RESUMEN
Detection of UV light has traditionally been a major challenge for Si photodiodes due to reflectance losses and junction recombination. Here we overcome these problems by combining a nanostructured surface with an optimized implanted junction and compare the obtained performance to state-of-the-art commercial counterparts. We achieve a significant improvement in responsivity, reaching near ideal values at wavelengths all the way from 200 to 1000 nm. Dark current, detectivity, and rise time are in turn shown to be on a similar level. The presented detector design allows a highly sensitive operation over a wide wavelength range without making major compromises regarding the simplicity of the fabrication or other figures of merit relevant to photodiodes.
RESUMEN
Germanium (Ge) is a vital element for applications that operate in near-infrared wavelengths. Recent progress in developing nanostructured Ge surfaces has resulted in >99% absorption in a wide wavelength range (300-1700 nm), promising unprecedented performance for optoelectronic devices. However, excellent optics alone is not enough for most of the devices (e.g. PIN photodiodes and solar cells) but efficient surface passivation is also essential. In this work, we tackle this challenge by applying extensive surface and interface characterization including transmission electron microscopy and x-ray photoelectron spectroscopy, which reveals the limiting factors for surface recombination velocity (SRV) of the nanostructures. With the help of the obtained results, we develop a surface passivation scheme consisting of atomic-layer-deposited aluminum oxide and sequential chemical treatment. We achieve SRV as low as 30 cm s-1combined with â¼1% reflectance all the way from ultraviolet to NIR. Finally, we discuss the impact of the achieved results on the performance of Ge-based optoelectronic applications, such as photodetectors and thermophotovoltaic cells.
RESUMEN
Packaged photodiodes suffer from Fresnel reflection from the package window glass, especially at high angles of incidence. This has a notable impact particularly on black silicon (b-Si) photodiodes, which have extreme sensitivity. In this work, we show that by adding a simple grass-like alumina antireflection (AR) coating on the window glass, excellent omnidirectional sensitivity and high external quantum efficiency (EQE) of b-Si photodiodes can be retained. We demonstrate that EQE increases at all angles, and up to 15% absolute increases in EQE at a 70° angle of incidence compared to conventional uncoated glass. Furthermore, even at the incidence angle of 50°, the double-sided coating provides higher EQE than bare glass at normal incidence. Our results demonstrate that grass-like alumina coatings are efficient and omnidirectional AR coatings for photodiode package windows in a wide wavelength range across the visible spectrum to near-infrared radiation.
RESUMEN
Nanostructured surfaces are known to provide excellent optical properties for various photonics devices. Fabrication of such nanoscale structures to germanium (Ge) surfaces by metal assisted chemical etching (MACE) is, however, challenging as Ge surface is highly reactive resulting often in micron-level rather than nanoscale structures. Here we show that by properly controlling the process, it is possible to confine the chemical reaction only to the vicinity of the metal nanoparticles and obtain nanostructures also in Ge. Furthermore, it is shown that controlling the density of the nanoparticles, concentration of oxidizing and dissolving agents as well as the etching time plays a crucial role in successful nanostructure formation. We also discuss the impact of high mobility of charge carriers on the chemical reactions taking place on Ge surfaces. As a result we propose a simple one-step MACE process that results in nanoscale structures with less than 10% surface reflectance in the wavelength region between 400 and 1600 nm. The method consumes only a small amount of Ge and is thus industrially viable and also applicable to thin Ge layers.
RESUMEN
Black silicon (b-Si) is currently being adopted by several fields of technology, and its potential has already been demonstrated in various applications. We show here that the increased surface area of b-Si, which has generally been considered as a drawback e.g. in applications that require efficient surface passivation, can be used as an advantage: it enhances gettering of deleterious metal impurities. We demonstrate experimentally that interstitial iron concentration in intentionally contaminated silicon wafers reduces from 1.7 × 1013 cm-3 to less than 1010 cm-3 via b-Si gettering coupled with phosphorus diffusion from a POCl3 source. Simultaneously, the minority carrier lifetime increases from less than 2 µs of a contaminated wafer to more than 1.5 ms. A series of different low temperature anneals suggests segregation into the phosphorus-doped layer to be the main gettering mechanism, a notion which paves the way of adopting these results into predictive process simulators. This conclusion is supported by simulations which show that the b-Si needles are entirely heavily-doped with phosphorus after a typical POCl3 diffusion process, promoting iron segregation. Potential benefits of enhanced gettering by b-Si include the possibility to use lower quality silicon in high-efficiency photovoltaic devices.