RESUMEN

Lead (Pb) is a heavy metal known for its adverse effects on both human health and the environment. In recent years, the industrial utilization of Pb2+ has surged, underscoring the imperative need for efficient measurement methods. In this study, a rapid and simple photochemical method was used to synthesize thioglycolic acid (TGA)-stabilized CdTe/ZnSe core-shell quantum dots (QDs). These CdTe/ZnSe QDs emit vibrant green fluorescence and exhibit remarkable quenching in the presence of Pb2+ ions. This property enables the development of an on-site on/off sensor without the necessity of additional modifications. The proposed sensor possesses an outstanding sensitivity to Pb2+, with a detection limit and linear range of 31.8 nM and 50 nM-10 µM, respectively. Importantly, the selectivity of this fluorescence-based sensor was validated by analyzing various positively and negatively charged ions. Furthermore, the developed sensor showed reliable performance against real river, agricultural, and tap water, as confirmed by Inductively Coupled Plasma (ICP) analysis. Additionally, CdTe/ZnSe QDs immobilized on glass slides were successfully employed for on-site water sample analysis, providing a versatile solution for environmental monitoring.

RESUMEN

Teicoplanin has been banned in the veterinary field due to the drug resistance of antibiotics. However, teicoplanin residue from the antibiotic abuse of humans and animals poses a threat to people's health. Therefore, it is necessary to develop an efficient way for the highly accurate and reliable detection of teicoplanin from humans, food, and water. In this study, novel imprinted quantum dots of teicoplanin were prepared based on boronate affinity-based precisely controlled surface imprinting. The imprinting factor (IF) for teicoplanin was evaluated and reached a high value of 6.51. The results showed excellent sensitivity and selectivity towards teicoplanin. The relative fluorescence intensity was inversely proportional to the concentration of teicoplanin, in the range of 1.0-17 µM. And its limit of detection (LOD) was obtained as 0.714 µM. The fluorescence quenching process was mainly controlled by a static quenching mechanism via the non-radiative electron-transfer process between QDs and the five-membered cyclic boronate esters. The recoveries for the spiked urine, milk, and water samples ranged from 95.33 to 104.17%, 91.83 to 97.33, and 94.22 to 106.67%, respectively.

Asunto(s)

RESUMEN

Diabetes is a chronic metabolic disease characterized by high blood glucose (or blood sugar) levels, which harms the heart, blood vessels, eyes, kidneys, and nerves over time. So, it is crucial to regularly control glucose concentration in biological fluids to check its targets, reduce unpleasant symptoms of high and low blood sugar, and avoid long-term diabetes complications. This study developed a simple, rapid, sensitive, and cost-effective fluorescence system for glucose determination. The fluorescent Aptasensor was fabricated using cadmium telluride quantum dots (CdTe QDs) modified with thioglycolic acid and functionalized with thiol-glucose-aptamer through ligand exchange. The thiol-glucose-aptamer interacted directly with CdTe QDs, increasing fluorescence intensity. However, it decreased when the target molecules of glucose were introduced. The structural and morphological characteristics of the Aptasensor were confirmed by various analytical methods such as UV-visible spectroscopy, Fourier-transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy dispersive x-ray spectroscopy (EDX), transmission electron microscopy (TEM), atomic force microscopy (AFM), and dynamic light scattering (DLS). According to the typical Stern-Volmer equation, the relationship between fluorescent quenching and target concentration was linear with a detection limit (LOD) of 0.13 ± 1.95 × 10-11 mol L-1 and a relative standard deviation (RSD) of 1.05%. The Aptasensor demonstrated high specificity towards the target and stability over 28 days. Furthermore, it detected glucose in human serum and urine with a recovery rate of up to 99.74%. The results indicate that the fluorescent Aptasensor could be valuable in developing robust sensing technology for low-concentrated analytes.

RESUMEN

Mercury (Hg), a notorious heavy metal with detrimental impacts on human health and the environment, necessitates the development of precise measurement methods. This study introduces an expeditious and straightforward photochemical approach to synthesize thioglycolic acid (TGA)-stabilized CdTe/CdS/ZnS core/multi-shell quantum dots (QDs). The synthesized CdTe/CdS/ZnS QDs were comprehensively characterized using fluorescence spectroscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), Field Emission Scanning Electron Microscopy (FESEM), and X-Ray diffraction (XRD). XRD and EDS results confirmed the successful formation of CdTe/CdS/ZnS structure. Also, FESEM and TEM results showed that CdTe/CdS/ZnS QDs were spherical. Results showed that synthesized Exhibiting vibrant green fluorescence and notable quenching in the presence of Hg2+ ions, these QDs emerge as promising candidates for fabricating a fluorescent sensor. The proposed sensor demonstrates notable sensitivity to Hg2+, featuring a detection limit of 16.32 nM and a linear range from 20 nM to 70 nM. The sensor's selectivity was confirmed by analyzing various anions and cations. Moreover, when tested with tap water, river water, and agricultural samples, the sensor exhibited reliable performance, validated by Inductively Coupled Plasma (ICP) analysis. Additionally, CdTe/CdS/ZnS QDs immobilized on micro pads proved effective for on-site water sample analysis, presenting a versatile solution for environmental monitoring.

RESUMEN

The development of fluorescent molecular imprinting sensors for direct, rapid, and sensitive detection of small organic molecules in aqueous systems has always presented a significant challenge in the field of detection. In this study, we successfully prepared a hydrophilic colloidal molecular imprinted polymer (MIP) with 2,4-dichlorophenoxyacetic acid (2,4-D) using a one-pot approach that incorporated polyglycerol methacrylate (PGMMA-TTC), a hydrophilic macromolecular chain transfer agent, to mediate reversible addition-fragmentation chain transfer precipitation polymerization (RAFTPP). To simplify the polymerization process while achieving ratiometric fluorescence detection, red fluorescent CdTe quantum dots (QDs) and green fluorescent nitrobenzodiazole (NBD) were introduced as fluorophores (with NBD serving as an enhancer to the template and QDs being inert). This strategy effectively eliminated background noise and significantly improved detection accuracy. Uniform-sized MIP microspheres with high surface hydrophilicity and incorporated ratiometric fluorescent labels were successfully synthesized. In aqueous systems, the hydrophilic ratio fluorescent MIP exhibited a linear response range from 0 to 25 µM for the template molecule 2,4-D with a detection limit of 0.13 µM. These results demonstrate that the ratiometric fluorescent MIP possesses excellent recognition characteristics and selectivity towards 2,4-D, thus, making it suitable for selective detection of trace amounts of pesticide 2,4-D in aqueous systems.

RESUMEN

A dual-emission ratiometric fluorescence sensor (CDs@CdTe@MIP) with a self-calibration function was successfully constructed for AMO detection. In the CDs@CdTe@MIP system, non-imprinted polymer-coated CDs and molecule-imprinted polymer-coated CdTe quantum dots were used as the reference signal and response elements, respectively. The added AMO quenched the fluorescence of the CdTe quantum dots, whereas the fluorescence intensity of the CDs remained almost unchanged. The AMO concentration was monitored using the fluorescence intensity ratio (log(I647/I465)0/(I647/I465)) to reduce interference from the testing environment. The sensor with a low detection limit of 0.15 µg/L enabled detection of the AMO concentration within 6 min. The ratiometric fluorescence sensor was used to detect AMO in spiked pork samples; it exhibited a high recovery efficiency and relative standard deviation (RSD) of 97.94-103.70% and 3.77-4.37%, respectively. The proposed highly sensitive and selective platform opens avenues for sensitive, reliable, and rapid determination of pharmaceuticals in the environment and food safety monitoring using ratiometric sensors.

Asunto(s)

RESUMEN

Effective X-ray photon-counting spectral imaging (x-CSI) detector design involves the optimisation of a wide range of parameters both regarding the sensor (e.g., material, thickness and pixel pitch) and electronics (e.g., signal-processing chain and count-triggering scheme). Our previous publications have looked at the role of pixel pitch, sensor thickness and a range of additive charge sharing correction algorithms (CSCAs), and in this work, we compare additive and subtractive CSCAs to identify the advantages and disadvantages. These CSCAs differ in their approach to dealing with charge sharing: additive approaches attempt to reconstruct the original event, whilst subtractive approaches discard the shared events. Each approach was simulated on data from a wide range of x-CSI detector designs (pixel pitches 100-600 µm, sensor thickness 1.5 mm) and X-ray fluxes (106-109 photons mm-2 s-1), and their performance was characterised in terms of absolute detection efficiency (ADE), absolute photopeak efficiency (APE), relative coincidence counts (RCC) and binned spectral efficiency (BSE). Differences between the two approaches were explained mechanistically in terms of the CSCA's effect on both charge sharing and pule pileup. At low X-ray fluxes, the two approaches perform similarly, but at higher fluxes, they differ in complex ways. Generally, additive CSCAs perform better on absolute metrics (ADE and APE), and subtractive CSCAs perform better on relative metrics (RCC and BSE). Which approach to use will, thus, depend on the expected operating flux and whether dose efficiency or spectral efficiency is more important for the application in mind.

RESUMEN

While the dominant defects which control non-radiative recombination and long-range interstitial diffusion in CdTe correspond to Cd vacancies and Te anti-sites, the short-range diffusion of Te and Se interstitials between these defects is also of interest, since they both play a role in defect passivation. In addition, since CdTe thin films are typically polycrystalline and may also involve interfaces with materials with different lattice constants, the effects of strain are also of interest. Here we present the results of molecular dynamics (MD) simulations of Te interstitial diffusion in zincblende CdTe for values of the triaxial strain ranging from -2% (compressive) strain to +2.8% (tensile) strain. By carrying out MD simulations of Te interstitial diffusion over a range of temperatures, and then carrying out Arrhenius fits, we have determined the effective activation barrierEaand prefactorD0for each value of the global strain. We find that bothEaandD0exhibit non-monotonic behavior, increasing with both compressive and tensile strain. We also present an analysis of the key diffusion pathways for 3 different values of the strain which explains the non-monotonic strain dependence obtained in our simulations. Our results also indicate that in each case, the diffusion of interstitial Te involves a variety of concerted events with a wide range of activation barriers.

RESUMEN

Due to the complexity of regulatory networks of disease-related biomarkers, developing simple, sensitive, and accurate methods has remained challenging for precise diagnosis. Herein, an "AND" logic gates DNA molecular machine (LGDM) was constructed, which was powered by the catalytic hairpin assembly (CHA). It was coupled with dual-emission CdTe quantum dots (QDs)-based cation exchange reaction (CER) for label-free, sensitive, and ratiometric fluorescence detection of APE1 and miRNA biomarkers. Benefiting from synergistic signal amplification strategies and a ratiometric fluorometric output mode, this LGDM enables accurate logic computing with robust and significant output signals from weak inputs. It offers improved sensitivity and selectivity even in cell extracts. Using dual-emission spectra CdTe QDs, with a ratiometric signal output mode, ensured good stability and effectively prevented false-positive signals from intrinsic biological interferences compared to the approach relying on a single signal output mode, which enabled the LGDM to achieve rapid, efficient, and accurate natural drug screening against APE1 inhibitors in vitro and cells. The developed method provides impetus to streamline research related to miRNA and APE1, offering significant promise for widespread application in drug development and clinical analysis.

Asunto(s)

RESUMEN

Colloidal two-dimensional (2D) nanoplatelets (NPLs) have been extensively studied owing to promising potential in optoelectronic applications. Here, we have reported the preparation of 2D CdSeTe alloy NPLs and investigated their energy and charge transfer with porphyrin molecules. The red shifting in the optical properties suggests the change in the band gaps. Furthermore, the energy and the charge transfer are evident in the composite of CdSeTe alloy NPLs with 5,10,15,20-tetra(4pyridyl)-porphyrin (TpyP) molecules. The quenching in the photoluminescence (PL) spectra and PL decay time supports the energy transfer (~61 % efficiency) and the charge transfer. The thermodynamically feasible hole transfer is evidenced by the band alignment of the alloy NPLs and TpyP molecules, which is further supported by a transient absorption spectroscopy (TAS) study. The TA study found the hole transfer within ~3 ps time scale, proving the effective charge carrier separation for better optoelectronic applications.

RESUMEN

The development of low-cost and highly sensitive ratiometric fluorescence sensor, CdTe@MIPs/MgF2, for N-Ethylpentylone (NEP) detection in wastewater samples is described. In this system, CdTe@MIPs (λex = 370, λem = 570) are employed as the receptor and response unit for NEP, with MgF2 (λex = 370, λem = 470) as the reference signal to enhance stability. Under optimal conditions, the sensor shows fluorescent quenching response at 570 nm to NEP in linear range of 2-200 nM, with LOD of 0.6 nM. The sensor also demonstrates significant selectivity for NEP over other analogues and interferents, making it ideal for practical applications in wastewater analysis. This approach is potentially more cost-effective and sensitive than conventional mass spectrometry in detecting abused substances in sewage. Additionally, the MgF2 fluorescent nano-material was first-ever developed and investigated, which may be significant in future research.

RESUMEN

The remarkable applicability and unique properties of CdTe nanoparticles make them vital in various applications such as optoelectronics and photovoltaics. It has been demonstrated that adding a metal dopant to a nanomaterial matrix significantly improves its characteristics, increasing its potential for a variety of applications. In this work, a simple hydrothermal synthesis process for bidoped CdTe nanoparticles is reported, wherein four distinct samples are generated by adjusting the concentration of Bi doping. Structural analysis using X-ray diffraction (XRD) confirmed the presence of the CdTe cubic phase in the material with observable phase shifts due to Bi incorporation. Rietveld refinement of the XRD results further enabled a detailed structural analysis. Raman spectroscopy provided insights into the different vibrational modes of CdTe, while transmission electron microscopy analysis further elucidated the CdTe phase and determined interplanar spacing values. Morphological examination via field emission scanning electron microscopy revealed a consistent nanoparticle-like morphology, unaffected even by increased Bi concentration. Elemental analysis conducted through inductively coupled plasma mass spectrometry offered valuable insights into the composition of the material. Furthermore, UV-vis analysis revealed a decrease in the bandgap, indicating potential shifts in the material's optical properties. Notably, the photoresponse study demonstrated an increase in current value, as well as alterations in the rise and decay times of the material. These properties highlight its potential for various optical and electrical applications. Overall, these findings underscore the promising prospects of bidoped CdTe nanoparticles in various advancements.

RESUMEN

Herein, a ratiometric fluorimetric nanosensor is introduced for the sensitive and selective analysis of chlorpromazine (CPZ) via employing blue-emitting B-doped carbon dots (B-CDs) as the reference fluorophore and green-emitting CdTe capped thioglycolic acid (TGA) quantum dots (TGA-CdTe-QDs) as the specific recognition probe. The sensor exhibits dual emission centered at 440 and 560 nm, under a single excitation wavelength of 340 nm. Upon the addition of ultra-trace amount of CPZ, the fluorescence signal of TGA-CdTe-QDs declines due to electron transfer process from excited TGA-CdTe-QDs to CPZ molecules, whereas the fluorescence peak of B-CDs is unaffected. Therefore, a new fluorimetric platform was prepared for the assay of CPZ in the range of 2.2 × 10-10 to 5.0 × 10-9 M with a detection limit of 1.3 × 10-10 M. Moreover, the practicability of the designed strategy was investigated for the detection of CPZ in biological samples and the results demonstrate that it possesses considerable potential to be utilized in practical applications.

Asunto(s)

RESUMEN

Exploring the construction of an interface with bright emission, fabulous stability, and good function to develop high-performance electrochemiluminescence (ECL) biosensors for tumor biomarkers is in high demand but faces a huge challenge. Herein, we report an oriented attachment and in situ self-assembling strategy for one-step fabrication of CdTe QD-encapsulated Hf polymer membrane onto an ITO surface (Hf-CP/CdTe QDs/APS/ITO). Hf-CP/CdTe QDs/APS/ITO is fascinating with excellent stability, high ECL emission, and specific adsorption toward ssDNA against dsDNA and mononucleotides (mNs). These interesting properties make it an ideal interface to rationally develop an immobilization-free ECL biosensor for cancer antigen 125 (CA125), used as a proof-of-concept analyte, based on target-aptamer recognition-promoted exonuclease III (Exo III)-assisted digestion. The recognition of ON by CA125 leads to the formation of CA125@ON, which hybridizes with Fc-ssDNA to switch Exo III-assisted digestion, decreasing the amount of Fc groups anchored onto the electrode's surface and blocking electron transfer. As compared to the case where CA125 was absent, significant ECL emission recovery is determined and relies on CA125 concentration. Thus, highly sensitive analysis of CA125 against other biomarkers was achieved with a limit of detection down to 2.57 pg/mL. We envision this work will provide a new path to develop ECL biosensors with excellent properties, which shows great potential for early and accurate diagnosis of cancer.

Asunto(s)

RESUMEN

Although cadmium-based quantum dots (QDs) are highly promising candidates for numerous biological applications, their intrinsic toxicity limits their pertinency in living systems. Surface functionalization of QDs with appropriate molecules could reduce the toxicity level. Herein, we have synthesized the smaller sized (1-5 nm) aqueous-compatible biogenic CdTe QDs using human serum albumin (HSA) as a surface passivating agent via a greener approach. HSA-functionalized CdTe QDs have been explored in multiple in vitro sensing and biological applications, namely, (1) sensing, (2) anti-bacterial and (3) anti-cancer properties. Using CdTe-HSA QDs as a fluorescence probe, a simple fluorometric method has been developed for highly sensitive and selective detection of blood marker bilirubin and hazardous Hg2+ ion with a limit of detection (LOD) of 3.38 and 0.53 ng/mL, respectively. CdTe-HSA QDs also acts as a sensor for standard antibiotics, tetracycline and rifampicin with LOD values of 41.34 and 114.99 ng/mL, respectively. Nano-sized biogenic CdTe-HSA QDs have shown promising anti-bacterial activities against both gram-negative, E. coli and gram-positive, E. faecalis strains confirming more effectiveness against E. faecalis strains. The treatment of human cervical cancer cell lines (HeLa cells) with the synthesized QDs reflected the proficient cytotoxic properties of QDs.

Asunto(s)

RESUMEN

Plasmon enhanced fluorescent (PEF) with more "hot spots" play a critical role in signal amplified technology to avoid the intrinsic limitation of fluorophore which ascribed to a strong electromagnetic field at the tip structure. However, application of PEF technique to obtain a highly sensitive analysis of medicine was still at a very early stage. Herein, a simple but versatile Ag nanocubes (Agcubes)-based PEF sensor combined with aptamer (Agcubes@SiO2-QDs-Apt) was proposed for highly sensitive detection of berberine hydrochloride (BH). The distance between the plasma Agcubes and the red-emitted CdTe quantum dots (QDs) were regulated by the thickness of silica spacer. The three-dimensional finite-difference time-domain (3D-FDTD) simulation further revealed that Agcubes have a higher electromagnetic field than Ag nanospheres. Compared with PEF sensor, signal QDs-modified aptamer without Agcubes (QDs-Apt) showed a 10-fold higher detection limit. The linear range and detection limit of the Agcubes@SiO2-QDs-Apt were 0.1-100 µM, 87.3 nM, respectively. Furthermore, the PEF sensor was applied to analysis BH in the berberine hydrochloride tablets, compound berberine tablet and urine with good recoveries of 98.25-102.05%. These results demonstrated that the prepared PEF sensor has great potential for drug quality control and clinical analysis.

Asunto(s)

RESUMEN

In March 2024 - based on computer simulation - it was reported that 2-junction 1.5 eV CdTe/0.87 eV FeSi2 solar cells can achieve actual power conversion efficiency of 43.9 %, open circuit voltage of 1.928 V, and fill factor of 89.88 % at 300 K when the cells are irradiated by the air mass 1.5 global (AM1.5G) solar spectrum [M. H. Tonmoy et al., Heliyon 10 (2024) e27994]. These simulated values exceed the ideal detailed balance-limiting power conversion efficiency, open circuit voltage, and fill factor of a 1.5 eV/0.87 eV 2-junction solar cell.

RESUMEN

In this study, we have developed a novel fluorescent "OFF-ON" quantum dots (QDs) sensor based on CdTe/CdS/SiO2 cores. Ammonium pyrrolidine dithiocarbamate (APDC), ethylenediamine tetraacetic acid (EDTA), and 1,10-phenanthroline (Phen) served as potential chemical etchants. Among these three etchants, APDC exhibited the most pronounced quenching effect (94.06%). The APDC-etched CdTe/CdS/SiO2 QDs demonstrated excellent optical properties: the fluorescence of the APDC-etched CdTe/CdS/SiO2 QDs system (excitation wavelength: 365 nm and emission wavelength: 622 nm) was significantly and selectively restored upon the addition of cadmium ions (Cd2+) (89.22%), compared to 15 other metal ions. The linear response of the APDC-etched CdTe/CdS/SiO2 QDs was observed within the cadmium ion (Cd2+) concentration ranges of 0-20 µmol L-1 and 20-160 µmol L-1 under optimized conditions (APDC: 300 µmol L-1, pH: 7.0, reaction time: 10 min). The detection limit (LOD) of the APDC-etched CdTe/CdS/SiO2 QDs for Cd2+ was 0.3451 µmol L-1 in the range of 0-20 µmol L-1. The LOD achieved by the QDs in this study surpasses that of the majority of previously reported nanomaterials. The feasibility of using APDC-etched CdTe/CdS/SiO2 QDs for Cd2+ detection in seawater, freshwater, and milk samples was verified, with average recoveries of 95.27%-110.68%, 92%-106.47%, and 90.73%-111.60%, respectively, demonstrating satisfactory analytical precision (RSD ≤ 8.26).

RESUMEN

This article theoretically demonstrates an enormously efficient CdTe-FeSi2 based dual-junction tandem solar cell accompanied by slender semiconductor layers. The peak efficiency of the device has been ensured through the optimization of its various attributes of window, CdTe (bandgap 1.5 eV) top absorber, FeSi2 (bandgap 0.87 eV) bottom absorber and back surface layers. Additionally, the impacts of thickness, doping and the level of defects in different window, base and rear surface layers have been examined to observe how different layers affect the solar cell's performance. The optimized n-CdS/p-CdTe/p+-MoS2--n-CdS/p-FeSi2/p+-Cu2SnS3 dual-junction tandem solar device displays an efficiency of 43.9% with a voltage at no load, VOC of 1.928 V, current density under a closed circuit, JSC of 25.34 mA/cm2, and fill factor of 89.88%, respectively. These results disclose the high potential of the suggested solar cell based on CdTe and FeSi2 compounds.

RESUMEN

In this work, a simple and sensitive N-acetyl-L-cysteine (NAC)-covered CdTe quantum dots (NAC-CdTe QDs) fluorescence probe for continuous detection of Co2+ and pyrophosphate ions (PPi, P2O74-) was synthesized. The fluorescence of the quantum dots was significantly quenched by Co2+ through the coordination of Co2+ and the carboxyl groups on the NAC-CdTe quantum dots. Interestingly, the combination of NAC-CdTe quantum dots with Co2+ yields a new fluorescence probe of Co2+-modified NAC-CdTe QDs (Co2+@NAC-CdTe). The addition of PPi restored the fluorescence due to the competition between PPi and carboxyl groups with Co2+ causing Co2+ to detach from the surface of Co2+@NAC-CdTe quantum dots. Thus, a sensitive and reversible detection of Co2+ and PPi had been successfully established. The Co2+@NAC-CdTe quantum dots fluorescence probe exhibits excellent selectivity and high sensitivity toward PPi detection with low detection limit of 0.28 µM. In addition, the novel fluorescence probe was successfully applied to detect the concentration of PPi in environmental water samples and in-vitro cells imaging.