RESUMEN

Existing models of the human skin have aided our understanding of skin health and disease. However, they currently lack a microbial component, despite microbes' demonstrated connections to various skin diseases. Here, we present a robust, standardized model of the skin microbial community (SkinCom) to support in vitro and in vivo investigations. Our methods lead to the formation of an accurate, reproducible, and diverse community of aerobic and anaerobic bacteria. Subsequent testing of SkinCom on the dorsal skin of mice allowed for DNA and RNA recovery from both the applied SkinCom and the dorsal skin, highlighting its practicality for in vivo studies and -omics analyses. Furthermore, 66% of the responses to common cosmetic chemicals in vitro were in agreement with a human trial. Therefore, SkinCom represents a valuable, standardized tool for investigating microbe-metabolite interactions and facilitates the experimental design of in vivo studies targeting host-microbe relationships.

Asunto(s)

RESUMEN

With the increasing use of invasive, interventional, indwelling, and implanted medical devices, healthcare-associated infections caused by pathogenic biofilms have become a major cause of morbidity and mortality. Herein, we present the fabrication, characterization, and in vitro evaluation of biocompatibility and anti-biofilm properties of new coatings based on Fe3O4 nanoparticles (NPs) loaded with usnic acid (UA) and ceftriaxone (CEF). Sodium lauryl sulfate (SLS) was employed as a stabilizer and modulator of the polarity, dispersibility, shape, and anti-biofilm properties of the magnetite nanoparticles. The resulting Fe3O4 functionalized NPs, namely Fe3O4@SLS, Fe3O4@SLS/UA, and Fe3O4@SLS/CEF, respectively, were prepared by co-precipitation method and fully characterized by XRD, TEM, SAED, SEM, FTIR, and TGA. They were further used to produce nanostructured coatings by matrix-assisted pulsed laser evaporation (MAPLE) technique. The biocompatibility of the coatings was assessed by measuring the cell viability, lactate dehydrogenase release, and nitric oxide level in the culture medium and by evaluating the actin cytoskeleton morphology of murine pre-osteoblasts. All prepared nanostructured coatings exhibited good biocompatibility. Biofilm growth inhibition ability was tested at 24 h and 48 h against Staphylococcus aureus and Pseudomonas aeruginosa as representative models for Gram-positive and Gram-negative bacteria. The coatings demonstrated good biocompatibility, promoting osteoblast adhesion, migration, and growth without significant impact on cell viability or morphology, highlighting their potential for developing safe and effective antibacterial surfaces.

RESUMEN

Schizophrenia is a psychiatric disorder that results from abnormal levels of neurotransmitters in the brain. Risperidone (RIS) is a common drug prescribed for the treatment of schizophrenia. RIS is a hydrophobic drug that is typically administered orally or intramuscularly. Transdermal drug delivery (TDD) could potentially improve the delivery of RIS. This study focused on the development of RIS nanocrystals (NCs), for the first time, which were incorporated into dissolving microneedle array patches (DMAPs) to facilitate the drug delivery of RIS. RIS NCs were formulated via wet-media milling technique using poly(vinylalcohol) (PVA) as a stabiliser. NCs with particle size of 300 nm were produced and showed an enhanced release profile up to 80 % over 28 days. Ex vivo results showed that 1.16 ± 0.04 mg of RIS was delivered to both the receiver compartment and full-thickness skin from NCs loaded DMAPs compared to 0.75 ± 0.07 mg from bulk RIS DMAPs. In an in vivo study conducted using female Sprague Dawley rats, both RIS and its active metabolite 9-hydroxyrisperidone (9-OH-RIS) were detected in plasma samples for 5 days. In comparison with the oral group, DMAPs improved the overall pharmacokinetic profile in plasma with a âˆ¼ 15 folds higher area under the curve (AUC) value. This work has represented the novel delivery of the antipsychotic drug, RIS, through microneedles. It also offers substantial evidence to support the broader application of MAPs for the transdermal delivery of poorly water-soluble drugs.

Asunto(s)

RESUMEN

The diversity and delicate balance of the oral microbiome contribute to oral health, with its disruption leading to oral and systemic diseases. Toothpaste includes elements like traditional additives such as sodium lauryl sulfate (SLS) as well as novel postbiotics derived from probiotics, which are commonly employed for maintaining oral hygiene and a healthy oral cavity. However, the response of the oral microbiota to these treatments remains poorly understood. In this study, we systematically investigated the impact of SLS, and toothpaste containing postbiotics (hereafter, postbiotic toothpaste) across three systems: biofilms, animal models, and clinical populations. SLS was found to kill bacteria in both preformed biofilms (mature biofilms) and developing biofilms (immature biofilms), and disturbed the microbial community structure by increasing the number of pathogenic bacteria. SLS also destroyed periodontal tissue, promoted alveolar bone resorption, and enhanced the extent of inflammatory response level. The postbiotic toothpaste favored bacterial homeostasis and the normal development of the two types of biofilms in vitro, and attenuated periodontitis and gingivitis in vivo via modulation of oral microecology. Importantly, the postbiotic toothpaste mitigated the adverse effects of SLS when used in combination, both in vitro and in vivo. Overall, the findings of this study describe the impact of toothpaste components on oral microflora and stress the necessity for obtaining a comprehensive understanding of oral microbial ecology by considering multiple aspects.

RESUMEN

In this study, we examined the cytotoxic effects of six commercial children's mouthrinses (designated as #1, #2, #3, #4, #5, and #6) and four commercial children's toothpastes (designated as #1, #2, #3, and #4) on primary human neonatal melanocytes that were used as a representative model for oral melanocytes. Mouthrinses diluted directly with culture medium (1:2, 1:5, 1:10, 1:100, and 1:1000) were added to monolayers of melanocytes for 2 min, followed by 24 h recovery, after which MTS cytotoxicity assay was conducted. The extracts of each toothpaste were prepared (50% w/v), diluted in culture medium (1:2, 1:5, 1:10, 1:50, 1:100, and 1:1000), and added to cell monolayers for 2 min (standard brushing time), followed by an analysis of cell viability after 24 h. Results showed that all mouthrinses except mouthrinse #4 showed significantly greater loss of cell viability, ascribed to cetylpyridinium chloride (CPC) that induced significant cytotoxicity to melanocytes (IC50 = 54.33 µM). In the case of toothpastes, the examination of cellular morphology showed that a 2 min exposure to all toothpaste extracts induced a concentration-dependent decline in cell viability, pronounced in toothpaste containing sodium lauryl sulfate (SLS) detergent. Further results suggested SLS to be the critical driver of cytotoxicity (IC50 = 317.73 µM). It is noteworthy that toothpaste #1 exhibited much lower levels of cytotoxicity compared to the other three toothpastes containing SLS. Taken together, these findings suggest that the melanocytotoxicity of children's mouthrinse (#4) and toothpaste (#1) is comparatively low. To the best of our knowledge, this is the first study to examine the impact of children's toothpastes and mouthrinses on neonatal primary human melanocytes. Future studies to investigate these findings in a realistic scenario replicating oral cavity conditions of the presence of microbiota, pellicle layer and saliva, and other cell types are warranted.

RESUMEN

OBJECTIVES: To comparatively evaluate the nisin-incorporated ethylenediamine tetraacetic acid (N-EDTA) and MTAD on cytotoxicity, endodontic biofilm eradication potential, smear layer removal ability, and sealer penetration depth. MATERIALS AND METHODS: N-EDTA was prepared and characterized using high-performance liquid chromatography (HPLC). Minimum inhibitory, minimum bactericidal, and minimum biofilm inhibitory concentration (MBC, MIC, and MBIC) were determined on Enterococcus faecalis (E. faecalis) strain. The cytocompatibility of N-EDTA and MTAD was evaluated using 3,(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT)-based colorimetric assay. Dentin specimens (n = 88 for antibacterial analysis, n = 170 for sealer penetration depth) were prepared and subjected to the classical irrigating strategy and obturation, respectively. The scanning electron microscopic evaluation (SEM) was done for the evaluation of biofilm disruption and smear layer removal. Confocal laser scanning microscopy (CLSM) evaluation was done for determining percentage of bacterial viability and sealer penetration depth. Statistical analysis of one-way ANOVA and Tukey's HSD post hoc tests for bacterial viability and Kruskal-Wallis test and Mann-Whitney test for smear layer removal and depth of penetration were done with the significance level set at p < 0.05. RESULTS: MTAD and N-EDTA showed cytocompatibility without any statistical differences from each other. For N-EDTA, the MIC and MBC values were 12.5 µg/ml (1:8), and MBIC values were 36 µg/ml. Biofilm disruption and killed bacterial percentage of N-EDTA was statistically higher than MTAD, whereas both the materials showed similar efficacy in the removal of the smear layer and sealer penetration depth. CONCLUSION: N-EDTA had negligible cytotoxicity with similar smear layer removal ability, sealer penetration, and better antibiofilm potential than MTAD. CLINICAL RELEVANCE: N-EDTA can serve as a viable alternative endodontic irrigant.

Asunto(s)

RESUMEN

The extracellular matrix (ECM) scaffolds are considered a gold standard for the engineering of appropriate grafts used in regenerative medicine for tissue repair, and decellularization of myocardial tissue is one of the most studied processes for obtaining natural ECM to date. Decellularization methods, agents used, or treatment durations can be varied to optimize cardiac tissue decellularization parameters. In this work we performed a morphological and morphometric analysis of cardiac tissue subjected to decellularization protocols based on Sodium Deoxycholate (SD) or Sodium Lauryl Sulfate (SLS) to identify factors that allow optimization of single-detergent based protocols for cardiac ECM manufacturing. For this, Wistar rat hearts (n=10) were subjected to 5 different decellularization protocols (n=2) and then histologically processed to achieve H&E or Azan trichrome stained sections for the morphological and morphometric analysis of the obtained ECM. The results of this study showed that SLS alters the spatial distribution of cardiac ECM collagen fibers, and SD can be successfully used in tailoring single-based detergent decellularization protocols by appropriately adjusting the application times of hypo/hyperosmotic shocks, which increases the lytic action of the detergent, and the washing times for the efficient elimination of cellular residues.

RESUMEN

The low water solubility of aspirin (ASPH) is well known, creating research challenges regarding both its composition and its delivery. Therefore, the development of new aspirin-based formulations that are water soluble is a research, technological, and financial issue. With the aim to improve the water solubility of ASPH, the micelle of formula SLS@ASPH (SLS = Sodium Lauryl Sulfate) was formed. The Critical Micelle Concentration (CMC) of SLS in the presence of ASPH was determined by ultrasonic velocity, complementary, and transient birefringence measurements. The SLS@ASPH was characterized by the melting point (m.p.), attenuated total reflection spectroscopy (FT-IR-ATR), and X-ray fluorescence spectroscopy (XRF) in a solid state and in a solution by ultraviolet-visible (UV-Vis) and 1H NMR spectroscopies. The SLS/ASPH molar ratio was determined to be 5/1 in SLS@ASPH. The inhibitory activity of SLS@ASPH towards lipoxygenase (LOX), an enzyme that takes part in the inflammation mechanism, was studied. The inhibitory activity of SLS@ASPH against LOX is 3.5-fold stronger than that of free SLS. The in vitro toxicity of the SLS@ASPH was tested on immortalized human keratinocyte (HaCaT) cells.

Asunto(s)

RESUMEN

Sodium lauryl sulfate (SLS) is an anionic surfactant, which has a wide range of usage in the health sector and in dental pharmaceutical products, especially in toothpastes. The objective of this review was to investigate the effects of SLS containing dentifrices on oral and periodontal health, possible side effects, and its benefits. A thorough literature search was done using databases of PubMed and Google Scholar and finally, 40 articles were included in the study. This narrative review revealed the sources of discrepancy and conflicting results regarding the impact of SLS on oral cavity as well as a lack of sufficient evidence in most topics. Hence, the evidence suggests improved drug bioavailability when used as a solubilizer, improved plaque control, and reduction in bad breath. On the other hand, SLS can serve as a risk indicator of prolonged oral wound healing time, recurrent aphthous stomatitis.

RESUMEN

Au nanoparticles were synthesized in a soft template of pseudo-polyanions composed of polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS) by the in situ reduction of chloroauric acid (HAuCl4) with PVP. The particle sizes and morphologies of the Au nanoparticles were regulated with concentrations of PVP or SDS at room temperature. Distinguished from the Au nanoparticles with various shapes, Au nanoflowers (AuNFs) with rich protrusion on the surface were obtained at the low final concentration of SDS and PVP. The typical AuNF synthesized in the PVP (50 g·L-1)-SDS (5 mmol·L-1)-HAuCl4 (0.25 mmol·L-1) solution exhibited a face-centered cubic structure dominated by a {111} crystal plane with an average equivalent particle size of 197 nm and an average protrusion height of 19 nm. Au nanoparticles with four different shapes, nanodendritic, nanoflower, 2D nanoflower, and nanoplate, were synthesized and used to modify the bare glassy carbon electrode (GCE) to obtain Au/GCEs, which were assigned as AuND/GCE, AuNF/GCE, 2D-AuNF/GCE, and AuNP/GCE, respectively. Electrochemical sensing platforms for nitrite detection were constructed by these Au/GCEs, which presented different detection sensitivity for nitrites. The results of cyclic voltammetry (CV) demonstrated that the AuNF/GCE exhibited the best detection sensitivity for nitrites, and the surface area of the AuNF/GCE was 1.838 times of the bare GCE, providing a linear c(NO2-) detection range of 0.01-5.00 µmol·L-1 with a limit of detection of 0.01 µmol·L-1. In addition, the AuNF/GCE exhibited good reproducibility, stability, and high anti-interference, providing potential for application in electrochemical sensing platforms.

Asunto(s)

RESUMEN

Rivaroxaban (RVX), an oral direct factor Xa inhibitor, is being explored as an alternative to traditional anticoagulans. However, RVX still faces pharmacokinetic limitations and adverse effects, highlighting the need for more effective formulations. In this regard, pharmaceutical nanotechnology, particularly the use of polymeric nanoparticles (PNPs), offers a promising approach for optimizing RVX delivery. This study aimed to develop and physicochemically characterize RVX-loaded poly(lactic-co-glycolic acid) (PLGA)/sodium lauryl sulfate (SLS) or didodecyl dimethylammonium bromide (DMAB) nanoparticles, and also evaluate their pharmacological and toxicological profiles as a potential therapeutic strategy. The PNPs exhibited sizes below 300 nm and spherical morphology, with both negative and positive surface charges, according to surfactant used. They demonstrated high encapsulation efficiency and suitable yields, as well as rapid initial liberation followed by sustained release in different pH environments. Importantly, in vivo evaluations revealed a time-dependent antithrombotic effect surpassing the free form of RVX when administered orally in SLS or DMAB PNP. No hemolytic or cytotoxic effects were observed at various concentrations of the PNPs. Interestingly, the PNPs did not induce hemorrhagic events or cause liver enzyme alterations in vivo. These findings suggest that RVX-loaded SLS or DMAB PNPs are promising innovative therapeutic alternatives for the treatment of thromboembolic diseases.

Asunto(s)

RESUMEN

The SARS-CoV-2 virus is primarily transmitted through direct or indirect contact with the mucous membranes of the mouth and nostrils. The presence of SARS-CoV-2 in sputum with a high viral load suggested that maintaining good oral hygiene could be critical in limiting COVID-19 disease. Brushing the teeth frequently and regularly with widely available amphiphilic detergent, sodium lauryl sulfate (SLS)-based toothpastes could help in preventing the spread of SARS-CoV-2. We proposed a community survey-based methodology followed by an in vitro biochemical strategy to test the virucidal potentiality of SLS, an amphiphilic detergent found in these toothpastes. Through biomolecular structure and docking analysis using models of spike protein and SLS, we showed a possible molecular mechanism of action for SLS-enabled viral particle inactivation.

RESUMEN

The aim of this study was to produce sustained-release tablets by V-shaped blending of polymer and tablets without using solvents or heating, and we investigated the design of polymer particles with high coating performance by modifying the structure of the particles using sodium lauryl sulfate. Dry-latex particles of ammonioalkyl methacrylate copolymer were prepared by adding the surfactant into aqueous latex, followed by freeze drying. The resulting dry latex was mixed with tablets (1:10) using a blender and the resulting coated tablets were characterized. Tablet coating by the dry latex was promoted as the weight ratio of surfactant to polymer increased. At a surfactant ratio of 5%, deposition of the dry latex was most effective and the resulting coated tablets (annealed at 60 °C/75%RH for 6 h) exhibited sustained-release characteristics over a period of 2 h. The addition of SLS prevented coagulation of colloidal polymer in the freeze drying, resulting in a loose-structured dry latex. This latex was easily pulverized by V-shaped blending with tablets and the resulting fine particles with high adhesiveness were deposited on the tablets. However, at a surfactant ratio of 10%, the coating of dry latex decreased due to reduced adhesiveness.

Asunto(s)

RESUMEN

Results of a study into the effect of anionic surfactant sodium lauryl sulfate on the sorption of cells of the electrogenic bacteria strain Micrococcus luteus 1-I on the surface of carbon cloth used as electrodes in microbial fuel cell (MFC) technology are presented. Investigations using spectrophotometry, microscopy and microbiology revealed an increase in the degree of sorption of microbial cells on carbon cloth under the action of sodium lauryl sulfate at concentrations of 10 and 100 mg/l. The sorption of cells did not significantly differ from the control at a surfactant content of 200, 400 and 800 mg/l. It had no negative effect on bacterial growth in the concentration range from 10 to 800 mg/l. Due to the fairly high resistance of the electrogenic strain M. luteus 1-I to sodium lauryl sulfate, a widespread component of wastewater, it may be considered as a prospective bioagent for the treatment of domestic wastewater using MFC technology.

RESUMEN

Increasing the biocompatibility of some biological implants through tissue engineering is important for regenerative medicine, which recently has a rapid development dynamic. In this study we used tree different washing protocols, respectively with Sodium Lauryl Sulfate (SLS), with Sodium Deoxycholate (SD), and with saline (Sa) to achieve partial decellularization of 2-3mm thick cross-sections through Wistar rat hearts. Pieces of the heart tissue were either histologically analyzed to evaluate the decellularization processes or implanted for 5 days on 9-day-old chick embryo chorioallantoic membrane (CAM) and then histologically analyzed to evaluate CAM-implant interactions. Histological analysis of SLS or SD washed tissues showed different microscopic features of the decellularization processes, SLS-washing leading to the formation of a completely decellularized ECM layer at the periphery of the heart tissue. Both detergents induced changes in the spatial arrangement of collagen fibers of the heart tissue. Histological analysis of the CAM implants shoved that the peripheral zone with complete decellularization induced by SLS increased the biocompatibility of heart tissue implants by favoring neovascularization and cell migration. These results suggested that the biocompatibility of the heart tissue implant can be modulated by the appropriate use of a SLS-based decellularization protocol.

RESUMEN

We aimed to evaluate how different types of toothpaste (TP) for children affected molecular mechanisms of odontogenesis in zebrafish embryos. Commercially available TPs were selected according to their detergent contents as the cocamidopropyl betaine (CAPB) containing TP (TP1) and sodium lauryl sulfate (SLS) containing TP (TP2). TP3 contained no detergent. Effects of SLS, and CAPB alone were also examined. TP and detergent concentrations affecting development were determined as 750 mg/L and 4 mg/L, respectively. Embryos were exposed to TP1, TP2, TP3, SLS, CAPB, and embryo medium (control) for 72 h post fertilization. Acetylcholinesterase (AChE) activity and oxidant-antioxidant parameters were analyzed spectrophotometrically. Expressions of tooth development genes were evaluated by reverse transcription PCR (RT-PCR). Intraocular distance, lower jaw, and ceratohyal cartilage length were displayed using Alcian Blue staining. axin2 and wnt10a expressions increased in SLS and TP2 groups. igf2a and eve1 expressions decreased in all groups except TP3. nrOb1 expression decreased in TP1, SLS, and CAPB groups. Oxidant-antioxidant balance was disturbed in all groups except TP3, evidenced by increased lipid peroxidation, nitric oxide. SLS, and CAPB groups were more affected in terms of AChE, glutathione-S-transferase, and superoxide dismutase; perturbations were observed in cartilage structures. Altered expression of tooth development gene axin2 correlated with wnt10a, and with changes in cartilage structures in SLS and TP2 groups. TP3 group presented no disruptions in oxidant-antioxidant balance. Our study shows the availability of externally developing zebrafish embryos in examining the effects of TP' contents on embryogenesis.

RESUMEN

Meloxicam (MLX) is a poorly soluble drug exhibiting strong hydrophobicity. This combination of properties makes dissolution enhancement by particle size reduction ineffective; therefore, combined formulation approaches are required. Various approaches were investigated in this study, including milling, solid dispersions, and self-emulsified lipid formulations. Whereas milling studies of MLX and its co-milling with various polymers have been reported in recent literature, this study is focused on investigating the dissolution kinetics of particulate formulations obtained by co-milling MLX with sodium lauryl sulfate (SLS) in a planetary ball mill with 5-25 wt.% SLS content. The effects of milling time and milling ball size were also investigated. No significant reduction in drug crystallinity was observed under the investigated milling conditions according to XRD data. For the dissolution study, we used an open-loop USP4 dissolution apparatus, and recorded dissolution profiles were fitted according to the Weibull model. The Weibull parameters and a novel criterion-surface utilization factor-were used to evaluate and discuss the drug release from the perspective of drug particle surface changes throughout the dissolution process. The most effective co-milling results were achieved using smaller balls (2 mm), with a co-milling time of up to 15 min SLS content of up to 15 wt.% to increase the dissolution rate by approximately 100 times relative to the physical mixture reference. The results suggest that for hydrophobic drugs, particle performance during dissolution is very sensitive to surface properties and not only to particle size. Co-milling with SLS prepares the surface for faster drug release than that achieved with direct mixing.

RESUMEN

In dissolution test, the surfactant sodium lauryl sulfate (SLS) is usually added to increase the dissolution of insoluble drugs and achieve the sink condition. However, the current study found that 0.1 % SLS would significantly decrease the dissolution of crystalline lurasidone hydrochloride (LH, a BCS Ⅱ drug). The aim of this study was to clarify the mechanism of this unexpected phenomenon and explore a strategy for mitigating the negative effect of SLS on the dissolution of LH. Sample characterizations (such as PLM, DSC, PXRD, IR and NMR) confirmed that the insoluble single-phase amorphous LH-SLS complex (with a single Tg at 35.2 °C) formed during dissolution in 0.1 % SLS aqueous solution via electrostatic interaction, tetrel bond interaction, and hydrophobic effect. Due to the plasticization effect of water, the transition of amorphous LH-SLS from its glassy state to viscous supercooled liquid state led to the gel formation, and suppressd the dissolution of LH. Meanwhile, the solubility curve of LH in SLS aqueous solution at various concentrations exhibited an unusual V-shaped feature, with the CMC value of SLS serving as the inflection point, since the gel degree was attenuated due to the micelle solubilization of SLS. Additionally, an innovative strategy was developed to alleviate the inhibiting effect of SLS on LH dissolution based on the potential competitive interactions. This study not only enriches the internal mechanism of surfactant-inhibited drug dissolution but also informs an effective strategy to mitigate the gelation.

Asunto(s)

RESUMEN

BACKGROUND: Sciadonic acid (SA) is an anti-inflammatory fatty acid displacing arachidonic acid (ARA) from specific phospholipid pools, thus modulating downstream pro-inflammatory lipid mediators. Its novel anti-inflammatory actions have been studied in vitro, in pre-clinical models, and stemming from testimonials, after topical- and oral application. It has not been tested in a formal clinical study for topical benefits previously. Skin barrier layer was our focus as it has a critically important role in maintaining skin moisture balance. METHODS: Herein, forearm skin was left undamaged; or barrier layer was chemically-damaged with 2% sodium lauryl sulfate (SLS) for 24 h. SLS-damaged skin was left untreated or treated with Delta-5® oil containing 24% SA twice daily for 27 days. Barrier function was assessed by open chamber transepidermal water loss (TEWL) and skin surface impedance on days 0 (clear skin), -1 (1-day post-SLS), -2 (2-days post-SLS, 1-day post-Delta-5), -3, -7, and - 28. RESULTS: Relative to day 1, Delta-5 oil statistically significantly decreased TEWL vs. untreated damaged sites, on days 3 (125% more reduced), -7 (74% more reduced), and - 28 (69% more reduced). Decreases in TEWL following chemical damage indicates improved skin barrier repair and healing. Similar patterns were quantified for skin impedance. There was also reduced redness observed on days 3 and - 7 with Delta-5 oil vs. untreated SLS-damaged skin. CONCLUSIONS: Delta-5 oil thus has anti-inflammatory potential in human skin, under controlled clinical conditions, to accelerate irritant-induced healing, and improve skin barrier function. Improvement in barrier function would benefit dermatitis, acne, eczema, and skin scarring. In normal skin, Delta-5 oil has potential to promote healthy, moisturized skin; and improve skin structure, elasticity, and firmness.

Asunto(s)

RESUMEN

To declare a shampoo toxicologically safe, one should evaluate the hazards posed by the inhalation of aerosols produced during its use. Herein, tap water was sprayed into a shampoo-filled plastic container to investigate the formation of shampoo aerosols and the possibility of their inhalation. The aerosols thus obtained had higher mass concentrations (geometric mean = 5779 µg m-3 (PM10) and 2249 µg m-3 (PM2.5)) than water aerosols (geometric mean = 927 µg m-3 (PM10) and 476 µg m-3 (PM2.5)). In particular, shampoo aerosol particles with an aerodynamic diameter of 2.5 µm, which can penetrate the alveoli when inhaled, had the highest mass concentration (geometric mean = 2000 µg m-3). The volatile organic compounds contained in shampoo aerosols featured alcohol and ether groups attached to dodecane and tetradecane backbones; these compounds were generated by the thermal decomposition of surfactants (i.e., lauryl and laureth sulfates) during instrumental analysis. The acquired data suggest that inhalation exposure and chronic inhalation toxicity evaluations should be performed for various shampoo usage conditions to ensure inhalation safety.

Asunto(s)