RESUMEN

Microbes are involved in a wide range of biological processes and are closely associated with disease. Inferring potential disease-associated microbes as the biomarkers or drug targets may help prevent, diagnose and treat complex human diseases. However, biological experiments are time-consuming and expensive. In this study, we introduced a new method called iPALM-GLMF, which modelled microbe-disease association prediction as a problem of non-negative matrix factorization with graph dual regularization terms and L 2 , 1 $$ {L}_{2,1} $$ norm regularization terms. The graph dual regularization terms were used to capture potential features in the microbe and disease space, and the L 2 , 1 $$ {L}_{2,1} $$ norm regularization terms were used to ensure the sparsity of the feature matrices obtained from the non-negative matrix factorization and to improve the interpretability. To solve the model, iPALM-GLMF used a non-negative double singular value decomposition to initialize the matrix factorization and adopted an inertial Proximal Alternating Linear Minimization iterative process to obtain the final matrix factorization results. As a result, iPALM-GLMF performed better than other existing methods in leave-one-out cross-validation and fivefold cross-validation. In addition, case studies of different diseases demonstrated that iPALM-GLMF could effectively predict potential microbial-disease associations. iPALM-GLMF is publicly available at https://github.com/LiangzheZhang/iPALM-GLMF.

Asunto(s)

RESUMEN

O3-type layered oxides hold significant promise as the material for cathodes in sodium-ion batteries for their favorable electrochemical properties, while irreversible structural degradation and harmful phase transitions during cyclic operation limit the practical application of these materials. In this work, we proposed a La3+/Al3+ codoping strategy in O3-Na(Ni1/3Mn1/3Fe1/3)O2 cathode materials and found that batteries with the Na (Ni1/3Mn1/3Fe1/3)0.998La0.001Al0.001O2 (NFM-La/Al) cathodes exhibited not only promoted capacity from 135.80 to 170.42 mAh g-1 at 0.2 C but also significantly enhanced cycling stability, with a 10% improvement in capacity retention compared with NFM cathodes after 300 cycles. Particularly, their rate performance was significantly improved as well. XRD and XPS tests indicated that La could expand the c-axis of NFM due to its larger ionic radius and thus significantly increased Na+ ion diffusion efficiency, and in addition, Al doping could effectively increase the content of Ni2+ and Mn4+ and thus greatly alleviated the negative Jahn-Teller effect caused by Mn3+. Moreover, consistent with XRD analyses, DFT calculations further substantiated the effectiveness of the La/Al codoping strategy by demonstrating the detailed atom substitution mechanism in the NFM crystal lattice. The boosted structure stability and Na+ diffusion kinetics may enhance the potential for practical applications of O3-type oxide cathodes.

RESUMEN

PURPOSE: This work demonstrates a new variant of the 3DREAM sequence for whole-brain B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping employing a three-dimensional (3D) stack-of-spirals readout. The spiral readout reduces the echo train length after the STEAM preparation in order to overcome the significant blurring in STE* images due to the decreasing STE* signal with each excitation pulse. METHODS: The 3DREAM sequence rapidly acquires two contrasts to calculate whole-brain flip angle maps. In the proposed spiral 3DREAM sequence, the Cartesian readout scheme is replaced by an accelerated 3D stack-of-spirals readout with a CAIPIRINHA sampling scheme. Phantom experiments were conducted to compare flip angle maps of the spiral 3DREAM sequence to a Cartesian 3DREAM sequence, an actual flip-angle-imaging (AFI) sequence, the dual-angle method, and the Bloch-Siegert shift method. Afterwards, the results were validated in vivo acquiring flip angle maps from five subjects. RESULTS: Flip angle maps of the spiral 3DREAM sequences showed high agreement with the reference methods both in phantom and in vivo experiments. Blurring in STE* images and flip angle maps was reduced compared to the Cartesian 3DREAM sequence. CONCLUSION: The spiral 3DREAM sequence utilizes a fast readout minimizing the echo train length of the imaging train. This reduces blurring in STE* images as well as the total acquisition time and increases the effective resolution of B 1 + $$ {\mathrm{B}}_1^{+} $$ maps.

RESUMEN

Three distinct MN1::BEND2 fusion-positive tumors in pediatric patients. (A) Clinical course for each patient was variable in part due to differences in initial diagnosis. Each patient responded favorably to gross total resection and is stable at last follow-up. (B) Histologic diversity, lack of prominent classical astroblastoma features, and variable immunoexpression of key markers makes microscopic diagnosis challenging.

RESUMEN

High-voltage LiNi0.5Mn1.5O4 (LNMO) cathodes suffer from severe capacity degradation during long-term cycling due the manganese dissolution and their high operating voltage (∼4.95 V), which pose serious challenges at the surface or interface. Moreover, both traditional ion-doping and passivation layer coating are difficult to apply consistently to LNMO cathode because of their complicated procedures, especially in large-scale production. To address these issues, a strategy employing HNO3/H2O2 leaching in synergy with a sintering process at a mid-temperature of 700 °C was used to achieve selective surface reconstruction. An optimal ratio of reactants was applied to balance the capacity and the cyclic stability of the LNMO cathode. The optimized valence composition of Mn on the material surface mitigates the occurrence of Jahn-Teller distortion, accompanied by a reasonable ratio of ordered and disordered phases and the concentration of oxygen vacancies after sintering, which improves the interface behavior between the electrode and electrolyte. This method delivers a high reversible capacity of 116.5 mAh g-1 after 200 cycles at 0.5 C (1 C = 147 mAh g-1) with a capacity retention of 91.30% and 110 mAh g-1 with a remarkably high capacity retention of 86.85% after 500 cycles at 2 C. This balanced approach, utilizing the protective effects of oxidation (O22-) and the erosive action of acid (H+), is proposed to achieve regional surface reconstruction of advanced LNMO cathode. This opens up a strategy for improving oxide-based cathode materials with low cost and mass production capability, especially favoring high consistency.

RESUMEN

PURPOSE: This study aims to map the transmit magnetic field ( B 1 + $$ {B}_1^{+} $$ ) in the human body at 7T using MR fingerprinting (MRF), with a focus on achieving high accuracy and precision across a large dynamic range, particularly at low flip angles (FAs). METHODS: A FLASH-based MRF sequence (B1-MRF) with high B 1 + $$ {B}_1^{+} $$ sensitivity was developed. Phantom and in vivo abdominal imaging were performed at 7T, and the results were compared with established reference methods, including a slow but precise preparation-based method (PEX), saturated TurboFLASH (satTFL), actual flip angle imaging (AFI) and Bloch-Siegert shift (BSS). RESULTS: The MRF signal curve was highly sensitive to B 1 + $$ {B}_1^{+} $$ , while T1 sensitivity was comparatively low. The phantom experiment showed good agreement of B 1 + $$ {B}_1^{+} $$ to PEX for a T1 range of 204-1691 ms evaluated at FAs from 0° to 70°. Compared to the references, a dynamic range increase larger than a factor of two was determined experimentally. In vivo liver scans showed a strong correlation between B1-MRF, satTFL, and RPE-AFI in a low body mass index (BMI) subject (18.1 kg/m2). However, in larger BMI subjects (≥25.5 kg/m2), inconsistencies were observed in low B 1 + $$ {B}_1^{+} $$ regions for satTFL and RPE-AFI, while B1-MRF still provided consistent results in these regions. CONCLUSION: B1-MRF provides accurate and precise B 1 + $$ {B}_1^{+} $$ maps over a wide range of FAs, surpassing the capabilities of existing methods in the FA range < 60°. Its enhanced sensitivity at low FAs is advantageous for various applications requiring precise B 1 + $$ {B}_1^{+} $$ estimates, potentially advancing the frontiers of ultra-high field (UHF) body imaging at 7T and beyond.

RESUMEN

BACKGROUND: Intellectual disability (ID) is a neurodevelopmental condition affecting around 2% of children and young adults worldwide, characterized by deficits in intellectual functioning and adaptive behavior. Genetic factors contribute to the development of ID phenotypes, including mutations and structural changes in chromosomes. Pathogenic variants in the HCFC1 gene cause X-linked mental retardation syndrome, also known as Siderius type X-linked mental retardation. The MN1 gene is necessary for palate development, and mutations in this gene result in a genetic condition called CEBALID syndrome. METHODS: Exome sequencing was used to identify the disease-causing variants in two affected families, A and B, from various regions of Pakistan. Affected individuals in these two families presented ID, developmental delay, and behavioral abnormalities. The validation and co-segregation analysis of the filtered variant was carried out using Sanger sequencing. RESULTS: In an X-linked family A, a novel hemizygous missense variant (c.5705G > A; p.Ser1902Asn) in the HCFC1 gene (NM_005334.3) was identified, while in family B exome sequencing revealed a heterozygous nonsense variant (c.3680 G > A; p. Trp1227Ter) in exon-1 of the MN1 gene (NM_032581.4). Sanger sequencing confirmed the segregation of these variants with ID in each family. CONCLUSIONS: The investigation of two Pakistani families revealed pathogenic genetic variants in the HCFC1 and MN1 genes, which cause ID and expand the mutational spectrum of these genes.

Asunto(s)

RESUMEN

Lithium supply risk is increasing and driving rapid progress in lithium recovery schemes from spent lithium-ion batteries (LIBs). In this study, a facile recycling process consisting mainly of reduction roasting and NaHCO3 leaching was adopted to improve lithium recovery. The Li of spent LiNixCoyMn1-x-yO2 powder were converted to Li2CO3 and LiAlO2 with the reduction effect of C and residual Al in the roasting process. NaHCO3 leaching was utilized to selectively dissolve lithium from Li2CO3 and water-insoluble LiAlO2. The activation energy of NaHCO3 leaching was 9.31 kJ∙mol-1 and the leaching of lithium was a diffusion control reaction. More than 95.19 % lithium was leached and recovered as a Li2CO3 product with a purity of 99.80 %. Thus, this approach provides a green path to selective recovery of lithium with good economics.

Asunto(s)

RESUMEN

There is an urgent need for lithium-ion batteries with high energy density to meet the increasing demand for advanced devices and ecofriendly electric vehicles. Spinel LiNi0.5Mn1.5O4 (LNMO) is the most promising cathode material for achieving high energy density due to its high operating voltage (4.75 V vs Li/Li+) and impressive capacity of 147 mAh g-1. However, the binders conventionally used are prone to high potential and oxidation at the cathode side, resulting in a loss of the ability to bond active material and conductive agent integrity. This can lead to severe capacity fading and irreversible battery failure. This study demonstrates that incorporating acrylic anhydride and methyl methacrylate into conventional acrylonitrile through solution polymerization improves the binding energy and voltage resistance. The results indicate that the triblock poly(acrylonitrile-methyl methacrylate-acrylic anhydride) (PAMA) binder has a much higher peeling strength (0.506 N cm-1) compared to its polyvinylidene fluoride (PVDF) counterpart (0.3 N cm-1), making it a more feasible strategy. When assembled with LiNi0.5Mn1.5O4, the PAMA based electrode maintains a capacity retention of 70.7% after 800 cycles at 0.1 C, which is significantly higher than the 33.9% retention of the PVDFbased electrode. This is due to the large number of polar groups, including ─C≡N and ─C═O, on PAMA, which are conducive to adsorbing lithium polysulfide. The S@PAMA electrode is tested and maintained a capacity value of 628.7 mAh g-1 after long-term cycling, confirming its ability to effectively suppress the shuttle effect.

RESUMEN

PURPOSE: To develop and evaluate a robust cardiac B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping sequence at 3 T, using Bloch-Siegert shift (BSS)-based preparations. METHODS: A longitudinal magnetization preparation module was designed to encode | B 1 + | $$ \mid {\mathrm{B}}_1^{+}\mid $$ . After magnetization tip-down, off-resonant Fermi pulses, placed symmetrically around two refocusing pulses, induced BSS, followed by tipping back of the magnetization. Bloch simulations were used to optimize refocusing pulse parameters and to assess the mapping sensitivity. Relaxation-induced B 1 + $$ {\mathrm{B}}_1^{+} $$ error was simulated for various T 1 $$ {\mathrm{T}}_1 $$ / T 2 $$ {\mathrm{T}}_2 $$ times. The effective mapping range was determined in phantom experiments, and | B 1 + | $$ \mid {\mathrm{B}}_1^{+}\mid $$ maps were compared to the conventional BSS method and subadiabatic hyperbolic-secant 8 (HS8) pulse-sensitized method. Cardiac B 1 + $$ {\mathrm{B}}_1^{+} $$ maps were acquired in healthy subjects, and evaluated for repeatability and imaging plane intersection consistency. The technique was modified for three-dimensional (3D) acquisition of the whole heart in a single breath-hold, and compared to two-dimensional (2D) acquisition. RESULTS: Simulations indicate that the proposed preparation can be tailored to achieve high mapping sensitivity across various B 1 + $$ {\mathrm{B}}_1^{+} $$ ranges, with maximum sensitivity at the upper B 1 + $$ {\mathrm{B}}_1^{+} $$ range. T 1 $$ {\mathrm{T}}_1 $$ / T 2 $$ {\mathrm{T}}_2 $$ -induced bias did not exceed 5.2 % $$ \% $$ . Experimentally reproduced B 1 + $$ {\mathrm{B}}_1^{+} $$ sensitization closely matched simulations for B 1 + ≥ 0 . 3 B 1 , max + $$ {\mathrm{B}}_1^{+}\ge 0.3{\mathrm{B}}_{1,\max}^{+} $$ (mean difference 0.031 ± $$ \pm $$ 0.022, compared to 0.018 ± $$ \pm $$ 0.025 in the HS8-sensitized method), and showed 20-fold reduction in the standard deviation of repeated scans, compared with conventional BSS B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping, and an equivalent 2-fold reduction compared with HS8-sensitization. Robust cardiac B 1 + $$ {\mathrm{B}}_1^{+} $$ map quality was obtained, with an average test-retest variability of 0.027 ± $$ \pm $$ 0.043 relative to normalized B 1 + $$ {\mathrm{B}}_1^{+} $$ magnitude, and plane intersection bias of 0.052 ± $$ \pm $$ 0.031. 3D acquisitions showed good agreement with 2D scans (mean absolute deviation 0.055 ± $$ \pm $$ 0.061). CONCLUSION: BSS-based preparations enable robust and tailorable 2D/3D cardiac B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping at 3 T in a single breath-hold.

RESUMEN

PURPOSE: To optimize Relaxation along a Fictitious Field (RAFF) pulses for rotating frame relaxometry with improved robustness in the presence of B 0 $$ {\mathrm{B}}_0 $$ and B 1 + $$ {\mathrm{B}}_1^{+} $$ field inhomogeneities. METHODS: The resilience of RAFF pulses against B 0 $$ {\mathrm{B}}_0 $$ and B 1 + $$ {\mathrm{B}}_1^{+} $$ inhomogeneities was studied using Bloch simulations. A parameterized extension of the RAFF formulation was introduced and used to derive a generalized inhomogeneity-resilient RAFF (girRAFF) pulse. RAFF and girRAFF preparation efficiency, defined as the ratio of the longitudinal magnetization before and after the preparation ( M z ( T p ) / M 0 $$ {M}_z\left({T}_p\right)/{M}_0 $$ ), were simulated and validated in phantom experiments. T RAFF $$ {T}_{\mathrm{RAFF}} $$ and T girRAFF $$ {T}_{\mathrm{girRAFF}} $$ parametric maps were acquired at 3T in phantom, the calf muscle, and the knee cartilage of healthy subjects. The relaxation time maps were analyzed for resilience against artificially induced field inhomogeneities and assessed in terms of in vivo reproducibility. RESULTS: Optimized girRAFF preparations yielded improved preparation efficiency (0.95/0.91 simulations/phantom) with respect to RAFF (0.36/0.67 simulations/phantom). T girRAFF $$ {T}_{\mathrm{girRAFF}} $$ preparations showed in phantom/calf 6.0/4.8 times higher resilience to B 0 $$ {\mathrm{B}}_0 $$ inhomogeneities than RAFF, and a 4.7/5.3 improved resilience to B 1 + $$ {\mathrm{B}}_1^{+} $$ inhomogeneities. In the knee cartilage, T girRAFF $$ {T}_{\mathrm{girRAFF}} $$ (53 ± $$ \pm $$ 14 ms) was higher than T RAFF $$ {T}_{\mathrm{RAFF}} $$ (42 ± $$ \pm $$ 11 ms). Moreover, girRAFF preparations yielded 7.6/4.9 times improved reproducibility across B 0 $$ {\mathrm{B}}_0 $$ / B 1 + $$ {\mathrm{B}}_1^{+} $$ inhomogeneity conditions, 1.9 times better reproducibility across subjects and 1.2 times across slices compared with RAFF. Dixon-based fat suppression led to a further 15-fold improvement in the robustness of girRAFF to inhomogeneities. CONCLUSIONS: RAFF pulses display residual sensitivity to off-resonance and pronounced sensitivity to B 1 + $$ {\mathrm{B}}_1^{+} $$ inhomogeneities. Optimized girRAFF pulses provide increased robustness and may be an appealing alternative for applications where resilience against field inhomogeneities is required.

RESUMEN

PURPOSE: The transverse relaxation time T 2 $$ {}_2 $$ holds significant relevance in clinical applications and research studies. Conventional T 2 $$ {}_2 $$ mapping approaches rely on spin-echo sequences, which require lengthy acquisition times and involve high radiofrequency (RF) power deposition. An alternative gradient echo (GRE) phase-based T 2 $$ {}_2 $$ mapping method, utilizing steady-state acquisitions at one small RF spoil phase increment, was recently demonstrated. Here, a modified magnitude- and phase-based T 2 $$ {}_2 $$ mapping approach is proposed, which improves T 2 $$ {\mathrm{T}}_2 $$ estimations by simultaneous fitting of T 1 $$ {\mathrm{T}}_1 $$ and signal amplitude ( A ∝ P D $$ A\propto PD $$ ) at three or more RF spoiling phase increments, instead of assuming a fixed T 1 $$ {\mathrm{T}}_1 $$ value. METHODS: The feasibility of the magnitude-phase-based method was assessed by simulations, in phantom and in vivo experiments using skipped-CAIPI three-dimensional-echo-planar imaging (3D-EPI) for rapid GRE imaging. T 2 $$ {\mathrm{T}}_2 $$ , T 1 $$ {\mathrm{T}}_1 $$ and PD estimations obtained by our method were compared to T 2 $$ {\mathrm{T}}_2 $$ of the phase-based method and T 1 $$ {\mathrm{T}}_1 $$ and PD of spoiled GRE-based multi-parameter mapping using a multi-echo version of the same sequence. RESULTS: The agreement of the proposed T 2 $$ {\mathrm{T}}_2 $$ with ground truth and reference T 2 $$ {\mathrm{T}}_2 $$ values was higher than that of phase-based T 2 $$ {\mathrm{T}}_2 $$ in simulations and in phantom data. While phase-based T 2 $$ {\mathrm{T}}_2 $$ overestimation increases with actual T 2 $$ {\mathrm{T}}_2 $$ and T 1 $$ {\mathrm{T}}_1 $$ , the proposed method is accurate over a large range of physiologically meaningful T 2 $$ {\mathrm{T}}_2 $$ and T 1 $$ {\mathrm{T}}_1 $$ values. At the same time, precision is improved. In vivo results were in line with these observations. CONCLUSION: Accurate magnitude-phase-based T 2 $$ {}_2 $$ mapping is feasible in less than 5 min scan time for 1 mm nominal isotropic whole-head coverage at 3T and 7T.

RESUMEN

We aim to assess a straightforward technique to enhance spectral quality in the brain, particularly in the cerebellum, during 7 T MRI scans. This is achieved through a wireless RF array insert designed to mitigate signal dropouts caused by the limited transmit field efficiency in the inferior part of the brain. We recently developed a wireless RF array to improve MRI and 1H-MRS at 7 T by augmenting signal via inductive coupling between the wireless RF array and the MRI coil. In vivo experiments on a Siemens 7 T whole-body human scanner with a Nova 1Tx/32Rx head coil quantified the impact of the dorsal cervical array in improving signal in the posterior fossa, including the cerebellum, where the transmit efficiency of the coil is inherently low. The 1H-MRS experimental protocol consisted of paired acquisition of data sets, both with and without the RF array, using the semi-LASER and SASSI sequences. The overall results indicate that the localized 1H-MRS is improved significantly in the presence of the array. Comparison of in vivo 1H-MRS plots in the presence versus absence of the array demonstrated an average SNR enhancement of a factor of 2.2. LCModel analysis reported reduced Cramér-Rao lower bounds, indicating more confident fits. This wireless RF array can significantly increase detection sensitivity. It may reduce the RF transmission power and data acquisition time for 1H-MRS and MRI applications, specifically at 7 T, where 1H-MRS requires a high-power RF pulse. The array could provide a cost-effective and efficient solution to improve detection sensitivity for human 1H-MRS and MRI in the regions with lower transmit efficiency.

RESUMEN

PURPOSE: To investigate the impact of reduced k-space sampling on B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping and the resulting impact on phase shimming and dynamic/universal parallel transmit (pTx) RF pulse design. METHODS: Channel-wise 3D B 1 + $$ {\mathrm{B}}_1^{+} $$ maps were measured at 7 T in 35 and 23 healthy subjects for the heart and prostate region, respectively. With these B 1 + $$ {\mathrm{B}}_1^{+} $$ maps, universal phase shims optimizing homogeneity and B 1 + $$ {\mathrm{B}}_1^{+} $$ efficiency were designed for heart and prostate imaging. In addition, universal 4kT-point pulses were designed for the heart. Subsequently, individual phase shims and individual 4kT-pulses were designed based on B 1 + $$ {\mathrm{B}}_1^{+} $$ maps with different acceleration factors and tested on the original maps. The performance of the pulses was compared by evaluating their coefficients of variation (CoV), B 1 + $$ {\mathrm{B}}_1^{+} $$ efficiencies and specific energy doses (SED). Furthermore, validation measurements were carried out for one heart and one prostate subject. RESULTS: For both organs, the universal phase shims showed significantly higher B 1 + $$ {\mathrm{B}}_1^{+} $$ efficiencies and lower CoVs compared to the vendor provided default shim, but could still be improved with individual phase shims based on accelerated B 1 + $$ {\mathrm{B}}_1^{+} $$ maps (acquisition time = 30 s). In the heart, the universal 4kT-pulse achieved significantly lower CoVs than tailored phase shims. Tailored 4kT-pulses based on accelerated B 1 + $$ {\mathrm{B}}_1^{+} $$ maps resulted in even further reduced CoVs or a 2.5-fold reduction in SED at the same CoVs as the universal 4kT-pulse. CONCLUSION: Accelerated B 1 + $$ {\mathrm{B}}_1^{+} $$ maps can be used for the design of tailored pTx pulses for prostate and cardiac imaging at 7 T, which further improve homogeneity, B 1 + $$ {\mathrm{B}}_1^{+} $$ efficiency, or SED compared to universal pulses.

Asunto(s)

RESUMEN

PURPOSE: To acquire accurate volumetric multi-channel B 1 + $$ {\mathrm{B}}_1^{+} $$ maps in under 14 s whole-brain or 23 heartbeats whole-heart for parallel transmit (pTx) applications at 7 T. THEORY AND METHODS: We evaluate the combination of three recently proposed techniques. The acquisition of multi-channel transmit array B 1 + $$ {\mathrm{B}}_1^{+} $$ maps is accelerated using transmit low rank (TxLR) with absolute B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping (Sandwich) acquired in a B 1 + $$ {\mathrm{B}}_1^{+} $$ time-interleaved acquisition of modes (B1TIAMO) fashion. Simulations using synthetic body images derived from Sim4Life were used to test the achievable acceleration for small scan matrices of 24 × 24. Next, we evaluated the method by retrospectively undersampling a fully sampled B 1 + $$ {\mathrm{B}}_1^{+} $$ library of nine subjects in the brain. Finally, Cartesian undersampled phantom and in vivo images were acquired in both the brain of three subjects (8Tx/32 receive [Rx]) and the heart of another three subjects (8Tx/8Rx) at 7 T. RESULTS: Simulation and in vivo results show that volumetric multi-channel B 1 + $$ {\mathrm{B}}_1^{+} $$ maps can be acquired using acceleration factors of 4 in the body, reducing the acquisition time to within 23 heartbeats, which was previously not possible. In silico heart simulations demonstrated a RMS error to the fully sampled native resolution ground truth of 4.2° when combined in first-order circularly polarized mode (mean flip angle 66°) at an acceleration factor of 4. The 14 s 3D B 1 + $$ {\mathrm{B}}_1^{+} $$ maps acquired in the brain have a RMS error of 1.9° to the fully sampled (mean flip angle 86°). CONCLUSION: The proposed method is demonstrated as a fast pTx calibration technique in the brain and a promising method for pTx calibration in the body.

Asunto(s)

RESUMEN

High-voltage LiNi0.5Mn1.5O4 (LNMO) spinel oxides are highly promising cobalt-free cathode materials to cater to the surging demand for lithium-ion batteries (LIBs). However, commercial application of LNMOs is still challenging despite decades of research. To address the challenge, the understanding of their crystallography and structural evolutions during synthesis and electrochemical operation is critical. This review aims to illustrate and to update the fundamentals of crystallography, phase transition mechanisms, and electrochemical behaviors of LNMOs. First, the research history of LNMO and its development into a LIB cathode material is outlined. Then the structural basics of LNMOs including the classic and updated views of the crystal polymorphism, interconversion between the polymorphs, and structure-composition relationship is reviewed. Afterward, the phase transition mechanisms of LNMOs that connect structural and electrochemical properties are comprehensively discussed from fundamental thermodynamics to operando dynamics at intra- and inter-particle levels. In addition, phase evolutions during overlithiation as well as thermal-/electrochemical-driven phase transformations of LNMOs are also discussed. Finally, recommendations are offered for the further development of LNMOs as well as other complex materials to unlock their full potential for future sustainable and powerful batteries.

RESUMEN

Supramolecular chemistry is a fascinating field that explores the interactions between molecules to create higher-order structures. In the case of the supramolecular chain of Fuchsine acid, which is a type of dye molecule, several chemical applications are possible. Fuchsine acid helps to make better medicine carriers that deliver drugs where they're needed in the body, making treatments more effective and reducing side effects. It also helps create smart materials like sensors and self-fixing plastics, which are useful in electronics, keeping our environment clean, and making new materials. In sensing and detection, the supramolecular chain of Fuchsine acid utilizes as a sensor or detector for specific analyzes. In drug delivery, the supramolecular chains of Fuchsine acid incorporated into drug delivery systems. In recent years, a common method is linking a graph to a chemical structure and using topological descriptors to study it. This technique is becoming increasingly important over time. Topological descriptors gives very useful information while studying the topology of chemical graph. In this paper, we have computed the 3D structure of supramolecular graph of Fuchsine acid. We have computed an explicit expressions of ABC index, GA index, General Randi c ´ index, first and second Zagreb index, hyper Zagreb index, H-index and F-index of supramolecular structure of Fushine acid.

RESUMEN

High voltage cobalt-free spinel LiNi0.5Mn1.5O4 (LNMO) is well organized as a high-power cathode material for lithium (Li)-ion batteries, however, the weak interaction between the 3d orbital of the transition metal (TM) ions and the 2p orbital of oxygen (O) leads to the instability of crystal structural, hindering the long-term stable cycling of LNMO cathode especially at high temperatures. Here, a design strategy of orbital interaction is initiated to strengthen TM 3d-O 2p framework in P-doped LNMO (P-LNMO) by choosing phytic acid as P dopant, which can realize more uniform doping compared to regular phosphate. The results show that the enhancement of TM 3d-O 2p orbital interaction in P-LNMO can suppress the Jahn-Teller effect and subsequent dissolution of Mn, as well as lowers the energy barrier for Li ion insertion/extraction kinetics. As a result, superior electrochemical performances including high discharge capacity, stable cycling behavior and enhanced rate capability of P-LNMO are obtained. Significantly, the P-LNMO pouch cell shows great cycling stability with 97.4% capacity retention after 100 cycles.

RESUMEN

A sodium bis(fluorosulfonyl)imide (NaFSI)-based multifunctional electrolyte is developed by partially replacing NaPF6 salt in the electrolyte to improve the wide temperature range working capability of NaNi1/3Fe1/3Mn1/3O2/hard carbon (NNFM111/HC) sodium-ion batteries (SIBs). The capacity retention of the SIBs with NaFSI-NaPF6 dual salt electrolyte increases from 47.2 % to 75.5 % after 250 cycles at 25 °C, and from 51.0 % to 82.3 % after 80 cycles at 45 °C, and the 1 C discharge capacity retention at the low temperature of -20 °C also increases 26.8 %. In the single salt system, NaPF6 effectively passivate the aluminum foil and NaFSI passivate the electrode/electrolyte interface. The synergistic effect of NaPF6 and NaFSI greatly improves the battery performance in a wide temperature range. This NaFSI-based dual salt electrolyte also effectively overcomes the flaws when the SIBs using NaFSI or NaPF6 independently, and makes it more suitable for SIBs, indicating promising prospects in the commercial application of NNFM111/HC SIBs.