicles, in locomotion accuracy, actuation efficiency, current resistance, and in carrying more payloads. On the other hand, soft robots are quickly trending in underwater robotic design, with their naturally sealed body structure and intrinsic compliance both desirable for the highly unstructured and corrosive underwater environment. However, the limitations resulting directly from the inherent compliance, in structural rigidity, actuation precision, and limited force exertion capability, have also restricted soft robots in underwater applications. To date soft robots are adopted mainly as grippers and manipulators for atraumatic sampling, rather than as locomotion platforms. In this work, we present a soft-robotic approach to designing underwater crawling robots, with three main innovations: 1) using rigid structural components to strategically reinforce the otherwise omni-directionally flexible soft actuators, drastically increasing their loading capability and actuation precision; 2) proposing a rigid-soft hybrid multi-joint leg design, with quasi-linear motion range and force exertion, while maintaining excellent passive impact compliance by exploiting the inherent flexibility of soft actuators; 3) developing a novel valve-free hydraulic actuation system with peristaltic pumps, achieving a compact, lightweight, and untethered underwater crawling robot prototype with a 5:1 payload-to-weight ratio and multi-gait capability. The prototype was tested for design verification and showcasing the advantages of the proposed hybrid mechanism and actuation approach.

RESUMEN

Soft robots have recently received much attention with their infinite degrees of freedoms and continuously deformable structures, which allow them to adapt well to the unstructured environment. A new type of soft actuator, namely, dielectric elastomer actuator (DEA) which has several excellent properties such as large deformation and high energy density is investigated in this study. Furthermore, a DEA-based soft robot is designed and developed. Due to the difficulty of accurate modeling caused by nonlinear electromechanical coupling and viscoelasticity, the iterative learning control (ILC) method is employed for the motion trajectory tracking with an uncertain model of the DEA. A D 2 type ILC algorithm is proposed for the task. Furthermore, a knowledge-based model framework with kinematic analysis is explored to prove the convergence of the proposed ILC. Finally, both simulations and experiments are conducted to demonstrate the effectiveness of the ILC, which results show that excellent tracking performance can be achieved by the soft crawling robot.