RESUMEN

The drive to enhance the operational durability and reliability of stretchable and wearable electronic and electrochemical devices has led to the exploration of self-healing materials that can recover from both physical and functional failures. In the present study, we fabricated a self-healable solid polymer electrolyte, referred to as an ionogel, using reversible hydrogen bonding between the ureidopyrimidone units of a block copolymer (BCP) network swollen in an ionic liquid (IL). The BCP consisted of poly(styrene-b-(methyl acrylate-r-ureidopyrimidone methacrylate)) [poly(S-b-(MA-r-UPyMA)], with the IL-phobic polystyrene forming micellar cores that were interconnected via intercorona hydrogen bonding between the ureidopyrimidone units. By precisely regulating the molecular weight and the composition of the hydrogen-bondable motifs, the mechanical, electrical, and self-healing characteristics of the ionogel were systematically evaluated. The resulting ionogel samples exhibited suitable stretchability, ionic conductivity, and room-temperature self-healability due to reversible hydrogen bonding. To highlight the applicability of the self-healing ionogel as a high-capacitance gate insulator, an electrolyte-gated transistor (EGT) was fabricated using a poly(3-hexylthiophene-2,5-diyl) semiconductor, and the performance of the EGT was fully recovered from a complete cut without any external stimuli.

RESUMEN

Ionogel-based piezoionic sensors feel motions and strains like human skin relying on reversible ion migrations under external mechanical stimulus and are of great importance to artificial intelligence. However, conventional ion-conductive polymers behave with degraded electrical and mechanical properties after thousands of strain cycles, and the discarded materials and devices become electronic wastes as well. Here, we develop ultrastretchable ionogels with superior electrical properties via the mediation of metal-organic frameworks, whose properties are attributed to reversible molecule interactions inside the material system. Ionogels present excellent mechanical properties with breaking elongation as high as 850%, exceeding most previously reported similar materials, and the high conductivity enables further application in sensor devices. In addition, our ionogels display superior recyclability because of the reversible physical and chemical interactions inside material molecules, which are eco-friendly to the environment. As a result, the ionogel-based piezoionic sensors deliver high sensitivity, flexibility, cyclic stability, and signal reliability, which are of great significance to wearable applications in human-motion detections such as throat vibration, facial expression, joint mobility, and finger movement. Our study paves the way for ultrastretchable and eco-friendly ionogel design for flexible electrochemical devices.

RESUMEN

The development of wearable electronic devices for human health monitoring requires materials with high mechanical performance and sensitivity. In this study, we present a novel transparent tissue-like ionogel-based wearable sensor based on silver nanowire-reinforced ionogel nanocomposites, P(AAm-co-AA) ionogel-Ag NWs composite. The composite exhibits a high stretchability of 605% strain and a moderate fracture stress of about 377 kPa. The sensor also demonstrates a sensitive response to temperature changes and electrostatic adsorption. By encapsulating the nanocomposite in a polyurethane transparent film dressing, we address issues such as skin irritation and enable multidirectional stretching. Measuring resistive changes of the ionogel nanocomposite in response to corresponding strain changes enables its utility as a highly stretchable wearable sensor with excellent performance in sensitivity, stability, and repeatability. The fabricated pressure sensor array exhibits great proficiency in stress distribution, capacitance sensing, and discernment of fluctuations in both external electric fields and stress. Our findings suggest that this material holds promise for applications in wearable and flexible strain sensors, temperature sensors, pressure sensors, and actuators.

Asunto(s)

RESUMEN

Self-healing covalent adaptable networks (CANs) are not only of fundamental interest but also of practical importance for achieving carbon neutrality and sustainable development. However, there is a trade-off between the mobility and cross-linking structure of CANs, making it challenging to develop CANs with excellent mechanical properties and high self-healing efficiency. Here, we report the utilization of a highly dynamic four-arm cross-linking unit with an internally catalyzed oxime-urethane group to obtain CAN-based ionogel with both high self-healing efficiency (>92.1%) at room temperature and superior mechanical properties (tensile strength 4.55 MPa and toughness 13.49 MJ m-3). This work demonstrates the significant potential of utilizing the synergistic electronic, spatial, and topological effects as a design strategy for developing high-performance materials.

RESUMEN

Photonic ionogels with dual electrical and optical output have been intensively studied. However, tunable temperature-responsive photonic ionogel assembled by thermosensitive nanogels has not been studied yet. Herein, an innovative approach to fabricate photonic ionogels has been developed for smart wearable devices with tunable temperature sensitivity and structural color. Firstly, poly(isopropylacrylamide-r-phenylmaleanilic acid) P(NIPAm-r-NPMA) nanogels self-assemble into photonic crystals in 2-hydroxyethyl acrylate (HEA), water, and the ionic liquid of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate. And then robust photonic ionogels are developed through a polymerization of 2-hydroxyethyl acrylate crosslinked by poly(ethylene glycol) diacrylate (PEGDA). The incorporation of the ionic liquid, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate, enhances the mechanical strength of photonic ionogels and tunes the temperature-sensitivity of the ionogels, making them adaptable to various environmental conditions. The findings demonstrate that these ionogels can serve dual functions in smart wearable devices, combining electrical and optical signal outputs due to the conductivity of the ionic liquid and structural color from the nanogel assembly. The resultant photonic ionogels exhibit exceptional substrate adhesion, mechanical stability, and fast resilience. More significantly, the nanogels within these ionogels serve as the building blocks of photonic crystals (PCs) endow with angle-independent coloration and enhance stretchability beyond 200 %, while the stretchability of the ionogles without the nanogels is only about 100 %. Our photonic ionogels with tunable temperature-sensitivity and dual outputs will open an avenue to the development of the innovative smart wearable devices.

RESUMEN

Ionogels are promising for soft iontronics, with their network structure playing a pivotal role in determining their performance and potential applications. However, simultaneously achieving mechanical toughness, low hysteresis, self-healing, and fluorescence using existing network structures is challenging. Drawing inspiration from jellyfish, we propose a novel hierarchical crosslinking network structure design for in situ formation of hyperbranched cluster aggregates (HCA) to fabricate polyurea ionogels to overcome these challenges. Leveraging the disparate reactivity of isocyanate groups, we induce the in situ formation of HCA through competing reactions, enhancing toughness and imparting the clustering-triggered emission of ionogel. This synergy between supramolecular interactions in the network and plasticizing effect in ionic liquid leads to reduced hysteresis of the ionogel. Furthermore, the incorporation of NCO-terminated prepolymer with dynamic oxime-urethane bonds (NPU) enables self-healing and enhances stretchability. Our investigations highlight the significant influence of HCA on ionogel performance, showcasing mechanical robustness including high strength (3.5 MPa), exceptional toughness (5.5 MJ m-3), resistance to puncture, and low hysteresis, self-healing, as well as fluorescence, surpassing conventional dynamic crosslinking approaches. This network design strategy is versatile and can meet the various demands of flexible electronics applications.

RESUMEN

Ionic liquids (ILs) play a crucial role in the design of novel materials. The ionic nature of ILs provides numerous advantages in drug delivery, acting as a green solvent or active ingredient to enhance the solubility, permeability, and binding efficiency of drugs. They could also function as a structuring agent in the development of nano/micro particles for drug delivery, including micelles, vesicles, gels, emulsion, and more. This review summarize the ILs and IL-based gel structures with their advanced drug delivery applications. The first part of review focuses on the role of ILs in drug formulation and the applications of ILs in drug delivery. The second part of review offers a comprehensive overview of recent drug delivery applications of IL-based gel. It aims to offer new perspectives and attract more attention to open up new avenues in the biomedical applications of ILs and IL-based gels.

Asunto(s)

RESUMEN

Ionic liquids (ILs) are prized for their selective dissolution of carbon dioxide (CO2), leading to their widespread use in ionogel membranes for gas separation. Despite their advantages, creating sustainable ionogel membranes with high IL contents poses challenges due to limited mechanical strength, leakage risks, and poor recyclability. Herein, we leverage copolymerized and supramolecularly bound ILs to develop ionogel membranes with high mechanical strength, zero leakage, and excellent self-healing and recycling capabilities. These membranes exhibit superior ideal selectivity for gas separation compared to other reported ionogel membranes, achieving a CO2/nitrogen selectivity of 61.7 and a CO2/methane selectivity of 24.6, coupled with an acceptable CO2 permeability of 186.4 Barrer. Additionally, these gas separation ionogel membranes can be upcycled into ionic skins for sensing applications, further enhancing their utility. This research outlines a strategic approach to molecularly engineer ionogel membranes, offering a promising pathway for developing sustainable, high-performance materials for advanced gas separation technologies.

RESUMEN

Realizing rechargeable cells with practical energy and power density requires electrodes with high active material loading, a remaining challenge for solid-state batteries. Here, we present a new strategy based on ionogel-derived solid-state electrolytes (SSEs) to form composite electrodes that enable high active material loading (>10 mg/cm2, ~9 mA/cm2 at 1C) in a scalable approach for fabricating Li-ion cells. By tuning the precursor and active materials composition incorporated into the composite lithium titanate electrodes, we achieve near-theoretical capacity utilization at C/5 rates and cells capable of stable cycling at 5.85 mA/cm2 (11.70 A/g) with over 99% average Coulombic efficiency at room temperature. Finally, we demonstrate a complete polymeric solid-state cell with a composite anode and a composite lithium iron phosphate cathode with ionogel SSEs, which is capable of stable cycling at a 1C rate.

RESUMEN

Bionic artificial skin which imitates the features and functions of human skin, has broad applications in wearable human-machine interfaces. However, equipping artificial materials with skin-like mechanical properties, self-healing ability, and high sensitivity remains challenging. Here, inspired by the structure of human skin, an artificial skin based on ionogel composites with tailored mechanical properties and robust interface is prepared. Combining finite element analysis and direct ink writing (DIW) 3D printing technology, an ionogel composite with a rigid skeleton and an ionogel matrix is precisely designed and fabricated, realizing the mechanical anisotropy and nonlinear mechanical response that accurately mimic human skin. Robust interface is created through co-curing of the skeleton and matrix resins, significantly enhancing the stability of the composite. The realization of self-healing ability and resistance to crack growth further ensure the remarkable durability of the artificial skin for sensing application. In summary, the bionic artificial skin mimics the characteristics of human skin, including mechanical anisotropy, nonlinear mechanical response, self-healing capability, durability and high sensitivity when applied as flexible sensors. These strategies provide strong support for the fabrication of tissue-like materials with adaptive mechanical behaviors.

Asunto(s)

RESUMEN

Creating bionic intelligent robotic systems that emulate human-like skin perception presents a considerable scientific challenge. This study introduces a multifunctional bionic electronic skin (e-skin) made from polyacrylic acid ionogel (PAIG), designed to detect human motion signals and transmit them to robotic systems for recognition and classification. The PAIG is synthesized using a suspension of liquid metal and graphene oxide nanosheets as initiators and cross-linkers. The resulting PAIGs demonstrate excellent mechanical properties, resistance to freezing and drying, and self-healing capabilities. Functionally, the PAIG effectively captures human motion signals through electromechanical sensing. Furthermore, a bionic intelligent sorting robot system is developed by integrating the PAIG-based e-skin with a robotic manipulator. This system leverages its ability to detect frictional electrical signals, enabling precise identification and sorting of materials. The innovations presented in this study hold significant potential for applications in artificial intelligence, rehabilitation training, and intelligent classification systems.

RESUMEN

Ionogel-based sensors have gained widespread attention in recent years due to their excellent flexibility, biocompatibility, and multifunctionality. However, the adaptation of ionogel-based sensors in extreme environments (such as humid, acidic, alkaline, and salt environments) has rarely been studied. Here, thermoplastic polyurethane/carbon nanotubes-ionic liquids (TPU/CNTs-ILs) ionogels with a complementary sandpaper morphology on the surface were prepared by a solution-casting method with a simple sandpaper as the template, and the hydrophobic flexible TPU/CNTs-ILs ionogel-based sensor was obtained by modification using nanoparticles modified with cetyltrimethoxysilane. The hydrophobicity improves the environmental resistance of the sensor. The ionogel-based sensor exhibits multimode sensing performance and can accurately detect response signals from strain (0-150%), pressure (0.1-1 kPa), and temperature (30-100 °C) stimuli. Most importantly, the hydrophobic TPU/CNTs-ILs ionogel-based sensors can be used not only as wearable strain sensors to monitor human motion signals but also for information transfer, writing recognition systems, and underwater activity monitoring. Thus, the hydrophobic TPU/CNTs-ILs ionogel-based sensor offers a new strategy for wearable electronics, especially for applications in extreme environments.

RESUMEN

Ionogel has recently emerged as a promising ionotronic material due to its good ionic conductivity and flexibility. However, low stretchability and significant hysteresis under long-term loading limit their mechanical stability and repeatability. Developing ultralow hysteresis ionogels with high stretchability is of great significance. Here, a simple and effective strategy is developed to fabricate highly stretchable and ultralow-hysteresis noncovalent cross-linked ionogels based on phase separation by 3D printing of 2-hydroxypropyl acrylate (HPA) in 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4). Ingeniously, the sea-island structure of the physically cross-linked network constructed by the smaller nanodomains and larger nanodomain clusters significantly minimizes the energy dissipation, endowing these ionogels with remarkable stretchability (>1000%), ultra-low hysteresis (as low as 0.2%), excellent temperature tolerance (-33-317 °C), extraordinary ionic conductivity (up to 1.7 mS cm-1), and outstanding durability (5000 cycles). Moreover, due to the formation of nanophase separation and cross-linking structure, the as-prepared ionogels exhibit unique thermochromic and multiple photoluminescent properties, which can synergistically be applied for anti-counterfeiting and encrypting. Importantly, flexible thermo-mechano-multimodal visual ionotronic sensors for strain and temperature sensing with highly stable and reproducible electrical response over 20 000 cycles are fabricated, showing synergistically optical and electrical output performances.

RESUMEN

Over the last years, solid-state electrolytes made of an ionic liquid (IL) confined in a solid (inorganic or polymer) matrix, also known as ionogels, have been proposed to solve the leakage problems occurring at high temperatures in classical electrical double-layer capacitors (EDLCs) with an organic electrolyte, and thereof improve the safety. However, making ionogel-based EDLCs perform with reasonable power at low temperature is still a major challenge due to the high melting point of the confined IL. To overcome these limitations, the present contribution discloses ionogel films prepared in a totally oxygen/moisture-free atmosphere by encapsulating 70 wt % of an equimolar mixture of 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide and 1-ethyl-3-methylimidazolium tetrafluoroborate - [EMIm][BF4]0.5[FSI]0.5 - into a poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) network. The further called "binary ionogel" films demonstrated a high flexibility and a good ionic conductivity of 5.8 mS cm-1 at 20 °C. Contrary to the ionogels prepared from either [EMIm][FSI] or [EMIm][BF4], displaying melting at Tm=-16 °C and -7 °C, respectively, the crystallization of confined [EMIm][BF4]0.5[FSI]0.5 is quenched in the binary ionogel, which shows only a glass transition at -101 °C. This quenching enables an increased ionicity and ionic diffusion at the interface with the PVdF host network, leading the binary ionogel membrane to display higher ionic conductivity below -20 °C than the parent binary [EMIm][BF4]0.5[FSI]0.5 liquid. Laminate EDLCs were built with a 100 µm thick binary ionogel separator and electrodes made from a hierarchical micro-/mesoporous MgO-templated carbon containing a reasonable proportion of mesopores to enhance the mass transport of ions, especially at low temperature where the ionic diffusion noticeably decreases. The EDLCs operated up to 3.0 V with ideal EDL characteristics from -40 °C to room temperature. Their output specific energy under a discharge power of 1 kW kg-1 is ca. 4 times larger than with a cell implementing the same carbon electrodes together with the binary [EMIm][BF4]0.5[FSI]0.5 liquid. Hence, this binary ionogel electrolyte concept paves the road for developing safe and flexible solid-state energy storage devices operating at subambient temperatures in extreme environments.

RESUMEN

Electrochromic devices built with ionogel electrolytes are seen as a pivotal step toward the future of quasi-solid electrochromic devices, due to their striking properties like exceptional safety and high ionic conductivity. Yet, the poor mechanical strength of electrolyte of these devices remains a constraint that hampers their advancement. As a resolution, this research explores the use of a robust, transparent ionogel electrolyte, which is designed using an in situ microphase separation strategy. The ionogels are highly transparent and robust and exhibit excellent physicochemical stability, including a wide electrochemical window and high temperature tolerance. Benefitting from these properties, a high-performance electrochromic device is fabricated through in situ polymerization with the ionogels, PPRODOT as the electrochromic layer, and PEDOT: PSS as the ion storage layer, achieving high transmittance contrast (43.1%), fast response (1/1.7 s), high coloring efficiency (1296.4 cm2 C-1), and excellent cycling endurance (>99.9% retention after 2000 cycles). In addition, using ITO-poly(ethylene terephthalate) as flexible substrates, a deformable electrochromic device displaying high stability is realized, highlighting the potential use in functional wearables.

Asunto(s)

RESUMEN

Moisture usually deteriorates polymers' mechanical performance owing to its plasticizing effect, causing side effects in their practical load-bearing applications. Herein, a simple binary ionogel consisting of an amphiphilic polymer network and a hydrophobic ionic liquid (IL) is developed with remarkable stiffening effect after moisture absorption, demonstrating a complete contrast to water-induced softening effect of most polymer materials. Such a moisture-induced stiffening behavior is induced by phase separation after hydration of this binary ionogel. Specifically, it is revealed that hydrogen (H)-bonding structures play a dominant role in the humidity-responsive behavior of the ionogel, where water will preferentially interact with polymer chains through H-bonding and break the polymer-IL H-bonds, thus leading to phase separation structures with modulus boosting. This work may provide a facile and effective molecular engineering route to construct mechanically adaptive polymers with water-induced dramatic stiffening for diverse applications.

RESUMEN

Ionogels have grabbed significant interest in various applications, from sensors and actuators to wearable electronics and energy storage devices. However, current ionogels suffer from low strength and poor ionic conductivity, limiting their performance in practical applications. Here, inspired by the mechanical reinforcement of natural biomacromolecules through noncovalent aggregates, a strategy is proposed to construct nanofibril-based ionogels through complex coacervation-induced assembly. Cellulose nanofibrils (CNFs) can bundle together with poly(ionic liquid) (PIL) to form a superstrong nanofibrous network, in which the ionic liquid (IL) can be retained to form ionogels with high liquid inclusion and ionic conductivity. The strength of the CNF-PIL-IL ionogels can be tuned by the IL content over a wide range of up to 78 MPa. The optical transparency, high strength, and hygroscopicity enabled them to be promising candidates in moist-electricity generation and applications such as energy harvesting windows and wearable power generators. In addition, the ionogels are degradable and the ionogel-based generators can be recycled through dehydration. Our strategy suggests perspectives for the fabrication of high-strength and multifunctional ionogels for sustainable applications.

RESUMEN

In recent years, the quest to advance fuel cell technologies has intensified, driven by the imperative to reduce reliance on hydrocarbon-derived fuels and mitigate pollutant emissions. Proton exchange membranes are a critical material of fuel cell technologies. The potential of ionic liquid-based polymer inclusion membranes or ionogels for proton exchange membrane fuel cells (PEMFCs) has recently appeared. Thermal stability, SEM-EDX characterization, NMR and IR characterization, thermogravimetric analysis, ion exchange capacity, and water uptake are key properties of these membranes which need to be investigated. In this work, ionogel based on quaternary ammonium salts, such as [N8,8,8,1+][Cl-], [N8,8,8,1+][Br-], and [N8-10,8-10,8-10,1+][Cl-] in various compositions with poly(vinyl chloride) are extensively studied and characterized based on those key properties. The best properties were obtained when a quaternary ammonium cation was combined with a bromide anion. Finally, ionogels are tested in microbial fuel cells. Microbial fuel cells based on the ionogel reach a maximum of 147 mW/m2, which represents 55% of the reference membrane (Nafion 212). These results indicate that we still have the possibility of improvement through the appropriate selection of the cation and anion of the ionic liquid. Overall, the promise of ionogel membranes as a viable alternative in fuel cell applications has been demonstrated.

RESUMEN

Stretchable ionogels, as soft ion-conducting materials, have generated significant interest. However, the integration of multiple functions into a single ionogel, including temperature tolerance, self-adhesiveness, and stability in diverse environments, remains a challenge. In this study, a new class of fluorine-containing ionogels was synthesized through photo-initiated copolymerization of fluorinated hexafluorobutyl methacrylate and butyl acrylate in a fluorinated ionic liquid 1-butyl-3-methyl imidazolium bis (trifluoromethylsulfonyl) imide. The resulting ionogels demonstrate good stretchability with a fracture strain of ~1300%. Owing to the advantages of the fluorinated network and the ionic liquid, the ionogels show excellent stability in air and vacuum, as well as in various solvent media such as water, sodium chloride solution, and hexane. Additionally, the ionogels display impressive wide temperature tolerance, functioning effectively within a wide temperature range from -60 to 350 °C. Moreover, due to their adhesive properties, the ionogels can be easily attached to various substrates, including plastic, rubber, steel, and glass. Sensors made of these ionogels reliably respond to repetitive tensile-release motion and finger bending in both air and underwater. These findings suggest that the developed ionogels hold great promise for application in wearable devices.

RESUMEN

Flexible and stretchable transparent heaters (THs) have been widely used in various applications, including deicing and defogging of flexible screens as well as thermotherapy pads. Ionic THs based on ionogels have emerged as a promising alternative to conventional electronic THs due to their unique advantages in terms of transparency-conductance conflict, uniform heating, and interfacial adhesion. However, the commonly used hydrophilic ionogels inevitably introduce a moisture-sensitive issue. In this work, we present a stretchable and transparent hydrophobic ionogel-based heater that utilizes ionic current-induced Joule heating under high-frequency alternating current. This ionogel-based TH exhibits exceptional multifunctional properties with low hysteresis, a fracture strain of 840%, transmittance of 93%, conductivity of 0.062 S m-1, temperature resistance up to 165 °C, voltage resistance up to 120 V, heating rate of 0.1 °C s-1, steady-state temperature at 115 °C, and uniform heating even when bent or stretched (up to 200%). Furthermore, it maintains its heating performance when it is directly exposed to water. This hydrophobic ionogel-based TH expands the range of materials available for ionic THs and paves the way for their practical applications.