RESUMEN

CONSPECTUS: In a conventional photovoltaic device (solar cell or photodiode) photons are absorbed in a bulk semiconductor layer, leading to excitation of an electron from a valence band to a conduction band. Directly after photoexcitation, the hole in the valence band and the electron in the conduction band have excess energy given by the difference between the photon energy and the semiconductor band gap. In a bulk semiconductor, the initially hot charges rapidly lose their excess energy as heat. This heat loss is the main reason that the theoretical efficiency of a conventional solar cell is limited to the Shockley-Queisser limit of ∼33%. The efficiency of a photovoltaic device can be increased if the excess energy is utilized to excite additional electrons across the band gap. A sufficiently hot charge can produce an electron-hole pair by Coulomb scattering on a valence electron. This process of carrier multiplication (CM) leads to formation of two or more electron-hole pairs for the absorption of one photon. In bulk semiconductors such as silicon, the energetic threshold for CM is too high to be of practical use. However, CM in nanometer sized semiconductor quantum dots (QDs) offers prospects for exploitation in photovoltaics. CM leads to formation of two or more electron-hole pairs that are initially in close proximity. For photovoltaic applications, these charges must escape from recombination. This Account outlines our recent progress in the generation of free mobile charges that result from CM in QDs. Studies of charge carrier photogeneration and mobility were carried out using (ultrafast) time-resolved laser techniques with optical or ac conductivity detection. We found that charges can be extracted from photoexcited PbS QDs by bringing them into contact with organic electron and hole accepting materials. However, charge localization on the QD produces a strong Coulomb attraction to its counter charge in the organic material. This limits the production of free charges that can contribute to the photocurrent in a device. We show that free mobile charges can be efficiently produced via CM in solids of strongly coupled PbSe QDs. Strong electronic coupling between the QDs resulted in a charge carrier mobility of the order of 1 cm(2) V(-1) s(-1). This mobility is sufficiently high so that virtually all electron-hole pairs escape from recombination. The impact of temperature on the CM efficiency in PbSe QD solids was also studied. We inferred that temperature has no observable effect on the rate of cooling of hot charges nor on the CM rate. We conclude that exploitation of CM requires that charges have sufficiently high mobility to escape from recombination. The contribution of CM to the efficiency of photovoltaic devices can be further enhanced by an increase of the CM efficiency above the energetic threshold of twice the band gap. For large-scale applications in photovoltaic devices, it is important to develop abundant and nontoxic materials that exhibit efficient CM.

RESUMEN

Carrier multiplication, the generation of multiple electron-hole pairs by a single photon, is of great interest for solar cells as it may enhance their photocurrent. This process has been shown to occur efficiently in colloidal quantum dots, however, harvesting of the generated multiple charges has proved difficult. Here we show that by tuning the charge-carrier mobility in quantum-dot films, carrier multiplication can be optimized and may show an efficiency as high as in colloidal dispersion. Our results are explained quantitatively by the competition between dissociation of multiple electron-hole pairs and Auger recombination. Above a mobility of ~1 cm(2) V(-1) s(-1), all charges escape Auger recombination and are quantitatively converted to free charges, offering the prospect of cheap quantum-dot solar cells with efficiencies in excess of the Shockley-Queisser limit. In addition, we show that the threshold energy for carrier multiplication is reduced to twice the band gap of the quantum dots.

RESUMEN

Carrier multiplication-the generation of multiple electron-hole pairs by a single photon-is currently of great interest for the development of highly efficient photovoltaics. We study the effects of infilling PbSe quantum-dot solids with metal oxides by atomic layer deposition on carrier multiplication. Using time-resolved microwave conductivity measurements, we find, for the first time, that carrier multiplication occurs in 1,2-ethanedithiol-linked PbSe quantum-dot solids infilled with Al2O3 or Al2O3/ZnO, while it is negligible or absent in noninfilled films. The carrier-multiplication efficiency of the infilled quantum-dot solids is close to that of solution-dispersed PbSe quantum dots, and not significantly limited by Auger recombination.

RESUMEN

Organic semiconductors are of great interest for application in cheap and flexible solar cells. They have a typical absorption onset in the visible. Infrared light can be harvested by use of lead-chalcogenide quantum dot sensitizers. However, bulk-heterojunction solar cells with quantum-dot sensitizers are inefficient. Here we use ultrafast transient absorption and time-domain terahertz spectroscopy to show that charge localization on the quantum dot leads to enhanced coulomb attraction of its counter charge in the organic semiconductor. This localization-enhanced coulomb attraction is the fundamental cause of the poor efficiency of these photovoltaic architectures. It is of prime importance for improving solar cell efficiency to directly photogenerate spatially separated charges. This can be achieved when both charges are delocalized. Our findings provide a rationalization in the development of photovoltaic architectures that exploit quantum dots to harvest the near-infrared part of the solar spectrum more efficiently.

Asunto(s)

RESUMEN

Using femtosecond transient absorption spectroscopy, we demonstrate that lead chalcogenide nanocrystals show considerable photoinduced absorption (PA) in a broad wavelength range just below the band gap. The time-dependent decay of the PA signal correlates with the recovery of the band gap absorption, indicating that the same carriers are involved. On this basis, we assign this PA signal to intraband absorption, that is, the excitation of photogenerated carriers from the bottom of the conduction band or the top of the valence band to higher energy levels in the conduction and valence band continuum. We confirm our experiments with tight-binding calculations. This broadband response in the commercially interesting near- to mid-infrared range is very relevant for ultra-high-speed all-optical signal processing. We benchmark the performance with bulk Si and Si nanocrystals.