RESUMEN

This study aimed to incorporate pistachio shell hemicellulose into a film of gelatin and glycerol for the production of biodegradable films. The gelatin and glycerol are chosen because of their functional properties, which make it extensively used in food industry. The film composition was defined after a statistical optimization by central composite face-centered design and response surface methodology. The hemicellulose/gelatin ratio of 35.93% and the glycerol ratio of 18.02% were the optimum conditions to obtain lower film water solubility, higher tensile strength, and elongation at break values. The physical, structural, mechanical, and barrier properties of the developed hemicellulose-gelatin film were analyzed and compared with those of the gelatin film. Tensile strength and film water solubility values were reduced significantly with hemicellulose incorporation from 20.41 to 16.64 MPa and 49.57 to 39.21%, respectively, while EB was enhanced by 4.34 times. In addition, hemicellulose incorporation enhanced the water vapor permeability and the film degradation in the soil. The films were also examined by Fourier transform infrared spectroscopy and differential scanning calorimetry. The novelty of this study is to use pistcahio shell hemicellulose in the production of an edible film for the first time. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-024-05968-4.

RESUMEN

This research aimed to assess the hot air-assisted radio frequency drying (HA-RFD) of orange slices to evaluate the possibility of producing high-quality dried orange slices and overcome the problem of the long drying time and the high energy consumption. The effect of electrode distance (60, 70, and 80 mm) and number of slices (1-3 slices; 4 mm thickness per slice) on the HA-RFD of orange slices was evaluated. Orange slices in three layers with a total thickness of 12 mm and an electrode gap of 70 mm were picked to dry the orange slices in the shortest time. The quality of orange slices dried with HA-RFD was compared with those of HA-dried (HAD) and freeze-dried (FD) samples. HA-RFD allowed a 67% decrease in the time of drying of the orange slices (from 1170 to 390 min) when compared to HAD. Total phenolic content (TPC), total flavonoid content (TFC), antioxidant activity, and color values were affected by the drying technique. HA-RFD showed higher TPC, TFC, and antioxidant activity than HAD. The FD samples showed the highest TPC (928 mg GAE/100 g dw), TFC (200 mg rutin/100 g dw), and antioxidant activity (67.58%). Moreover, the samples dried with HA-RFD resulted in the least color change in comparison to HAD and FD samples. Regarding vitamin C, FD samples were the best, followed by HA-RFD and HAD, respectively. Considering the final product quality, and the characteristics of drying techniques, especially drying time and drying rate, HA-RFD proved to be an alternative technique to the HAD for producing dried orange slices. PRACTICAL APPLICATION: HA-RFD was applied for the first time as an alternative technology to dry orange slices. The quality of orange samples dried by HA-RFD was compared with samples that dried by HAD and FD. The results indicated that the HA-RFD technique is a good method to dry orange slices by considering the drying characteristics and the final product quality.

RESUMEN

In this research, pectin extraction from grapefruit peel (GPP) was performed using a microwave-assisted high-pressure CO2/H2O (MW-HPCO2) system. The Box-Behnken design of response surface methodology was applied for the optimization of MW-HPCO2 extraction conditions to obtain the highest pectin yield. The effects of temperature, time, and liquid/solid ratio on pectin yield were examined in the range of 100-150 °C, 5-15 min, and 10-20 mL g-1, respectively. Under the optimum extraction conditions (147 °C, 3 min, and 10 mL g-1), pectin was obtained with a yield of 27.53%. The results obtained showed that the extraction temperature and time had a strong effect on the pectin yield, while the effect of the liquid/solid ratio was not significant, and the pectin was effectively extracted from grapefruit peel (GP) using MW-HPCO2. Additionally, the application of GPP in apricot jam showed that MW-HPCO2-GPP can be used as a thickener in the food industry. The yield and physicochemical properties (ash, protein, galacturonic acid, reducing sugar and methoxyl content, degree of esterification, equivalent weight, color, viscosity) of pectin extracted in the optimum conditions of the MW-HPCO2 method were superior to pectin extracted by the traditional method. The results of this study revealed that MW-HPCO2 could be an innovative green and rapid technique for pectin extraction.

RESUMEN

In this study, drying of grated potato in a hot air-assisted radio frequency system (HA-RF) and the associated effects on the final potato flour quality were studied. The drying behavior of the grated potatoes at different electrode distances (70-90 mm) and sample thickness (2-4 cm) was investigated. The safe drying (without burning tendency) of the maximum amount of sample (1000 g) in a reasonable drying time was carried out at 80 mm of electrode gap and 4 cm of sample thickness. HA-RF drying kinetics were studied and compared with hot air (HA) and radio frequency (RF) (without hot air) drying methods. HA-RF drying increased drying rate and shortened drying time by about 58% and 70% compared to HA and RF drying, respectively. The properties of the final potato flour obtained after HA-RF drying were also compared with those produced by RF, HA, and freeze drying. The flour obtained by HA-RF was superior to RF and HA dried samples with better retention of cellular microstructure and color. The drying method significantly affected the functional properties, thermal characteristics, pasting properties, and other characteristics of potato flours. PRACTICAL APPLICATION: HA-RF as an alternative drying technology was used for the first time to produce potato flour. The functional, thermal, and structural properties of the HA-RF dried product were compared with those dried by HA, RF, and freeze drying. The results of this study ensured very useful information for the use of potato flour obtained by different drying methods in the development of products with specific functional and rheological properties.

Asunto(s)

RESUMEN

Quality characteristics of sulphured and non-sulphured apricots dried with a sequential combined pilot scale solar assisted hot air and hot air assisted radio frequency dryer and conventional sun system were compared. The combined drying approach showed improved color, hardness, antioxidant activity and retention of vitamin C, ß-carotene and total phenolic content values compared to conventional sun drying both for sulphured and non-sulphured samples. The effects of sulphur concentration and addition of pistachio hull extract as a treatment prior to drying were also investigated. Increase in sulphur concentration and addition of extract resulted in considerable quality (with respect to color, Vitamin C, ß-carotene and total phenolic content) increase in apricots. The apricots pretreated with extract had the highest total phenolic content and antioxidant activity. This study demonstrated that combined drying process is an effective drying method for apricots with the better preservation of product quality attributes.

RESUMEN

BACKGROUND: Bulgur bran (BB) is a potential source for the production of value-added products such as fermentable sugars and xylooligosaccharides (XOs). In this study, alkali combined twin-screw extrusion pretreatment was performed and statistically optimized to enhance fractionation and enzymatic hydrolysis of BB. The pretreatment conditions (barrel temperature, screw speed and alkali impregnation) were optimized by Box-Behnken design (BBD) to obtain the highest hemicellulose separation from BB. The obtained fractions were analyzed for the production of fermentable sugars and XOs. RESULTS: The results revealed that twin-screw extrusion of BB performed at 67 °C barrel temperature and 250 rpm screw speed after alkali impregnation at 0.02 g alkali g-1 biomass concentration provided 40.4% higher hemicellulose separation yield compared to the untreated BB. Alkali combined twin-screw extrusion pretreatment increased the enzymatic hydrolysis yield of BB fourfold, whereas a 13-fold increase was achieved after the separation of hemicellulose from pretreated BB. Xylose (X1)-free xylobiose (X2) was the main product after xylanase hydrolysis of hemicellulose fraction. SEM images confirmed the morphological modifications in BB, which were in agreement with the enhanced fractionation performance and the higher enzymatic hydrolysis yield. CONCLUSION: The results of this study suggested that pretreatment by alkali combined twin-screw extrusion followed by alkali extraction could be a reliable and effective process for fractionation of BB and production of fermentable sugars and XOs. © 2022 Society of Chemical Industry.

Asunto(s)

RESUMEN

Conventional hot air and solar energy processes have been used for apricot. These processes had adverse effects on the quality due to the longer process times, and this indicates the need for an innovative approach. Radio frequency (RF) processing has innovation potential for drying with its volumetric heating feature, but an optimal process should be designed for process efficiency in industrial-scale applications. Therefore, the objective of this study was to confirm the RF process for industrial-scale apricot drying. For this purpose, a mathematical model was developed to predict temperature and moisture content change of apricots during drying, and experimental validation study was carried out. For the RF drying process, pre-dried apricots (0.58-0.75 kg water/kg dry matter, db) by solar energy were used. The purpose was to start the RF process at a suitable moisture content level as this process was not feasible to apply directly due to the high initial moisture content of apricots (up to 4 kg water/kg dry matter, db). RF drying experiments were carried out in a 10 kW hot air-assisted (50-60°C) staggered through electrode system. Optimum electrode gap was 81 mm with 2500 V potential of the charged electrode. Final moisture content of the dried apricots was 0.25-0.33 kg water/kg dry matter (db). Following the model validation for temperature and moisture content change, industrial-scale apricot drying scenarios were demonstrated to confirm the RF process for feasibility and process design. PRACTICAL APPLICATION: A comprehensive mathematical model was developed for radio frequency (RF) drying of apricots. This model was experimentally validated with respect to the temperature and moisture content change. Various process design studies were carried out for an industrial-scale apricot drying process to confirm the process feasibility. With this background, the results of this study can be directly used in an industrial drying for an optimal process design and energy efficiency.

Asunto(s)