RESUMEN
We calibrate the lateral mode AFM (LFM) by determining the position-sensitive photodetector (PSPD) signal dependency on the lateral tip displacement, which is analogous to the constant-compliance region in normal-force calibration. By stick-slip on stiff, amorphous surfaces (silica or glass), the lateral tip displacement is determined accurately using the feedback loop control of AFM system. The sufficiently high contact stiffness between the Si AFM tip and stiff, amorphous surfaces substantially reduces the error of PSPD signal dependency on the lateral tip displacement. No damage or modification of the AFM probe is involved and only a clean silicon or glass wafer is needed.
RESUMEN
This paper describes a novel method to fabricate porous graphene oxide (PGO) from GO by exposure to oxygen plasma. Compared to other methods to fabricate PGO described so far, e.g. the thermal and steam etching methods, oxygen plasma etching method is much faster. We studied the development of the porosity with exposure time using atomic force microscopy (AFM). It was found that the development of PGO upon oxygen-plasma exposure can be controlled by tapping mode AFM scanning using a Si tip. AFM tapping stalls the growth of pores upon further plasma exposure at a level that coincides with the fraction of sp2 carbons in the GO starting material. We suggest that AFM tapping procedure changes the bond structure of the intermediate PGO structure, and these stabilized PGO structures cannot be further etched by oxygen plasma. This constitutes the first report of tapping AFM as a tool for local mechano-chemistry.
RESUMEN
We analyze a near-second-order transition occurring in solutions of living polymers confined by two parallel surfaces in equilibrium with a reservoir solution. The molecular self-consistent field theory in the regime of weak adsorption or depletion is mapped to phenomenological Landau theory, where the order parameter is the average degree of polymerization or, equivalently, the normalized chain-end concentration. The distance between two surfaces at which the transition occurs scales as â(c)(2)|c| where â(c) is the correlation length of the polymer solution in the reservoir and c(-1) is de Gennes adsorption length. In the second half of the paper we focus on experimentally observable features. The predicted transition can be detected experimentally by probing the living-polymer mediated disjoining potential between surfaces by means of, e.g., colloidal probe atomic force microscopy. To facilitate experimental investigations we derive simple explicit expressions for the disjoining potential for several regimes. By comparison with full numerical calculations it was verified that these are quite accurate.
RESUMEN
The surface tension between the hydrophobic core and the solvent is known to play a major role in the self-assembly of diblock copolymer micelles in solution. Coulombic forces are also very important in the case of aggregates with weakly charged coronas. The aggregation number and morphology are often tuned by the addition of electrolytes to the solution via electrostatic screening and an eventual change in solvent quality. However, when the surface tension is low enough, dielectric discontinuity between the core and the solvent becomes important enough in comparison to other mechanisms, driving the surface tension at the same time it screens electrostatic interactions in the corona. Below, we demonstrate the importance of this effect for micelles with neutral and weakly charged coronas.
RESUMEN
Hydrogels play an important role in macroscale delivery systems by enabling the transport of cells and molecules. Here we present a facile and benign method to prepare a dextran-based hydrogel (Dex-sHSA) using human serum albumin (HSA) as a simultaneous drug carrier and covalent cross-linker. Drug binding affinity of the albumin protein was conserved in the thiolation step using 2-iminothiolane and subsequently, in the in situ gelation step. Oscillation rheometry studies confirmed the formation of a three-dimensional viscoelastic network upon reaction of dextran and the HSA protein. The mechanical properties of Dex-sHSA hydrogel can be tuned by the protein concentration, and the degree of thiolation of sHSA. Sustained release of hydrophobic drugs, such as ibuprofen, paclitaxel and dexamethasone, from the Dex-sHSA network was shown over one week. Hence, this albumin-based dextran hydrogel system demonstrates its potential as a macroscale delivery system of hydrophobic therapeutics for a wide range of biomedical applications.
Asunto(s)
Dextranos/química , Portadores de Fármacos/química , Hidrogeles/química , Albúmina Sérica/química , Dexametasona/química , Ácido Ditionitrobenzoico/química , Liberación de Fármacos , Humanos , Ibuprofeno/química , Paclitaxel/químicaRESUMEN
We present predictions on the equilibrium behavior of solutions of living polymers confined in a gap between surfaces, including the ensuing potential of mean force between those surfaces (the disjoining potential). We highlight the occurrence of a transition upon narrowing the gap, which arises from a cooperative simultaneous increase of the local density and degree of polymerization. At this transition, many properties of the confined solution, including the disjoining potential, change by orders of magnitude over a minute change of the surface separation. These results were obtained owing to two extensions to a previously introduced self-consistent field-propagator formalism. (i) We derive this formalism from a free-energy functional of the distribution of chain lengths and configurations. This enables evaluation of thermodynamic properties, including the disjoining potential. (ii) We solved for a system confined between two surfaces.
RESUMEN
The fusion of lipid membranes is essential for the delivery of chemicals across biological barriers to specific cellular locations. Intracellular membrane fusion is particularly precise and is critically mediated by SNARE proteins. To allow membrane fusion to be better understood and harnessed we have mimicked this important process with a simple bottom-up model in which synthetic fusogens replicate the essential features of SNARE proteins. In our fusogens, the coiled-coil molecular recognition motif of SNARE proteins is replaced by the coiled-coil E/K peptide complex, which is one-ninth the size. The peptides are anchored in liposome membranes via pegylated lipids. Here we discuss how the liposome fusion process is controlled by different parameters within the minimal model. The lipopeptide fusogens form specific coiled coils that dock liposomes together, resulting in the merging of membranes via the stalk intermediate. Unusually for model systems, the lipopeptides can rapidly lead to fusion of entire liposome populations and the liposomes can undergo many rounds of fusion. The rate and extent of fusion and the number of fusion rounds can be manipulated by adjusting the fusogen and liposome concentrations. For example, these parameters can be tuned such that tens of thousands of â¼100 nm liposomes fuse into a single giant liposome â¼10 µm in diameter; alternatively, conditions can be selected such that only two liposomes fuse. The improved understanding of membrane fusion shows how application-specific fusion attributes can be achieved, and paves the way for controlled nanoreactor mixing and controlled delivery of cargo to cells.
RESUMEN
The formation of a noncovalent triblock copolymer based on a coiled-coil peptide motif is demonstrated in solution. A specific peptide pair (E and K) able to assemble into heterocoiled coils was chosen as the middle block of the polymer and conjugated to poly(ethylene glycol) (PEG) and polystyrene (PS) as the outer blocks. Mixing equimolar amounts of the polymer-peptide block copolymers PS-E and K-PEG resulted in the formation of coiled-coil complexes between the peptides and subsequently in the formation of the amphiphilic triblock copolymer PS-E/K-PEG. Aqueous self-assembly of the separate peptides (E and K), the block copolymers (PS-E and K-PEG), and equimolar mixtures thereof was studied by circular dichroism, dynamic light scattering, and cryogenic transmission electron microscopy. It was found that the noncovalent PS-E/K-PEG copolymer assembled into rodlike micelles, while in all other cases, spherical micelles were observed. Temperature-dependent studies revealed the reversible nature of the coiled-coil complex and the influence of this on the morphology of the aggregate. A possible mechanism for these transitions based on the interfacial free energy and the free energy of the hydrophobic blocks is discussed. The self-assembly of the polymer-peptide conjugates is compared to that of polystyrene-b-poly(ethylene glycol), emphasizing the importance of the coiled-coil peptide block in determining micellar structure and dynamic behavior.