RESUMEN
This study presents an original approach on how to generate a radiator with an emissivity less than one by using a conventional blackbody and a screen with a defined area density of holes. This is needed for the calibration of infrared (IR) radiometry, which is a very useful form of temperature measurement in industrial, scientific, and medical applications. One of the major sources of errors in IR radiometry is the emissivity of the surface being measured. Emissivity is a physically well-defined parameter, but in real experiments, it may be influenced by many factors: surface texture, spectral properties, oxidation, and aging of surfaces. While commercial blackbodies are prevalent, the much-needed grey bodies with a known emissivity are unavailable. This work describes a methodology for how to calibrate radiometers in the lab or in the factory or FAB using the "screen approach" and a novel thermal sensor dubbed Digital TMOS. The fundamental physics required to appreciate the reported methodology is reviewed. The linearity in emissivity of the Digital TMOS is demonstrated. The study describes in detail how to obtain the perforated screen as well as how to do the calibration.
RESUMEN
A novel uncooled thermal sensor based on a suspended transistor, fabricated in standard CMOS-SOI process, and released by dry etching, dubbed Digital TMOS, has been developed. Using the transistor as the sensing element has advantages in terms of internal gain, low power, low-cost technology, and high temperature sensitivity. A two channel radiometer, based on the new nano-metric CMOS-SOI-NEMS Technology, enables remote temperature sensing as well as emissivity sensing of the forehead and body temperatures of people, with high accuracy and high resolution. Body temperature is an indicator of human physiological activity and health, especially in pediatrics, surgery, and general emergency departments. This was already recognized in past pandemics such as SARS, EBOLA, and Chicken Flu. Nowadays, with the spread of COVID-19, forehead temperature measurements are used widely to screen people for the illness. Measuring the temperature of the forehead using remote sensing is safe and convenient and there are a large number of available commercial instruments, but studies show that the measurements are not accurate. The surface emissivity of an object has the most significant effect on the measured temperature by IR remote sensing. This work describes the achievements towards high-performance, low-cost, low power, mobile radiometry, to rapidly screen for fever to identify victims of the coronavirus (COVID-19). The main two aspects of the innovation of this study are the use of the new thermal sensor for measurements and the extensive modeling of this sensor.
RESUMEN
There is an ongoing effort to fabricate miniature, low-cost, and sensitive thermal sensors for domestic and industrial uses. This paper presents a miniature thermal sensor (dubbed TMOS) that is fabricated in advanced CMOS FABs, where the micromachined CMOS-SOI transistor, implemented with a 130-nm technology node, acts as a sensing element. This study puts emphasis on the study of electromagnetic absorption via the vacuum-packaged TMOS and how to optimize it. The regular CMOS transistor is transformed to a high-performance sensor by the micro- or nano-machining process that releases it from the silicon substrate by wafer-level processing and vacuum packaging. Since the TMOS is processed in a CMOS-SOI FAB and is comprised of multiple thin layers that follow strict FAB design rules, the absorbed electromagnetic radiation cannot be modeled accurately and a simulation tool is required. This paper presents modeling and simulations based on the LUMERICAL software package of the vacuum-packaged TMOS. A very high absorption coefficient may be achieved by understanding the physics, as well as the role of each layer.
RESUMEN
This is a second part of the paper presenting a miniature, combustion-type gas sensor (dubbed GMOS) based on a novel thermal sensor (dubbed TMOS). The TMOS is a micromachined CMOS-SOI transistor, which acts as the sensing element and is integrated with a catalytic reaction plate, where ignition of the gas takes place. Part 1 focused on the chemical and technological aspects of the sensor. In part 2, the emphasis is on the physical aspects of the reaction micro-hot plate on which the catalytic layer is deposited. The three main challenges in designing the hot plate are addressed: (i) How to design a hot plate operating in air, with a low thermal conductivity; (ii) how to measure the temperature of the hot plate during operation; (iii) how to reduce the total consumed power during operation. Reported simulated as well as analytical models and measured results are in good agreement.
RESUMEN
Localized surface plasmons-polaritons represent collective behavior of free electrons confined to metal particles. This effect may be used for enhancing efficiency of solar cells and for other opto-electronic applications. Plasmon resonance strongly affects optical properties of ultra-thin, island-like, metal films. In the present work, the Finite Difference Time Domain (FDTD) method is used to model transmittance spectra of thin gold island films grown on a glass substrate. The FDTD calculations were performed for island structure, corresponding to the Volmer-Weber model of thin film growth. The proposed simulation model is based on fitting of experimental data on nanostructure of ultra-thin gold films, reported in several independent studies, to the FDTD simulation setup. The results of FDTD modeling are then compared to the experimentally measured transmittance spectra of prepared thin gold films and found to be in a good agreement with experimental data.