RESUMEN

Styrene-butadiene rubber (SBR) waste from the shoe industry was repurposed to produce polypropylene (PP)-based compounds, with the aim of evaluating their antistatic potential. Styrene-ethylene-propylene (SEP) was added as a compatibilizing agent, while carbon nanotubes (MWCNT) were incorporated as a conductive nanofiller. The polymer compounds were processed in an internal mixer, and injection molded. The properties evaluated included torque rheometry, melt flow index (MFI), impact strength, tensile strength, Shore D hardness, electrical conductivity, heat deflection temperature (HDT), and differential scanning calorimetry (DSC), along with scanning electron microscopy (SEM) for morphology analysis. The production of the PP/SBR/SEP (60/30/10 wt%) compound resulted in a ductile material, enhancing impact strength and elongation at break to 161.2% and 165.2%, respectively, compared to pure PP. The addition of SEP improved the compatibility of the PP/SBR system, leading to an increase in the torque curve and a reduction in the MFI. Furthermore, the SBR/SEP combination in PP accelerated the crystallization process and increased the degree of crystallinity, suggesting a nucleating effect. Carbon nanotubes, in concentrations ranging from 0.5 to 2 phr (parts per hundred resin), were added to the PP/SBR/SEP system. Only the PP/SBR/SEP/MWCNT compound with 2 phr of MWCNT was suitable for antistatic applications, exhibiting an electrical conductivity of 4.52 × 10-07 S/cm. This was due to the greater distribution of MWCNT in the PP matrix, as demonstrated by SEM. In addition, remains tough at room temperature, with a 166% increase in impact strength compared to PP. However, there was a reduction in elastic modulus, tensile strength, Shore D hardness, and HDT due to increased flexibility. SBR waste can be reintegrated into the production chain to produce antistatic polymeric compounds, obtaining a tough material at room temperature.

Asunto(s)

RESUMEN

In this work, polyhydroxybutyrate (PHB) was maleic anhydride (MA)-grafted in the molten state, using dicumyl peroxide (DCP) as a reaction initiator. Tin(II) 2-ethylhexanoate (Sn(Oct)2) and styrene monomer (St.) were used to maximize the maleic anhydride grafting degree. When PHB was modified with MA/DCP and MA/DCP/Sn(Oct)2, viscosity was reduced, suggesting chain scission in relation to pure PHB. However, when the styrene monomer was added, the viscosity increased due to multiple grafts of MA and styrene into the PHB chain. In addition, the FTIR showed the formation of a new band at 1780 cm-1 and 704 cm-1, suggesting a multiphase copolymer PHB-g-(St-co-MA). The PHB (MA/DCP) system showed a grafting degree of 0.23%; however, the value increased to 0.39% with incorporating Sn(Oct)2. The highest grafting efficiency was for the PHB (MA/DCP/St.) system with a value of 0.91%, while the PHB (MA/DCP/St./Sn(Oct)2) hybrid mixture was reduced to 0.73%. The chemical modification process of PHB with maleic anhydride increased the thermal stability by about 20 °C compared with pure PHB. The incorporation of 0.5 phr of the Sn(Oct)2 catalyst increased the efficiency of the grafting degree in the PHB. However, the St./Sn(Oct)2 hybrid mixture caused a deleterious effect on the maleic anhydride grafting degree.

Asunto(s)

RESUMEN

Styrene emissions can be treated by physicochemical, biological, or physicochemical/biological means. Due to its low solubility in water an alternative to eliminate styrene emissions from air is the use of two-phase partitioning bioreactors (TPPBs) which comprised a hydrophobic non-aqueous phase (NAP) which can improve mass transfer of styrene. This study was devoted to prepare and evaluate the main physicochemical characteristics of novel NAPs such as Ionic liquids (ILs), Deep Eutectic Solvents (DESs) and Natural Deep Eutectic Solvents (NADEs) as well as their toxicity and biodegradability to treat styrene vapors. Absorption experiments of styrene showed that the best NAPs were the DESs formed with Tetrabutylammonium bromide and decanoic acid and the ILs [C6mim][FAP], [C4mim] [NTf2] and [C4mim] [PF6], since they presented a styrene partition coefficient between 0.0015 and 0.0041. Finally, the IL [C6mim][FAP] was used as a NAP in a TPPB batch process given its high styrene affinity, low solubility in water and non-biodegradability; styrene mineralization was three times higher in the TPPB compared with the control. ILs are potential adjuvant phases in biological degradation systems, as well as other solvents like DESs and NADESs.

Asunto(s)

RESUMEN

Biobased hydroxyl-terminated polybutadiene (HTPB) was successfully synthesized in a one-pot reaction via metathesis degradation of industrial rubbers. Thus, polybutadiene (PB) and poly(styrene-butadiene-styrene) (SBS) were degraded via metathesis with high yields (>94%), using the fatty alcohol 10-undecen-1-ol as a chain transfer agent (CTA) and the second-generation Grubbs−Hoveyda catalyst. The identification of the hydroxyl groups (-OH) and the formation of biobased HTPB were verified by FT-IR and NMR. Likewise, the molecular weight and properties of the HTPB were controlled by changing the molar ratio of rubber to CTA ([C=C]/CTA) from 1:1 to 100:1, considering a constant molar ratio of the catalyst ([C=C]/Ru = 500:1). The number average molecular weight (Mn) ranged between 583 and 6580 g/mol and the decomposition temperatures between 134 and 220 °C. Moreover, the catalyst optimization study showed that at catalyst loadings as low as [C=C]/Ru = 5000:1, the theoretical molecular weight is in good agreement with the experimental molecular weight and the expected diols and polyols are formed. At higher ratios than those, the difference between theoretical and experimental molecular weight is wide, and there is no control over HTPB. Therefore, the rubber/CTA molar ratio and the amount of catalyst play an important role in PB degradation and HTPB synthesis. Biobased HTPB can be used to synthesize engineering design polymers, intermediates, fine chemicals, and in the polyurethane industry, and contribute to the development of environmentally friendly raw materials.

RESUMEN

Potential drug-eluting scaffolds of electrospun poly(acrylic acid-co-styrene sulfonate) P(AA-co-SS) in clonogenic assays using tumorigenic gastric and ovarian cancer cells were tested in vitro. Electrospun polymer nanofiber (EPnF) meshes of PAA and PSSNa homo- and P(AA-co-SS) copolymer composed of 30:70, 50:50, 70:30 acrylic acid (AA) and sodium 4-styrene sulfonate (SSNa) units were performed by electrospinning (ES). The synthesis, structural and morphological characterization of all EPnF meshes were analyzed by optical and electron microscopy (SEM-EDS), infrared spectroscopy (FTIR), contact angle, and X-ray diffraction (XRD) measurements. This study shows that different ratio of AA and SSNa of monomers in P(AA-co-SS) EPnF play a crucial role in clonogenic in vitro assays. We found that 50:50 P(AA-co-SS) EPnF mesh loaded with antineoplastic drugs can be an excellent suppressor of growth-independent anchored capacities in vitro assays and a good subcutaneous drug delivery system for chemotherapeutic medication in vivo model for surgical resection procedures in cancer research.

RESUMEN

We investigate the use of an ionic liquid (IL) as a surfactant in emulsion polymerization (EP) reactions. ILs have been proposed as surfactants for micellar dispersions, emulsions, micro-emulsions and suspensions. Thus, it is important to acquire knowledge of the application of ILs in heterogeneous polymerizations. We selected the amphiphile cationic oligoether IoLiLyte C1EG™ as an IL for this purpose and compared its performance to that of the conventional surfactant dodecyl trimethyl ammonium bromide (DTAB) in the EP of methyl methacrylate and styrene. After we found the proper concentration range of the IL, this amphiphile showed similar polymerization rates to those observed with DTAB for both monomers. The evolution of monomer conversion and the final average diameter of formed polymeric particles were similar for both evaluated surfactants, demonstrating their capability to stabilize the EPs of the investigated monomers. We simulated the evolution of monomer conversion and particle size using a conventional model for emulsion polymerization, which showed good agreement with the experimental data, suggesting that the EP with this IL follows Smith-Ewart kinetics.

RESUMEN

In this research, the adsorption of styrene and styrene oxide, both biomass derivatives, on KTaO3 (001) and LiTaO3 (0001) perovskite-like structures was studied from a theoretical point of view. The study was carried out using density functional theory (DFT) calculations. The adsorption phenomenon was deeply studied by calculating the adsorption energies (Eads ), adsorbate-surface distances (Å) and evaluating the differences of charge density and charge transfer (ΔCT). For complexes adsorbed on KTaO3 (TaO2 , KO and K(OH)2 exposed layers), the highest Eads was found for styrene oxide, attributed to the oxygen reactivity of the epoxy group describing a strong interaction with the surface. However, when evaluating a K(O)2 model, a more favorable interaction of styrene with the surface is observed, resulting in a high Eads of -9.9 eV and a ΔCT of 3.1e. For LiTaO3 , more favorable interactions are found for both adsorbates compared to KTaO3 , evidenced by the higher adsorption energies and charge density differences, particularly for the styrene complex adsorbed on TaO2 exposed layer (Eads : -10.2 eV). For the LiO termination, the surface exposed oxygens are fundamental for the adsorption of styrene and styrene oxide, leading to a considerable structural distortion. The obtained results thus provide understanding of the structural features, surface reactivity and adsorption sites of LiTaO3 and KTaO3 perovskite in the context of a heterogeneous catalytic process, such as the oxidation of styrene.

Asunto(s)

RESUMEN

A mathematical model for the kinetics, composition and molar mass development of the bulk reversible addition-fragmentation chain transfer (RAFT) copolymerization of glycidyl methacrylate (GMA) and styrene (St), at several GMA molar feed fractions at 103 °C, in the presence of 2-cyano isopropyl dodecyl trithiocarbonate as the RAFT agent and 1,1'-azobis(cyclohexane carbonitrile), as the initiator, is presented. The copolymerization proceeded in a controlled manner and dispersities of the copolymers remained narrow even at high conversions. Experimental data and calculated profiles of conversion versus time, composition versus conversion and molar mass development for the RAFT copolymerization of St and GMA agreed well for all conditions tested, including high-conversion regions. The kinetic rate constants associated with the RAFT- related reactions and diffusion-controlled parameters were properly estimated using a weighted nonlinear multivariable regression procedure. The mathematical model developed in this study may be used as an aid in the design and upscaling of industrial RAFT polymerization processes.

RESUMEN

The adsorption of boron, beryllium and lithium clusters on graphitic carbon nitride g-C3N4, and the adsorption of styrene molecule on the B, Be, Li cluster/g-C3N4 sheet have been investigated through the density functional theory (DFT) calculations. Our calculations show distortion of the geometry of the clusters when coordinating with the g-C3N4 sheet. Boron (n = 5 and 6), beryllium (n = 2-4, 6) and Li3 cluster on g-C3N4 present characteristics to adsorb a styrene molecule. The styrene on Be4/g-C3N4 system exhibits better adsorption, due to the beryllium atoms have strong interactions with the π-orbitals of the aromatic ring of the styrene molecule. The study of natural bond orbitals of styrene-cluster/g-C3N4 systems showed the donation process from the styrene molecule and the g-C3N4 sheet towards the boron, beryllium and lithium clusters. Only back donation was observed the boron and beryllium clusters.

Asunto(s)

RESUMEN

In many ways, cancer cells are different from healthy cells. A lot of tactical nano-based drug delivery systems are based on the difference between cancer and healthy cells. Currently, nanotechnology-based delivery systems are the most promising tool to deliver DNA-based products to cancer cells. This review aims to highlight the latest development in the lipids and polymeric nanocarrier for siRNA delivery to the cancer cells. It also provides the necessary information about siRNA development and its mechanism of action. Overall, this review gives us a clear picture of lipid and polymer-based drug delivery systems, which in the future could form the base to translate the basic siRNA biology into siRNA-based cancer therapies.

RESUMEN

The parameters that effect the synthesis of poly(styrene-co-divinylbenzene) magnetized with magnetite (STY-DVB-M) by polymerization emulsion were assessed in order to obtain magnetic beads to be used as matrix for lipase immobilization. The combined effect of polyvinyl alcohol (PVA) concentration and agitation was studied using response surface methodology. A 22 full-factorial design was employed for experimental design and analysis of the results. The optimum PVA concentration and agitation were found to be 1 wt% and 400 rpm, respectively. These conditions allow attaining the best particle size distribution of the synthesized particles (80% between 80 and 24 mesh). The performance of the magnetic beads was tested as a matrix for immobilizing two microbial lipases (Lipases from Burkholderia cepacia-BCL and Pseudomonas fluorescens-AKL) by physical adsorption and high immobilization yields (> 70%) and hydrolytic activities (≅ 1850 U g-1) were attained. The properties of free and immobilized lipases were searched and compared. Similar performance regarding the analyzed parameters (biochemical properties, kinetic constants and thermal stability) were obtained. Moreover, both immobilized lipases were found to be able to catalyze the transesterification of coconut oil with ethanol to produce fatty acid ethyl esters (FAEE). Further study showed that the B. cepacia immobilized lipase could be used seven times without significant decrease of activity, revealing half-life time of 970 h.

Asunto(s)

RESUMEN

Due to the continual increase in waste generated from electronic devices, the management of plastics, which represents between 10 and 30% by weight of waste electrical and electronic equipment (WEEE or e-waste), becomes indispensable in terms of environmental and economic impacts. Considering the importance of acrylonitrile-butadiene-styrene (ABS), polycarbonate (PC), and their blends in the electronics and other industries, this study presents a new application of laser-induced breakdown spectroscopy (LIBS) for the fast and direct determination of PC and ABS concentrations in blends of these plastics obtained from samples of e-waste. From the LIBS spectra acquired for the PC/ABS blend, multivariate calibration models were built using partial least squares (PLS) regression. In general, it was possible to infer that the relative errors between the theoretical or reference and predicted values for the spiked samples were lower than 10%.

Asunto(s)

RESUMEN

The styrene (St) emulsion polymerization using Aerosol MA80 as surfactant and in the presence of sodium styrene sulfonate (NaSS) was studied. The effect of NaSS content was assessed using MA80 concentrations below and at the critical micellar concentration. It was found that at the higher NaSS and MA80 contents, the number of particles (N) reaches a maximum of the order of 1017particles/cm3 water, a huge value that has never been reported. In this work an explanation for this super-enhanced particle nucleation phenomenon is proposed. Such hypothesis is based on the role of St-NaSS oligomers formed in the aqueous phase and their synergy with MA80 molecules to provide colloidal stability to the system. The proposal seems to be consistent with the experimental data obtained for the evolution of monomer conversion, N, particles size distribution and the wideness of this latter as well as with a theoretical estimation of the N.

RESUMEN

The type and concentration of perfluorinated compounds (PFCs) can induce different types of enzymes and promote alternate patterns of BTEX transformation. However, it is not known how the presence of active fluorocarbon-degrading microbial populations affects the transformation of BTEX. In addition to chemical analysis at the molecular level, our research approached the aqueous film forming fire-fighting foams (AFFF) and BTEX co-contamination at a large-scale with respirometers to quantify the total microbial metabolism of soil via CO2 output levels. The intended outcome of this research was to obtain and characterize shifts in BTEX degradation at a set realistic environmental condition while measuring byproducts and CO2 production. Both methodologies complimentarily provided an in-depth knowledge of the environmental behavior of fire-fighting foams. The biodegradation was monitored using headspace sampling and two types of gas chromatography: thermal conductivity detector and flame ionization detector. Headspace samples were periodically withdrawn for BTEX biodegradation and CO2 production analysis. Our research suggests the discovery of an altered metabolic pathway in aromatic hydrocarbons biodegradation that is directly affected by fluorinated substances. The fluorinated compounds affected the BTEX biodegradation kinetics, as PFCs may contribute to a shift in styrene and catechol concentrations in co-contamination scenarios. A faster production of styrene and catechol was detected. Catechol is also rapidly consumed, thus undergoing further metabolic stages earlier under the presence of PFCs. The release of AFFF compounds not only changes byproducts output but also drastically disturbs the soil microbiota according to the highly variable CO2 yields. Therefore, we observed a high sensitivity of microbial consortia due to PFCs in the AFFF formulation, therefore shifting their BTEX degradation routes in terms of intermediate products concentration.

Asunto(s)

RESUMEN

Polymeric materials constitute a considerable fraction of waste computer equipment and polymers acrylonitrile-butadiene-styrene and high-impact polystyrene are the main thermoplastic polymeric components found in waste computer equipment. Identification, separation and characterisation of additives present in acrylonitrile-butadiene-styrene and high-impact polystyrene are fundamental procedures to mechanical recycling of these polymers. The aim of this study was to evaluate the methods for identification of acrylonitrile-butadiene-styrene and high-impact polystyrene from waste computer equipment in Brazil, as well as their potential for mechanical recycling. The imprecise utilisation of symbols for identification of the polymers and the presence of additives containing toxic elements in determinate computer devices are some of the difficulties found for recycling of acrylonitrile-butadiene-styrene and high-impact polystyrene from waste computer equipment. However, the considerable performance of mechanical properties of the recycled acrylonitrile-butadiene-styrene and high-impact polystyrene when compared with the virgin materials confirms the potential for mechanical recycling of these polymers.

Asunto(s)

RESUMEN

This aim of study was to compare the performance of a biofilter (BF) and trickle bed reactor (TBR) under increased styrene loading with a constant acetone load, 2 gc/m3/h. At styrene loading rates up to 30 gc/m3/h, the BF showed higher styrene removal than TBR. However, the BF efficiency started to drop beyond this threshold loading and could never reach steady state, whereas the TBR continued to yield a 50% styrene removal. The acetone removal remained constant (93-98%) in both the reactors at any styrene loading. Once the overloading was lifted, the BF recovered within 26 min, whereas the TBR efficiency bounced back only to 95%, gradually returning to complete removal only in 10 h.

RESUMEN

The surface properties of biomaterials, such as wettability, polar group distribution, and topography, play important roles in the behavior of cell adhesion and proliferation. Gaseous plasma discharges are among the most common means to modify the surface of a polymer without affecting its properties. Herein, we describe the surface modification of poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) films using atmospheric pressure plasma processing through exposure to a dielectric barrier discharge (DBD). After treatment the film surface showed significant changes from hydrophobic to hydrophilic as the water contact angle decreasing from 95° to 37°. All plasma-treated films developed more hydrophilic surfaces compared to untreated films, although the reasons for the change in the surface properties of PS and PMMA differed, that is, the PS showed chemical changes and in the case of PMMA they were topographical. Excellent adhesion and cell proliferation were observed in all films. In vitro studies employing flow cytometry showed that the proliferation of L929 cells was higher in the film formed by a 1:1 mixture of PS/PMMA, which is consistent with the results of a previous study. These findings suggest better adhesion of L929 onto the 1:1 PS/PMMA modified film, indicating that this system is a new candidate biomaterial for tissue engineering.

Asunto(s)

RESUMEN

The aim of this work was the study a trickling biofilter, where water was circulated throughout the bed. In the first steady state experiment, the packing materials used were 25mm Pall rings. The airflow rate was increased gradually and the concentration of styrene in the air stream was held constant. In the second experiment, 15mm Pall rings were used. In this case, the feed contained both styrene and a small amount of acetone. The concentration of acetone and the air flow rate were kept constant, but the styrene inlet concentration was increased. The concentrations were measured at the input, and also at an intermediate and the outlet position in the biotrickling filter to determine the concentration profile along the reactor. Using the values of coefficient of determination (R²) and the coefficient of variation of the fitted constant as criteria, a zero order model with diffusional limitation was chosen as the best representation of the data. Then a further, third, set of experiments were done at unsteady state, using step changes of the inlet concentration levels of both styrene and acetone at a steady air flow-rate . Inlet and outlet concentrations were measured as a function of time and the results were adequately described using a simple first order model.

RESUMEN

The biological treatment of styrene waste gas in a trickle-bed filter (TBF) was investigated. The bioreactor consisted of a two-part glass cylinder (ID 150 mm) filled with 25 mm polypropylene Pall rings serving as packing material. The bed height was 1m. Although the laboratory temperature was maintained at 22 ºC, the water temperature in the trickle-bed filter was slightly lower (about 18 ºC).The main aim of our study was to observe the effect of empty-bed residence time (EBRT) on bioreactor performance at a constant pollutant concentration over an extended time period. The bioreactor was inoculated with a mixed microbial consortium isolated from a styrene-degrading biofilter that had been running for the previous two years. After three weeks of acclimation period, the bioreactor was loaded with styrene (100 mg.m-3). EBRT was in the range of 53 s to 13 s. A maximum elimination capacity (EC) of 11.3 gC.m-3.h-1 was reached at an organic loading (OL) rate of 18.6 gC.m-3.h-1.