RESUMEN

Food waste, accounting for about one-third of the total global food resources wasted each year, is a substantial challenge to global sustainability, contributing to adverse environmental impacts. The utilization of food waste as a valuable source for bioactive extraction can be facilitated through the application of DES (Deep Eutectic Solvents). Acknowledging the significant need to tackle this issue, the United Nations integrated food waste management into its Sustainable Development Goals, hence, the present review explores the role of DES in bioactive compounds extraction from food waste. Various extraction processes using the DES system are thoroughly studied and the application of bioactive components as antioxidants, antimicrobials, flavourings, nutraceuticals, functional ingredients, additives, and preservatives is investigated. Most importantly, regulatory considerations and safety aspects of DES in food applications are discussed in-depth along with consumer perception and acceptance of DES in the food sector. The key hypothesis of the review is to evaluate emerging DES systems for their efficiency in bioactive extraction technologies and various food applications. Overall, this review provides a comprehensive understanding of utilizing DES for synthesizing valuable food waste-derived bioactive components, offering a sustainable approach to waste management and the development of high-value products.

Asunto(s)

RESUMEN

Innately designed to induce physiological changes, pharmaceuticals are foreknowingly hazardous to the ecosystem. Advanced oxidation processes (AOPs) are recognized as a set of contemporary and highly efficient methods being used as a contrivance for the removal of pharmaceutical residues. Since reactive oxygen species (ROS) are formed in these processes to interact and contribute directly toward the oxidation of target contaminant(s), a profound insight regarding the mechanisms of ROS leading to the degradation of pharmaceuticals is fundamentally significant. The conceptualization of some specific reaction mechanisms allows the design of an effective and safe degradation process that can empirically reduce the environmental impact of the micropollutants. This review mainly deliberates the mechanistic reaction pathways for ROS-mediated degradation of pharmaceuticals often leading to complete mineralization, with a focus on acetaminophen as a drug waste model.

Asunto(s)

RESUMEN

In this study, a simple, sensitive, and rapid method called green hydrophobic deep eutectic solvent-based liquid-liquid microextraction was developed to extract Brilliant Blue FCF dye from beverages. This method utilizes hydrophobic DES obtained by forming tetrabutylammonium bromide and 1-octanol in a 1:5 ratio as green extraction solvent. The transition of Brilliant Blue FCF to the DES phase occurred on its own, without the need for any reagents such as added salt or tetrahydrofuran. Several crucial factors were tried to get the best extraction efficiency, including species, DES volume and molar ratio, solution pH, ultrasonication, and centrifugation time. Under optimum conditions, extraction recoveries were achieved in the range of 95.1-101.3 % with the method developed for Brilliant Blue FCF. The detection and determination limits were observed to be 4.1 µg l-1 and 12.1 µg l-1, respectively. In addition, the relative standard deviation values for the method's accuracy were found to be 2.23 % and 3.48 % within and between days, respectively. It has been established that the developed method is highly environmentally friendly thanks to the application of the Analytical GREENness (AGREE) and Green Analytical Procedure Index (GAPI) tools. This study shows that DES applications can be carried out without the use of emulsifiers and dispersants by prioritizing the use of hydrophobic DES compounds as environmentally friendly and green extraction solvents in food samples.

RESUMEN

An innovative binary biol-based deep eutectic solvent (DES), specifically ethylamine hydrochloride-ethylene glycol (EaCl-EG), was developed for efficient pretreatment of eucalyptus biomass. This DES exhibited superior performance in achieving high delignification (85.0%) and xylan removal (80.0%), while preserving a significant amount of cellulose (94.5%) compared to choline chloride-based DES. Notably, the pretreated eucalyptus residues showed a remarkable glucose yield of over 92.5%, representing a substantial enhancement of up to 15 times compared to untreated eucalyptus. Furthermore, the pretreated liquor yielded high-purity lignin with a yield of 97.8%, characterized by well-preserved ß-O-4 structure and nanoscale dimensions. These lignin nanoparticles (LNPs) were subsequently self-assembled into lignin nanobottles (LNBs), adding further value to the pretreatment process. The proposed novel binary EaCl-EG DES presented great potential as an efficient pretreatment solvent for future biomass fractionation processes.

Asunto(s)

RESUMEN

Biomass pretreatment and conversion are crucial for sustainable development, but lack information on equipment that ensures effective mass transfer and easy biomass separation post-process. This work introduces a novel basket reactor with a stationary bed (StatBioChem) for biomass processing using deep eutectic solvents (DESs). We compared the delignification efficiencies of soft and hard biomass samples processed in the StatBioChem reactor, a stirred tank reactor (STR), and a commercial SpinChem® reactor. The StatBioChem design allowed DES to flow evenly through biomass in the basket, achieving the highest delignification degree, particularly for hard biomass. This effect was not observed in the SpinChem® basket reactor. High delignification led to increased glucose yields in subsequent enzymatic hydrolysis. The StatBioChem effectively combines the simplicity and efficiency of an STR with the ease of solvent recovery typical of basket reactors.

RESUMEN

The present study aims at investigating the application of ultrasound assisted choline chloride (ChCl) - formic acid (FA) deep eutectic solvent (DES) pretreatment of Barley straw. In addition, the efficiency of a wet grinding followed by high intensity ultrasound (HIUS) treatment for production of cellulose nanofibers (CNF) has been evaluated. The DES (using ChCl: FA at 1:9 M ratio) treatment at 45 kHz ultrasound frequency and 3 h of treatment duration resulted in 84.68 ± 1.02 % and 82.96 ± 0.79 % of lignin and hemicellulose solubilisation, respectively. The purification of DES treated solid residue resulted in cellulose with more than 90 % purity. Further, 10 min of wet grinding followed by 40 min of HIUS treatment resulted in more than 80 % nano-fibrillation efficiency. The produced CNF had diameters less than 100 nm in number size distribution and type I cellulose structure. This study confirmed that the developed process offers a sustainable method for producing nanocellulose from agricultural waste.

Asunto(s)

RESUMEN

Organophosphorus pesticides (OPPs) are a group of pesticides that are most widely used in the agricultural sector, and farmers are exposed to these chemicals more than other members of society. In this work, an environmentally friendly, simple, and safe ultrasound-assisted dispersive liquid-liquid microextraction (USA-DLLME) method using alcohol-based hydrophobic deep eutectic solvents (HDESs) followed by gas chromatography-mass spectroscopy (GC-MS) was developed for the extraction and determination of OPPs in the blood of farmers studied in Ravansar cohort. DESs synthesized from thymol as hydrogen bond donor (HBD) and aliphatic alcohols as hydrogen bond acceptor (HBA) have been used as extractants. Under optimal experimental conditions, the reproducibility of the method based on 7 replicate measurements of 10 µg L-1 of OPPs in blood samples was in the range of 1.4-3.8%. The method showed a linearity in the range of 0.01-150 µg L-1. The limits of detection and limits of quantification were between 0.003 and 0.02 µg L-1 and 0.01-0.05 µg L-1, respectively. The matrix effect and accuracy of the method were confirmed by spiking different amounts of OPPs in real blood samples and obtaining relative recoveries in the range of 91-112%. The results showed that the concentration of OPPs in the case group was significantly higher than in the control group, which is because the case group was exposed to OPPs during the spraying of agricultural products.

RESUMEN

This article explores the novel use of natural deep eutectic solvents (NaDES) in real food by incorporating them into mayonnaise, either alone or with pigmented rice bran (RB). Results showed that NaDES-fortified mayonnaises could prevent lipid oxidation. Notably, mayonnaises with NaDES2 (betaine:sucrose:water) significantly reduced the production of lipid hydroperoxides, which was maintained to an average of 2.6 mmol LOOH/kg oil, which is 2.9 times lower than the control (7.5 mmol LOOH/kg oil), or 7.4 times lower than mayonnaise with citric acid (19.1 mmol LOOH/kg oil). NaDES2-fortified mayonnaises maintained high tocopherols levels (0.97 g/Kg oil) and reduced volatile compounds from secondary lipid oxidation. This effect may result from NaDES altering the aqueous phase properties of mayonnaise, notably by reducing water activity by ∼0.1. Finally, pre-enrichment of the NaDES phase with bioactive molecules (e.g. from pigmented RB) represents an innovative perspective to promote the health benefits of formulated foods.

RESUMEN

Flexible electronic sensing and energy storage technology impose heightened demands on the mechanical and stable properties of gel electrolyte materials. Lignocellulosic nanofiber (LCNF) present a promising avenue for improving the properties of electrolyte networks and mechanical strength. In this study, LCNF derived from hemp fibers was prepared using lactic acid/choline chloride deep eutectic solvent (DES) through a combination of cooking and colloid mill mechanical treatment to achieve nanocellulose with a high aspect ratio and uniform dimensions. The outcomes demonstrated that LCNF, a width of below 20 nm and a length of over 5 µm, can be effectively produced through the DES cooking pretreatment in conjunction with colloid mill mechanical treatment. Meanwhile, DES lignin possessed a purity of ∼90 % and was obtained as a by-product. Subsequently, the as-prepared LCNF was integrated as a nanofiller into gel electrolyte. Ag-L NPs/LCNF/DES/PAA exhibited dense porous structures and showcased exceptional properties, including a high conductivity exceeding 10 mS/cm and remarkable adhesion strength surpassing 100 KPa. The presence of LCNF allowed Ag-L NPs/LCNF/DES/PAA to achieve strains above 1000 % and compression properties over 1000 KPa. The supercapacitor based on this assembly had a high specific capacitance of 271 F g-1 at 0.5 A g-1), along with an impressive capacity retention rate reaching ∼100 % after 3000 cycles. This investigation offers valuable insights into the utilization of lignocellulosic multi-component approaches in the development of flexible electronic devices.

RESUMEN

A novel and selective (deep eutectic solvent) DES-based microextraction method was established for the first time, utilizing a synthesized new generation High-Density Type-V DES for monitoring the dye Erythrosine (E127) in various foodstuffs and drugs. Type-V DES was created from acetophenone and diphenylamine at 3:1 M ratio. The pH, DES amount, and vortex time were optimized using Box-Behnken Design (BBD) of Response Surface Methodology (RSM). The quadratic microextraction model with R2 = 0.9982 was obtained. The limit of detection, preconcentration factor and linear dynamic range were determined to be 12 µg/L, 50 and 41-4000 µg/L, respectively. Effects of matrix components were examined. The developed High-Density Type-V Deep Eutectic Solvent Microextraction (HD-V-DES-ME) method was applied to foodstuffs and drugs to monitor their E127 contents and subsequently validated by applying spiked tests to real samples, with recoveries ranging between 94 and 101 %. The indexes of environmental friendliness and practicality for the method were evaluated using the Analytical GREEnness metric approach tool (AGREE) and the Blue Applicability Grade Index tool (BAGI), respectively.

RESUMEN

Aflatoxins pose a major health concern and require strict monitoring in food products. Existing methods rely on hazardous organic solvents for extraction, prompting the development of a greener alternative. This study explores deep eutectic solvents (DESs) for aflatoxin extraction from pistachios, a valuable food product prone to aflatoxin contamination. The proposed method utilizes DES extraction followed by solid-phase extraction cleanup and ultrahigh-performance liquid chromatography coupled with fluorescence detector analysis. Recovery rates ranged from 85.5 to 99.1% for pistachios spiked with 1-8 ng/g aflatoxins, in compliance with EU regulations, with coefficients of variation less than 2.94%. The method demonstrates good sensitivity with limits of detection and quantification in the range of 0.02-0.22 ng/g and 0.05-0.72 ng/g, respectively. Greenness assessment using AGREEPrep and White Analytical Chemistry metrics confirms its environmental sustainability. This approach offers a promising, safer, and more eco-friendly alternative for aflatoxin extraction from complex food matrices like pistachios.

Asunto(s)

RESUMEN

This study evaluated the ability of triethyl benzyl ammonium chloride/lactic acid deep eutectic solvent extracted lignin (TEBAC/LA-DES-L) to adsorb methylene blue (MB) without additional functional group modification. The structure and morphology of TEBAC/LA-DES-L were characterized using SEM, BET, FT-IR, and TGA techniques. Various factors influencing MB adsorption, such as extraction temperature, solution pH, adsorbent dose, initial MB concentration, adsorption time, and reaction temperature, were investigated. The Redlich-Peterson isotherm displayed a good fit for the experimental data, with a maximum adsorption capacity of 85.16 mg/g. Kinetic analysis suggested that the adsorption process followed the pseudo-second-order model, with adsorption occurring in <100 min on DES-L-4 h. The mechanism of MB adsorption on DES-L-4 h was attributed to electrostatic attraction, hydrophobic interactions, and hydrogen bonding forces. Overall, DES-L-4 h demonstrated high adsorption capacity and rapid adsorption rate, making it a promising adsorbent for effectively removing cationic dyes from wastewater.

RESUMEN

There have been numerous studies on flame retardant modification of natural fiber/PLA composite materials due to the demand for applications. However, the existing flame retardant modification methods mostly involve adding flame retardants, which have a negative impact on the mechanical properties. Based on this, this study aims to introduce sulfonic groups into the cellulose of straw fibers via modification with a sulfamic acid-based deep eutectic solvent (SDES), thereby achieving flame retardance without affecting the inherent mechanical properties of the composite material. The performance enhancement of DS/PLA is manifested in the following specific aspects: the LOI reaches 36.53 %, the thermal stability is improved from 7.8 % of the residual carbon of PS/PLA to 38.4 %, and the tensile modulus is increased by 69.5 %. The preparation scheme for straw/PLA composite materials in this study is simple, economical, and efficient, and the flame retardant performance of the composite material is excellent, providing valuable references for flame retardant modification of natural fiber/plastic composite materials.

RESUMEN

BACKGROUND: The use of pesticides to protect crops has long been an important measure to provide healthy and safe agricultural products, but excess pesticides flow into fields and rivers, causing environmental pollution. Earlier methods utilizing organic solvent liquid-liquid microextraction for pesticide residue detection were not environmentally friendly. Therefore, it is significant to find a greener and more convenient detection method to determine pesticide residues. RESULTS: A new method was established to detect three triazole fungicides (TFs), including myclobutanil, epoxiconazole and tebuconazole, in environmental water samples. And the determination was conducted using a high-performance liquid chromatography with the ultraviolet detector (HPLC-UV). The switchable deep eutectic solvent (SDES) can be reversibly switched between hydrophilic and hydrophobic states through temperature modulation. Additionally, the method exhibited excellent linearity for all target analytes within the concentration range of 10-2000 µg L-1, with satisfactory R2 values (≥0.9975). The limits of detection (LODs) ranged from 2.3 to 2.6 µg L-1, and the limits of quantification (LOQs) ranged from 7.8 to 8.7 µg L-1. The accuracy of the method was assessed through intra-day and inter-day precision tests, yielding relative standard deviations (RSDs) in the ranges of 2.8%-6.7% and 2.2%-7.5%, respectively. Density functional theory (DFT) results indicated that hydrogen bonding is a significant factor affecting the binding of DES with triazoles. Three different green assessment tools were used to prove that the SDES-HLLME method had good greenness and broad applicability. SIGNIFICANCE: This is a homogeneous liquid-liquid microextraction (HLLME) method based on the upper critical solution temperature (UCST) type switchable deep eutectic solvent program, which can complete the extraction within a few minutes without dispersant. In terms of pesticide detection, the analytical method is simple and more conducive to environmental protection.

RESUMEN

In recent years, flexible sensors constructed mainly from hydrogels have received increasing attention. However, conventional hydrogels need to be prepared by high-temperature or radiation-induced polymerization reactions, which limits their practical applications due to their suboptimal electrical conductivity and weak mechanical properties. In this paper, using sodium lignosulfonate as the raw material, a dynamic catechol-quinone redox system formed by lignin­zinc ions was constructed to initiate rapid free radical polymerization of acrylamide (AM) monomer at room temperature. In addition, Deep eutectic solvent (DES) can form a strong hydrogen bonding network within the molecules and between the molecules of the hydrogel, resulting in a hydrogel with good tensile properties (hydrogel elongation at break of 727.19 %, breaking strength of 84.09 kPa), and provides the hydrogel with high electrical conductivity, anti-dehydration, anti-freezing, and anti-bacterial properties. Meanwhile, the addition of lignin also improved the adhesion and UV resistance of the hydrogel. This hydrogel assembled into a flexible sensor can sense various small and large amplitude movements such as nodding, smiling, frowning, etc., and has a wide range of applications in flexible sensors.

RESUMEN

To meet the needs of developing efficient extractive materials alongside the evolution of miniaturized sorbent-based sample preparation techniques, a mesoporous structure of g-C3N4 doped with sulfur as a heteroatom was achieved utilizing a bubble template approach while avoiding the severe conditions of other methods. In an effort to increase the number of adsorption sites, the resultant exfoliated structure was then modified with thymol-coumarin NADES as a natural sorbent modifier, followed by introduction into a nylon 6 polymer via an electrospinning process. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Brunauer-Emmett-Teller (BET) surface area analysis validated S-doped g-C3N4 and composite production. The prepared electrospun fiber nanocomposite, entailing satisfactory processability, was then successfully utilized as a sorbent in on-chip thin film micro-solid-phase extraction of non-steroidal anti-inflammatory drugs (NSAIDs) from saliva samples prior to liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. Utilizing a chip device, a thin film µ-SPE coupled with LC-MS/MS analysis yielded promising outcomes with reduced sample solution and organic solvents while extending lifetime of a thin film sorbent. The DES-modified S-doped g-C3N4 amount in electrospun was optimized, along with adsorption and desorption variables. Under optimal conditions, selected NSAIDs were found to have a linear range of 0.05-100.0 ng mL-1 with an R2 ≥ 0.997. The detection limits were ranged between 0.02 and 0.2 ng mL-1. The intra-day and inter-day precisions obtained were less than 6.0%. Relative recoveries were between 93.3 and 111.4%.

Asunto(s)

RESUMEN

The traditional lignocellulose pretreatment by deep eutectic solvent (DES) was usually conducted under higher acidic, alkaline and high temperature conditions, which leads to the severe degradation of xylan, decreasing the subsequent reducing sugar concentration by enzymatic hydrolysis and further ethanol fermentation. It is essential to develop an effective DES that selectively removes lignin while preventing excessive xylan degradation during lignocellulose pretreatment. An effective ethylene glycol-assisted ternary DES was designed to treat corn straw (CS) at 100 °C for 6 h. 65.51 % lignin removal was achieved, over 93.46 % cellulose and 50.22 % xylan were retained in pretreated CS with excellent enzymatic digestibility (glucan conversion of 77.05 % and xylan conversion of 71.72 %), total sugar conversion could reach 75.93 %, implying the unique capacity to selectively remove lignin while preserving carbohydrate components. Furthermore, the universality of the selective removal of lignin and effective retention of xylan by ternary DES has been successfully proven by other polyols. The enzymatic hydrolysate of ternary DES-pretreated CS fermented over our genetically engineered yeast strain SFA1OE gave a high ethanol yield of 0.488 g/g total reducing sugar, demonstrating the effectiveness of the polyol-assisted ternary DES pretreatment in achieving high-efficiency cellulosic ethanol production.

Asunto(s)

RESUMEN

In this study, deep eutectic solvent (DES) prepared from choline chloride, lactic acid, and one of the four polyols (ethylene glycol, glycerol, xylitol, and sorbitol) were compared and assessed for their effectiveness in extracting chitin from lobster shells. Our results revealed that as the number of hydroxyl groups in polyols increased, the hydrogen bond network within the DESs became denser. However, this led to a corresponding increase in viscosity, which impacted the efficiency of chitin extraction. Among all prepared DESs, choline chloride-lactic acid/glycerol (CCLaGly) exhibited superior extractive ability, resulting in the extraction of pure chitin from lobster shells. The purity, crystallinity, and molecular weight of the extracted chitin using CCLaGly DES were comparable to those of chemically-isolated chitin, with purity reaching 94.76 ± 0.33 %, crystallinity at 78.78 %, and a molecular weight of 655 kDa. Additionally, the physicochemical properties of the DES-extracted chitins were characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. This study conducted a comparative analysis of polyol effects on chitin extraction from lobster shells, thereby opening a promising avenue for the utilization of various crustacean shells in sustainable biomaterial production.

Asunto(s)

RESUMEN

A leading cause of global warming is the increase of carbon dioxide (CO2) emissions due to anthropogenic activities which prompts an urgent need for substantial reduction. Recently, CO2 absorption in deep eutectic solvents (DESs) has attracted scientific attention, because of their adaptability compared to traditional ionic liquids and aqueous amine solutions. This study employs the heating method to synthesize DESs using tetrapropylammonium bromide (TPAB) and formic acid (Fa) with molar ratios of TPAB-Fa (1:1) and TPAB-Fa (1:2). Absorption experiments by static method quantified CO2 solubility in the DESs under varied pressures and temperatures. TPAB-Fa (1:2) at 25.0 °C was the most efficient with the CO2 solubility of 0.218. Thermodynamic modeling was performed by employing the nonrandom two liquids activity coefficient model and the Peng-Robinson equation of state for the liquid and gas phases, respectively. The Henry's law constant was determined from experimental data. CO2 physical absorption was confirmed via nuclear magnetic resonance (NMR) and Fourier-transform infrared (FT-IR) analyses. TPAB-Fa (1:2), as the superior DES, exhibited regeneration efficiency of 99% after five absorption/desorption cycles.

RESUMEN

Achieving interfacial compatibility through sustainable methods is a key objective in natural fiber-plastic composites research, aimed at optimizing mechanical performance. This study introduced an innovative organic bamboo-plastic composite (BPC) interfacial layer, incorporating O-acylated chitin fibers densely coated with polydopamine (PDA) via a mild and facile self-assembly method. Chitin nanofibers were acylated with dodecenylsuccinic anhydride in a deep eutectic solvent in a one-pot process. The resulting BPCs exhibited significantly enhanced mechanical properties, with tensile strength, flexural strength, modulus, and impact strength increased by 73.64 %, 39.19 %, 15.42 %, and 63.57 %, respectively, compared to untreated BPCs. This improvement highlights the effectiveness of tailoring cross-linked networks across heterogeneous interfaces in providing strength, dissipating strain, and promoting interfacial compatibility. Furthermore, these modified BPCs demonstrated enhanced thermal stability, crystallization behavior, and moderate hydrophobicity. This surface treatment strategy offers a distinctive approach to producing high-performance, eco-friendly BPCs, also facilitating the processing and utilization of marine biological resources on a wide scale.