RESUMEN

Microlattices hold significant potential for developing lightweight structures for the aeronautics and astronautics industries. Laser Powder Bed Fusion (LPBF) is an attractive method for producing these structures due to its capacity for achieving high-resolution, intricately designed architectures. However, defects, such as cracks, in the as-printed alloys degrade mechanical properties, particularly tensile strength, and thereby limit their applications. This study examines the effects of microlattice architecture and relative density on crack formation in the as-printed 718 superalloy. Complex microlattice design and higher relative density are more prone to large-scale crack formation. The mechanisms behind these phenomena are discussed. This study reveals that microlattice type and relative density are crucial factors in defect formation in LPBF metallic alloys. The transmission electron microscopy observations show roughly round γ″ precipitates with an average size of 10 nm in the as-printed 718 without heat treatment. This work demonstrates the feasibility of the additive manufacturing of complex microlattices using 718 superalloys towards architectured lightweight structures.

RESUMEN

Alpha-synuclein (α-syn) aggregation plays a critical role in the pathogenicity of Parkinson's Disease (PD). This study aims to evaluate the aggregation propensity of α-syn fragment peptides designed using the variability found in humans and animals. Thioflavin T (ThT) and transmission electron microscopy (TEM) were used to validate the formation of fibrils to identify important amino acid residues. Human α-syn fragments 51-75, 37-61, 62-86, 76-100, and 116-140 demonstrate a significantly higher tendency to aggregate compared to fragments 1-25, 26-50, and 91-115. All species analyzed of the α-syn 37-61 and 62-86 regions were shown to form fibrils on both ThT and TEM. The α-syn 37-61 and 62-86 fragment regions exhibited a high susceptibility to aggregation, with fibril formation observed in all species. The A53T mutation in several α-syn 37-61 fragments may enhance their propensity for aggregation, suggesting a correlation between this mutation and the capacity for fibril formation. Furthermore, the presence of the non-amyloid-ß component (NAC) region, specifically in α-syn 62-86, was consistently observed in several fragments that displayed fibril formation, indicating a potential correlation between the NAC region and the process of fibril formation in α-syn. Finally, the combination of a high quantity of valine and a low quantity of acidic amino acids in these fragments may serve as indicators of α-syn fibril formation.

RESUMEN

Recombinant adeno-associated viruses (rAAVs) play a pivotal role in the treatment of genetic diseases. However, current production and purification processes yield AAV-based preparations that often contain unwanted empty, partially filled or damaged viral particles and impurities, including residual host cell DNA and proteins, plasmid DNA, and viral aggregates. To precisely understand the composition of AAV preparations, we systematically compared four different single-stranded AAV (ssAAV) and self-complementary (scAAV) fractions extracted from the CsCl ultracentrifugation gradient using established methods (transduction efficiency, analytical ultracentrifugation (AUC), quantitative and digital droplet PCR (qPCR and ddPCR), transmission electron microscopy (TEM) and enzyme-linked immunosorbent assay (ELISA)) alongside newer techniques (multiplex ddPCR, multi-angle light-scattering coupled to size-exclusion chromatography (SEC-MALS), multi-angle dynamic light scattering (MADLS), and high-throughput sequencing (HTS)). Suboptimal particle separation within the fractions resulted in unexpectedly similar infectivity levels. No single technique could simultaneously provide comprehensive insights in the presence of both bioactive particles and contaminants. Notably, multiplex ddPCR revealed distinct vector genome fragmentation patterns, differing between ssAAV and scAAV. This highlights the urgent need for innovative analytical and production approaches to optimize AAV vector production and enhance therapeutic outcomes.

Asunto(s)

RESUMEN

The objective of this study is to create a planar solar light absorber that exhibits exceptional absorption characteristics spanning from visible light to infrared across an ultra-wide spectral range. The eight layered structures of the absorber, from top to bottom, consisted of Al2O3, Ti, Al2O3, Ti, Al2O3, Ni, Al2O3, and Al. The COMSOL Multiphysics® simulation software (version 6.0) was utilized to construct the absorber model and perform simulation analyses. The first significant finding of this study is that as compared to absorbers featuring seven-layered structures (excluding the top Al2O3 layer) or using TiO2 or SiO2 layers as substituted for Al2O3 layer, the presence of the top Al2O3 layer demonstrated superior anti-reflection properties. Another noteworthy finding was that the top Al2O3 layer provided better impedance matching compared to scenarios where it was absent or replaced with TiO2 or SiO2 layers, enhancing the absorber's overall efficiency. Consequently, across the ultra-wideband spectrum spanning 350 to 1970 nm, the average absorptivity reached an impressive 96.76%. One significant novelty of this study was the utilization of various top-layer materials to assess the absorption and reflection spectra, along with the optical-impedance-matching properties of the designed absorber. Another notable contribution was the successful implementation of evaporation techniques for depositing and manufacturing this optimized absorber. A further innovation involved the use of transmission electron microscopy to observe the thickness of each deposition layer. Subsequently, the simulated and calculated absorption spectra of solar energy across the AM1.5 spectrum for both the designed and fabricated absorbers were compared, demonstrating a match between the measured and simulated results.

RESUMEN

BACKGROUND: During inhalation, airborne particles such as particulate matter ≤ 2.5 µm (PM2.5), can deposit and accumulate on the alveolar epithelial tissue. In vivo studies have shown that fractions of PM2.5 can cross the alveolar epithelium to blood circulation, reaching secondary organs beyond the lungs. However, approaches to quantify the translocation of particles across the alveolar epithelium in vivo and in vitro are still not well established. In this study, methods to assess the translocation of standard diesel exhaust particles (DEPs) across permeable polyethylene terephthalate (PET) inserts at 0.4, 1, and 3 µm pore sizes were first optimized with transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-VIS), and lock-in thermography (LIT), which were then applied to study the translocation of DEPs across human alveolar epithelial type II (A549) cells. A549 cells that grew on the membrane (pore size: 3 µm) in inserts were exposed to DEPs at different concentrations from 0 to 80 µg.mL- 1 ( 0 to 44 µg.cm- 2) for 24 h. After exposure, the basal fraction was collected and then analyzed by combining qualitative (TEM) and quantitative (UV-VIS and LIT) techniques to assess the translocated fraction of the DEPs across the alveolar epithelium in vitro. RESULTS: We could detect the translocated fraction of DEPs across the PET membranes with 3 µm pore sizes and without cells by TEM analysis, and determine the percentage of translocation at approximatively 37% by UV-VIS (LOD: 1.92 µg.mL- 1) and 75% by LIT (LOD: 0.20 µg.cm- 2). In the presence of cells, the percentage of DEPs translocation across the alveolar tissue was determined around 1% at 20 and 40 µg.mL- 1 (11 and 22 µg.cm- 2), and no particles were detected at higher and lower concentrations. Interestingly, simultaneous exposure of A549 cells to DEPs and EDTA can increase the translocation of DEPs in the basal fraction. CONCLUSION: We propose a combination of analytical techniques to assess the translocation of DEPs across lung tissues. Our results reveal a low percentage of translocation of DEPs across alveolar epithelial tissue in vitro and they correspond to in vivo findings. The combination approach can be applied to any traffic-generated particles, thus enabling us to understand their involvement in public health.

Asunto(s)

RESUMEN

Low-dimensional materials, such as MoS2, hold promise for use in a host of emerging applications, including flexible, wearable sensors due to their unique electrical, thermal, optical, mechanical, and tribological properties. The implementation of such devices requires an understanding of adhesive phenomena at the interfaces between these materials. Here, we describe combined nanoscale in situ transmission electron microscopy (TEM)/atomic force microscopy (AFM) experiments and simulations measuring the work of adhesion (Wadh) between self-mated contacts of ultrathin nominally amorphous and nanocrystalline MoS2 films deposited on Si scanning probe tips. A customized TEM/AFM nanoindenter permitted high-resolution imaging and force measurements in situ. The Wadh values for nanocrystalline and nominally amorphous MoS2 were 604 ± 323 mJ/m2 and 932 ± 647 mJ/m2, respectively, significantly higher than previously reported values for mechanically exfoliated MoS2 single crystals. Closely matched molecular dynamics (MD) simulations show that these high values can be explained by bonding between the opposing surfaces at defects such as grain boundaries. Simulations show that as grain size decreases, the number of bonds formed, the Wadh and its variability all increase, further supporting that interfacial covalent bond formation causes high adhesion. In some cases, sliding between delaminated MoS2 flakes during separation is observed, which further increases the Wadh and the range of adhesive interaction. These results indicate that for low adhesion, the MoS2 grains should be large relative to the contact area to limit the opportunity for bonding, whereas small grains may be beneficial, where high adhesion is needed to prevent device delamination in flexible systems.

RESUMEN

The present study compares sugarcane-wax purified policosanols sourced from Cuba (Raydel®) and China (BOC Sciences) and utilized following the synthesis of reconstituted high-density lipoproteins (rHDL). The two policosanols exhibited distinctly different ingredient ratios of long-chain aliphatic alcohols, particularly 1-octacosanol (C28) and 1-tetratriacotanol (C34). After synthesizing rHDL with apolipoprotein A-I (apoA-I), the two policosanols bound well with phospholipid and apoA-I to form the discoidal rHDL. Notably, rHDL-1, containing Cuban policosanol, displayed the largest particle diameter at approximately 78 ± 3 nm. In contrast, both control rHDL (rHDL-0) and rHDL containing Chinese policosanol (rHDL-2) exhibited smaller particles, with diameters of approximately 58 ± 3 nm and 61 ± 2 nm, respectively. Furthermore, rHDL-1 demonstrated enhanced anti-glycation activity, safeguarding apoA-I from degradation within HDL, and displayed the antioxidant ability to inhibit LDL oxidation. A microinjection of each rHDL into zebrafish embryos in the presence of carboxymethyllysine (CML) revealed rHDL-1 to have the strongest antioxidant activity with the highest embryo survivability and normal developmental morphology. Dermal application to recover the wound revealed rHDL-1 to have the highest wound-healing activity (75%) and survivability (92%) in the cutaneous wound area in the presence of CML. In adult zebrafish, injecting CML (250 µg) caused acute death and hyperinflammation, marked by heightened neutrophil infiltration and interleukin (IL)-6 production in liver. However, co-administering rHDL-1 notably increased survival (85%) and exhibited strong anti-inflammatory properties, reducing IL-6 production while improving the blood lipid profile. However, a co-injection of rHDL-2 resulted in the lowest survivability (47%) with more hepatic inflammation. In conclusion, Cuban policosanol (Raydel®) has more desirable properties for the in vitro synthesis of rHDL with stronger anti-glycation and antioxidant activities than those of Chinese policosanol (BOC Sciences). Moreover, Raydel-policosanol-integrated rHDL demonstrates a noteworthy effect on accelerated wound healing and robust anti-inflammatory properties, leading to increased survivability in zebrafish embryos and adults by effectively suppressing CML-induced hyperinflammation.

RESUMEN

The size and concentration are critical for the diagnostic and therapeutic applications of nanomaterials but the accurate measurement remains challenging. Nanoparticle tracking analysis (NTA) is widely used for size and concentration determination. However, highly repeatable standard operating procedures (SOPs) are absent. We adopted the "search-evaluate-test" strategy to standardize the measurement by searching the critical parameters. The particles per frame are linearly proportional to the sample concentration and the measured results are more accurate and repeatable when the concentration is 108-109 particles/ml. The optimal detection threshold is around 5. The optimal camera level is such that it allows clear observation of particles without diffractive rings and overexposure. The optimal speed is ≤ 50 in AU and âˆ¼ 10 µl/min in flow rate. We then evaluated the protocol using polydisperse polystyrene particles and we found that NTA could discriminate particles in bimodal mixtures with high size resolution but the performance on multimodal mixtures is not as good as that of resistive pulse sensing (RPS). We further analyzed the polystyrene particles, SiO2 particles, and biological samples by NTA following the SOPs. The size and concentration measured by NTA differentially varies to those determined by RPS and transmission electron microscopy.

Asunto(s)

RESUMEN

To verify whether members of the phylum Candidatus Patescibacteria parasitize archaea, we applied cultivation, microscopy, metatranscriptomic, and protein structure prediction analyses on the Patescibacteria-enriched cultures derived from a methanogenic bioreactor. Amendment of cultures with exogenous methanogenic archaea, acetate, amino acids, and nucleoside monophosphates increased the relative abundance of Ca. Patescibacteria. The predominant Ca. Patescibacteria were families Ca. Yanofskyibacteriaceae and Ca. Minisyncoccaceae, and the former showed positive linear relationships (r2 ≥ 0.70) Methanothrix in their relative abundances, suggesting related growth patterns. Methanothrix and Methanospirillum cells with attached Ca. Yanofskyibacteriaceae and Ca. Minisyncoccaceae, respectively, had significantly lower cellular activity than those of the methanogens without Ca. Patescibacteria, as extrapolated from fluorescence in situ hybridization-based fluorescence. We also observed that parasitized methanogens often had cell surface deformations. Some Methanothrix-like filamentous cells were dented where the submicron cells were attached. Ca. Yanofskyibacteriaceae and Ca. Minisyncoccaceae highly expressed extracellular enzymes, and based on structural predictions, some contained peptidoglycan-binding domains with potential involvement in host cell attachment. Collectively, we propose that the interactions of Ca. Yanofskyibacteriaceae and Ca. Minisyncoccaceae with methanogenic archaea are parasitisms.IMPORTANCECulture-independent DNA sequencing approaches have explored diverse yet-to-be-cultured microorganisms and have significantly expanded the tree of life in recent years. One major lineage of the domain Bacteria, Ca. Patescibacteria (also known as candidate phyla radiation), is widely distributed in natural and engineered ecosystems and has been thought to be dependent on host bacteria due to the lack of several biosynthetic pathways and small cell/genome size. Although bacteria-parasitizing or bacteria-preying Ca. Patescibacteria have been described, our recent studies revealed that some lineages can specifically interact with archaea. In this study, we provide strong evidence that the relationship is parasitic, shedding light on overlooked roles of Ca. Patescibacteria in anaerobic habitats.

Asunto(s)

RESUMEN

This investigation delves into the structural foundation of human dermal telocytes (TCs) with the aim of elucidating their role in signal transmission. Dermal TCs were isolated from human foreskins via enzymatic digestion and flow cytometric sorting, and identified by immunohistochemical staining with an antibody against CD34. The ultrastructure of TCs was examined using transmission electron microscopy (TEM). The proliferation rates of sorted TCs and CD34-negative fibroblasts were compared using the MTS assay (Cell Proliferation Assay). Images of viable cultured TCs were analyzed using atomic force microscopy (AFM) under normal atmospheric pressure and temperature. Results demonstrated that dermal TCs were positive for CD34 and vimentin, predominantly distributed in the reticular dermis and subcutaneous tissue, forming interwoven networks. Each TC had a small body with a high nuclear-plasma ratio and two or three extremely long and thin telopodes (TPs), exhibiting a typical 'moniliform' appearance. Compared with CD34-negative fibroblasts, dermal TCs exhibited significantly lower proliferation rates. Cultured TCs displayed typical moniliform projections (namely, TPs) in the AFM images. The distal ends of TPs were enlarged, shaped like a broom, and extended multiple pseudopods to contact other cell bodies. Slender filamentary pseudopodia and thick, short cone-like structures were observed on the surfaces of the dilated segments and terminals of TPs. These structures are assumed to be evidence of the secretion and release of endosomes, such as exosomes, and the communication between cells. TCs form interstitial networks in the reticular dermis and subcutaneous tissue, providing a structural basis for contacts between cells and the secretion of signal-carrying substances, involving intercellular connections and communication.

Asunto(s)

RESUMEN

Our prior investigation has confirmed that the anti-hepatocellular carcinoma activity of the plant saponin, specifically Uttroside B (Utt-B), derived from the leaves of Solanum nigrum Linn. This study concentrated on formulating a novel biocompatible nanocarrier utilizing Extracellular vesicles (EVs) to enhance the delivery of plant saponin into cells. The physicochemical attributes of Extracellular Vesicles/UttrosideB (EVs/Utt-B) were comprehensively characterized through techniques such as Transmission Electron Microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR). Despite the promising therapeutic potential of this uttroside B, mechanistic know-how about its entry into cells is still in its infancy. Our research sheds light on the extracellular vesicle-mediated mechanism facilitating the entry of the saponin into cells, a phenomenon confirmed through the use of by confocal microscopy. We further analysed drug-releasing kinetics and simulated the Pharmacokinetics by PBPK modelling. The simulated pharmacokinetics revealed the bioavailability of Uttroside-B in oral administration against intravenous administration.

Asunto(s)

RESUMEN

This research presents a groundbreaking approach in virus-related research, addressing challenges in electron microscopy (EM). This imaging technique has been crucial in exploring virus structures; however, traditional methods involve complex sample preparations and the risk of contamination. Herein, we introduce an approach that overcomes these obstacles, enabling high-resolution virus imaging without toxic staining procedures. Focusing on Begomovirus particles, an economically significant plant virus genus, our images confirm their non-enveloped structure and their twin icosahedral symmetry. Our methods involve sample collection, purification, and crystallization, followed by transmission electron microscopy - selected area electron diffraction (TEM-SAED) analysis. Notably, this study achieves 2D and 3D virus imaging through standard TEM, providing a new avenue for virus structure analysis and advancing virus-related research. Remarkable high image quality stemmed from the crystallization process, offering exciting possibilities for improving virus research and diagnosis while eliminating staining limitations.

RESUMEN

Silicon dioxide (SiO2), in its amorphous form, is an approved direct food additive in the United States and has been used as an anticaking agent in powdered food products and as a stabilizer in the production of beer. While SiO2 has been used in food for many years, there is limited information regarding its particle size and size distribution. In recent years, the use of SiO2 food additive has raised attention because of the possible presence of nanoparticles. Characterization of SiO2 food additive and understanding their physicochemical properties utilizing modern analytical tools are important in the safety evaluation of this additive. Herein, we present analytical techniques to characterize some SiO2 food additives, which were obtained directly from manufacturers and distributors. Characterization of these additives was performed using dynamic light scattering (DLS), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), and single-particle inductively coupled plasma mass spectrometry (spICP-MS) after the food additive materials underwent different experimental conditions. The data obtained from DLS, spICP-MS, and electron microscopy confirmed the presence of nanosized (1-100 nm) primary particles, as well as aggregates and agglomerates of aggregates with sizes greater than 100 nm. SEM images demonstrated that most of the SiO2 food additives procured from different distributors showed similar morphology. The results provide a foundation for evaluating the nanomaterial content of regulated food additives and will help the FDA address current knowledge gaps in analyzing nanosized particles in commercial food additives.

Asunto(s)

RESUMEN

This study demonstrates the conversion of metallic titanium (Ti) to titanium oxide just by conducting electrical current through Ti thin film in vacuum and increasing the temperature by Joule heating. This led to the improvement of electrical and thermal properties of a microbolometer. A microbolometer with an integrated Ti thermistor and heater width of 2.7 µm and a length of 50 µm was fabricated for the current study. Constant-voltage stresses were applied to the thermistor wire to observe the effect of the Joule heating on its properties. Thermistor resistance ~14 times the initial resistance was observed owing to the heating. A negative large temperature coefficient of resistance (TCR) of -0.32%/K was also observed owing to the treatment, leading to an improved responsivity of ~4.5 times from devices with untreated Ti thermistors. However, this does not improve the noise equivalent power (NEP), due to the increased flicker noise. Microstructural analyses with transmission electron microscopy (TEM), transmission electron diffraction (TED) and energy dispersive X-ray (EDX) confirm the formation of a titanium oxide (TiOx) semiconducting phase on the Ti phase (~85% purity) deposited initially, further to the heating. Formation of TiOx during annealing could minimize the narrow width effect, which we reported previously in thin metal wires, leading to enhancement of responsivity.

RESUMEN

Rhizobia are soil proteobacteria able to establish a nitrogen-fixing interaction with legumes. In this interaction, rhizobia must colonize legume roots, infect them, and become hosted inside new organs formed by the plants and called nodules. Rhizobial motility, not being essential for symbiosis, might affect the degree of success of the interaction with legumes. Because of this, the study of rhizobial motility (either swimming or surface motility) might be of interest for research teams working on rhizobial symbiotic performance. In this chapter, we describe the protocols we use in our laboratories for studying the different types of motilities exhibited by Sinorhizobium fredii and Sinorhizobium meliloti, as well as for analyzing the presence of flagella in these bacteria. All these protocols might be used (or adapted) for studying bacterial motility in rhizobia.

Asunto(s)

RESUMEN

Garnet-type Li7 La3 Zr2 O12 (LLZO) solid-state electrolytes hold great promise for the next-generation all-solid-state batteries. An in-depth understanding of the phase transformation during synthetic processes is required for better control of the crystallinity and improvement of the ionic conductivity of LLZO. Herein, the phase transformation pathways and the associated surface amorphization are comparatively investigated during the sol-gel and solid-state syntheses of LLZO using in situ heating transmission electron microscopy (TEM). The combined ex situ X-ray diffraction and in situ TEM techniques are used to reveal two distinct phase transformation pathways (precursors â†’ La2 Zr2 O7  â†’ LLZO and precursors â†’ LLZO) and the subsequent layer-by-layer crystal growth of LLZO on the atomic scale. It is also demonstrated that the surface amorphization surrounding the LLZO crystals is sensitive to the postsynthesis cooling rate and significantly affects the ionic conductivity of pelletized LLZO. This work brings up a critical but often overlooked issue that may greatly exacerbate the Li-ion conductivity by undesired synthetic conditions, which can be leveraged to ameliorate the overall crystallinity to improve the electrochemical performance of LLZO. These findings also shed light on the significance of optimizing surface structure to ensure superior performance of Li-ion conductors.

RESUMEN

Understanding the growth behavior and morphology evolution of defects in 2D transition metal dichalcogenides is significant for the performance tuning of nanoelectronic devices. Here, the low-voltage aberration-corrected transmission electron microscopy with an in situ heating holder and a fast frame rate camera to investigate the sulfur vacancy lines in monolayer MoS2 is applied. Vacancy concentration-dependent growth anisotropy is discovered, displaying first lengthening and then broadening of line defects as the vacancy densifies. With the temperature increase from 20 °C to 800 °C, the defect morphology evolves from a dense triangular network to an ultralong linear structure due to the temperature-sensitive vacancy migration process. Atomistic dynamics of line defect reconstruction on the millisecond time scale are also captured. Density functional theory calculations, Monte Carlo simulation, and configurational force analysis are implemented to understand the growth and reconstruction mechanisms at relevant time and length scales. Throughout the work, high-resolution imaging is closely combined with quantitative analysis of images involving thousands of atoms so that the atomic-level structure and the large-area statistical rules are obtained simultaneously. The work provides new ideas for balancing the accuracy and universality of discoveries in the TEM study and will be helpful to the controlled sculpture of nanomaterials.

RESUMEN

The addition of Pt generally promotes the reduction of Co3 O4 in supported catalysts, which further improves their activity and selectivity. However, due to the limited spatial resolution, how Pt and its location and distribution affect the reduction of Co3 O4 remains unclear. Using ex situ and in situ ambient pressure scanning transmission electron microscopy, combined with temperature-programmed reduction, the reduction of silica-supported Co3 O4 without Pt and with different location and distribution of Pt is studied. Shrinkage of Co3 O4 nanoparticles is directly observed during their reduction, and Pt greatly lowers the reduction temperature. For the first time, the initial reduction of Co3 O4 with and without Pt is studied at the nanoscale. The initial reduction of Co3 O4 changes from surface to interface between Co3 O4 and SiO2 . Small Pt nanoparticles located at the interface between Co3 O4 and SiO2 promote the reduction of Co3 O4 by the detachment of Co3 O4 /CoO from SiO2 . After reduction, the Pt and part of the Co form an alloy with Pt well dispersed. This study for the first time unravels the effects of Pt location and distribution on the reduction of Co3 O4 nanoparticles, and helps to design cobalt-based catalysts with efficient use of Pt as a reduction promoter.

RESUMEN

We investigated the effect of nanoparticle (NP) image broadening and its contrast change dependence on a support matrix thickness in a transmission electron microscope (TEM). We measured the effect of NP size and atomic number on its image broadening. Based on the experimental TEM images we generated tomograms of NPs on four types of support matrix. The measured shape aspect ratio of the NPs in such tomograms depends on the geometry of the support matrix. For example, the aspect ratio of 6 nm NP placed on a thin film with window-frame support is 1.14, while the aspect ratio of 6 nm NP on a rod-shaped support with 910 nm diameter is 1.67 in a tomogram.

RESUMEN

Redox-induced interconversions of metal oxidation states typically result in multiple phase boundaries that separate chemically and structurally distinct oxides and suboxides. Directly probing such multi-interfacial reactions is challenging because of the difficulty in simultaneously resolving the multiple reaction fronts at the atomic scale. Using the example of CuO reduction in H2 gas, a reaction pathway of CuO → monoclinic m-Cu4 O3 → Cu2 O is demonstrated and identifies interfacial reaction fronts at the atomic scale, where the Cu2 O/m-Cu4 O3 interface shows a diffuse-type interfacial transformation; while the lateral flow of interfacial ledges appears to control the m-Cu4 O3 /CuO transformation. Together with atomistic modeling, it is shown that such a multi-interface transformation results from the surface-reaction-induced formation of oxygen vacancies that diffuse into deeper atomic layers, thereby resulting in the formation of the lower oxides of Cu2 O and m-Cu4 O3 , and activate the interfacial transformations. These results demonstrate the lively dynamics at the reaction fronts of the multiple interfaces and have substantial implications for controlling the microstructure and interphase boundaries by coupling the interplay between the surface reaction dynamics and the resulting mass transport and phase evolution in the subsurface and bulk.