RESUMEN

Innovative and eco-friendly methodologies for the determination of phenolic compounds, showing a paradigm shift in analytical chemistry toward sustainability. Phenolic compounds, valued for their diverse health benefits, have historically been analyzed using methods that often involve hazardous solvents and energy-intensive processes. This review focuses on green analytical chemistry principles, emphasizing sustainability, reduced environmental impact, and analytical efficiency. The use of DES, specifically Ch: Chl-based DES, emerges as a prominent green alternative for extracting phenolic compounds from various sources. The integration of UAE with DES enhances extraction efficiency, contributing to a more sustainable analytical approach. Furthermore, the review highlights the significance of DLLME and SPME in reducing solvent consumption and simplifying extraction procedures. These techniques exemplify the commitment to making phenolic compound analysis environmentally friendly. The incorporation of portable measurement tools, such as smartphones, into analytical methodologies is a notable aspect discussed in the review. Techniques like UA-DLLME leverage portable devices, making phenolic compound determination more accessible and versatile. Anticipating the future, the review foresees ongoing advancements in sustainable analytical approaches, driven by collaborative efforts across diverse disciplines. Novel solvents, extraction techniques, and portable measurement methods are expected to play pivotal roles in the continuous evolution of green analytical methodologies for the analysis of phenolic compounds. The review encapsulates a transformative journey toward environmentally responsible and efficient analytical practices, paving the way for further research and application in diverse analytical settings.

RESUMEN

Sample preparation is essential for low-level compound determination. In the present work, supported liquid extraction (SLE) was used as sample preparation for the low-level determination of a new TLR7 agonist imiquimod compound, LFX453. Samples were extracted on ISOLUTE® SLE 96-well plates using tert-butyl-methyl ether followed by evaporation and dry residue reconstitution with 150 µl of a mixture of 0.1% formic acid in acetonitrile-water (50/50, v/v). Samples were eluted using a flow rate of 0.750 ml/min on a C18 column (50 × 2.1 mm, 2.7 µm) with a mobile phase consisting of 0.1% formic acid in water (A) and 0.1% formic acid in acetonitrile (B). Tandem mass spectrometry was used to analyze the samples in positive mode. The method run time was 6.5 min, and the low limit of quantification was 1.00 pg/ml with 0.100 ml of minipig plasma. Intra-run and inter-run precision and accuracy were within the acceptance criteria at four concentration levels over a concentration ranging from 1.00 to 200 pg/ml. There was no matrix effect and recovery, three freeze-thaw cycles and incurred samples reanalysis were validated. The method was successfully applied for measuring LFX453 in minipig plasma after application on minipig skin.

Asunto(s)

RESUMEN

Heating edible oils generates aldehydes, potentially leading to adverse health effects, making their analysis essential for quality control. This study presents a convenient miniaturized kapok fiber-supported liquid-phase extraction/in-situ derivatization method for the simultaneous extraction and derivatization of aldehydes in oils. The method involves placing 150 mg oil into a 1 mL pipette tip packed with 25 mg kapok fiber, adding 150 µL ACN with 1.5 mg mL-1 DNPH, and post 30-minute static extraction, retrieving the extractant with a pipettor for liquid chromatography-tandem mass spectrometry analysis. By optimizing critical parameters through a Box-Behnken design, the method exhibits good linearity (1-500 ng g-1, R2 ≥ 0.991), low detection limits (0.2-1.0 ng g-1), excellent accuracy (95.3-107.1%) and high precisions (relative standard deviation < 7.9%). This method simplifies sample preparation processes, cuts solvent use, and facilitates automation. It effectively identifies ten aldehyde variations in six heated oils, displaying distinct profiles consistent with prior research.

Asunto(s)

Asunto(s)

RESUMEN

The review presents an evaluation of the development of on-line, at-line and in-line sample treatment coupled with capillary and microchip electrophoresis over the last 10 years. In the first part, it describes different types of flow-gating interfaces (FGI) such as cross-FGI, coaxial-FGI, sheet-flow-FGI, and air-assisted-FGI and their fabrication using molding into polydimethylsiloxane and commercially available fittings. The second part deals with the coupling of capillary and microchip electrophoresis with microdialysis, solid-phase, liquid-phase, and membrane based extraction techniques. It mainly focuses on modern techniques such as extraction across supported liquid membrane, electroextraction, single drop microextraction, head space microextraction, and microdialysis with high spatial and temporal resolution. Finally, the design of sequential electrophoretic analysers and fabrication of SPE microcartridges with monolithic and molecularly imprinted polymeric sorbents are discussed. Applications include the monitoring of metabolites, neurotransmitters, peptides and proteins in body fluids and tissues to study processes in living organisms, as well as the monitoring of nutrients, minerals and waste compounds in food, natural and wastewater.

Asunto(s)

RESUMEN

Approximately 11.4 million tonnes of solid by-products and an increased amount of waste water will be generated during the 2020/21 coffee harvest. There are currently no truly value-adding uses for these potentially environmentally threatening species. This work presents the most wide-ranging chemical investigation of coffee by-products collected from farms to factories, including eight never previously investigated. Twenty compounds were found for the first time in coffee by-products including the bioactive neomangiferin, kaempferol-3-O-rutinoside, lup-20(29)-en-3-one and 3,4-dimethoxy cinnamic acid. Five by-products generated inside a factory showed caffeine (53.0-17.0 mg.g-1) and/or chlorogenic acid (72.9-10.1 mg.g-1) content comparable to coffee beans, while mature leaf from plant pruning presented not only high contents of both compounds (16.4 and 38.9 mg.g-1, respectively), but also of mangiferin (19.4 mg.g-1) besides a variety of flavonoids. Such by-products are a source of a range of bioactive compounds and could be explored with potential economic and certainly environmental benefits.

Asunto(s)

RESUMEN

In this work, a syringe needle-based integrated method was designed for the detection of biogenic amines (BAs) in raw meat samples. Based on a sequential process, the needle-based sampling, micro liquid-phase extraction and peroxidase-like catalysis were adopted for the sample collection, target analytes extraction and colorimetric analysis, respectively. The proposed method exhibited high selectivity towards BAs (the total amount of histamine, putrescine and cadaverine was utilized to present the level of BAs), where the linear range is 5-50 µM and 50-1000 µM, and the limit of detection is 1.52 µM. Specifically, the whole process could be completed in a single syringe needle. In addition, due to the minimized sampling, the change of BAs levels with time in different area of real samples (fish) can be conveniently investigated. This method has the advantages of simplicity, low cost, high sensitivity and selectivity, endowing it a promising candidate for food analysis.

Asunto(s)

RESUMEN

Understanding the interaction of ions with organic receptors in confined space is of fundamental importance and could advance nanoelectronics and sensor design. In this work, metal ion complexation of conformationally varied thiacalix[4]monocrowns bearing lower-rim hydroxy (type I), dodecyloxy (type II), or methoxy (type III) fragments was evaluated. At the liquid-liquid interface, alkylated thiacalixcrowns-5(6) selectively extract alkali metal ions according to the induced-fit concept, whereas crown-4 receptors were ineffective due to distortion of the crown-ether cavity, as predicted by quantum-chemical calculations. In type-I ligands, alkali-metal ion extraction by the solvent-accessible crown-ether cavity was prevented, which resulted in competitive Ag+ extraction by sulfide bridges. Surprisingly, amphiphilic type-I/II conjugates moderately extracted other metal ions, which was attributed to calixarene aggregation in salt aqueous phase and supported by dynamic light scattering measurements. Cation-monolayer interactions at the air-water interface were monitored by surface pressure/potential measurements and UV/visible reflection-absorption spectroscopy. Topology-varied selectivity was evidenced, towards Sr2+ (crown-4), K+ (crown-5), and Ag+ (crown-6) in type-I receptors and Na+ (crown-4), Ca2+ (crown-5), and Cs+ (crown-6) in type-II receptors. Nuclear magnetic resonance and electronic absorption spectroscopy revealed exocyclic coordination in type-I ligands and cation-π interactions in type-II ligands.

Asunto(s)

RESUMEN

Objective To establish a convenient and efficient method to detect Environmental endocrine disruptors (EDCs) in atmospheric particulate matter. Methods Atmospheric total suspended particles (TSP) was sampled through glass fiber filter paper in a medium-flow TSP sampler at a flow rate  of 100L/min for 2 hours. The filter paper sample was then subjected to the treatments as follows: (1) The samples were extracted with acetone and dichloromethane (3:2,v/v) from glass fiber filter paper. (2) Ultrasonic cleaning for 30 minutes. (3) Centrifugation at 2,500r/min for 20 minutes. (4) The supernatant was dried out in water baths at 55℃, and then acetonitrile was added to make the volume constant. Chromatographic condition was : HPLC-FLD ( λex=275nm，λem=312nm) . Results The content of OP, NP and BPA in the standard series showed a good linear relationship with their respective peak areas, and all the correlation coefficients were greater than 0.99. The detection limits for BPA, OP, NP were 9.80 ng/ml, 5.60 ng/ml, and 5.30 ng/ml, respectively, and the recoveries were 92.10%~127.00%, 83.90%~97.40%, and 83.70%~101.20%, respectively. The RSD for the inter-and intra-day was less than 5%. Conclusion The method was simple, rapid, and accurate, which could be used for the detection of environmental endocrine disruptors in atmospheric particulate matter.

RESUMEN

From an environmental perspective, searching for useful compounds in agri-food by-products by employing inefficient and polluting analytical procedures is paradoxical. This work aimed to develop a green, simplified, and highly efficient experimental setup for extracting and tentatively identifying the broadest range of metabolites in sugarcane solid by-products collected directly within the industrial mills. Nine different extraction approaches were investigated side-by-side, including three reference methods. Based on the extraction and environmental performances assessed by two complementary metrics called Analytical-Eco Scale and the Analytical Greenness Calculator, it was possible to reach two highly efficient two liquid-phase extractions while avoiding harmful solvents and traditional time, energy, and solvent consuming sample preparation steps, such as solvent evaporation, metabolite concentration, re-suspension, and derivatization. The simultaneously produced hydroethanolic and n-heptane extracts were directly analyzed by ultra-high-performance liquid chromatography and gas chromatography, both coupled to mass spectrometry, respectively, leading to the annotation of a large dynamic range of compounds from information rich spectral data. Up to 111 metabolites were identified in a single matrix, from highly polar sucrose to nonpolar wax ester C53 in a single extraction. Orientin, apigenin-6-C-glucosylrhamnoside, 1-octacosanol, octacosanal, and other bioactive compounds were identified in these abundantly available by-products, which are currently just burned to produce energy. The best two methods developed here (Two-Liquid-Phase Ultrasound-Assisted Extraction with Probe and Two-Liquid-Phase Dynamic Maceration) appeared as a green, simplified, and highly efficient procedures to qualitatively profile metabolites in complex solid matrices.

Asunto(s)

RESUMEN

Quantitative measurement of process-related impurities is a critical safety requirement for the production of drug substances of vaccine and therapeutic biologics. A simple and sensitive HPLC method has been developed for separation and quantitation of residual valproic acid (VPA) used in the cell transfection procedure for the manufacturing of an influenza vaccine. The method is comprised of a modified Dole liquid phase extraction followed by a quick pre-column derivatization using 2-bromoacetophenone. Nonanoic acid (NNA) is used as the internal standard (IS) and the quantification is performed by reversed-phase liquid chromatography. This new method can accurately measure as low as 6.8 µg/mL (LOQ) residual VPA in the vaccine drug substance.

Asunto(s)

RESUMEN

A prenatal noninvasive genetic screening test that yields a positive result typically warrants further direct assessment of fetal DNA following an invasive procedure. The precious nature of these invasively acquired samples, combined with the time sensitive nature with which results should be reported, demands that the methodologies used for analysis be quick, efficient, and dependable.Prenatal diagnosis has been performed using DNA extracted from amniotic fluid and chorionic villi for several decades, and more recently methodologies have been developed to extract cell free fetal DNA from amniotic fluid. DNA extraction methodologies in these matrices should reliably and reproducibly isolate a sufficient quality and quantity of DNA for the intended downstream application, and make it possible to purify and concentrate samples that may arrive with suboptimal quality or quantity.Phenol-Chloroform extraction followed by DNA precipitation in ethanol has historically been used for prenatal samples, but this methodology is labor intensive, time consuming, and requires use of toxic chemicals. There are now commercially available, solid phase-based kits for rapid and reproducible DNA extraction and purification, enabling simultaneous extraction of a large number of samples. Commercial kits are available for a variety of sample matrices including all prenatal specimen types, although other methodologies including organic or inorganic liquid phase extraction may also be utilized.Here, we describe extraction using both commercially available kits for direct amniocytes and chorionic villi and cell free fetal DNA derived from amniotic fluid, as well as inorganic liquid phase extraction for tissue culture of amniocytes, CVS, and products of conception.

Asunto(s)

RESUMEN

In this work, a general and novel separation technique gas-assisted three-liquid-phase extraction was established and applied in separating and concentrating isoflavonoids from the actual sample of puerariae extract by one step. For the gas-assisted three-liquid-phase extraction method, optimal conditions were selected: polyethylene glycol 2000 and ethyl acetate as the flotation solvent, pH 5, (NH4 )2 SO4 concentration 350 g/L in aqueous phase, N2 flow rate 30 mL/min, flotation time 50 min, and flotation twice. Five isoflavonoids compounds puerarin, 3'-methoxydaidzin, puerarinxyloside, daidzin and daidzein were separated with recoveries of 82, 84, 80, 88 and 89%, respectively. The separated products were purified by preparative high-performance liquid chromatography, and the purity of the final products was >96%. The established general gas-assisted three-liquid-phase extraction was used to separate anthraquinones from Cassiae Semen under the optimal conditions, and the recoveries were >75%. The experimental results showed that the established gas-assisted three-liquid-phase extraction method is a general technique for separating active compounds from herb extract.

Asunto(s)

RESUMEN

Phthalate esters (PAEs) are a group of serious environmental pollutants that are carcinogenic or tumorigenic to humans. In this work, a green, rapid, and effective analytical method based on supercritical fluid chromatography (SFC) has been proposed for the simultaneous determination of the eight PAE plasticizers in sports beverage samples. They are dimethyl phthalate (DMP), diethyl phthalate (DEP), dipropyl phthalate (DPRP), dibutyl phthalate (DBP), dipentyl phthalate (DPP), benzyl butyl phthalate (BBP), di-2-ethylhexyl phthalate (DEHP), and di-n-octyl phthalate (DNOP). Liquid phase extraction (LPE) was employed to extract the PAE plasticizers before testing using SFC with ultraviolet (UV) detection. SFC parameters, including stationary phase screening, modifier composition and volume percentage, column temperature, flow rate, and backpressure, were optimized. Under the optimum conditions, all the eight PAE plasticizers could be determined simultaneously by SFC within 6 min at 225 nm. The optimized eluent was supercritical CO2 with 3% (v/v) methanol. The performance of the developed method was also evaluated. The eight PAE plasticizers exhibited satisfactory linearities with correlation coefficients (r) of 0.9991-0.9997 in the range of 0.05-25 mg/L. The limits of detection ranged from 7.5 to 15 µg/L (S/N=3, n=3). Recoveries of all the PAE plasticizers for the spiked samples ranged from 91.7%-100.2% with relative standard deviations of no more than 6.5% (n=3). This method is green, time-saving, simple, selective, robust, and convenient for the analysis of the eight PAE plasticizers in real sports beverage samples.

Asunto(s)

RESUMEN

Here, a solid/liquid phase extraction mode was used for the preconcentration of Pb(II) in water and food samples through a biomass reinforced graphene oxide (BGO) membrane. Taking advantage of the two modes, the synergistic effect of BGO membrane (solid extraction) and organic solvent (liquid extraction) enhances the extraction efficiency toward target ion. In detail, the effect of composition parameters in BGO membrane and experiment conditions such as pH, eluent types, elution time and sample volume were optimized, as well as shows no obvious interference toward different competing ions. Under the optimal experiment conditions, the limit of detection, precision as RSD% of this method were found to be 0.84 µg L-1 and 4.65%, respectively. Moreover, the large enrichment factor of BGO membrane demonstrates the applicability of the use of large sample volumes. Furthermore, the method was successfully verified by analyzing spiked Pb(II) in water and food samples.

Asunto(s)

RESUMEN

In this work, a method was developed for the simultaneous determination of residual metoserpate, buquinolate and diclofenac in pork, milk, and eggs. Samples were extracted with 0.1% formic acid in acetonitrile, defatted with n-hexane, and filtered prior to analysis using liquid chromatography-tandem mass spectrometry. The analytes were separated on a C18 column using 0.1% acetic acid and methanol as the mobile phase. The matrix-matched calibration curves showed good linearity over a concentration range of 5-50 ng/g with coefficients of determination (R2 ) ≥0.991. The intra- and inter-day accuracies (expressed as recovery percentage values) calculated using three spiking levels (5, 10, and 20 µg/kg) were 80-108.65 and 74.06-107.15%, respectively, and the precisions (expressed as relative standard deviation) were 2.86-13.67 and 0.05-11.74%, respectively, for the tested drugs determined in various matrices. The limits of quantification (1 and 2 µg/kg) were below the uniform residual level (0.01 mg/kg) set for compounds that have no specific maximum residue limit (MRL). The developed method was tested using market samples and none of the target analytes was detected in any of the samples. The validated method proved to be practicable for detection of the tested analytes in pork, milk, and eggs.

Asunto(s)

RESUMEN

Ambient mass spectrometry provides great convenience for fast screening, and has showed promising potential in analytical chemistry. However, its relatively low sensitivity seriously restricts its practical utility in trace compound analysis. In this review, we summarize the sampling and analyte enrichment strategies coupled with nine modes of representative ambient mass spectrometry (desorption electrospray ionization, paper vhspray ionization, wooden-tip spray ionization, probe electrospray ionization, coated blade spray ionization, direct analysis in real time, desorption corona beam ionization, dielectric barrier discharge ionization, and atmospheric-pressure solids analysis probe) that have dramatically increased the detection sensitivity. We believe that these advances will promote routine use of ambient mass spectrometry. Graphical abstract Scheme of sampling stretagies for ambient mass spectrometry.

RESUMEN

Liquid phase microextraction (LPME) has been widely used in extraction and preconcentration systems as an excellent alternative to conventional liquid phase extraction. In this work, a critical review is presented on liquid phase microextraction techniques used in the determination of cadmium in environmental samples. LPME techniques are classified into three main groups: single-drop liquid phase microextraction (SDME), hollow fiber liquid phase microextraction (HF-LPME), and dispersive liquid-liquid microextraction (DLLME). Methods involving these liquid phase microextraction techniques are described, addressing advantages and disadvantages, samples, figures of merit, and trends.

Asunto(s)

RESUMEN

A novel syringe needle-based sampling approach coupled with liquid-phase extraction (NBS-LPE) was developed and applied to the extraction of l-ascorbic acid (AsA) in apple. In NBS-LPE, only a small amount of apple flesh (ca. 10mg) was sampled directly using a syringe needle and placed in a glass insert for liquid extraction of AsA by 80 µL oxalic acid-acetic acid. The extract was then directly analyzed by liquid chromatography. This new procedure is simple, convenient, almost organic solvent free, and causes far less damage to the fruit. To demonstrate the applicability of NBS-LPE, AsA levels at different sampling points in a single apple were determined to reveal the spatial distribution of the analyte in a three-dimensional model. The results also showed that this method had good sensitivity (limit of detection of 0.0097 mg/100g; limit of quantification of 0.0323 mg/100g), acceptable reproducibility (relative standard deviation of 5.01% (n=6)), a wide linear range of between 0.05 and 50mg/100g, and good linearity (r(2)=0.9921). This interesting extraction technique and modeling approach can be used to measure and monitor a wide range of compounds in various parts of different soft-matrix fruits and vegetables, including single specimens.

Asunto(s)

RESUMEN

A multiclass, multiresidue determination method is reported for the detection of ten veterinary drugs, including scopolamine, metoclopramide, acriflavine, berberine, tripelennamine, diphenhydramine, acrinol, triamcinolone, loperamide, and roxithromycin in pork, milk, and eggs. The method involves a simple extraction using 0.1% formic acid in acetonitrile, followed by defatting with n-hexane, centrifugation, and filtration prior to liquid chromatography with tandem mass spectrometric analysis. As ion suppression and enhancement effects are reported, matrix-matched calibrations are used for quantification, with determination coefficients ≥0.9765. For the majority of the tested analytes, the intra- and interday accuracy (expressed as recovery %) range from 70.6 to 94.6% and from 70.1 to 93.3%, respectively, and the precision (expressed as relative standard deviation) ranges from 0.5 to 19.8% and from 2.8 to 18.4% in all matrices. The limits of quantification range between 0.5 and 10 ng/g. The validated tandem mass spectrometry method is successfully applied to market samples; the target analytes are not detected in any of the tested samples. In terms of accuracy, no extract cleanup is deemed necessary. The developed method is feasible for the simultaneous detection of the tested analytes in pork, milk, and eggs.

Asunto(s)