RESUMEN

Green hydrogen (H2) is an essential component of global plans to reduce carbon emissions from hard-to-abate industries and heavy transport. However, challenges remain in the highly efficient H2 production from water electrolysis powered by renewable energies. The sluggish oxygen evolution restrains the H2 production from water splitting. Rational electrocatalyst designs for highly efficient H2 production and oxygen evolution are pivotal for water electrolysis. With the development of high-performance electrolyzers, the scale-up of H2 production to an industrial-level related activity can be achieved. This review summarizes recent advances in water electrolysis such as the proton exchange membrane water electrolyzer (PEMWE) and anion exchange membrane water electrolyzer (AEMWE). The critical challenges for PEMWE and AEMWE are the high cost of noble-metal catalysts and their durability, respectively. This review highlights the anode and cathode designs for improving the catalytic performance of electrocatalysts, the electrolyte and membrane engineering for membrane electrode assembly (MEA) optimizations, and stack systems for the most promising electrolyzers in water electrolysis. Besides, the advantages of integrating water electrolyzers, fuel cells (FC), and regenerative fuel cells (RFC) into the hydrogen ecosystem are introduced. Finally, the perspective of electrolyzer designs with superior performance is presented.

RESUMEN

Electrochemical urea oxidation reaction (UOR) offers a promising alternative to the oxygen evolution reaction (OER) in clean energy conversion and storage systems. Nickel-based catalysts are highly regarded as promising electrocatalysts for the UOR. However, their effectiveness is significantly hindered by the unavoidable self-oxidation reaction of nickel species during UOR. To address this challenge, we proposed an interface chemistry modulation strategy to boost UOR kinetics by creating a high-energy interfacial heterostructure. This heterostructure features the incorporation of Ag at the CoOOH@NiOOH heterojunction interface. Strong interactions significantly promote the electron exchanges in the heterointerface between the -OH and -O. Consequently, the improved electron delocalization led to the formation of stronger bonds between Co sites and urea CO(NH2)2, promoting a preference for urea to occupy Co active sites over OH*. The resulting catalyst, Ag-CoOOH@NiOOH, affords an ultrahigh UOR activity with a low potential of 1.33 V at 100 mA cm-2. The fabricated catalyst exhibits a mass activity exceeding that of initial cobalt oxyhydroxide by over 11.9 times. The rechargeable urea-assisted zinc-air batteries (ZABs) achieves a record-breaking energy efficiency of 74.56% at 1 mA cm-2, remarkable durability (1000 hours at even a current density of 50 mA cm-2), and quick charge performances.

RESUMEN

Designing highly active and cost-effective electrocatalysts for the alkaline hydrogen oxidation reaction (HOR) is critical for advancing anion-exchange membrane fuel cells (AEMFCs). While dilute metal alloys have demonstrated substantial potential in enhancing alkaline HOR performance, there has been limited exploration in terms of rational design, controllable synthesis, and mechanism study. Herein, we developed a series of dilute Pd-Ni alloys, denoted as x% Pd-Ni, based on a trace-Pd decorated Ni-based coordination polymer through a facile low-temperature pyrolysis approach. The x% Pd-Ni alloys exhibit efficient electrocatalytic activity for HOR in alkaline media. Notably, the optimal 0.5% Pd-Ni catalyst demonstrates high intrinsic activity with an exchange current density of 0.055 mA cm-2, surpassing that of many other alkaline HOR catalysts. The mechanism study reveals that the strong synergy between Pd single atoms (SAs)/Pd dimer and Ni substrate can modulate the binding strength of proton (H)/hydroxyl (OH), thereby significantly reducing the activation energy barrier of a decisive reaction step. This work offers new insights into designing advanced dilute metal or single-atom-alloys (SAAs) for alkaline HOR and potentially other energy conversion processes.

RESUMEN

Inert atmosphere is normally necessary for fabrication of solid composite electrolytes (SCEs) as a crucial part of solid-state Li-metal batteries in order to avoid undesirable reactions induced by ambient moisture. Herein, we developed an air-processable technique to fabricate SCEs by employing LiCF3SO3 (LiOTf) as the Li salt, which was combined with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) as the fast Li-conductor and polyvinylidene difluoroethylene/polyvinyl acetate (PVDF/PVAC) as the polymer matrix. With the assistance of trace H2O dissolved in electrolyte solution, the room-temperature Li+ conductivity of the obtained aSCE reached as high as 5.09 × 10-4 S cm-1, which was over 3 orders of magnitude higher than that of the one (iSCE, 1.93 × 10-7 S cm-1) cast by the electrolyte solution prepared in an inert atmosphere. The theoretical calculation results reveal that the oxygen atom of H2O exhibits a high propensity to interact with the Li atom in LiOTf (Li···O), thereby establishing a hydrogen bond with the oxygen atom (H···O) in N,N-dimethylformamide (solvent). Such interactions promoted the dissociation of LiOTf and led to the formation of uniform Li+ transportation channels. Simultaneously, the composition distribution was also altered, resulting in a smoother surface of aSCE and lowered crystallinity of PVDF. On this basis, the LiOTf/LLZTO/PVDF/PVAC solution at 60 °C was directly coated onto the surface of the LiFePO4 (LFP) cathode to fabricate the LFP-aSCE film after drying in an oven. The assembled LFP-aSCE/Li battery wetted by trace sulfolane exhibited an initial Coulombic efficiency of 94.7% and a capacity retention rate of up to 96% at 0.2 C (137 mAh g-1) after 180 cycles and a high capacity of 143.7 mAh g-1 at 0.5 C (150 cycles). Overall, this work could pave the way for the facile fabrication of solid electrolytes.

RESUMEN

Regulating the local configuration of atomically dispersed transition-metal atom catalysts is the key to oxygen electrocatalysis performance enhancement. Unlike the previously reported single-atom or dual-atom configurations, we designed a new type of binary-atom catalyst, through engineering Fe-N4 electronic structure with adjacent Co-N2C2 and nitrogen-coordinated Co nanoclusters, as oxygen electrocatalysts. The resultant optimized electronic structure of the Fe-N4 active center favors the binding capability of intermediates and enhances oxygen reduction reaction (ORR) activity in both alkaline and acid conditions. In addition, anchoring M-N-C atomic sites on highly graphitized carbon supports guarantees of efficient charge- and mass-transports, and escorts the high bifunctional catalytic activity of the entire catalyst. Further, through the combination of electrochemical studies and in-situ X-ray absorption spectroscopy analyses, the ORR degradation mechanisms under highly oxidative conditions during oxygen evolution reaction processes were revealed. This work developed a new binary-atom catalyst and systematically investigates the effect of highly oxidative environments on ORR electrochemical behavior. It demonstrates the strategy for facilitating oxygen electrocatalytic activity and stability of the atomically dispersed M-N-C catalysts.

RESUMEN

Birds are sensitive to environmental pollution and lead (Pb) contamination could negatively affect nearly all avian organs and systems including kidney of excretive system. Thereby, we used a biological model species-Japanese quail (Coturnix japonica) to examine the nephrotoxic effects of Pb exposure and possible toxic mechanism of Pb on birds. Quail chicks of 7-day-old were exposed to 50 ppm Pb of low dose and high dose of 500 ppm and 1000 ppm Pb in drinking water for five weeks. The results showed that Pb exposure induced kidney weight increase while body weight and length reduction. The increase of uric acid (UA), creatinine (CREA) and cystatin c (Cys C) in the plasma suggested renal dysfunction. Moreover, both microstructural and ultrastructural changes demonstrated obvious kidney damages. In particular, renal tubule epithelial cells and glomeruli swelling indicated renal inflammation. Furthermore, changes in the content and activity of oxidative stress markers suggested that Pb caused excessive oxidative stress in the kidney. Pb exposure also induced abnormal apoptosis in the kidney. In addition, RNA sequencing (RNA-Seq) analysis revealed that Pb disturbed molecular pathways and signaling related with renal function. Especially, Pb exposure resulted in an increase in renal uric acid synthesis by disrupting purine metabolism. Pb caused apoptotic increment by inhibiting the phosphatidylinositol-3-kinase (PI3K)/RAC-alpha serine/threonine-protein kinase (AKT) pathway and induced aggravated inflammation by activating Nuclear Factor kappa B (NF-κB) signaling pathway. The study implied that Pb caused nephrotoxicity through structural damages, uric acid metabolism disorder, oxidation imbalance, apoptosis and inflammatory pathway activation.

Asunto(s)

RESUMEN

AIM: The diagnosis of alcoholic liver disease (ALD) is still a great challenge. Therefore, the purpose of this study is to identify and characterize new metabolomic biomarkers for the diagnosis and staging of ALD. METHODS: A total of 127 patients with early liver injury, 40 patients with alcoholic cirrhosis (ALC) and 40 healthy controls were included in this study. Patients with early liver injury included 45 patients with alcoholic liver disease (ALD), 40 patients with non-alcoholic fatty liver disease (NAFLD) and 40 patients with viral liver disease (VLD). The differential metabolites in serum samples were analyzed using ultra-high-performance liquid chromatography-quadrupole/time-of-flight mass spectrometry, and partial metabolites in the differential metabolic pathway were identified by liquid chromatography- tandem mass spectrometry. RESULTS: A total of 40 differential metabolites and five differential metabolic pathways in the four groups of patients with early liver disease and healthy controls were found, and the metabolic pathway of primary bile acid (BA) biosynthesis was the pathway that included the most differential metabolites. Therefore, 22 BA profiles were detected. The results revealed that the changes of BA profiles were most pronounced in patients with ALD compared with patients with NAFLD and VLD, in whom 12 differential BAs were diagnostic markers of ALD (AUC = 0.883). The 19 differential BAs in ALC and ALD were diagnostic markers of the stage of alcoholic hepatic fibrosis (AUC = 0.868). CONCLUSION: BA profiles are potential indicators in the diagnosis of ALD and evaluation of different stages.

Asunto(s)

RESUMEN

High-performance electrocatalysts are critical to support emerging electrochemical energy storage and conversion technologies. Graphite-derived materials, including fullerenes, carbon nanotubes, and graphene, have been recognized as promising electrocatalysts and electrocatalyst supports for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and carbon dioxide reduction reaction (CO2RR). Effective modification/functionalization of graphite-derived materials can promote higher electrocatalytic activity, stability, and durability. In this review, the mechanisms and evaluation parameters for the above-outlined electrochemical reactions are introduced first. Then, we emphasize the preparation methods for graphite-derived materials and modification strategies. We further highlight the importance of the structural changes of modified graphite-derived materials on electrocatalytic activity and stability. Finally, future directions and perspectives towards new and better graphite-derived materials are presented.

RESUMEN

The TDM of voriconazole which exhibits wide inter-individual variability is indispensable for treatment in clinic. In this study, a method that high-performance liquid chromatography tandem mass spectrometry cubed (HPLC-MS3) is first built and validated to quantify voriconazole in human plasma. The system is composed of Shimadzu Exion LCTM UPLC coupled with a Qtrap 5500 mass spectrometer. The separation of voriconazole is performed on a Poroshell 120 SB-C18 column at a flow rate of 0.8 mL/min remaining 7 min for each sample. The calibration curves are linear in the concentration range of 0.25-20 µg/mL. Intra-day and inter-day accuracies and precisions are within 8.0% at three concentrations, and the recoveries and matrix effect are all within accepted limits. In terms of stability, there is no significant degradation of voriconazole under various conditions. The HPLC-MS3 and HPLC-MRM (multiple reaction monitoring) methods are compared in 42 patients with Passing-Bablok regression and Bland-Altman plots, and the results show no significant difference between the two methods. However, HPLC-MS3 has a higher S/N (signal-to-noise ratio) and response than the MRM. Finally, the HPLC-MS3 assay is successfully applied to monitor the TDM (therapeutic drug monitoring) of voriconazole in human plasma, and this verifies that the dosing guidelines for voriconazole have been well implemented in the clinic and patients have received excellent treatment.

Asunto(s)

RESUMEN

Three kinds of Pt anchoring on heteroatom-doped graphene were synthesised and their effects on catalytic performance were discussed. The introduction of N and P into graphene is helpful to decrease the Pt particle size with a homogeneous distribution and favor the electronic configuration for the ORR.

RESUMEN

HIGHLIGHTS: Three-dimensional (3D) core-shell heterostructured NixSy@MnOxHy nanorods grown on nickel foam (NixSy@MnOxHy/NF) were successfully fabricated via a simple hydrothermal reaction and a subsequent electrodeposition process. The fabricated NixSy@MnOxHy/NF shows outstanding bifunctional activity and stability for hydrogen evolution reaction and oxygen evolution reaction, as well as overall-water-splitting performance. The main origins are the interface engineering of NixSy@MnOxHy, the shell-protection characteristic of MnOxHy, and the 3D open nanorod structure, which remarkably endow the electrocatalyst with high activity and stability. Exploring highly active and stable transition metal-based bifunctional electrocatalysts has recently attracted extensive research interests for achieving high inherent activity, abundant exposed active sites, rapid mass transfer, and strong structure stability for overall water splitting. Herein, an interface engineering coupled with shell-protection strategy was applied to construct three-dimensional (3D) core-shell NixSy@MnOxHy heterostructure nanorods grown on nickel foam (NixSy@MnOxHy/NF) as a bifunctional electrocatalyst. NixSy@MnOxHy/NF was synthesized via a facile hydrothermal reaction followed by an electrodeposition process. The X-ray absorption fine structure spectra reveal that abundant Mn-S bonds connect the heterostructure interfaces of NixSy@MnOxHy, leading to a strong electronic interaction, which improves the intrinsic activities of hydrogen evolution reaction and oxygen evolution reaction (OER). Besides, as an efficient protective shell, the MnOxHy dramatically inhibits the electrochemical corrosion of the electrocatalyst at high current densities, which remarkably enhances the stability at high potentials. Furthermore, the 3D nanorod structure not only exposes enriched active sites, but also accelerates the electrolyte diffusion and bubble desorption. Therefore, NixSy@MnOxHy/NF exhibits exceptional bifunctional activity and stability for overall water splitting, with low overpotentials of 326 and 356 mV for OER at 100 and 500 mA cm-2, respectively, along with high stability of 150 h at 100 mA cm-2. Furthermore, for overall water splitting, it presents a low cell voltage of 1.529 V at 10 mA cm-2, accompanied by excellent stability at 100 mA cm-2 for 100 h. This work sheds a light on exploring highly active and stable bifunctional electrocatalysts by the interface engineering coupled with shell-protection strategy.

RESUMEN

Bupleuri Radix is the dry root of certain species of the genus Bupleurum and is commonly used in traditional Chinese medicine. The increasing global demand for Bupleuri Radix cannot be fulfilled with wild populations only. Therefore, cultivated Bupleurum is now the main commercial source of this medicinal product. Different species of Bupleurum show different medicinal properties and clinical effects, making reliable authentication and assignment of correct botanical origin for medicinal species critical. However, accurate identification of the cultivated Bupleurum species is difficult due to dramatic morphological variations resulting from cultivation. In this study, we sampled 56 cultivated Bupleurum populations of six different morphotypes (Types A-F) from the main production areas of China, and 10 wild populations of four species were used as reference materials. Conventional DNA barcoding was conducted to identify cultivated Bupleurum species. Additionally, verification based on complete chloroplast genomes was performed and new chloroplast markers were developed and evaluated. The combination of these methods resulted in the successful identification of all cultivated Bupleurum individuals. Three chloroplast regions are recommended as additional barcodes for the genus: ycf4_cemA, psaJ_rpl33, and ndhE_ndhG. This is a reliable and promising strategy that can be applied to the authentication of natural products and the identification of other medicinal plant species with similar taxonomic problems.

Asunto(s)

RESUMEN

The extensive use of the broad-spectrum antibiotics like oxytetracycline (OTC) has become a serious environmental issue globally. OTC has profound negative effects on aquatic organisms including fishes. In this study, RNA-Seq analysis was employed to examine the possible molecular mechanism of hepatotoxicology in zebrafish induced by OTC exposure. Adult male zebrafish was exposed to 0, 5, 90, and 450 µg/L OTC for 3 weeks. The results showed the decrease in body weight and tail length but the increase in total length of zebrafish under OTC exposure in a dose-dependent way. In addition, severe histopathological damages were featured by increasing tissue vacuolization in the livers of 450 µg/L OTC group. Moreover, RNA-Seq analysis revealed that molecular signaling and functional pathways in the liver were disrupted by OTC exposure. Furthermore, the down-regulation of gene expression after OTC exposure was found on both the genes related to fatty acid degradation and the genes related to lipid synthesis. The present study implied that OTC induced liver malfunction and fish health risks through growth retard, histopathological damages, molecular signaling disruption, genetic expression alteration, and lipid metabolism disturbance.

Asunto(s)

RESUMEN

Developing cheap and earth-abundant electrocatalysts with high activity and stability for oxygen reduction reactions (ORRs) is highly desired for the commercial implementation of fuel cells and metal-air batteries. Tremendous efforts have been made on doped-graphene catalysts. However, the progress of phosphorus-doped graphene (P-graphene) for ORRs has rarely been summarized until now. This review focuses on the recent development of P-graphene-based materials, including the various synthesis methods, ORR performance, and ORR mechanism. The applications of single phosphorus atom-doped graphene, phosphorus, nitrogen-codoped graphene (P, N-graphene), as well as phosphorus, multi-atoms codoped graphene (P, X-graphene) as catalysts, supporting materials, and coating materials for ORR are discussed thoroughly. Additionally, the current issues and perspectives for the development of P-graphene materials are proposed.

RESUMEN

We use computational materials methods to study the sequential appearance of zinc-based zeolitic imidazolate frameworks (ZIFs) generated in the mechanochemical conversion process. We consider nine ZIF topologies, namely RHO, ANA, QTZ, SOD, KAT, DIA, NEB, CAG and GIS, combined with the two ligands 2-methylimidazolate and 2-ethylimidazolate. Of the 18 combinations obtained, only six (three for each ligand) were actually observed during the mechanosynthesis process. Energy and porosity calculations based on density functional theory, in combination with the Ostwald rule of stages, were found to be insufficient to distinguish the experimentally observed ZIFs. We then show, using classical molecular dynamics, that only ZIFs withstanding quasi-hydrostatic pressure P ≥ 0.3 GPa without being destroyed were observed in the laboratory. This finding, along with the requirement that successive ZIFs be generated with decreasing porosity and/or energy, provides heuristic rules for predicting the sequences of mechanically generated ZIFs for the two ligands considered.

Asunto(s)

RESUMEN

High-performance oxygen electrocatalysts play a key role in the widespread application of rechargeable Zn-air batteries (ZABs). Single-atom catalysts (SACs) with maximum atom efficiency and well-defined active sites have been recognized as promising alternatives of the present noble-metal-based catalysts for oxygen reduction reaction and oxygen evolution reaction. To improve their oxygen electrocatalysis activities and reveal the structure-activity relationship, many advanced synthesis and characterization methods have been developed to study the effects of 1) coordination and electronic structure of the metal centers and 2) morphology and stability of the conductive substrates. Herein, a detailed review of the recent advances of SACs with strong electronic metal-support interaction (EMSI) for rechargeable ZABs is provided. Great emphasis was placed on the EMSI forms and design strategies. Moreover, the importance and the impact of the atomic coordinating structure and the substrates on the oxygen electrocatalytic activity and stability are highlighted. Finally, future directions and perspectives on the development of SACs are also presented.

RESUMEN

Exploring highly active and stable bifunctional water-splitting electrocatalysts at ultra-high current densities is remarkably desirable. Herein, 3D nickel-iron phosphides nanosheets modified by MnOx nanoparticles are grown on nickel foam (MnOx /NiFeP/NF). Resulting from the electronic coupling effect enabled by interface modifications, the intrinsic activities of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are improved. Meanwhile, 3D nanosheets provide abundant active sites for HER and OER, leading to accelerating the reaction kinetics. Besides, the shell-protection characteristic of MnOx improves the durability of MnOx /NiFeP/NF. Therefore, MnOx /NiFeP/NF shows exceptional bifunctional electrocatalytic activities toward HER (an overpotential of 255 mV at 500 mA cm-2 ), OER (overpotentials of 296 and 346 mV at 500 and 1000 mA cm-2 , respectively), and overall water splitting (cell voltages of 1.796 and 1.828 V at 500 and 1000 mA cm-2 , respectively). Furthermore, it owns remarkably outstanding stability for overall water splitting at ultra-high current densities (120 and 70 h at 500 and 1000 mA cm-2 , respectively), which outperforms almost all of the non-noble metal electrocatalysts. This work presents efficient strategies of interface modifications, 3D nanostructures, and shell protection to afford ultra-high current densities.

RESUMEN

Rechargeable zinc-air batteries (ZABs) have attracted much attention due to their promising capability for offering high energy density while maintaining a long operational lifetime. One of the biggest challenges in developing all-solid-state ZABs is to design suitable bifunctional air-electrodes, which can efficiently catalyze the key oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) electrochemical processes. The other one is to develop robust electrolyte membranes with high ionic conductivity and superb water retention capability. In this review, an in-depth discussion of the challenges, mechanisms, and design strategies for the defect electrocatalyst and the electrolyte membrane in all-solid-state ZABs will be offered. In particular, the crucial defect engineering strategies to tune the ORR/OER catalysts are summarized, including direct controllable strategies: 1) atomically dispersed metal sites control, 2) vacancy defects control, and 3) lattice-strain control, and the indirect strategies: 4) crystallographic structure control and 5) metal-carbon support interaction control. Moreover, the most recent progress in designing electrolyte membranes, including polyvinyl alcohol-based membranes and gel polymer electrolyte membranes, is presented. Finally, the perspectives are proposed for rational design and fabrication of the desired air electrode and electrolyte membrane to improve the performance and prolong the lifetime of all-solid-state ZABs.

RESUMEN

The discovery of durable, active, and affordable electrocatalysts for energy-related catalytic applications plays a crucial role in the advancement of energy conversion and storage technologies to achieve a sustainable energy future. Transition metal borides (TMBs), with variable compositions and structures, present a number of interesting features including coordinated electronic structures, high conductivity, abundant natural reserves, and configurable physicochemical properties. Therefore, TMBs provide a wide range of opportunities for the development of multifunctional catalysts with high performance and long durability. This review first summarizes the typical structural and electronic features of TMBs. Subsequently, the various synthetic methods used thus far to prepare nanostructured TMBs are listed. Furthermore, advances in emerging TMB-catalyzed reactions (both theoretical and experimental) are highlighted, including the hydrogen evolution reaction, the oxygen evolution reaction, the oxygen reduction reaction, the carbon dioxide reduction reaction, the nitrogen reduction reaction, the methanol oxidation reaction, and the formic acid oxidation reaction. Finally, challenges facing the development of TMB electrocatalysts are discussed, with focus on synthesis and energy-related catalytic applications, and some potential strategies/perspectives are suggested as well, which will profit the design of more efficient TMB materials for application in future energy conversion and storage devices.

RESUMEN

Rechargeable zinc-air batteries (ZABs) are currently receiving extensive attention because of their extremely high theoretical specific energy density, low manufacturing costs, and environmental friendliness. Exploring bifunctional catalysts with high activity and stability to overcome sluggish kinetics of oxygen reduction reaction and oxygen evolution reaction is critical for the development of rechargeable ZABs. Atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts possessing prominent advantages of high metal atom utilization and electrocatalytic activity are promising candidates to promote oxygen electrocatalysis. In this work, general principles for designing atomically dispersed M-N-C are reviewed. Then, strategies aiming at enhancing the bifunctional catalytic activity and stability are presented. Finally, the challenges and perspectives of M-N-C bifunctional oxygen catalysts for ZABs are outlined. It is expected that this review will provide insights into the targeted optimization of atomically dispersed M-N-C catalysts in rechargeable ZABs.