RESUMEN

Organic contaminants are ubiquitous in the environment, with mounting evidence unequivocally connecting them to aquatic toxicity, illness, and increased mortality, underscoring their substantial impacts on ecological security and environmental health. The intricate composition of sample mixtures and uncertain physicochemical features of potential toxic substances pose challenges to identify key toxicants in environmental samples. Effect-directed analysis (EDA), establishing a connection between key toxicants found in environmental samples and associated hazards, enables the identification of toxicants that can streamline research efforts and inform management action. Nevertheless, the advancement of EDA is constrained by the following factors: inadequate extraction and fractionation of environmental samples, limited bioassay endpoints and unknown linkage to higher order impacts, limited coverage of chemical analysis (i.e., high-resolution mass spectrometry, HRMS), and lacking effective linkage between bioassays and chemical analysis. This review proposes five key advancements to enhance the efficiency of EDA in addressing these challenges: (1) multiple adsorbents for comprehensive coverage of chemical extraction, (2) high-resolution microfractionation and multidimensional fractionation for refined fractionation, (3) robust in vivo/vitro bioassays and omics, (4) high-performance configurations for HRMS analysis, and (5) chemical-, data-, and knowledge-driven approaches for streamlined toxicant identification and validation. We envision that future EDA will integrate big data and artificial intelligence based on the development of quantitative omics, cutting-edge multidimensional microfractionation, and ultraperformance MS to identify environmental hazard factors, serving for broader environmental governance.

Asunto(s)

RESUMEN

Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.

Asunto(s)

RESUMEN

Although most new biomaterials for food industry applications are labelled '100% natural fabrication' and 'chemical-free', certain compounds may migrate from those materials to the food, compromising the organoleptic characteristics and safety of the product. In this work, the degree of compound migration from dishes made with four different biomaterials: bamboo, palm leaf, wood and wheat pulp was investigated. Migration tests were carried out using three food simulants, 10% ethanol (simulant A), 3% acetic acid (simulant B), and 95% ethanol (simulant D2). Unequivocal identification of non-intentionally added substances (NIAS) is challenging even when using high-resolution mass spectrometry techniques however, a total of 25 different non-volatile compounds from the migration tests were identified and quantified using Ultra-high performance liquid chromatography coupled to ion mobility quadrupole time-of-flight mass spectrometry (UPLC-IMS-MS). In the bamboo samples three oligomers, cyclic diethylene glycol adipate, 3,6,9,16,19,22-hexaoxabicyclo[22.3.1]-octacosa-1(28),24,26-triene-2,10,15,23-tetrone and 1,4,7,14,17,20-hexaoxacyclohexacosane-8,13,21,26-tetrone exceeded the specified limits of migration.

Asunto(s)

RESUMEN

The identification of migrates from food contact materials (FCMs) is challenging due to the complex matrices and limited availability of commercial standards. The use of machine-learning-based prediction tools can help in the identification of such compounds. This study presents a workflow to identify nonvolatile migrates from FCMs based on liquid chromatography-ion mobility-high-resolution mass spectrometry together with in silico retention time (RT) and collision cross section (CCS) prediction tools. The applicability of this workflow was evaluated by screening the chemicals that migrated from polyamide (PA) spatulas. The number of candidate compounds was reduced by approximately 75% and 29% on applying RT and CCS prediction filters, respectively. A total of 95 compounds were identified in the PA spatulas of which 54 compounds were confirmed using reference standards. The development of a database containing predicted RT and CCS values of compounds related to FCMs can aid in the identification of chemicals in FCMs.

Asunto(s)

RESUMEN

The use of ion mobility separation (IMS) in conjunction with high-resolution mass spectrometry has proved to be a reliable and useful technique for the characterization of small molecules from plastic products. Collision cross-section (CCS) values derived from IMS can be used as a structural descriptor to aid compound identification. One limitation of the application of IMS to the identification of chemicals from plastics is the lack of published empirical CCS values. As such, machine learning techniques can provide an alternative approach by generating predicted CCS values. Herein, experimental CCS values for over a thousand chemicals associated with plastics were collected from the literature and used to develop an accurate CCS prediction model for extractables and leachables from plastic products. The effect of different molecular descriptors and machine learning algorithms on the model performance were assessed. A support vector machine (SVM) model, based on Chemistry Development Kit (CDK) descriptors, provided the most accurate prediction with 93.3% of CCS values for [M + H]+ adducts and 95.0% of CCS values for [M + Na]+ adducts in testing sets predicted with <5% error. Median relative errors for the CCS values of the [M + H]+ and [M + Na]+ adducts were 1.42 and 1.76%, respectively. Subsequently, CCS values for the compounds in the Chemicals associated with Plastic Packaging Database and the Food Contact Chemicals Database were predicted using the SVM model developed herein. These values were integrated in our structural elucidation workflow and applied to the identification of plastic-related chemicals in river water. False positives were reduced, and the identification confidence level was improved by the incorporation of predicted CCS values in the suspect screening workflow.

Asunto(s)

RESUMEN

The chemicals in food contact materials (FCMs) can migrate into food and endanger human health. In this study, we developed a database of traveling wave collision cross section in nitrogen (TWCCSN2) values for extractables and leachables from FCMs. The database contains a total of 1038 TWCCSN2 values from 675 standards including those commonly used additives and nonintentionally added substances in FCMs. The TWCCSN2 values in the database were compared to previously published values, and 85.7, 87.7, and 64.9% [M + H]+, [M + Na]+, and [M - H]- adducts showed deviations <2%, with the presence of protomers, post-ion mobility spectrometry dissociation of noncovalent clusters and inconsistent calibration are possible sources of CCS deviations. Our experimental TWCCSN2 values were also compared to CCS values from three prediction tools. Of the three, CCSondemand gave the most accurate predictions. The TWCCSN2 database developed will aid the identification and differentiation of chemicals from FCMs in targeted and untargeted analysis.

Asunto(s)

RESUMEN

The synthetic chemicals in food contact materials can migrate into food and endanger human health. In this study, the traveling wave collision cross section in nitrogen values of more than 400 chemicals in food contact materials were experimentally derived by traveling wave ion mobility spectrometry. A support vector machine-based collision cross section (CCS) prediction model was developed based on CCS values of food contact chemicals and a series of molecular descriptors. More than 92% of protonated and 81% of sodiated adducts showed a relative deviation below 5%. Median relative errors for protonated and sodiated molecules were 1.50 and 1.82%, respectively. The model was then applied to the structural annotation of oligomers migrating from polyamide adhesives. The identification confidence of 11 oligomers was improved by the direct comparison of the experimental data with the predicted CCS values. Finally, the challenges and opportunities of current machine-learning models on CCS prediction were also discussed.

Asunto(s)

RESUMEN

The characterization and quantification of phenolic compounds in bearberry leaves were performed using hyphenated ion mobility spectroscopy (IMS) and a quadrupole time-of-flight mass spectrometer. A higher identification confidence level was obtained by comparing the measured collision cross section (TWCCSN2) with predicted values using a machine learning algorithm. A total of 88 compounds were identified, including 14 arbutin derivatives, 33 hydrolyzable tannins, 6 flavanols, 26 flavonols, 9 saccharide derivatives, and glycosidic compounds. Those most reliably reproduced in all samples were quantified against respective standards. Arbutin (47-107 mg/g), 1,2,3,4,6-pentagalloylglucose (6.6-12.9 mg/g), and quercetin 3-galactoside/quercetin 3-glucoside (2.7-5.7 mg/g) were the most abundant phenolic components in the leaves. Quinic acid and ellagic acid were also detected at relatively high concentrations. The antioxidant activity of the most abundant compounds was evaluated. A critical view of the advantages and limitations of traveling wave IMS and CCS for the discovery of natural products is given.

Asunto(s)

RESUMEN

Oligomers, are, in general, unknown components of the polymer. These oligomers can migrate from the polymer into the food and become a non-intentionally added substance to the food. In this work, ion mobility time-of-flight mass spectrometry has been used to identify oligomers migrating from kitchenware. The structure elucidation of oligomers from polyamide 6 and polyamide 66 was achieved through the analysis of accurate m/z values of adducts and collision cross section values of precursor ions together with high-energy fragmentation patterns. Additionally, a method to extract oligomers from sunflower oil, cooked beans, soup and whole milk has been developed. Extraction recoveries ranged from 87 to 102% and limits of detection were from 0.03 to 0.11 mg/kg. It was observed that the migration from kitchenware to real food was below the specified migration limit of 5 mg/kg. However, this limit was exceeded for food simulants, which therefore overestimated the oligomer migration.

Asunto(s)

RESUMEN

Headspace solid-phase microextraction coupled with gas chromatography-mass spectrometry (HS-SPME-GC-MS) was used to analyze the volatile compounds of minced pork meat during storage. The origin of aromatic hydrocarbons in pork was verified by migration test. Principal component analysis (PCA) and orthogonal partial least squares discriminant analysis (OPLS-DA) were applied to characterize the profile of volatile compounds in pork meat and identify the potential volatile markers associated with the spoilage of pork. A total of 41 compounds were identified. Migration test showed that the aromatic hydrocarbons in raw pork are from packaging. Three compounds: ethanol, 2,3-butanediol and 2-ethyl-1-hexanol were selected based on the loading plot and their variables importance in the projection (VIP) values, since they contribute mainly to the discrimination of pork with different storage times. These compounds can be used as additional indicators for quality control of pork.

Asunto(s)

RESUMEN

The total phenolic content (TPC) and antioxidant capacity have been considered as important quality parameters for plant extracts. In this study, bearberry leaves were regarded as studied subject and a reliable method was established to predict the TPC and antioxidant capacity of bearberry leaves. Ultraviolet-visible spectrometry (UV-Vis) and ultra high pressure liquid chromatography coupled to time-of-flight mass spectrometry (UHPLC/Q-TOF-MS) were used to provide spectral fingerprinting and metabolomic profiling. The data obtained (separately and merged) were used to build partial least squares (PLS) regression model. The PLS model built by using ultraviolet-visible spectra provided a satisfactory prediction result. Mid-level data fusion using the scores significantly improved the performance of PLS regression model, the residual predictive deviations (RPDs) for TPC and α, α-diphenyl-ß-picrylhydrazyl (DPPH) were 6.258 and 6.699, respectively, showing an excellent predictive ability. This study proved the potential of combination of UV-Vis spectrometry and UHPLC/Q-TOF-MS in the prediction of TPC and antioxidant capacity of plant extracts.

Asunto(s)

RESUMEN

Open porous 3D architectures with Co2(OH)2CO3 nanowires wrapped by highly conductive reduced graphene oxide films are designed and exploited for the first time as anodes for lithium ion batteries; the materials were fabricated via one-step hydrothermal synthesis and self-assembly based on the electrostatic interaction and coordination principle and delivered superior rate performance (1510 and 445 mA h g-1 at 0.1 and 20 A g-1, respectively) and long cycle stability (5000th reversible capacity of 550 mA h g-1 at 10 A g-1). This extremely encouraging result is attributed to the open porous 3D networks and ultrafine diameters of the nanowires, which achieved better electrical contact between the active materials and shortened the ion/electron transport paths; this highlights the synergistic effect of combining the Co2(OH)2CO3 nanowires and rGO films. Especially, the hydroxide (LiOH) can provide a good skeleton structure, ionic conductivity and fast kinetics. Additionally, the lithium storage mechanism of the Co2(OH)2CO3/rGO electrode has been elaborately studied. This work not only enlightens the design of open porous 3D architecture hybrid anode materials of transition-metal hydroxyl carbonates with great potential prospective applications for high energy lithium storage, but also provides a new strategy to construct graphene-based composite materials via the coordination principle and molecular self-assembly theory to achieve more functional materials.

RESUMEN

A rapid and sensitive method for classification of virgin and recycled expanded polystyrene (EPS) food containers was developed using Fourier transform infrared spectroscopy (FTIR) and chemometrics. This method includes preparing a transparent film by dissolution, examining by FTIR and developing classification models. The degradation of EPS containers occurring during the recycling process was reflected by the carbonyl region of the infrared spectrum which was used as variables for multivariate data analysis. PCA was used to reduce the data dimension and view the sample similarities. Soft independent modelling of class analogy (SIMCA), partial least squares-discrimination analysis (PLS-DA) and linear discrimination analysis (LDA) were applied to construct three classification models. The best discrimination results were obtained by an LDA model, with all samples correctly classified. PLS-DA and SIMCA could not classify the recycled EPS samples with low levels of adulteration. When applying this method to commercially available EPS containers, about 45% of samples were shown to contain recycled polystyrene resins. It is concluded that the carbonyl region of the infrared spectra coupled with chemometrics could be a powerful tool for the classification of virgin and recycled EPS food containers.

Asunto(s)

RESUMEN

The migration of styrene and ethylbenzene from virgin and recycled expanded polystyrene (EPS) containers into isooctane was investigated using gas chromatography-mass spectrometry (GC-MS). EPS containers were in two-sided contact with isooctane at temperatures of 25 and 40°C. It was shown that recycled EPS gave greater migration ratios compared with virgin EPS, which indicated that styrene and ethylbenzene migrated more easily from recycled EPS. In addition, an analytical method to distinguish between virgin and recycled EPS containers was established by GC-MS followed by principal component analysis (PCA). The relative peak area of the identified compounds was used as input data for PCA. Distinct separation between virgin and recycled EPS was achieved on a score plot. Extension of this method to other plastics may be of great interest for recycled plastics identification.

Asunto(s)