RESUMEN

Indium gallium nitride (InGaN)-based micro-LEDs (µLEDs) are suitable for meeting ever-increasing demands for high-performance displays owing to their high efficiency, brightness and stability1-5. However, µLEDs have a large problem in that the external quantum efficiency (EQE) decreases with the size reduction6-9. Here we demonstrate a blue InGaN/GaN multiple quantum well (MQW) nanorod-LED (nLED) with high EQE. To overcome the size-dependent EQE reduction problem8,9, we studied the interaction between the GaN surface and the sidewall passivation layer through various analyses. Minimizing the point defects created during the passivation process is crucial to manufacturing high-performance nLEDs. Notably, the sol-gel method is advantageous for the passivation because SiO2 nanoparticles are adsorbed on the GaN surface, thereby minimizing its atomic interactions. The fabricated nLEDs showed an EQE of 20.2 ± 0.6%, the highest EQE value ever reported for the LED in the nanoscale. This work opens the way for manufacturing self-emissive nLED displays that can become an enabling technology for next-generation displays.

RESUMEN

A series of well-defined poly(oxy(11-phosphorylcholineundecylthiomethyl)ethylene-ran-oxy(n-dodecylthiomethyl)ethylene) (PECH-PCm: m = 0-100 mol% phosphorylcholine (PC)) polymers were used to prepare nanoscale thin films that were characterized by synchrotron X-ray reflectivity (XR) analysis. The quantitative XR analysis provided structural insights into the PECH-PCm thin films. The PECH-PC0 polymer film formed a well-ordered in-plane oriented molecular multibilayer structure, whose individual layers consisted of two sublayers. One sublayer was composed of the fully extended backbones and inner part of the bristles, exhibiting a relatively low electron density, whereas the other sublayer was composed of a bilayer of the outer parts of the bristles without interdigitation. The PECH-PC100 polymer film also formed a well-ordered in-plane oriented molecular multibilayer structure, the individual layers of which were composed of four sublayers rather than two. The bristles in the layer were interdigitated in part via the zwitterionic interactions of the PC end groups. Surprisingly, regardless of the copolymer composition, the PECH-PCm random copolymer molecules in the thin films self-assembled to form a multilayered structure that resembled the structure formed by the PECH-PC100 polymer. These properties have not been observed in other conventional random brush copolymer films. The remarkable multibilayer structures originated from the zwitterionic PC end groups and their favorable interactions and interdigitated structures, which overcame any negative contributions caused by the heterogeneity of the bristles. The unique self-assembly properties of the PECH-PCm polymers always provide a PC-rich surface. The PECH-PCm random copolymers successfully mimicked the molecular bilayer structures formed by natural lipids.

RESUMEN

An asymmetric nine-arm star polymer, (polystyrene)3-(poly(4-methoxystyrene))3-(polyisoprene)3 (PS3-PMOS3-PI3) was synthesized, and the details of the structures of its thin films were successfully investigated for the first time by using in situ grazing incidence X-ray scattering (GIXS) with a synchrotron radiation source. Our quantitative GIXS analysis showed that thin films of the star polymer molecules have very complex but highly ordered and preferentially in-plane oriented hexagonal (HEX) structures consisting of truncated PS cylinders and PMOS triangular prisms in a PI matrix. This HEX structure undergoes a partial rotational transformation process at temperatures above 190 °C that produces a 30°-rotated HEX structure; this structural isomer forms with a volume fraction of 23% during heating up to 220 °C and persists during subsequent cooling. These interesting and complex self-assembled nanostructures are discussed in terms of phase separation, arm number, volume ratio, and confinement effects.

RESUMEN

Two new brush polyoxyethylenes bearing thymine moieties at the bristle ends have been synthesized as model polymers in which the chemical loading of the thymine functional group into the polymer is maximized: poly(oxy(11-thyminoacetyloxyundecylthiomethyl)ethylene) (PECH(S)-T) and poly(oxy(11-thyminoacetyloxyundecylsulfonylmethyl)ethylene) (PECH(SO(2))-T). These brush polymers are thermally stable up to around 225 °C, and their glass transitions occur in the range 23-27 °C, but they have significantly different properties despite the similarity of their chemical structures. In particular, PECH(SO(2))-T films exhibit better performance in sensing mercury ions than PECH(S)-T films. These differences were found to originate in the differences between their morphological structures. The PECH(SO(2))-T film has a multi-bilayer structure without interdigitation, in which the layers stack along the out-of-plane of the film and provide a thymine-rich surface. In contrast, the PECH(S)-T film is amorphous with a relatively low population of thymine moieties at the surface. This study demonstrated that a thymine-rich surface is required for recyclable thymine-based polymers to provide highly improved sensitivity and selectivity as well as full reversibility in the sensing of mercury ions. A thymine-rich surface can be achieved with a brush polymer bearing thymine moieties that can self-assemble into a multi-bilayer structure. Because of the thymine-rich surface, the PECH(SO(2))-T thin films even in only 6 nm thickness demonstrate the detection of mercury ions in aqueous solutions with a detection limit of 10(-6) M.

RESUMEN

Two new DNA-mimicking brush polymers were synthesized: poly[oxy(11-(3-(9-adeninyl)propionato)-undecanyl-1-thiomethyl)ethylene] (PECH-AP) and poly[oxy(11-(5-(9-adenylethyloxy)-4-oxopentanoato)undecanyl-1-thiomethyl)ethylene] (PECH-AS). These polymers were found to be thermally stable up to 220 °C and could be applied easily by conventional coating processes to produce good quality films. Interestingly, both brush polymers formed molecular multibilayer structures to provide an adenine-rich surface. Despite the structural similarities, PECH-AS surprisingly exhibited higher hydrophilicity and better water sorption properties than PECH-AP. These differences were attributed to the chemical structures in the bristles of the polymers. The adenine-rich surfaces of the polymer films demonstrated selective protein adsorption, suppressed bacterial adherence, facilitated HEp-2 cell adhesion, and exhibited good biocompatibility in mice. However, the high hydrophilicity and good water sorption characteristics of the PECH-AS film suggest that this brush polymer is better suited to applications requiring good biocompatibility and reduced chance of bacterial infection compared with the PECH-AP film.

Asunto(s)

RESUMEN

New mesoporous silicate-titania resin systems hybridized with 4,5-dihydroxy-m-benzenedisulfonic acid and poly(ethylene glycol)-dimethacrylate component were developed. These inorganic-organic hybrid resins were found to reveal highly controlled ionic and hydrophilic surface with excellent durability and adhesion onto various substrates. The resin films revealed high resistance to nonspecific adsorption of fibrinogen and to adherence by several bacterial pathogens such as Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis and Enterococcus faecalis. Furthermore, excellent biocompatibility of the developed resins was proved by both HEp-2 cell adhesion in vitro and subcutaneous implantation in mice. The inorganic-organic hybrid resins are strongly promising for biomedical applications including biomedical devices and biosensors.

Asunto(s)