RESUMEN

This study explores the impact of oil type, surfactant concentration, and production temperature on oleofoam properties. Oleofoams were prepared using different concentrations (5, 8, and 10 % w/w) of monoglyceride (MG) in olive, soybean, and sunflower oils at temperatures of 25 °C and 5 °C. The results indicate that higher surfactant concentrations and lower production temperatures enhance the stability, foamability, melting behavior, and hardness of the oleofoams, while minimizing oil drainage. Microscopic analysis reveals that lower production temperatures result in smaller bubble sizes in all oil blends which reduces oil loss and increases the hardness of the oleofoam. Also, oleofoams derived from different oils exhibit solid-like behavior. Among the oils studied, the oleofoam prepared with sunflower oil, at a concentration of 10 % MG and a production temperature of 5 °C, demonstrates superior properties. These findings provide valuable insights into optimizing oleofoam properties by controlling the oil type, surfactant concentration, and production temperature.

RESUMEN

BACKGROUND: Oleogels can be used in the food industry to reduce the consumption of solid fat in the human diet and diminish some of the industrial-technological issues of using oil instead of fat. Regarding the structural weakness of neat monoglyceride oleogel and the waxy mouthfeel of pure carnauba wax oleogel, as a result of the high melting and crystallization points, the present study aimed to diminish these defects. RESULTS: Carnauba wax (CBW) was used as a co-gelator with distilled monoglyceride (DMG) at different weight ratios (100:0, 85:15, 70:30, 55:45, 40:60, and 0:100) (DMG: CBW) and two total gelator concentrations (50 and 100 g kg-1 ) to improve the DMG oleogel characteristics. The addition of CBW strengthened the DMG network and decreased the polymorphic transition. Thermal analysis showed just co-crystallization at the 85:15 ratio, whereas, in the other combinations, high melting components of CBW crystalized at first. As a result of the crystal homogeneity and long-time development, the oleogel properties improved at the 85:15 ratio. The low concentration of CBW and the formation of the eutectic system were efficient in the waxy mouthfeel reduction of oleogel at the 85:15 ratio in food applications. CONCLUSION: The DMG/CBW oleogel at the 85:15 ratio, with better structural and sensorial properties than DMG and CBW oleogels, respectively, has the potential for use instead of fat in food formulations. © 2023 Society of Chemical Industry.

Asunto(s)

RESUMEN

The effect of adding different fractions of extruded and non-extruded soybean hull to wheat flour at 20% and 30% and two-particle size levels (smaller and larger than 150 µm) was studied on the physicochemical, sensorial properties, and the shelf-life of high-fiber molded bread. Increasing the amount of all different fractions of the soybean hull raised the water absorption of the dough. It also increased the ash and crude fiber contents, bread crust lightness, redness and yellowness, bread crumb hardness as well as the cells number per unit area of the crumb. Moreover, it reduced the moisture content, specific volume, porosity, and overall acceptability of the pan bread. The treatments containing the fractions with larger particle sizes of the soybean hull had higher dough stability time, bread-specific volume, porosity, and lightness, as well as lower crumb hardness and moisture content, and crust redness and yellowness than the corresponding ones with finer particle sizes. The samples prepared with the extruded fractions with smaller particle sizes showed lower moisture content, hardness, porosity, and specific volume. After studying the bread staling, moisture content and overall acceptance of the samples decreased. In addition, the enthalpy in differential scanning calorimetry (DSC) and the signal intensity in x-ray diffraction (XRD) increased during storage. In many cases, the bread with the large-sized extruded fractions of soybean hull at the substitution level of 20% was the most suitable product in most of the variables studied.

RESUMEN

Background: Ready-to-use therapeutic food (RUTF) spread has been highly effective in the treatment of malnutrition in those affected by disasters since it does not require preparation and baking and has a long shelf life and sufficient energy to improve growth and weight loss. Such features may be crucial during crises such as wars and natural disasters. The present study aimed to design a high-energy and nutrient-dense RUTF formulation. Methods: Soybean flour and milk protein concentrate were used as protein sources, corn flour, and sugar were employed as carbohydrate sources, cacao butter substitute was used as the lipid source, and vitamin/mineral, beta-alanine, arginine, Nigella sativa, and sesame seeds were used as a functional food. The study was performed in accordance with the guidelines of the Institute of Medicine (IOM) and criteria for food products. Results: To design the formulation, we used carbohydrates (45% of total energy), protein (13% of total energy), fat (42% of total energy), vitamins, minerals, beta-alanine, and arginine, and 100 grams of the diet was considered to release 525 kilocalories of energy. The experimental results of food safety at the determined intervals (at the beginning and 45 and 90 days after the production) showed acceptable values. Conclusions: Since nutritional requirements are among essential human needs (especially in the management of malnutrition in crisis), it is of utmost importance to prepare RUTF products in order to meet all human nutritional needs by facilitating the easy use of these products, particularly for the prevention of malnutrition and diseases.

RESUMEN

This study aimed to obtain the optimum formulation for stabilizers in ice cream that could contest with blends presented nowadays. Thus, different mixtures of three stabilizers, i.e. basil seed gum, carboxymethyl cellulose, and guar gum, at two concentrations (0.15 % & 0.35 %) were studied using mixture design methodology. The influence of these mixtures on some properties of ice cream and the regression models for them were also determined. Generally, high ratios of basil seed gum in mixture developed the apparent viscosity of ice cream mixes and decreased the melting rate. Increasing proportion of this stabilizer as well as guar gum in the mixtures at concentration of 0.15 % enhanced the overrun of samples. Based on the optimization criteria, the most excellent combination was 84.43 % basil seed gum and 15.57 % guar gum at concentration of 0.15 %. This research proved the capability of basil seed gum as a novel stabilizer in ice cream stabilization.

RESUMEN

The influence of full-fat soy flour (FFSF) and extrusion conditions on nutritional and sensory characteristics of spaghetti was evaluated using a mixture design, in order to produce functional pasta. Addition of FFSF increases the nutritional composition significantly (P

Asunto(s)