RESUMEN
Antioxidant films were prepared using poly(vinyl chloride) (PVC) incorporated with 0.5% or 1.0% zinc oxide (ZnO)-flavonoid (quercetin or morin) nanoparticles (NPZnO-Q% or NPZnO-M%) via the casting method. NP incorporation within the polymer matrix influenced the structural, morphological, optical, and thermal properties of the PVC-based films, as well as their antioxidant activity as assessed using the DPPH radical scavenging method. Our results indicated that increasing ZnO-flavonoid NP concentration increased films thickness, while reducing ultraviolet light (UV) transmittance but conserving transparency. The presence of NPZnO-Q% or NPZnO-M% improved the surface uniformity and thermal stability of the active films. In terms of antioxidant activity, there was an enhancement in the DPPH radical scavenging capacity (PVC/ZnO-Q1.0% > PVC/ZnO-Q0.5% > PVC/ZnO-M0.5% > PVC/ZnO-M1.0% > PVC), suggesting that the packaging can help protect food from oxidative processes. Therefore, these antioxidant films represent an innovative strategy for using as active food packaging material, especially intended for aiding in quality preservation and extending the shelf life of fatty foods.
RESUMEN
Chia (Salvia hispanica L.) flour seeds produce films with good barrier properties against water vapor and could be used as food packaging; however, their mechanical properties are poor, which limits their application. The incorporation of nanoparticles into natural polymers is a strategy used to improve the properties of films to increase their applications. Furthermore, nanoparticles can encapsulate antioxidant agents and generate active films. The objective of this study was to evaluate the influence of chia flour (4%-7%), glycerol (15%-25%), and chia extract-loaded chitosan nanoparticles (ChCNp) (0%-0.75%) on the physical, mechanical, barrier, structural and antioxidant properties of chia flour nanocomposite films. Chitosan nanoparticles loaded with antioxidant chia extract were synthesized by ionic gelation and incorporated into the films. The thickness, water vapor permeability, tensile strength, and antioxidant properties of the films were evaluated using a Box-Behnken experimental design. Structural analysis was conducted using the FTIR technique. The results of the ANOVA of the responses were adjusted to second and third order polynomial models obtaining determination coefficients of 0.96-0.99. The water vapor permeability of the films was 3.89 × 10-8-1.68 × 10-7 g mm/Pa s m2, tensile strength was 0.67-3.59 MPa and antioxidant activity was 57.12%-67.84%. The variables presented different effects on the films. Increasing the chia seed flour concentration negatively affected the water vapor permeability but improved the tensile strength and the antioxidant capacity of the films. The increase in glycerol concentration caused the films to become brittle. The nanoparticles had a significant effect on the thickness of the films and improved their mechanical and antioxidant properties. However, they did not show an effect on barrier properties. The results demonstrate that it is possible to obtain nanocomposite films with antioxidant capacity from chia seed flour and with the incorporation of chitosan nanoparticles loaded with antioxidants.
RESUMEN
The aim of this study was to develop a star fruit extract (SFE) and incorporate it into aerogels based on native and phosphorylated potato starches. The phosphorylation of starch enhances its properties by incorporating phosphate groups that increase the spaces between starch molecules, resulting in a more resilient, intact aerogel with enhanced water absorption. The bioactive aerogels based on potato starch and 10, 15, and 20 % (w/w) of SFE were characterized by their morphological and thermogravimetric properties, infrared spectra, water absorption capacity, loading capacity, and antioxidant activity. Epicatechin was the major compound present in SFE. The thermal stability of SFE increased when incorporated into phosphorylated starch aerogels at a concentration of 20 %. The water absorption capacity was higher in phosphorylated starch aerogels (reaching 1577 %) than in their native counterparts (reaching 1100 %). Native starch aerogels with 15 and 20 % SFE exhibited higher antioxidant activity against hydroxyl free radicals compared to phosphorylated starch aerogels, achieving 79.9 % and 86.4 % inhibition for the hydroxyl and nitric oxide radicals, respectively. The ideal choice of freeze-dried aerogel depends on the desired effect, either to act as an antioxidant agent by releasing bioactive compounds from SFE or as a water-absorbent agent in food products.
Asunto(s)
Antioxidantes , Frutas , Geles , Extractos Vegetales , Solanum tuberosum , Almidón , Solanum tuberosum/química , Geles/química , Extractos Vegetales/química , Extractos Vegetales/farmacología , Almidón/química , Fosforilación , Antioxidantes/química , Antioxidantes/farmacología , Frutas/química , Averrhoa/química , Agua/químicaRESUMEN
This study aimed to evaluate the antimicrobial effect of thymol and carvacrol in inhibiting Escherichia coli and Salmonella serovar Typhimurium inoculated on a fresh green salad through the vapor phase. A film-forming solution was prepared by dissolving starch, sorbitol, and variying concentrations of carvacrol, thymol, and a mixture of both. The film-forming solution containing the respective antimicrobial agent was then added lid, which was sealed rigidly and hermetically to achieve different concentrations (105 mg/L of air of carvacrol, 105 mg/L of air of thymol, and a mixture of 52 mg/L of air of carvacrol and 52 mg/L of air of thymol). Each active package contained fresh green salad inoculated with E. coli or Salmonella serovar Typhimurium. The active packages were then sealed and refrigerated at a temperature of 6 °C for 48 h. Growth/inhibition curves were modelled using the Weibull equation, and consumer acceptance was evaluated. Carvacrol can reduce up to 0.5 log-cycles, while thymol can reach almost 1 log cycle. Blending the components with half the concentration has a synergistic effect, inhibiting up to 2.5 log cycles. Consumer ratings revealed no significant differences between the packages. However, the average score was 5.4 on a 9-point hedonic scale, evaluators' comments did not indicate dislike or a strong taste characteristic of thymol and carvacrol.
RESUMEN
UV radiation was combined with the incorporation of fish protein hydrolysates to improve the performance of active bio-based films for food packaging. UV radiation was not used previously to enhance the packaging performance of blend films of starch/protein, and fish protein hydrolysates were not incorporated in bio-based polymer surfaces previously. Rice starch and fish proteins (from Whitemouth croaker muscle) were utilized to prepare films by the casting technique, which were UV-radiated under different exposure times (1, 5, and 10 min). The packaging performance of the films was determined according to the mechanical and barrier performance, solubility, and color. Fish protein hydrolysates (from Argentine croaker muscle) were then incorporated into the films (bulk structure or surface). The results showed that UV radiation for 1 min increased the tensile strength and modified the optical properties of films. It also altered the structure of the polymeric matrix, as demonstrated by the microstructure and thermal analysis, in agreement with the data obtained in packaging properties. The evaluation of antioxidant capacity through 2,2-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) and reducing power indicated that incorporating fish protein hydrolysates either in the films' bulk structure or film surface promoted antioxidant properties; control films (produced with rice starch/fish proteins without hydrolysates) also presented antioxidant potential. According to the peroxide value and thiobarbituric acid reactive substance (TBARS) assays, control films and the films containing hydrolysates in their bulk structure or on the surface could prevent the lipid oxidation of Italian salami. Thus, combining UV radiation to shape the characteristics of bio-based materials with fish protein hydrolysates to reduce lipid oxidation contributes to the performance of active bio-based films for food packaging.
RESUMEN
Endolysins are bacteriophage (or phage)-encoded enzymes that catalyse the peptidoglycan breakdown in the bacterial cell wall. The exogenous action of recombinant phage endolysins against Gram-positive organisms has been extensively studied. However, the outer membrane acts as a physical barrier when considering the use of recombinant endolysins to combat Gram-negative bacteria. This study aimed to evaluate the antimicrobial activity of the SAR-endolysin LysKpV475 against Gram-negative bacteria as single or combined therapies, using an outer membrane permeabilizer (polymyxin B) and a phage, free or immobilized in a pullulan matrix. In the first step, the endolysin LysKpV475 in solution, alone and combined with polymyxin B, was tested in vitro and in vivo against ten Gram-negative bacteria, including highly virulent strains and multidrug-resistant isolates. In the second step, the lyophilized LysKpV475 endolysin was combined with the phage phSE-5 and investigated, free or immobilized in a pullulan matrix, against Salmonella enterica subsp. enterica serovar Typhimurium ATCC 13311. The bacteriostatic action of purified LysKpV475 varied between 8.125 µgâ¯ml-1 against Pseudomonas aeruginosa ATCC 27853, 16.25 µgâ¯ml-1 against S. enterica Typhimurium ATCC 13311, and 32.50 µgâ¯ml-1 against Klebsiella pneumoniae ATCC BAA-2146 and Enterobacter cloacae P2224. LysKpV475 showed bactericidal activity only for P. aeruginosa ATCC 27853 (32.50 µgâ¯ml-1) and P. aeruginosa P2307 (65.00 µgâ¯ml-1) at the tested concentrations. The effect of the LysKpV475 combined with polymyxin B increased against K. pneumoniae ATCC BAA-2146 [fractional inhibitory concentration index (FICI) 0.34; a value lower than 1.0 indicates an additive/combined effect] and S. enterica Typhimurium ATCC 13311 (FICI 0.93). A synergistic effect against S. enterica Typhimurium was also observed when the lyophilized LysKpV475 at â MIC was combined with the phage phSE-5 (m.o.i. of 100). The lyophilized LysKpV475 immobilized in a pullulan matrix maintained a significant Salmonella reduction of 2 logs after 6 h of treatment. These results demonstrate the potential of SAR-endolysins, alone or in combination with other treatments, in the free form or immobilized in solid matrices, which paves the way for their application in different areas, such as in biocontrol at the food processing stage, biosanitation of food contact surfaces and biopreservation of processed food in active food packing.
Asunto(s)
Antibacterianos , Endopeptidasas , Glucanos , Polimixina B , Fagos de Salmonella , Endopeptidasas/farmacología , Endopeptidasas/química , Endopeptidasas/metabolismo , Polimixina B/farmacología , Antibacterianos/farmacología , Antibacterianos/química , Fagos de Salmonella/genética , Fagos de Salmonella/fisiología , Fagos de Salmonella/química , Glucanos/química , Glucanos/farmacología , Animales , Pruebas de Sensibilidad Microbiana , Bacterias Gramnegativas/efectos de los fármacos , Bacterias Gramnegativas/virología , Ratones , Salmonella typhimurium/virología , Salmonella typhimurium/efectos de los fármacos , Bacteriófagos/fisiología , Bacteriófagos/genética , Proteínas Virales/genética , Proteínas Virales/metabolismo , Proteínas Virales/farmacología , Proteínas Virales/químicaRESUMEN
The synthesis of active films with natural antimicrobials from renewable sources offers an alternative to conventional non-biodegradable packaging and synthetic additives. This study aimed to develop cassava starch films with antimicrobial activity by incorporating either free carvacrol or chia mucilage nanocapsules loaded with carvacrol (CMNC) and assess their impact on the physical, mechanical, and barrier properties of the films, as well as their efficacy against foodborne pathogens. The addition of free carvacrol led to a reduction in mechanical properties due to its hydrophobic nature and limited interaction with the polymeric matrix. Conversely, CMNC enhanced elongation at break and reduced light transmission, with a more uniform distribution in the polymeric matrix. Films containing 8% carvacrol exhibited inhibitory effects against Salmonella and Listeria monocytogenes, further potentiated when encapsulated in chia mucilage nanocapsules. These findings suggest that such films hold promise as active packaging materials to inhibit bacterial growth, ensuring food safety and extending shelf life.
RESUMEN
The advances in nanocomposites incorporating bioactive substances have the potential to transform the food packaging sector. Different nanofillers have been incorporated into polymeric matrixes to develop nanocomposite materials with improved mechanical, thermal, optical and barrier properties. Nanoclays, nanosilica, carbon nanotubes, nanocellulose, and chitosan/chitin nanoparticles have been successfully included into polymeric films, resulting in packaging materials with advanced characteristics. Nanostructured antimicrobial films have promising applications as active packaging in the food industry. Nanocomposite films containing antimicrobial substances such as essential oils, bacteriocins, antimicrobial enzymes, or metallic nanoparticles have been developed. These active nanocomposites are useful packaging materials to enhance food safety. Nanocomposites are promising materials for use in food packaging applications as practical and safe substitutes to the traditional packaging plastics.
RESUMEN
This study produced pH-sensing carboxymethyl cellulose (CMC) films functionalized with bioactive compounds obtained by pressurized liquid extraction (PLE) of grape peel to monitor the freshness of pork and milk. A semi-continuous PLE was conducted using hydroethanolic solution (70:30, v/v) at a flow rate of 5 mL/min, 15 MPa, and 60 °C. The films were produced by the casting technique using CMC (2.5 %, w/v), glycerol (1 %, v/v), and functionalized with 10, 30, and 50 % (v/v) grape peel extract. From the results obtained, LC-MS/MS revealed that PLE extracted twenty-seven phenolic compounds. The main phenolic compounds were kaempferol-3-glucoside (367.23 ± 25.88 µg/mL), prunin (270.23 ± 3.62 µg/mL), p-coumaric acid (236.43 ± 26.02 µg/mL), and procyanidin B1 (117.17 ± 7.29 µg/mL). The CMC films presented suitable color and mechanical properties for food packaging applications. The addition of grape peel extract promoted the pH-sensing property, showing the sensitivity of anthocyanins to pH changes. The films functionalized with grape peel extract presented good release control of bioactive compounds, making them suitable for food packaging applications. When applied to monitor the freshness of pork and milk, the films exhibited remarkable color changes associated with the pH of the food during storage. In conclusion, PLE is a sustainable approach to obtaining bioactive compounds from the grape peel, which can be applied in the formulation of pH-sensing films as a promising sustainable material to monitor food freshness during storage.
Asunto(s)
Carne de Cerdo , Carne Roja , Vitis , Animales , Porcinos , Carboximetilcelulosa de Sodio/química , Carne Roja/análisis , Leche , Antocianinas/química , Cromatografía Liquida , Concentración de Iones de Hidrógeno , Espectrometría de Masas en Tándem , FenolesRESUMEN
Natural cyclodextrins (CDs) can be formed by 6, 7, or 8 glucose molecules (α-, ß-, and γ-, respectively) linked in a ring, creating a cone shape. Its interior has an affinity for hydrophobic molecules, while the exterior is hydrophilic and can interact with water molecules. This feature has been used to develop active packaging applied to food, interacting with the product or its environment to improve one or more aspects of its quality or safety. It also provides monitoring information when food is optimal for consumption, as intelligent packaging is essential for the consumer and the merchant. Therefore, this review will focus on discerning which packaging is most appropriate for each situation, solubility and toxicological considerations, characterization techniques, effect on the guest properties, and other aspects related to forming the inclusion complex with bioactive molecules applied to packaging.
RESUMEN
Muscle foods are highly perishable products that require the use of additives to inhibit lipid and protein oxidation and/or the growth of spoilage and pathogenic microorganisms. The reduction or replacement of additives used in the food industry is a current trend that requires the support of active-packaging technology to overcome novel challenges in muscle-food preservation. Several nano-sized active substances incorporated in the polymeric matrix of muscle-food packaging were discussed (nanocarriers and nanoparticles of essential oils, metal oxide, extracts, enzymes, bioactive peptides, surfactants, and bacteriophages). In addition, the extension of the shelf life and the inhibitory effects of oxidation and microbial growth obtained during storage were also extensively revised. The use of active packaging in muscle foods to inhibit oxidation and microbial growth is an alternative in the development of clean-label meat and meat products. Although the studies presented serve as a basis for future research, it is important to emphasize the importance of carrying out detailed studies of the possible migration of potentially toxic additives, incorporated in active packaging developed for muscle foods under different storage conditions.
RESUMEN
Ethylene is a phytohormone that is responsible of fruit and vegetable ripening. TiO2 has been studied as a possible solution to slowing down unwanted ripening processes, due to its photocatalytic capacity which enables it to remove ethylene. Thus, the objective of this study was to develop nanocomposites based on two types of eco-friendly materials: Mater-Bi® (MB) and poly(lactic acid) (PLA) combined with nano-TiO2 for ethylene removal and to determine their ethylene-removal capacity. First, a physical-chemical characterization of nano-TiO2 of different particle sizes (15, 21, 40 and 100 nm) was done through structural and morphological analysis (DRX, FTIR and TEM). Then, its photocatalytic activity and the ethylene-removal capacity were determined, evaluating the effects of time and the type of light irradiation. With respect to the analysis of TiO2 nanoparticles, the whole samples had an anatase structure. According to the photocatalytic activity, nanoparticles of 21 nm showed the highest activity against ethylene (~73%). The results also showed significant differences in ethylene-removal activity when comparing particle size and type and radiation time. Thus, 21 nm nano-TiO2 was used to produce nanocomposites through the melt-extrusion process to simulate industrial processing conditions. With respect to the nanocomposites' ethylene-removing properties, there were significant differences between TiO2 concentrations, with samples with 5% of active showed the highest activity (~57%). The results obtained are promising and new studies are needed to focus on changes in material format and the evaluation in ethylene-sensitive fruits.
RESUMEN
Incorporating carotenoids into sodium alginate films can give them functional properties for food packaging applications. The lycopene and ß-carotene were included in the biopolymer matrix at 0.1%, 0.3%, and 0.5% (g carotenoid/g polymer). There was no significant difference (p > 0.05) in film thickness (45 ± 1â µm) of sodium alginate films with carotenoids. Nevertheless, the low quantity of carotenoids was enough to promote significant variations in the tensile properties of films. The films with lycopene or ß-carotene showed lower tensile strength and elongation at break than control films. The carotenoid incorporation promoted a reduction (p < 0.05) in water vapor permeability, mainly by adding 0.5%. In the same way, it improved the light transmission and thermal stability of films and did not affect the water solubility of films. The scanning electron microscopy of films showed a homogeneous surface, but the films with lycopene or ß-carotene showed a more compact structure than the control film. The sodium alginate films incorporated with 0.3% lycopene or ß-carotene showed a remarkable protective effect on sunflower oil against oxidation compared with traditional commercial plastic packaging under accelerated storage conditions (heat and light). Therefore, they can be considered a potential material for food packaging purposes.
RESUMEN
One of the main causes of food spoilage is the lipid oxidation of its components, which generates the loss of nutrients and color, together with the invasion of pathogenic microorganisms. In order to minimize these effects, active packaging has played an important role in preservation in recent years. Therefore, in the present study, an active packaging film was developed using polylactic acid (PLA) and silicon dioxide (SiO2) nanoparticles (NPs) (0.1% w/w) chemically modified with cinnamon essential oil (CEO). For the modification of the NPs, two methods (M1 and M2) were tested, and their effects on the chemical, mechanical, and physical properties of the polymer matrix were evaluated. The results showed that CEO conferred to SiO2 NPs had a high percentage of 2,2-diphenyl-l-picrylhydrazyl (DPPH) free radical inhibition (>70%), cell viability (>80%), and strong inhibition to E. coli, at 45 and 11 µg/mL for M1 and M2, respectively, and thermal stability. Films were prepared with these NPs, and characterizations and evaluations on apple storage were performed for 21 days. The results show that the films with pristine SiO2 improved tensile strength (28.06 MPa), as well as Young's modulus (0.368 MPa) since PLA films only presented values of 27.06 MPa and 0.324 MPa, respectively; however, films with modified NPs decreased tensile strength values (26.22 and 25.13 MPa), but increased elongation at break (from 5.05% to 10.32-8.32%). The water solubility decreased from 15% to 6-8% for the films with NPs, as well as the contact angle, from 90.21° to 73° for the M2 film. The water vapor permeability increased for the M2 film, presenting a value of 9.50 × 10-8 g Pa-1 h-1 m-2. FTIR analysis indicated that the addition of NPs with and without CEO did not modify the molecular structure of pure PLA; however, DSC analysis indicated that the crystallinity of the films was improved. The packaging prepared with M1 (without Tween 80) showed good results at the end of storage: lower values in color difference (5.59), organic acid degradation (0.042), weight loss (24.24%), and pH (4.02), making CEO-SiO2 a good component to produce active packaging.
RESUMEN
The efficiency in the capabilities to store and release antioxidants depends on the film morphology and its manufacturing process, as well as on the type and methodology used to obtain the polyphenol extracts. Here, hydroalcoholic extracts of black tea polyphenols (BT) were obtained and dropped onto different polyvinyl alcohol (PVA) aqueous solutions (water or BT aqueous extract with and without citric acid, CA) to obtain three unusual PVA electrospun mats containing polyphenol nanoparticles within their nanofibers. It was shown that the mat obtained through the nanoparticles precipitated in BT aqueous extract PVA solution presented the highest total polyphenol content and antioxidant activity, and that the addition of CA as an esterifier or PVA crosslinker interfered with the polyphenols. The release kinetics in different food simulants (hydrophilic, lipophilic and acidic) were fitted using Fick's diffusion law and Peppas' and Weibull's models, showing that polymer chain relaxation is the main mechanism in all food simulants except for the acidic, which presented an abrupt release by Fick's diffusion mechanism of about 60% before being controlled. This research provides a strategy for the development of promising controlled-release materials for active food packaging, mainly for hydrophilic and acidic food products.
RESUMEN
In this study, the antioxidant, antimicrobial, mechanical, optical, and barrier attributes of Solanum lycocarpum starch bio-based edible films incorporated with a phenolic extract from jaboticaba peel were investigated. Aiming to determine the effect of the polymers and the phenolic extract on the properties of the films, a three-factor simplex-lattice design was employed, and the formulation optimization was based on the produced films' antioxidant potential. The optimized formulation of the starch-PEJP film showed a reddish-pink color with no cracks or bubbles and 91% antioxidant activity against DPPH radical. The optimized starch-PEJP film showed good transparency properties and a potent UV-blocking action, presenting color variation as a function of the pH values. The optimized film was also considerably resistant and highly flexible, showing a water vapor permeability of 3.28 × 10-6 g m-1 h-1 Pa-1. The microbial permeation test and antimicrobial evaluation demonstrated that the optimized starch-PEJP film avoided microbial contamination and was potent in reducing the growth of Escherichia coli, Staphylococcus aureus, and Salmonella spp. In summary, the active starch-PEJP film showed great potential as an environmentally friendly and halochromic material, presenting antioxidant and antimicrobial properties and high UV-protecting activity.
RESUMEN
The aim of this work is to produce bioactive films suitable for aerobic packaging applications by combining the bioactivity of Spirulina platensis protein concentrate (PC; 1% and 2% w/w), the sustainable nature of bovine gelatin (Ge), and sodium alginate dialdehyde (ADA, 5% w/w) as Schiff base crosslinking agent. PC was obtained by an optimized acid-base extraction process and characterized. PC showed a dose-dependent radical scavenging activity (RSA; IC50 = 24.3 mg/L) related to its high content of C-phycocyanin and total phenolic compounds (32.44 ± 1.37 mg gallic acid equivalents per gram of PC). As a general trend, crosslinking decreased the water solubility, improved mechanical properties, and helped improve RSA of Ge-ADA-PC films. Ge-5ADA-2PC film recorded best compromise between solubility (only 33.6%), high UV barrier (0.134% transmittance at 400 nm), reasonable extensibility (217.00 ± 2.34%), tensile strength (3.50 ± 0.43 MPa), water vapor permeability (2.00 ± 0.17 × 10-12 kg·m/m2 ·Pa·s), and RSA (44.70 ± 2.19%). Wrapping hake fillets in this filmdelayed lipid oxidation during storage under refrigerated conditions for 11 days, maintaining the thiobarbituric acid index below 0.5 mg malonaldehyde/kg muscle. Results suggest that Ge-ADA-PC films have potential as aerobic packaging materials for oxidation-sensitive food. PRACTICAL APPLICATION: The combination of gelatin, alginate dialdehyde and Spirulina platensis protein concentrate gave rise to fully biobased films with reduced water solubility and enhanced antioxidant activity, which were able to delay the secondary lipid oxidation of refrigerated seafood. This study also shows the potential of cyanobacteria as renewable resources of high-value ingredients for the design of active and intelligent aerobic packaging solutions.
Asunto(s)
Antioxidantes , Embalaje de Alimentos , Animales , Bovinos , Embalaje de Alimentos/métodos , Gelatina , Bases de Schiff , Permeabilidad , LípidosRESUMEN
The use of active packaging to reduce food waste has been a very effective alternative. An eminent concern is the use of plastic materials of petroleum origin and toxic additives in the processing of these packages. Thus, the focus on the use of biodegradable and natural raw materials that minimize waste generation and promote greater consumer safety has been preferable. The objective of the research was to investigate the effects of turmeric essential oil (TEO) on corn starch and pectin extract films manufactured by solution casting method. The antioxidant and antimicrobial potential of the oil was confirmed by the tests: antimicrobial diffusion disk, determination of the content of phenolic compounds and antioxidant activity by the DPPH and FRAP method. The chromatographic analysis confirmed the presence of active chemical constituents such as Turmerone, Ar-Turmerone and ß-Turmerone. The results showed that the oil promoted a change in the color of the films, increased mechanical strength and reduced flexibility, keeping transparency, solubility, WVP and thermal stability unchanged. In the direct application test of the film as packaging for sliced bread, no visible contamination was detected during the nine weeks of analysis. Therefore, the active film with 3 % TEO was shown to be a viable solution for manufacturing biodegradable and safe active films that can be applied as food packaging.
Asunto(s)
Antiinfecciosos , Aceites Volátiles , Eliminación de Residuos , Aceites Volátiles/química , Pectinas/química , Zea mays/química , Almidón/química , Pan , Curcuma , Permeabilidad , Antiinfecciosos/farmacología , Antiinfecciosos/química , Embalaje de Alimentos/métodosRESUMEN
This study evaluated the influence of O2-absorbing sachets into different packages polyethylene terephthalate (PET - E1), low density polyethylene (LDPE - E2), and PET/LDPE (E3) on the quality of minimally processed soybean sprouts (MP-sprouts). The MP-sprouts were stored up to 12 days and characterized for physicochemical, microbiological and sensory attributes. The O2-absorbing sachet showed changes during exposure to the environment by the formation of amorphous iron hydroxide, which was observed by the analysis of functional groups and XRD. The packaging used in the study showed high transmittance and clarity, and low Haze, being a good feature for storing the MP product. All packaging systems showed an increase in the volume of absorbed oxygen (cm3) up to 9 days of storage. The physic-chemical characteristics of the MP-sprouts stored for 12 days were preserved in the different packages, showing no difference regarding the use of the O2-absorbing sachet. The O2-absorbing sachet not influenced the quality of MP-sprouts during the stored (12 days). The best visual aspect was observed in PET package (with and without O2-absorbing sachet) being classified as excellent, without color change. The MP-sprouts also fulfilled the microbiological quality standards and presented 75.11% acceptability and 72.40% purchase intention.
Asunto(s)
Embalaje de Alimentos , Conservación de Alimentos , Embalaje de Alimentos/métodos , Conservación de Alimentos/métodos , Glycine max , Polietileno , OxígenoRESUMEN
Nowadays, there is a worldwide demand in the production of innovative packaging that release active compounds to increase the shelf life of perishable food products. Therefore, this study produced methylcellulose films functionalized with poly-ε-caprolactone nanocapsules entrapped ß-carotene. The nanoparticles were produced by the nanoprecipitation method, and 10, 30, and 50 % of nanoparticles colloidal solution was added in the methylcellulose filmogenic solution. The films were characterized by the mechanical, physicochemical properties, antioxidant activity, and release of ß-carotene from the polymeric matrix to a food simulant. The results demonstrated satisfactory mechanical properties; however, the addition of nanoparticles decreased the Young's Modulus and increased the elongation at break. Regarding light transmission, the incorporation of ß-carotene nanoparticles promoted a decrease in the percentage of ultraviolet ray's transmittance through the film matrix, as well as visible light. The incorporation of nanoparticles improved the antioxidant activity of the films, which was proportional to the concentration of ß-carotene used in the formulation. The release of ß-carotene reached a maximum value of 10.93 µg g-1 film containing 70 % nanoparticles, which was a desired profile for food application. Finally, the methylcellulose films functionalized with poly-ε-caprolactone nanocapsules can release ß-carotene, and therefore, can be considered as a novel nanomaterial for food conservation, with a potential to increase the shelf life of perishable food products.