RESUMEN

STATEMENT OF PROBLEM: The optimal disinfection protocol that controls adverse effects and promotes effective antimicrobial action on removable prostheses is unclear. PURPOSE: This in vitro study investigated the effect of disinfectant solutions on the biological, physical, mechanical, and chemical properties of removable prosthesis materials. MATERIAL AND METHODS: Specimens of polymethyl methacrylate (PMMA) and cobalt chromium (Co-Cr) alloy were immersed in distilled water (PMMA) or artificial saliva (Co-Cr) as the control and in 0.25% sodium hypochlorite (NaOCl0.25%), 0.5% chloramine T (CT0.5%), and 0.15% Triclosan (TR0.15%). The antibiofilm activity was evaluated by microbial load and cell metabolisms of the mixed biofilm. Physical (color change, sorption, solubility, and surface roughness), mechanical (hardness, flexural, and impact strength), and chemical (corrosion) properties were analyzed before and after simulating a 5-year immersion. Laser confocal microscopy, scanning electron microscopy (SEM), and dispersive energy spectroscopy (EDS) complemented the analyses. The data were analyzed by using the Mann-Whitney U test, Kruskal-Wallis with Dunn posttests, 1-way ANOVA, and repeated measures ANOVA (α=.05). RESULTS: All solutions were effective against bacteria, but only NaOCl0.25% eliminated Candida spp. TR0.15%, and CT0.5% increased cell metabolisms. For interaction (time and solution), there was a reduction in PMMA hardness in the control and TR0.15%. Color, sorption, solubility, and flexural strength did not change. CT0.5% and TR0.15% were similar for impact resistance. CT0.5% caused the lowest roughness. NaOCl0.25% showed the greatest corrosive potential. Dark spots were seen under SEM in Co-Cr stored with NaOCl0.25% and TR0.15%. EDS indicated different proportions of oxygen, cobalt, chromium, and molybdenum. CONCLUSIONS: NaOCl0.25% had the best antimicrobial action. CT0.5% and TR0.15% have potential. Hardness and roughness changes were clinically acceptable, and the other properties remained unchanged. All the solutions caused color changes. NaOCl0.25% was unsatisfactory for use with Co-Cr, CT0.5% was intermediate, and TR0.15% was suitable.

Asunto(s)

Biopelículas , Aleaciones de Cromo , Polimetil Metacrilato , Propiedades de Superficie , Polimetil Metacrilato/química , Biopelículas/efectos de los fármacos , Aleaciones de Cromo/química , Corrosión , Ensayo de Materiales , Hipoclorito de Sodio/farmacología , Microscopía Electrónica de Rastreo , Dureza , Técnicas In Vitro , Desinfectantes/farmacología , Humanos , Resistencia Flexional

RESUMEN

Specific products containing natural resources can contribute to the innovation of complete denture hygiene. OBJECTIVE: To conduct an in vitro evaluation of experimental dentifrices containing essential oils of Bowdichia virgilioides Kunth (BvK), Copaifera officinalis (Co), Eucalyptus citriodora (Ec), Melaleuca alternifolia (Ma) and Pinus strobus (Ps) at 1%. METHODOLOGY: The variables evaluated were organoleptic and physicochemical characteristics, abrasiveness (mechanical brushing machine) simulating 2.5 years, and microbial load (Colony Forming Units - CFU/mL), metabolic activity (XTT assay) and cell viability (Live/Dead® BacLight™ kit) of the multispecies biofilm (Streptococcus mutans: Sm, Staphylococcus aureus: Sa, Candida albicans: Ca and Candida glabrata: Cg). Specimens of heat-polymerized acrylic resins (n=256) (n=96 specimens for abrasiveness, n=72 for microbial load count, n=72 for biofilm metabolic activity, n=16 for cell viability and total biofilm quantification) with formed biofilm were divided into eight groups for manual brushing (20 seconds) with a dental brush and distilled water (NC: negative control), Trihydral (PC: positive control), placebo (Pl), BvK, Co, Ec, Ma or Ps. After brushing, the specimens were washed with PBS and immersed in Letheen Broth medium, and the suspension was sown in solid specific medium. The organoleptic characteristics were presented by descriptive analysis. The values of density, pH, consistency and viscosity were presented in a table. The data were analyzed with the Wald test in a generalized linear model, followed by the Kruskal-Wallis test, Dunn's test (mass change) and the Bonferroni test (UFC and XTT). The Wald test in Generalized Estimating Equations and the Bonferroni test were used to analyze cell viability. RESULTS: All dentifrices showed stable organoleptic characteristics and adequate physicochemical properties. CN, Ec, Ps, Pl and PC showed low abrasiveness. There was a significant difference between the groups (p<0.001) for microbial load, metabolic activity and biofilm viability. CONCLUSIONS: It was concluded that the BvK, Ec and Ps dentifrices are useful for cleaning complete dentures, as they have antimicrobial activity against biofilm. The dentifrices containing Bowdichia virgilioides Kunth showed medium abrasiveness and should be used with caution.

Asunto(s)

Biopelículas , Dentífricos , Dentadura Completa , Ensayo de Materiales , Aceites Volátiles , Biopelículas/efectos de los fármacos , Dentífricos/farmacología , Dentífricos/química , Aceites Volátiles/farmacología , Aceites Volátiles/química , Dentadura Completa/microbiología , Factores de Tiempo , Reproducibilidad de los Resultados , Cepillado Dental , Recuento de Colonia Microbiana , Staphylococcus aureus/efectos de los fármacos , Estadísticas no Paramétricas , Streptococcus mutans/efectos de los fármacos , Análisis de Varianza , Viabilidad Microbiana/efectos de los fármacos , Candida albicans/efectos de los fármacos , Valores de Referencia , Resinas Acrílicas/química , Resinas Acrílicas/farmacología

RESUMEN

PURPOSE: To evaluate in situ the influence of sweat, oil, sunscreen, and disinfectant solution on the color stability, hardness, and roughness of elastomer for facial prostheses. MATERIALS AND METHODS: Standardized and intrinsically pigmented specimens remained in contact with human skin from the same person for 30 days, considering exposures (n = 36 per group), absent of exposition (Control, C); sweat and oiliness contact (SO); sweat and oiliness associated with sunscreen (SOS); 0.12% chlorhexidine digluconate immersion (CD0.12%); and all agents exposed (SOSCD). The main variables were color change (CIELab and National Standard Bureau system, NBS), Shore A hardness, and surface roughness, measured at baseline and 30 days. Qualitative analyses were performed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The data were analyzed by Kruskal-Wallis tests (color) and two-way ANOVA (hardness and roughness) with Sidak post-test (α = 0.05). RESULTS: CD0.12% (1.54 ± 0.49) and SOSCD (2.10 ± 1.03) had similar effects and caused the smallest color changes, considered mild and noticeable (NBS), respectively. SOS promoted the greatest color change (6.99 ± 1.43, NBS: large) and hardness (17.97 ± 0.56); SOS promoted intermediate roughness (3.48 ± 1.05) between SOSCD (2.25 ± 0.53), and two similar groups: C (4.46 ± 0.95), and CD0.12% (4.39 ± 1.26). The qualitative analysis showed an irregular, dense, dry, and whitish layer on the surface of the specimens exposed to sunscreen, which was reduced when in contact with 0.12% chlorhexidine digluconate. CONCLUSIONS: Endogenous and exogenous factors are capable of altering elastomer properties. The 0.12% chlorhexidine digluconate minimized the changes caused by sweat, oil, and sunscreen.

RESUMEN

OBJECTIVE: This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). METHODOLOGY: Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). RESULTS: The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. CONCLUSION: The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

Asunto(s)

Resinas Acrílicas , Adhesión Bacteriana , Biopelículas , Candida albicans , Bases para Dentadura , Ensayo de Materiales , Microscopía Confocal , Microscopía Electrónica de Rastreo , Impresión Tridimensional , Staphylococcus aureus , Streptococcus mutans , Propiedades de Superficie , Humectabilidad , Streptococcus mutans/fisiología , Staphylococcus aureus/fisiología , Candida albicans/fisiología , Bases para Dentadura/microbiología , Resinas Acrílicas/química , Análisis de Varianza , Reproducibilidad de los Resultados , Dentadura Completa/microbiología , Valores de Referencia , Recuento de Colonia Microbiana , Modelos Lineales

RESUMEN

Abstract Specific products containing natural resources can contribute to the innovation of complete denture hygiene. Objective: To conduct an in vitro evaluation of experimental dentifrices containing essential oils of Bowdichia virgilioides Kunth (BvK), Copaifera officinalis (Co), Eucalyptus citriodora (Ec), Melaleuca alternifolia (Ma) and Pinus strobus (Ps) at 1%. Methodology: The variables evaluated were organoleptic and physicochemical characteristics, abrasiveness (mechanical brushing machine) simulating 2.5 years, and microbial load (Colony Forming Units - CFU/mL), metabolic activity (XTT assay) and cell viability (Live/Dead® BacLight™ kit) of the multispecies biofilm (Streptococcus mutans: Sm, Staphylococcus aureus: Sa, Candida albicans: Ca and Candida glabrata: Cg). Specimens of heat-polymerized acrylic resins (n=256) (n=96 specimens for abrasiveness, n=72 for microbial load count, n=72 for biofilm metabolic activity, n=16 for cell viability and total biofilm quantification) with formed biofilm were divided into eight groups for manual brushing (20 seconds) with a dental brush and distilled water (NC: negative control), Trihydral (PC: positive control), placebo (Pl), BvK, Co, Ec, Ma or Ps. After brushing, the specimens were washed with PBS and immersed in Letheen Broth medium, and the suspension was sown in solid specific medium. The organoleptic characteristics were presented by descriptive analysis. The values of density, pH, consistency and viscosity were presented in a table. The data were analyzed with the Wald test in a generalized linear model, followed by the Kruskal-Wallis test, Dunn's test (mass change) and the Bonferroni test (UFC and XTT). The Wald test in Generalized Estimating Equations and the Bonferroni test were used to analyze cell viability. Results: All dentifrices showed stable organoleptic characteristics and adequate physicochemical properties. CN, Ec, Ps, Pl and PC showed low abrasiveness. There was a significant difference between the groups (p<0.001) for microbial load, metabolic activity and biofilm viability. Conclusions: It was concluded that the BvK, Ec and Ps dentifrices are useful for cleaning complete dentures, as they have antimicrobial activity against biofilm. The dentifrices containing Bowdichia virgilioides Kunth showed medium abrasiveness and should be used with caution.

RESUMEN

Abstract Studies evaluating the roughness, wettability and microbial adhesion of 3D-printed resins for complete denture bases and teeth are scarce. Objective This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). Methodology Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). Results The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. Conclusion The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

RESUMEN

OBJECTIVE: To assess the association between risk factors for developing denture stomatitis (DS) and oral health-related quality of life (OHRQoL) in complete denture wearers. METHODOLOGY: Participants of both sexes, wearing complete dentures, were classified using the modified Newton classification for the absence or the severity of DS and allocated to groups Normal or zero, IA, IB, II, and III. Lifestyle, oral and denture history, and medication use were assessed using specific questionnaires; clinical parameters such as anatomical characteristics of support were evaluated with the Kapur classification; salivary flow (SF) was calculated by the volume of unstimulated saliva per minute; and microbial load was determined by counting colony forming units (CFU) of target microorganisms present in the biofilm collected from dentures and palate. OHIP-EDENT assessed the OHRQoL. Kendall's tau_b and Spearman tests were applied with a significance level of 5%. RESULTS: 184 patients (143 female and 41 male) aged 65.5 ± 6.8 years were evaluated. Positive correlations were found for sex (women; p=0.013, r=0.16), individuals who started to consume alcoholic beverages as a young adult (18-27 years) (p=0.008, r=0.22), CFU of Candida spp. (p<0.001, r=0.27 denture; p<0.001, r=0.31 palate); Candida albicans (p=0.004, r=0.22 denture; p=0.003, r=0.25 palate), and Candida glabrata (p=0.004, r=0.22 denture; p=0.001, r=0.27 palate). Moreover, negative correlations with DS were found for CFU of Staphylococcus spp. (p=0.004, r=-0.20 palate) and enterobacteria (p=0.002, r=-0.24 palate), as well as a negative correlation between SF (p=0.009, r=-0.193) and DS. The CFU of Staphylococcus spp. and enterobacteria on the palate significantly correlated with OHRQoL. CONCLUSION: Being female, consuming alcoholic beverages as a young adult, CFU of Candida spp., Candida albicans, Candida glabrata, and salivary flow may be the most significant risk factors for DS. The microbial load of Staphylococcus spp. and enterobacteria seems to influence the quality of life for complete denture wearers.

Asunto(s)

Estomatitis Subprotética , Humanos , Masculino , Femenino , Estomatitis Subprotética/microbiología , Estudios Transversales , Calidad de Vida , Candida , Candida albicans , Dentadura Completa/efectos adversos , Factores de Riesgo

RESUMEN

To assess the effect of hygiene protocols and time on the physical-mechanical properties and colony-forming units (CFU) of Candida albicans, Staphylococcus aureus, and Streptococcus mutans on 3D-printed denture resins (SmartPrint and Yller) with extrinsic pigmentation compared to conventional resin (CR). The protocols were evaluated: brushing (B), brushing and immersion in water (W), 0.25% sodium hypochlorite (SH), and 0.15% triclosan (T), simulating 0, 1, 3, and 5 years. The data were analyzed by ANOVA with repeated measurements, ANOVA (Three-way) and Tukey's post-test, generalized linear model with Bonferroni adjustment, and ANOVA (Two-way) and Tukey's post-test (α = 0.05). The protocols influenced color (p = 0.036) and Knoop hardness (p < 0.001). Surface roughness was influenced by protocols/resin (p < 0.001) and time/resin (p = 0.001), and flexural strength by time/protocols (p = 0.014). C. albicans showed interactions with all factors (p = 0.033). Staphylococcus aureus was affected by protocols (p < 0.001). Streptococcus mutans exhibited no count for SH and T (p < 0.001). Yller resin showed more color changes. The 3D-printed resins displayed lower microhardness, increased roughness, and decreased flexural strength compared to CR with all protocols in a simulated period of 5 years. The indication of printed resins should be restricted to less than 3 years.

RESUMEN

Abstract Objective To assess the association between risk factors for developing denture stomatitis (DS) and oral health-related quality of life (OHRQoL) in complete denture wearers. Methodology Participants of both sexes, wearing complete dentures, were classified using the modified Newton classification for the absence or the severity of DS and allocated to groups Normal or zero, IA, IB, II, and III. Lifestyle, oral and denture history, and medication use were assessed using specific questionnaires; clinical parameters such as anatomical characteristics of support were evaluated with the Kapur classification; salivary flow (SF) was calculated by the volume of unstimulated saliva per minute; and microbial load was determined by counting colony forming units (CFU) of target microorganisms present in the biofilm collected from dentures and palate. OHIP-EDENT assessed the OHRQoL. Kendall's tau_b and Spearman tests were applied with a significance level of 5%. Results 184 patients (143 female and 41 male) aged 65.5 ± 6.8 years were evaluated. Positive correlations were found for sex (women; p=0.013, r=0.16), individuals who started to consume alcoholic beverages as a young adult (18-27 years) (p=0.008, r=0.22), CFU of Candida spp. (p<0.001, r=0.27 denture; p<0.001, r=0.31 palate); Candida albicans (p=0.004, r=0.22 denture; p=0.003, r=0.25 palate), and Candida glabrata (p=0.004, r=0.22 denture; p=0.001, r=0.27 palate). Moreover, negative correlations with DS were found for CFU of Staphylococcus spp. (p=0.004, r=-0.20 palate) and enterobacteria (p=0.002, r=-0.24 palate), as well as a negative correlation between SF (p=0.009, r=-0.193) and DS. The CFU of Staphylococcus spp. and enterobacteria on the palate significantly correlated with OHRQoL. Conclusion Being female, consuming alcoholic beverages as a young adult, CFU of Candida spp., Candida albicans, Candida glabrata, and salivary flow may be the most significant risk factors for DS. The microbial load of Staphylococcus spp. and enterobacteria seems to influence the quality of life for complete denture wearers.

RESUMEN

Denture-related stomatitis (DRS) is frequent oral inflammation in complete denture wearers. This study evaluated the effect of a hygiene protocol on DRS remission, local inflammatory factors, and hemodynamic responses. Thirty-three individuals were enrolled in the study. The outcomes were measured before and after 10 days of a hygiene protocol treatment consisting of brushing the palate with a soft brush and water and denture brushing with a denture-specific brush and mild soap, as well as immersion of the denture for 20 min in a 0.25% sodium hypochlorite solution. Data were analyzed by paired Wilcoxon for biofilm removal and CFU count of microorganisms. The paired T test was used to assess salivary MUC 1, cytokines, and arterial pressure (p < 0.05). A significant difference was found in the DRS degree (p < 0.001), biofilm (p < 0.001), microbial load of Candida spp. (p < 0.001), Gram-negative (p < 0.004), Staphylococcus spp. (p < 0.001), and S. mutans (p < 0.001) of the denture, and S. mutans (p < 0.001) of the palate after use of the protocol. The salivary flow (p = 0.2) and pH (p = 0.97) did not change; there was an increase of MUC 1 (p = 0.049) and a decrease in IL-6 (p = 0.038), IL-2 (p = 0.04), IL-10 (p = 0.041), and IFNγ (p = 0.04). There was also a decrease in systolic (p = 0.012) and mean arterial pressure (p = 0.02). The current hygiene protocol reduced the inflammation degree of DRS and promoted an improvement of local inflammatory factors and a reduction in the systolic arterial pressure of the patients.

RESUMEN

OBJECTIVE: This study evaluated the effect of different glucose concentration on biofilm formation of Candida albicans and Candida glabrata strains isolated from diabetic and non-diabetic individuals. METHODS: The study was divided into two stages: (I) selection and identification of 48 C. albicans and C. glabrata strains by polymerase chain reaction followed by restriction fragment length polymorphism analysis (PCR/RFLP); (II) evaluation of biofilm formation by means of viability rates (colony-forming units), biofilm dry matter (mg) and biofilm-covered areas (µm2). Statistical comparisons were performed through nonparametric analysis of longitudinal data in factorial experiments with pairwise comparisons using Friedman Conover's test (α = 0.05). RESULTS: All the Candida spp. had their identifications confirmed by PCR/RFLP. C. albicans biofilm of strains from diabetic individuals cultivated in different glucose concentration showed higher viability rates than strains from non-diabetic individuals. No difference was observed on viability of C. glabrata biofilm. Regarding biofilm dry matter, C. albicans biofilm of strains from diabetic individuals cultivated in different glucose concentration showed lower amount in weight than strains from non-diabetic individuals. In C. glabrata strains, this result was only observed in biofilms cultivated with no glucose supplementation. With regard to biofilm-covered areas, only glucose supplementation and non-diabetic condition showed a positive effect on C. albicans biofilm development, and no condition affected C. glabrata biofilm formation. CONCLUSION: The strain type (C. albicans and C. glabrata) isolated from diabetic and non-diabetic individuals influenced on biofilm formation, but glucose supplementation did not.

Asunto(s)

Candida albicans , Diabetes Mellitus , Antifúngicos , Biopelículas , Candida glabrata , Suplementos Dietéticos , Glucosa , Humanos

RESUMEN

Some studies have demonstrated a high prevalence of Candida species in patients with tuberculosis (TB). This is most likely due to long-term antimicrobial therapy. To date, no longitudinal studies addressed the effects of anti-TB treatment on the fungal burden and virulence of Candida spp. This study investigated the prevalence and virulence of Candida spp. in the oral cavity of 30 TB patients at different stages of treatment through a cohort study. These results were compared with those of 60 systemically healthy individuals in a cross-sectional study. Oral rinse samples from TB patients were collected before 45 and after 120 days of treatment. In the control group, the biological samples were collected only once. Candida spp. were identified by restriction fragment length polymorphism (RFLP) assays, and the following virulence factors were studied: phospholipase C and proteinase production, as well as Candida spp. biofilm and hyphae formation. The clinical diagnosis of TB and its treatment time were associated with the greater fungal burden (p < 0.0001), presence of non-albicans Candida (NAC) species (p = 0.0003), and increased virulence factors when compared with the Candida spp. isolated from systemically healthy individuals. The results showed that anti-TB treatment time was responsible for the increased fungal burden and isolation of NAC in TB patients (p = 0.0233). The increased prevalence, quantification, and virulence of Candida spp. isolated from the oral cavity of TB patients highlight the greater risk of oral lesions and cases of systemic dissemination in these patients.

Asunto(s)

Antituberculosos , Biopelículas , Candida , Antituberculosos/uso terapéutico , Candida/clasificación , Candida/patogenicidad , Estudios de Cohortes , Estudios Transversales , Humanos , Boca/microbiología , Virulencia

RESUMEN

BACKGROUND: Appropriated denture hygiene is a predictive factor for longevity of rehabilitation treatment and maintenance of the oral mucosal health. Although, disinfectant solutions are commonly used as denture cleansers, the impact of these solutions on acrylic resin-based dentures remain unclear. OBJECTIVE: To evaluate, in vitro, the antibiofilm activity of complete denture hygiene solutions and their effects on physical and mechanical properties of acrylic resin. METHODOLOGY: For antibiofilm activity measurement acrylic resin specimens were contaminated with Candida albicans, Candida glabrata and Streptococcus mutans. After biofilm growth, the specimens were assigned to the hygiene solutions: Distilled water (Control); 0.2% Sodium hypochlorite (SH); Efferdent Power Clean Crystals (EPC) and 6.25% Ricinus communis (RC). The viability of microorganisms was evaluated by agar plate counts. In parallel, physical, and mechanical properties of the acrylic resin were evaluated after simulating a 5-year period of daily immersion in the previously mentioned solutions. The changes in surface roughness, color, microhardness, flexural strength, impact strength, sorption and solubility were evaluated. Data were compared by ANOVA followed by the Tukey test or Kruskal-Wallis followed by the Dunn test depending on the distribution (α=0.05). RESULTS: Regarding antibiofilm action, SH eliminated all microorganisms while EPC and RC exhibited moderate action against S. mutans (p=0.001) and C. glabrata (p<0.001), respectively. Relative to effects on the physical and mechanical properties of the acrylic resin, RC led to higher values of color change (p=0.030), hardness (p<0.001), surface roughness (p=0.006) and flexural strength (p<0.001). Moreover, RC induced the highest values of changes in solubility (p<0.001). EPC promoted greater changes in surface morphology, whereas immersion in SH retained the initial appearance of the acrylic resin surface. All hygiene solutions reduced the impact strength (p<0.05). CONCLUSION: SH presented the most effective antibiofilm activity. In addition, changes on properties were observed after immersion in RC, which were considered within acceptable limits.

Asunto(s)

Resinas Acrílicas , Limpiadores de Dentadura , Biopelículas , Bases para Dentadura , Limpiadores de Dentadura/farmacología , Dentadura Completa , Higiene , Ensayo de Materiales , Propiedades de Superficie

RESUMEN

BACKGROUND: Understanding the behavior of Candida spp. when exposed to denture disinfectants is essential to optimize their effectiveness. Changes in the virulence factors may cause increased resistance of Candida spp. to disinfectant agents. OBJECTIVE: To evaluate the microbial load, cellular metabolism, hydrolytic enzyme production, hyphae formation, live cell and biofilm quantification of Candida albicans, Candida tropicalis and Candida glabrata after exposure to disinfectant solutions. METHODOLOGY: Simple biofilms were grown on heat-polymerized acrylic resin specimens, and divided into groups according to solutions/strains: distilled water (control); 0.25% sodium hypochlorite (NaOCl 0.25% ); 10% Ricinus communis (RC 10%); and 0.5% Chloramine T (CT 0.5%). The virulence factors were evaluated using the CFU count (microbial load), XTT method (cell metabolism), epifluorescence microscopy (biofilm removal and live or dead cells adhered), protease and phospholipase production and hyphae formation. Data were analyzed (α=0.05) by one-way ANOVA/ Tukey post hoc test, Kruskal-Wallis test and Wilcoxon test. RESULTS: NaOCl 0.25% was the most effective solution. CT 0.5% reduced the number of CFUs more than RC 10% and the control. RC 10% was effective only against C. glabrata. RC 10% and CT 0.5% decreased the cellular metabolism of C. albicans and C. glabrata. Enzyme production was not affected. Hyphal growth in the RC 10% and CT 0.5% groups was similar to that of the control. CT 0.5% was better than RC 10% against C. albicans and C. tropicalis when measuring the total amount of biofilm and number of living cells. For C. glabrata, CT 0.5% was equal to RC 10% in the maintenance of living cells; RC 10% was superior for biofilm removal. CONCLUSIONS: The CT 0.5% achieved better results than those of Ricinus communis at 10%, favoring the creation of specific products for dentures. Adjustments in the formulations of RC 10% are necessary due to efficacy against C. glabrata. The NaOCl 0.25% is the most effective and could be suitable for use as a positive control.

Asunto(s)

Candida , Desinfectantes , Resinas Acrílicas , Biopelículas , Candida albicans , Factores de Virulencia

RESUMEN

The use of bacteriophages for the treatment of bacterial infections has been extensively studied. Nonetheless, the stress response regarding bacteriophage infection and the expression of virulence factors of Pseudomonas aeruginosa after phage infection is poorly discussed. In this study, we evaluated biofilm formation capacity and expression of virulence factors of P. aeruginosa after bacteriophage infection. Biofilm growth rates, biofilm morphology, pyocyanin production and elastase activity were evaluated after 2, 8, 24 and 48 h of co-cultivation with bacteriophages that was recently characterized and showed to be infective towards clinical isolates. In parallel, quantitative real-time polymerase chain reactions were carried out to verify the expression of virulence-related genes. Bacteriophages promoted substantial changes in P. aeruginosa biofilm growth at early co-culture time. In addition, at 8 h, we observed that some cultures developed filaments. Although bacteriophages did not alter both pyocyanin and protease activity, changes on the expression level of genes related to virulence factors were detected. Usually, lasI, pslA, lasB and phzH genes were upregulated after 2 and 48 h of co-culture. These results highlight the need for extensive investigation of pathways and molecules involved in phage infection, since the transcriptional changes would suggest a response activation by P. aeruginosa.

Asunto(s)

Bacteriófagos , Infecciones por Pseudomonas , Biopelículas , Humanos , Pseudomonas aeruginosa/genética , Percepción de Quorum , Virulencia , Factores de Virulencia/genética

RESUMEN

PURPOSE: This prospective study evaluated and correlated the impact of ocular prostheses on quality of life and stress with socioeconomic level and clinical characteristics. The clinical difficulties and perceptions of patients after ocular rehabilitation were evaluated. MATERIALS AND METHODS: Anophthalmic patients (at least 18 years of age) who were not users of ocular prostheses were recruited. The Medical Outcomes Short-Form Health Survey (SF-36) and Perceived Stress Scale (PSS-10) questionnaires were administered before and after 3 and 6 months of prosthesis installation. Clinical characteristics, difficulties, and perceptions were evaluated by quantitative and descriptive analysis (7 days, 3 months, 6 months). Data were analyzed by the Friedman test and Pearson Correlation test (α = 0.05). RESULTS: The final sample consisted of 26 patients. Quality of life showed improvement in the "Bodily Pain" and "General Health" domains. Wearing the prosthesis did not influence perceived stress. The clinical evaluation showed clinical discharge over 6 months and presence of pain only at 7 days. A weak correlation occurred between sociodemographic characteristics and the categories "Role-Physical" (r = 0.423) and "General Health" (r = 0.494); cause of anophthalmia and "Role-Physical" (r = -0.471); and type of surgery and "General Health" (r = -0.432). CONCLUSIONS: According to the results of this study, the provision of ocular prostheses showed positive influence in 2 domains of quality of life and weak correlations with socioeconomic level, type of surgery, and cause of loss. Ocular rehabilitation did not influence stress. The use and care of the prostheses did not affect tissue inflammation, but the discharge was continuous.

Asunto(s)

Anoftalmos , Implantes Dentales , Ojo Artificial , Humanos , Estudios Prospectivos , Calidad de Vida , Estrés Psicológico/etiología , Encuestas y Cuestionarios

RESUMEN

Evaluate, through a randomized clinical trial, the efficacy of brushing associated with oral irrigation in maintaining implant and overdenture hygiene. Thirty-eight participants, who had a clinically acceptable conventional maxillary complete denture and mandibular overdenture retained by either implants or mini-implants using an O-ring-retained system, were enrolled to participate in the study. They were instructed to use two different hygiene methods, in a random sequence for a period of 14 days, with a 7-day wash-out interposed period: (I) mechanical brushing (MB); (II) association of mechanical brushing with oral irrigation (WP). Biofilms from both subgingival sulci and overdentures were collected and processed by Checkerboard DNA-DNA hybridization method at baseline and after using the proposed hygiene protocols. Comparisons were performed using Wilcoxon test and Friedman test with Benjamini-Hochberg false discovery rate, followed by Conover post-hoc test (α = 0.05). In the subgingival sulci-related biofilm, a lower number of microbial cells were detected, after WP compared to the MB method (P < 0.001). The findings of overdenture-related biofilm suggest that both methods were similar (P = 0.607) being the identified microbiota qualitatively coincident after each method. Despite the number of microbial counts, it was concluded that the association of mechanical brushing with oral irrigation was more effective in reducing microorganisms in the subgingival sulci biofilm; however, the same outcome was not observed in the overdentures.

Asunto(s)

Implantes Dentales , Prótesis de Recubrimiento , Prótesis Dental de Soporte Implantado , Retención de Dentadura , Dentadura Completa Inferior , Humanos , Higiene , Mandíbula

RESUMEN

Hygiene of implant-supported prostheses and the health of peri-implant tissues are considered to be predictive factors of successful prosthetic rehabilitation. Therefore, the purpose of this study was to evaluate the effectiveness of brushing associated with oral irrigation measured as biofilm-removing capacity, maintenance of healthy oral tissues, and patient satisfaction. A randomized, crossover clinical trial was conducted with 38 patients who wore conventional maxillary complete dentures and mandibular overdentures retained by the O-ring system. The patients were instructed to use the following hygiene methods for 14 days: mechanical brushing (MB; brush and dentifrice, control) and MB with oral irrigation (Waterpik [WP], experimental). Biofilm-removing capacity and maintenance of healthy oral tissues were evaluated by the modified plaque index (PI), gingival index (GI), probing depth (PD), and bleeding on probing index (BP) recorded at baseline and after each method. In parallel, patients answered a specific questionnaire using a visual analog scale after each hygiene method. Data were analyzed by Friedman and Wilcoxon tests (α = .05). The results showed significantly lower PI, GI, PD, and BP after application of the hygiene methods (P < .001) than those observed at baseline. However, no significant difference was found between MB and WP. The responses to the satisfaction questionnaire for both methods showed high mean values for all questions, with no statistically significant difference found between the answers given after the use of MB and WP (P > .05). The findings suggest that WP was effective in reducing PI, GI, PD, and BP indices and provided a high level of patient satisfaction.

Asunto(s)

Implantes Dentales , Prótesis de Recubrimiento , Prótesis Dental de Soporte Implantado , Retención de Dentadura , Humanos , Mandíbula , Satisfacción del Paciente , Resultado del Tratamiento

RESUMEN

Abstract Understanding the behavior of Candida spp. when exposed to denture disinfectants is essential to optimize their effectiveness. Changes in the virulence factors may cause increased resistance of Candida spp. to disinfectant agents. Objective To evaluate the microbial load, cellular metabolism, hydrolytic enzyme production, hyphae formation, live cell and biofilm quantification of Candida albicans, Candida tropicalis and Candida glabrata after exposure to disinfectant solutions. Methodology Simple biofilms were grown on heat-polymerized acrylic resin specimens, and divided into groups according to solutions/strains: distilled water (control); 0.25% sodium hypochlorite (NaOCl 0.25% ); 10% Ricinus communis (RC 10%); and 0.5% Chloramine T (CT 0.5%). The virulence factors were evaluated using the CFU count (microbial load), XTT method (cell metabolism), epifluorescence microscopy (biofilm removal and live or dead cells adhered), protease and phospholipase production and hyphae formation. Data were analyzed (α=0.05) by one-way ANOVA/ Tukey post hoc test, Kruskal-Wallis test and Wilcoxon test. Results NaOCl 0.25% was the most effective solution. CT 0.5% reduced the number of CFUs more than RC 10% and the control. RC 10% was effective only against C. glabrata. RC 10% and CT 0.5% decreased the cellular metabolism of C. albicans and C. glabrata. Enzyme production was not affected. Hyphal growth in the RC 10% and CT 0.5% groups was similar to that of the control. CT 0.5% was better than RC 10% against C. albicans and C. tropicalis when measuring the total amount of biofilm and number of living cells. For C. glabrata, CT 0.5% was equal to RC 10% in the maintenance of living cells; RC 10% was superior for biofilm removal. Conclusions The CT 0.5% achieved better results than those of Ricinus communis at 10%, favoring the creation of specific products for dentures. Adjustments in the formulations of RC 10% are necessary due to efficacy against C. glabrata. The NaOCl 0.25% is the most effective and could be suitable for use as a positive control.

Asunto(s)

Candida , Desinfectantes , Resinas Acrílicas , Candida albicans , Biopelículas , Factores de Virulencia

RESUMEN

Abstract Appropriated denture hygiene is a predictive factor for longevity of rehabilitation treatment and maintenance of the oral mucosal health. Although, disinfectant solutions are commonly used as denture cleansers, the impact of these solutions on acrylic resin-based dentures remain unclear. Objective To evaluate, in vitro, the antibiofilm activity of complete denture hygiene solutions and their effects on physical and mechanical properties of acrylic resin. Methodology For antibiofilm activity measurement acrylic resin specimens were contaminated with Candida albicans, Candida glabrata and Streptococcus mutans. After biofilm growth, the specimens were assigned to the hygiene solutions: Distilled water (Control); 0.2% Sodium hypochlorite (SH); Efferdent Power Clean Crystals (EPC) and 6.25% Ricinus communis (RC). The viability of microorganisms was evaluated by agar plate counts. In parallel, physical, and mechanical properties of the acrylic resin were evaluated after simulating a 5-year period of daily immersion in the previously mentioned solutions. The changes in surface roughness, color, microhardness, flexural strength, impact strength, sorption and solubility were evaluated. Data were compared by ANOVA followed by the Tukey test or Kruskal-Wallis followed by the Dunn test depending on the distribution (α=0.05). Results Regarding antibiofilm action, SH eliminated all microorganisms while EPC and RC exhibited moderate action against S. mutans (p=0.001) and C. glabrata (p<0.001), respectively. Relative to effects on the physical and mechanical properties of the acrylic resin, RC led to higher values of color change (p=0.030), hardness (p<0.001), surface roughness (p=0.006) and flexural strength (p<0.001). Moreover, RC induced the highest values of changes in solubility (p<0.001). EPC promoted greater changes in surface morphology, whereas immersion in SH retained the initial appearance of the acrylic resin surface. All hygiene solutions reduced the impact strength (p<0.05). Conclusion SH presented the most effective antibiofilm activity. In addition, changes on properties were observed after immersion in RC, which were considered within acceptable limits.

Asunto(s)

Resinas Acrílicas , Limpiadores de Dentadura/farmacología , Propiedades de Superficie , Ensayo de Materiales , Higiene , Biopelículas , Bases para Dentadura , Dentadura Completa