RESUMEN

Gas-phase ion/molecule reactions have been used extensively for the structural elucidation of organic compounds in tandem mass spectrometry. Reagents for ion/molecule reactions can be introduced into a mass spectrometer via a continuous flow apparatus or through a pulsed inlet system. However, most of these approaches enable the use of only a single reagent at a time. In this work, a multichannel pulsed-valve inlet system was developed for the rapid consecutive introduction of up to nine different reagents or reagent systems into a linear quadrupole ion trap mass spectrometer for diagnostic gas-phase ion/molecule reactions. Automated triggering of the pulsed valves enabled these experiments to be performed on the high-performance liquid chromatography (HPLC) time scale. This enables high-throughput screening of several functionalities in analytes as they elute from an HPLC column.

RESUMEN

Unexpectedly, the 5-dehydroquinoline radical cation was formed in the gas phase from the 5-iodo-8-nitroquinolinium cation upon ion-trap collision-activated dissociation. This reaction involves the cleavage of a nitro group to generate an intermediate monoradical, namely, the 8-dehydro-5-iodoquinolinium cation, followed by rearrangement through abstraction of a hydrogen atom from the protonated nitrogen atom by the radical site. Dissociation of the rearranged radical cation through elimination of an iodine atom generates the 5-dehydroquinoline radical cation. The mechanism was probed by studying isomeric biradicals and performing quantum chemical calculations. The 5-dehydroquinoline radical cation showed greater gas-phase reactivity toward dimethyl disulfide, cyclohexane, and allyl iodide than the isomeric 5,8-didehydroquinolinium cation, which is more reactive than the isomeric 5,8-didehydroisoquinolinium cation studied previously. All three isomers have a 1,4-biradical topology. The order of reactivity is rationalized by the vertical electron affinities of the radical sites of these biradicals instead of their widely differing singlet-triplet splittings.

RESUMEN

We report herein a gas-phase reactivity study on a para-benzyne cation and its three cyano-substituted, isomeric derivatives performed using a dual-linear quadrupole ion trap mass spectrometer. All four biradicals were found to undergo primary and secondary radical reactions analogous to those observed for the related monoradicals, indicating the presence of two reactive radical sites. The reactivity of all biradicals is substantially lower than that of the related monoradicals, as expected based on the singlet ground states of the biradicals. The cyano-substituted biradicals show substantially greater reactivity than the analogous unsubstituted biradical. The greater reactivity is rationalized by the substantially greater (calculated) electron affinity of the radical sites of the cyano-substituted biradicals, which results in stabilization of their transition states through polar effects. This finding is in contrast to the long-standing thinking that the magnitude of the singlet-triplet splitting controls the reactivity of para-benzynes.

RESUMEN

Existing liquid chromatography - mass spectrometry method for the analysis of short chain carboxylic acids was expanded and validated to cover also the measurement of glycerol from oils and fats. The method employs chloride anion attachment and two ions, [glycerol+35Cl]- and [glycerol+37Cl]-, as alternative quantifiers for improved selectivity of glycerol measurement. The averaged within run precision, between run precision and accuracy ranged between 0.3-7%, 0.4-6% and 94-99%, respectively, depending on the analyte ion and sample matrix. Selected renewable diesel feedstocks were analyzed with the method.

Asunto(s)

RESUMEN

Direct infusion atmospheric pressure chemical ionization mass spectrometry (APCI-MS) was compared to field ionization mass spectrometry (FI-MS) for the determination of hydrocarbon class distributions in lubricant base oils. When positive ion mode APCI with oxygen as the ion source gas was employed to ionize saturated hydrocarbon model compounds (M) in hexane, only stable [M - H]+ ions were produced. Ion-molecule reaction studies performed in a linear quadrupole ion trap suggested that fragment ions of ionized hexane can ionize saturated hydrocarbons via hydride abstraction with minimal fragmentation. Hence, APCI-MS shows potential as an alternative of FI-MS in lubricant base oil analysis. Indeed, the APCI-MS method gave similar average molecular weights and hydrocarbon class distributions as FI-MS for three lubricant base oils. However, the reproducibility of APCI-MS method was found to be substantially better than for FI-MS. The paraffinic content determined using the APCI-MS and FI-MS methods for the base oils was similar. The average number of carbons in paraffinic chains followed the same increasing trend from low viscosity to high viscosity base oils for the two methods.

RESUMEN

RATIONALE: The chemistry of desulfurization involved in processing crude oil is greatly dependent on the forms of sulfur in the oil. Sulfur exists in different chemical bonding environments in fossil fuels, including those in thiophenes and benzothiophenes, thiols, sulfides, and disulfides. In this study, the fragmentation behavior of the molecular ions of 17 aromatic organosulfur compounds with various functionalities was systematically investigated by using high-resolution tandem mass spectrometry. METHODS: Multiple-stage tandem mass spectrometric experiments were carried out using a linear quadrupole ion trap (LQIT) equipped with an atmospheric pressure chemical ionization (APCI) source. (+)APCI/CS2 was used to generate stable dominant molecular ions for all the compounds studied except for three sulfides that also showed abundant fragment ions. The LQIT coupled with an orbitrap mass spectrometer was used for elemental composition analysis, which facilitated the identification of the neutral molecules lost during fragmentation. RESULTS: The characteristic fragment ions generated in MS(2) and MS(3) experiments provide clues for the chemical bonding environment of sulfur atoms in the examined compounds. Upon collision-induced dissociation (CID), the molecular ions can lose the sulfur atom in a variety of ways, including as S (32 Da), HS(•) (33 Da), H2 S (34 Da), CS (44 Da), (•) CHS (45 Da) and CH2 S (46 Da). These neutral fragments are not only indicative of the presence of sulfur, but also of the type of sulfur present in the compound. Generally, losses of HS(•) and H2 S were found to be associated with compounds containing saturated sulfur functionalities, while losses of S, CS and (•) CHS were more common for heteroaromatic sulfur compounds. CONCLUSIONS: High-resolution tandem mass spectrometry with APCI/CS2 ionization is a viable approach to determining the types of organosulfur compounds. It can potentially be applied to analysis of complex mixtures, which is beneficial to improving the desulfurization process of fossil fuels. Copyright © 2016 John Wiley & Sons, Ltd.