RESUMEN

Perovskite multiple quantum wells (MQWs) have shown great potential in the field of light-emitting diodes (LEDs). However, the random formation of QWs with varying well widths (n numbers) often leads to suboptimal interface defects and charge transport issues. Here, we reveal that the crystallization sequence of bromide-based perovskite MQWs is large-n QWs preceding small-n QWs. With this insight, we prevent the crystallization of subsequent small-n QWs by reducing the crystallization rate, ultimately resulting in the crystallization of only n = 5 QWs. This reduction in the crystallization rate is achieved through the chemical interaction of dual additives with perovskite constituents. Additionally, the chemical interaction effectively passivates the uncoordinated lead ions defects. Consequently, pure-phase perovskite QWs with a high photoluminescence quantum efficiency of 75% are achieved. The resulting green LEDs achieve a peak external quantum efficiency of 17.1% and a maximum luminance of 29,480 cd m-2, which is attractive for full-color display applications of perovskites.

RESUMEN

Perovskite-based flexible electroluminescent (EL) devices are emerging as promising candidates in the display field due to their exceptional optoelectronic properties and potential for cost-effective production. However, simultaneously achieving high EL performance, excellent flexibility and stretchability, robust mechanical strength, and diverse applications remains a significant challenge. In this review, we provide a comprehensive overview of the latest developments in perovskite-based flexible EL devices, covering both direct-current (DC) and alternating-current (AC) electroluminescent formats. Our discussion encompasses the materials, working principles, device architectures, failure mechanisms, optimization strategies, and practical applications. Through this review, we aim to deepen our understanding of the current challenges and future directions of perovskite-based flexible light-emitting technologies, hoping to facilitate their potential commercial applications.

RESUMEN

Monolithic integration of color-conversion materials onto blue-backlight micro-light-emitting-diodes (micro-LEDs) has emerged as a promising strategy for achieving full-color microdisplay devices. However, this approach still encounters challenges such as the blue-backlight leakage and the poor fabrication yield rate due to unsatisfied quantum dot (QD) material and fabrication process. Here, the monolithic integration of 0.39-inch micro-display screens displaying colorful pictures and videos are demonstrated, which are enabled by creating interfacial chemical bonds for wafer-scale adhesion of sub-5 µm QD-pixels on blue-backlight micro-LED wafer. The ligand molecule with chlorosulfonyl and silane groups is selected as the synthesis ligand and surface treatment material, facilitating the preparation of high-efficiency QD photoresist and the formation of robust chemical bonds for pixel integration. This is a leading record in micro-display devices achieving the highest brightness larger than 400 thousand nits, the ultrahigh resolution of 3300 PPI, the wide color gamut of 130.4% NTSC, and the ultimate performance of service life exceeding 1000 h. These results extend the mature integrated circuit technique into the manufacture of micro-display device, which also lead the road of industrialization process of full-color micro-LEDs.

RESUMEN

Stability-issues of organic light-emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) require further advancements, especially in pure-blue range of CIEy < 0.20, existing a dilemma between color purity and device lifetime. Though improving bond-dissociation-energy (BDE) can effectively improve material intrinsic stability, strategies to simultaneously improve BDE and photophysical performances are still lacking. Herein, it is disclosed that synergistic intramolecular non-covalent interactions (Intra-NI) can achieve not only the highest C─N BDE among blue TADF materials, but enhanced molecular-rigidity, near-unity photoluminescent quantum yields and short delayed lifetime. Pure-blue TADF-OLEDs based on proof-of-concept TADF material realize high external-quantum-efficiency and record-high LT80@500 cd m-2 of 109 h with CIEy = 0.16. Furthermore, deep-blue TADF-sensitized devices exhibit high LT80@500 cd m-2 of 81 h with CIEy = 0.10. The findings provide new insight into the critical role of Intra-NI in OLED materials and open the way to tackling vexing stability issues for developing robust pure-blue organic emitters and other functional materials.

RESUMEN

A fast reverse intersystem crossing (RISC) remains an ongoing pursuit for multiresonance (MR) emitters but faces formidable challenges, particularly for indolocarbazole (ICz) derived ones. Here, heavy-atom effect is introduced first to construct ICz-MR emitter using a sulfur-containing substitute, simultaneously enhancing both spin-orbit and spin-vibronic coupling to afford a fast RISC with a rate of 1.2 × 105 s-1, nearly one order of magnitude higher than previous maximum values. The emitter also exhibits an extremely narrow deep-blue emission peaking at 456 nm with full-width at half-maxima of merely 12 nm and a photoluminescence quantum yield of 92%. Benefiting from its efficient triplet upconversion capability, this emitter achieves not only a high maximum external quantum efficiency (EQE) of 31.1% in organic light-emitting diodes but also greatly alleviates efficiency roll-off, affording record-high EQEs of 29.9% at 1000 cd m-2 and 18.7% at 5000 cd m-2 among devices with ICz-MR emitters.

RESUMEN

Organic light-emitting diodes (OLEDs) have been extensively investigated in full-color displays and energy-saving lighting owing to their unique advantages. However, deep-blue OLEDs based on nondoped emitting layers with a satisfactory external quantum efficiency (EQE) are still rare for applications. In this work, six hot exciton materials, PPIM-12F, PPIM-22F, PPIM-13F, PPIM-23F, PPIM-1CN, and PPIM-2CN, are designed and synthesized via an isomer engineering design strategy and their photophysical properties and OLED performance are systematically investigated. These emitters all possess wide band gaps (3.53-3.69 eV), hybrid local and charge transfer (HLCT) characteristics, and good thermal stabilities. The C2 series compounds, PPIM-22F, PPIM-23F, and PPIM-2CN, all show redder emission peaks than the N1 series counterparts of PPIM-12F, PPIM-13F, and PPIM-1CN. In addition, the LUMO energy levels decrease consecutively in the sequence of PPIM-22F < PPIM-23F < PPIM-2CN and are all lower than their respective N1 series position isomers of PPIM-12F, PPIM-13F, and PPIM-1CN. The CV measurements indicate that such a design strategy renders the fine-tuning of LUMO energy levels, and the incorporation of electron acceptors at the extended C2 position of the PI unit is a better choice to improve the electron injection ability. Theoretical simulations indicate that they may harvest the triplet exciton through an upper-level reverse intersystem crossing process, which decreases the gathering of triplet excitons and allows the OLEDs to be fabricated by nondoping technology. Among them, PPIM-22F with a difluorobenzene substituent at the C2 position manifests the best performance in OLEDs, which exhibits the maximum EQE of 7.87% and Commission Internationale de lEclairage (CIE) coordinates of (0.16, 0.10). This work demonstrates an effective strategy for considerable improvement in device performance by a subtle change in the molecular structure through isomer engineering.

RESUMEN

This study was conducted to evaluate the effects of Allium hookeri (AH) leaves cultivated with different light-emitting diode (LED) intensities (L: low, 100 µmol/m2/s; M: medium, 150 µmol/m2/s; H: high, 200 µmol/m2/s). Alliin concentration increased as light intensity increased in AH and showed the highest level at LED-H condition. The anti-obesity and immunomodulatory properties of AH were evaluated in a cyclophosphamide (CPA)-induced immunosuppressed obese animal model. C57BL/6 J mice were randomly divided into control (CON), high-fat diet (HFD) control (CON-H), negative control (NC), positive control (PC, ß-glucan, 50 mg/kg body weight (BW)), AH L, M, and H groups. The three kinds of AH extracts were orally administered to the mice at 300 mg/kg BW for 2 weeks. Except for CON and CON-H, all the other groups were intraperitoneally treated with CPA. Epididymal and abdominal fat weight decreased as LED intensity increased while spleen weight increased in the AH groups. Serum glucose decreased as LED intensity increased in the AH groups and H group showed the lowest level. Triglycerides, total, and LDL-cholesterol levels decreased while HDL-cholesterol level increased in the AH groups compared to the NC group. Moreover, AH effectively reduced serum ALT and AST levels and increased the total white blood cell count, particularly elevating lymphocyte and monocyte levels. Furthermore, NK cell activity was higher in the AH groups. These findings suggest that AH cultivated at optimal LED intensity could be used as a novel biomedicine and in pharmacotherapy to treat related diseases to improve public health without any toxicity.

RESUMEN

Different wavelengths emitted from light-emitting diodes (LEDs) are known as an influential factor in proliferation and differentiation of various cell types. Since human umbilical cord matrix-derived mesenchymal cells (hUCMs) are ideal tools for human regenerative medicine clinical trials and stem cell researches, in the present study we investigated the neurogenesis effects of single and intermittent green and red LED irradiation on hUCM cells. Exposure of hUCMs to single and intermittent green (530 nm, 1.59 J/cm2) and red (630 nm, 0.318 J/cm2) lights significantly increased the expression of specific genes including nestin, ß-tubulin III and Olig2. Additionally, immunocytochemical analysis confirmed the expression of specific neural-related proteins including nestin, ß-tubulin III, Olig2 and GFAP. Also, alternating exposure of hUCM cells to green and red lights increased the expression of some neural markers more than either light alone. Further research are required to develop the application of LED irradiation as a useful tool for therapeutic purposes including neural repair and regeneration.

Asunto(s)

RESUMEN

To evaluate the efficacy of yellow light-emitting diode (LED) irradiation at 590 nm, alone or in combination with anti-inflammatory active substances against ultraviolet (UV)-induced inflammation in keratinocytes. HaCaT keratinocytes were pretreated with LED yellow light (590 nm) alone or in combination with an antiinflammatory active substance such as glycerophosphoinositol choline (GC), extract of grains of paradise (Aframomum melegueta Schum, AM), or a bisabolol and ginger root extract mixture (Bb-GE) before UVB irradiation. Following each treatment, we measured the levels of inflammatory mediators secreted by keratinocytes. HaCaT keratinocytes treated with UVB (300 mJ cm-²) and then cultured for 24 h exhibited significantly upregulated expression of proinflammatory factors, including interleukin (IL)-1α, prostaglandin E2 (PGE2), and IL-8. After pretreatment with 590 nm LED, UVB-induced inflammatory responses were significantly inhibited. Co-pretreatment with 590 nm LED irradiation and GC further inhibited the expression of IL-1α and IL-8. IL-8 expression was inhibited by co-pretreatment with 590 nm LED irradiation and AM, whereas PGE2 expression was inhibited by co-pretreatment with 590 nm LED irradiation and Bb-GE. Co-treatment with 590 nm LED irradiation and various active substances modulated UVB-induced inflammation in keratinocytes, suggesting the potential application of this approach to prevent damage caused by voluntary sun exposure in daily life.

Asunto(s)

RESUMEN

OBJECTIVE: Vulvovaginal Candidiasis (VVC) is a prevalent genital infection in women of reproductive age and requires effective non-drug therapies. Therefore, this study aimed to investigate the effect of blue light emitting diode (LED) therapy as an alternative treatment for recurrent VVC due to its proven antimicrobial properties. The safety and non-invasiveness of LED therapy make it a promising option for sensitive tissue applications. MATERIALS AND METHODS: This randomized controlled trial recruited 60 women with culture-confirmed VVC. Participants were randomly allocated to two groups. Group A (control group) received standard antifungal treatment with Gynoconazol 0.8% vaginal cream for three consecutive nights (n = 30). Group B (study group) received the same antifungal treatment plus two 60-min sessions of blue LED therapy directed at the vagina and vulva, with the sessions separated by two days (n = 30). Candida count (via CHROMagar™ Candida) and vaginal pH (via AD110-AD111 m) were assessed at baseline and one week after initiating treatment. RESULTS: Post-treatment, group (B) demonstrated a significantly greater reduction in Candida count compared to group (A) (mean difference (MD) 8.267; 95% Confidence Interval (CI) 6.723-9.811; p = 0.0001). However, there was no statistically significant difference in vaginal pH between the groups (MD -0.03; 95% CI -0.244-0.178; p = 0.749). CONCLUSION: Blue LED therapy effectively reduces Candida count in women with recurrent VVC without adversely affecting the vaginal pH, highlighting its safety and efficacy as a treatment modality.

Asunto(s)

RESUMEN

BACKGROUND: Acne is a chronic inflammatory skin disease. Photodynamic therapy (PDT) is a highly effective and safe drug-device combination treatment, typically using red and blue light. However, direct comparisons of aminolevulinic acid (ALA)-based PDT using these two light sources are lacking. Therefore, we compared the efficacy and adverse effects of ALA-based 450 nm blue laser-mediated PDT (BL-PDT) and 630 ± 10 nm red light-emitting diode-mediated PDT (RL-PDT) in the treatment of moderate-to-severe acne vulgaris, including analyses of different lesion types. METHODS: Sixteen patients with moderate-to-severe acne vulgaris were recruited. All patients underwent BL-PDT on the left side of the face and RL-PDT on the right side. Treatments were administered thrice at 2-week intervals, and follow-up continued for 2 weeks after the final treatment. The average rates of improvement in inflammatory and non-inflammatory acne lesions, IGA (Investigator's Global Assessment) scales, and IGA success rates were calculated. In addition, adverse effects during and after each treatment were recorded. RESULTS: At the 2-week follow-up after the final treatment, the average rates of improvement in total acne, inflammatory, and non-inflammatory lesions were 48.0%, 63.0%, and 30.0% in the BL-PDT group and 42.2%, 58.1%, and 27.5% in the RL-PDT group, respectively. The IGA scores for the two groups decreased by 1.8 and 1.7 points, respectively, and the IGA success rate was 53.3% in both groups. There were no significant differences between the BL-PDT and RL-PDT groups in any measure of effectiveness. However, the BL-PDT group exhibited more severe adverse effects, especially pain and hyperpigmentation. CONCLUSIONS: BL-PDT and RL-PDT have similar efficacies in moderate-to-severe acne vulgaris and are particularly effective for inflammatory acne lesions. RL-PDT benefits from milder adverse effects than those of BL-PDT.

RESUMEN

Herein, a deep blue emitter (PI-TPB-CN) with a synergistic effect of hybridized local and charge transfer excited state (HLCT) and aggregation-induced emission (AIE) properties is successfully designed and synthesized to improve the performance of deep blue organic light-emitting diodes (OLEDs). It is constructed using a 1,2,4,5-tetraphenylbenzene (TPB) as an π-conjugated AIE core being asymmetrically functionalized with a phenanthro[9,10-d]imidazole (PI) as a weak donor (D) and a benzonitrile (CN) as an acceptor (A), thereby formulating D-π-A type fluorophore. Its HCLT and AIE properties verified by theoretical calculations, solvatochromic effects, and transient photoluminescence decay experiments, bring about a strong blue emission (452 nm) with a high photoluminescence quantum yield of 74% in the thin film. PI-TPB-CN is successfully employed as a blue emitter in OLEDs. Non-doped OLED with the structure of ITO/HATCN (6 nm)/NPB (30 nm)/TCTA (10 nm)/PI-TPB-CN (30 nm)/TPBi (40 nm)/LiF (1 nm)/Al (100 nm) demonstrates excellent electroluminescence (EL) performance with blue emission (451 nm) and maximum external quantum efficiency (EQEmax) of 7.38%. The device with a thinner layer of PI-TPB-CN (20 nm) and TPBi (30 nm) exhibits a deeper blue emission (444 nm) with CIE coordinates of (0.16, 0.09), a low turn-on voltage of 3.0 V, and EQEmax of 6.45%.

RESUMEN

Bright light impacts the human circadian system such that exposure to bright light at night can suppress melatonin secretion, and exposure to bright light in the morning prevents light-induced melatonin suppression at night. The preventive effect of morning light may attenuate the prior history of light sensitivity of intrinsically photosensitive retinal ganglion cells (ipRGCs) that regulate the circadian system. In this study, we evaluated electroretinogram (ERG) responses to red and blue flickering lights following dim and bright daylight conditions. Eleven healthy females underwent ERG measurements during exposure to 33 Hz flickering red or blue light under dim and bright daytime conditions. We averaged ERG waves for 50 flickering light pulses of the trigger signal data. We obtained the amplitude of the signal-averaged ERG by calculating the difference between the waves' peaks and bottoms. Although there was no significant dim and bright light difference in the amplitude of ERG waves, the ERG amplitude to flickering blue light under the bright light condition was significantly lower than to flickering blue light under the dim light condition. In this study, blue light stimulated mainly ipRGCs and S-cones. Since S-cones may contribute minimally to the light-adapted 33 Hz flicker ERG results, our findings suggest that bright light during the daytime attenuates the sensitivity of human ipRGCs.

RESUMEN

Organic-inorganic hybrid manganese(II) halides (OIMnHs) have garnered tremendous interest across a wide array of research fields owing to their outstanding optical properties, abundant structural diversity, low-cost solution processibility, and low toxicity, which make them extremely suitable for use as a new class of luminescent materials for various optoelectronic applications. Over the past years, a plethora of OIMnHs with different structural dimensionalities and multifunctionalities such as efficient photoluminescence (PL), radioluminescence, circularly polarized luminescence, and mechanoluminescence have been newly created by judicious screening of the organic cations and inorganic Mn(II) polyhedra. Specifically, through precise molecular and structural engineering, a series of OIMnHs with near-unity PL quantum yields, high anti-thermal quenching properties, and excellent stability in harsh conditions have been devised and explored for applications in light-emitting diodes (LEDs), X-ray scintillators, multimodal anti-counterfeiting, and fluorescent sensing. In this review, the latest advancements in the development of OIMnHs as efficient light-emitting materials are summarized, which covers from their fundamental physicochemical properties to advanced optoelectronic applications, with an emphasis on the structural and functionality design especially for LEDs and X-ray detection and imaging. Current challenges and future efforts to unlock the potentials of these promising materials are also envisioned.

RESUMEN

Organic-inorganic hybrid perovskite quantum dots (QDs) have garnered significant research interest owing to their unique structure and optoelectronic properties. However, their poor optical performance in ambient air remains a significant limitation, hindering their advancement and practical applications. Herein, three amino acids (valine, threonine and cysteine) were chosen as surface ligands to successfully prepare highly luminescent CH3NH3PbBr3 (MAPbBr3) QDs. The morphology and XRD results suggest that the inclusion of the amino acid ligands enhances the octahedral structure of the QD solutions. Moreover, the observed blue-shifted phenomenon in the photoluminescence (PL) aligns closely with the blue-shifted phenomenon observed in the ultraviolet-visible (UV-Vis) absorption spectra, attributed to the quantum confinement effect. The time-resolved spectra indicated that the introduction of the amino acid ligands successfully suppressed non-radiative recombination, consequently extending the fluorescence lifetime of the MAPbBr3 QDs. The photoluminescence quantum yields (PLQYs) of the amino acid-treated MAPbBr3 QDs are increased by 94.8%. The color rendering index (CRI) of the produced white light-emitting diode (WLED) is 85.3, with a correlated color temperature (CCT) of 5453 K. Our study presents a novel approach to enhancing the performance of perovskite QDs by employing specially designed surface ligands for surface passivation.

RESUMEN

AIM: Photopharmacology is a new technique for modulating biological phenomena through the photoconversion of substances in a specific target region at precise times. Caged compounds are thought to be compatible with photopharmacology as uncaged ligands are released and function in a light irradiation-dependent manner. Here, we investigated whether a microscale light-emitting diode (MicroLED) probe is applicable for the photoconversion of caged-glutamate (caged-Glu) in vivo. METHODS: A needle-shaped MicroLED probe was fabricated and inserted into the mouse hippocampal dentate gyrus (DG) with a cannula for drug injection and a recording electrode for measuring the local field potential (LFP). Artificial cerebrospinal fluid (ACSF) or caged-Glu was infused into the DG and illuminated with light from a MicroLED probe. RESULTS: In the caged-Glu-injected DG, the LFP changed in the 10-20 Hz frequency ranges after light illumination, whereas there was no change in the ACSF control condition. CONCLUSION: The MicroLED probe is applicable for photopharmacological experiments to modulate LFP with caged-Glu in vivo.

RESUMEN

Exploring efficient thermally-activated delayed fluorescence materials having maximum external quantum efficiencies (ηext,maxs) exceeding 30% for organic light-emitting diodes (OLEDs) still remains challenging because it generally requires efficient reverse intersystem crossing (RISC), high photoluminescence quantum yield (ΦPL), and large optical out-coupling efficiency (Φout) simultaneously. Herein, two green aggregation-induced delayed fluorescence (AIDF) luminogens, named XTCz-2 and XTCz-3, are designed and constructed by using xanthone (XT) as electron acceptor and phenylcarbazole-substituted carbazole as donors. XTCz-2 and XTCz-3 exhibit distinguished advantages of high thermal stability (439‒560 oC), excellent ΦPLs (84‒88%) and fast RISC rates (1.9 × 105‒4.2 × 105 s-1), and prefer horizontal dipole orientation and thus have high Φouts. Consequently, they can achieve the state-of-the-art electroluminescence (EL) performances with ηext,maxs of up to 35.0%. Moreover, XTCz-3 is selected as a sensitizer for sky-blue multi-resonance delayed fluorescence emitter in hyperfluorescence OLEDs, providing narrow EL spectra and excellent ηext,maxs of up to 33.8% with low efficiency roll-offs. The splendid comprehensive performances demonstrate the significant application potential of these AIDF luminogens as both light-emitting materials and sensitizers for OLEDs.

RESUMEN

The operating lifetime of quantum-dot light-emitting diodes (QLED) is a bottleneck for commercial display applications. To enhance the operational stability of QLEDs, we developed a robust solution-processed highly conductive hole-transport-layer (HTL) structure, which enables a thick HTL structure to mitigate the electric field. An alternating doping strategy, which involves multiple alternating stacks of N4,N4'-di(naphthalen-1-yl)-N4,N4'-bis(4-vinylphenyl)biphenyl-4,4'-diamine and phosphomolybdic acid layers, could provide significantly improved conductivity; more specifically, the 90 nm-thick alternatingly doped HTL exhibited higher conductivity than the 45 nm-thick undoped HTL. Therefore, when applied to a QLED, the increase in the thickness of the alternatingly doped HTL increased device reliability. As a result, the lifetime of the QLED with a thick, alternatingly doped HTL was 48-fold higher than that of the QLED with a thin undoped HTL. This alternating doping strategy provides a new paradigm for increasing the stability of solution-based optoelectronic devices in addition to QLEDs.

RESUMEN

The deep ultraviolet (DUV) micro-light emitting diode (µLED) has serious electron leakage and low hole injection efficiency. Meanwhile, with the decrease in the size of the LED chip, the plasma-assisted dry etching process will cause damage to the side wall of the mesa, which will form a carrier leakage channel and produce non-radiative recombination. All of these will reduce the photoelectric performance of µLED. To this end, this study introduces polarized bulk charges into the hole supply layer (p-HSL) and the electron supply layer (n-ESL) respectively (dual-polarized structure) of the DUV µLED at an emission wavelength of 279 nm to enhance the binding of carriers and increase the injection efficiency of carriers. This is because the polarization-induced bulk charge can shield the polarized sheet charge on the interface and reduce the polarization electric field. The reduced polarization electric field in p-HSL can increase the effective barrier height of the conduction band in the p-type region and reduce the effective barrier height of the valence band. The decrease in the polarized electric field of n-HSL can reduce the thermal velocity of electrons, thereby enhancing the electron injection efficiency, reducing the Shockley-Read-Hall (SRH) recombination, and increasing the effective barrier height of the valence band. The study results indicate that the electron concentration and hole concentration of a µLED with dual polarization were increased by 77.93% and 93.6%, respectively. The optical power and maximum external quantum efficiency of µLED reached 31.04 W/cm2 and 2.91% respectively, and the efficiency droop is only 2.06% at 120 A/cm2. These results provide a new approach to solving the problem of insufficient carrier injection and SRH recombination in high-performance DUV µLEDs.

RESUMEN

In this study, novel phosphorescent dipyrido[3,2-a;2'3'-c]phenazine (dppz)-platinum(II)-phenylacetylide complexes were developed to fabricate non-doped organic light-emitting diodes (OLED) by solution-processing. To facilitate the charge carrier injection into the emitting layer (EML), 3,6-di-tert-butylcarbazole-functinalized phenylacetylides were employed. As for the dppz ligand, 9,9-dihexylfluoren-2-yl and 4-hexylthiophen-2-yl side-arms were introduced to the 2,7-positions, which led to reddish orange and red photoluminescence (PL), respectively, in solution and film states (PL wavelength: ca. 600 and ca. 625 nm, respectively). The carbazole-appended phenylacetylide ligands hardly affected the emission color, although unsubstituted phenylacetylides gave rise to aggregate- or excimer-based near-infrared PL with a low quantum yield. Two types of non-doped OLEDs were fabricated: single-layer and multilayer devices. In both devices, the organic layers were fabricated by spin-coating, and the EML consisted of a neat film of the corresponding platinum(II) complex. Therein, electroluminescence spectra corresponding to those of PL were observed. The single-layer devices exhibited low device efficiencies due to a deteriorated charge carrier balance. The multilayer devices possessed hole- and electron-transporting layers on the anode and cathode sides of the EML, respectively. Owing to an improved charge carrier balance, the multilayer devices exhibited higher device performance, affording considerably improved values of luminance and external quantum efficiency.