RESUMEN
Scaffolds for bone tissue regeneration should provide the right cues for stem cell adhesion and proliferation, but also lead to their osteogenic differentiation. Hydrogels of modified platelet lysates (PLMA) show the proper mechanical stability for cell encapsulation and contain essential bioactive molecules required for cell maintenance. We prepared a novel PLMA-based nanocomposite for bone repair and regeneration capable of releasing biofactors to induce osteogenic differentiation. Human bone marrow-derived mesenchymal stem cells (hBM-MSCs) were encapsulated in PLMA hydrogels containing bioactive mesoporous silica nanoparticles previously loaded with dexamethasone and functionalized with calcium and phosphate ions. After 21 d of culture, hBM-MSCs remained viable, presented a stretched morphology, and showed signs of osteogenic differentiation, namely the presence of significant amounts of alkaline phosphatase, bone morphogenic protein-2 and osteopontin, hydroxyapatite, and calcium nodules. Developed for the first time, PLMA/MSNCaPDex nanocomposites were able to guide the differentiation of hBM-MSCs without any other osteogenic supplementation.
RESUMEN
Mesoporous silica nanoparticles (MSNs) are excellent nanocarriers, featuring very high cargo capacity due to their large surface area and pore volume. The particle and pore dimensions can be accurately tuned, and both the internal and external surfaces allow versatile functionalization. We developed hybrid MSNs with diameters around 140 nm, with the external surface selectively modified with a temperature-responsive biocompatible copolymer to control cargo release. The nanoparticles feature either a polymer brush or a gel-like responsive shell, produced by grafting from RAFT polymerization of PEG-acrylate macromonomers. The hybrid nanoparticles have fluorescent molecules incorporated into the inorganic network providing excellent optical properties for traceability and imaging. The cargo release profiles are explained by a temperature-controlled "pumping" mechanism: at low temperature (ca. 20 °C) the polymer shell is hydrophilic and expanded, opposing cargo diffusion out of the shell and retaining the molecules released from the mesopores; above room temperature (ca. 40-50 °C) the polymer network becomes more hydrophobic and collapses onto the silica surface, releasing the cargo by a sponge-like squeezing effect. The release kinetics depends on the polymer shell type, with better results obtained for the gel-coated nanoparticles. Our proof-of-concept system shows that by modulating the temperature, it is possible to achieve a pumping regime that increases the release rate in a controlled way.
Asunto(s)
Preparaciones de Acción Retardada , Portadores de Fármacos/química , Nanopartículas/química , Dióxido de Silicio , PolímerosRESUMEN
Functionalized polymer nanoparticles react and store molecular oxygen for several weeks in the form of endoperoxides. On-demand controlled release of singlet oxygen by the particles is achieved by thermolysis.
Asunto(s)
Antracenos/química , Nanopartículas/química , Polímeros/química , Oxígeno Singlete/química , Preparaciones de Acción Retardada/química , Luz , Azul de Metileno/química , Azul de Metileno/efectos de la radiación , Microscopía Electrónica de Rastreo , Nanopartículas/ultraestructura , Fármacos Fotosensibilizantes/química , Fármacos Fotosensibilizantes/efectos de la radiación , Espectrometría de FluorescenciaRESUMEN
We have synthesized anionic multistimuli responsive core-shell polymer nanoparticles with low size dispersity composed of glassy poly(methyl methacrylate) (PMMA) cores of ca. 40 nm radius and poly(N-isopropylacrylamide) (PNIPAM) anionic brush-like shells with methacrylic acid comonomers. Using dynamic light scattering, we observed a volume phase transition upon an increase in temperature and this response was pH and ionic strength dependent. Already at room temperature we observed a pronounced polyelectrolyte effect, that is, a shift of the apparent pKa extracted from the degree of dissociation of the acids as a function of the pH. The multiresponsive behavior of the hydrophobic polyelectrolyte brush has been modeled using the Scheutjens-Fleer self-consistent field (SF-SCF) approach. Using a phenomenological relation between the Flory-Huggins χ parameter and the temperature, we confront the predicted change in the brush height with the observed change of the hydrodynamic radius and degree of dissociation and obtain estimates for the average chain lengths (number of Kuhn segments) of the corona chains, the grafting density and charge density distributions. The theory reveals a rich internal structure of the hydrophobic polyelectrolyte brush, especially near the collapse transition, where we find a microphase segregated structure. Considering this complexity, it is fair to state that the theoretical predictions follow the experimental data semiquantitatively, and it is attractive to attribute the observed disparity between theory and experiments to the unknown polydispersity of the chains, the unknown distribution of the charges, or other experimental complications. More likely, however, the deviations point to significant problems of the mean field theory, which focuses solely on the radial distributions and ignores the possibility of the formation of lateral (local) inhomogeneities in partially collapsed polyelectrolyte brushes. We argue that the PNIPAM brush at room temperature is already behaving nonideally.
Asunto(s)
Resinas Acrílicas/química , Modelos Moleculares , Nanopartículas/química , Agua/química , Concentración de Iones de Hidrógeno , Iones , Transición de Fase , Potenciometría , TemperaturaRESUMEN
We prepared anionic multistimuli responsive core-shell polymer nanoparticles with very low size dispersity. By using either acrylic acid (AA) or methacrylic acid (MA) as a comonomer in the poly(N-isopropyl acrylamide) (PNIPAM) shell, we are able to change the distribution of negative charges in the nanoparticle shell. The particle size, volume phase transition temperature, and aggregation state can be modulated using temperature, pH, or ionic strength, providing a very versatile platform for applications in sensors, medical diagnostics, environmental remediation, etc. The nanoparticles have a glassy poly(methyl methacrylate) (PMMA) core of ca. 40 nm radius and a cross-linked PNIPAM anionic shell with either AA or MA comonomers. The particles, p(N-AA) and p(MA-N), respectively, have the same total charge but different charge distributions. While the p(MA-N) particles have the negative charges preferentially distributed toward the inner shell, in the case of the p(N-AA) particles the charge extends more to the particle outer shell. The volume phase transition temperature (T(VPT)) of the particles is affected by the charge distribution and can be fine-tuned by controlling the electrostatic repulsion on the particle shell (using pH and ionic strength). By suppressing the particle charge we can also induce temperature-driven particle aggregation.
RESUMEN
We present a study of chain interdiffusion in films formed by specially architectured PBMA nanoparticles by Förster Resonance Energy Transfer -FRET. Polymer nanoparticles contained linear chains with narrower molecular weight distributions than other previous reports, allowing a more detailed study. Apparent fractions of mixing and diffusion coefficients, determined from the quantum efficiency of energy transfer, were used to characterize the interdiffusion mechanism in the different films. The resistance of the films to dissolution by a good solvent was finally correlated with the interdiffusion results, in order to get information about film healing. We concluded that whenever interdiffusion occurs between nanoparticles containing linear chains and fully cross-linked nanoparticles, healing becomes more effective in spite of showing slower interdiffusion. We also observed that particles with longer chains are more effective for film healing. Finally, we concluded that interdiffusion occurs both ways across interfaces in blends formed by particles swollen with linear chains of different molecular weights.
RESUMEN
We prepared water dispersions of poly(n-butyl methacrylate-st-butyl acrylate) crosslinked core-shell nanoparticles functionalized with different amounts of trimethoxisilane (TMS) groups in the outer shell. The purpose of the TMS groups is to chemically bind the rubbery particles to a nanostructured silica network, using sol-gel copolymerization. Here, we present nanoparticles containing 13 mol % and 30 mol % of TMS groups in the outer shell and compare their surface morphology with particles that do not contain TMS. The particles are prepared by a two-step seeded emulsion polymerization technique at neutral pH. In the first step, we obtained crosslinked seed particles (44 nm in diameter) by a batch process. In the second step, we used a semi-continuous emulsion polymerization technique under starved feed conditions to obtain monodispersed particles of controlled composition and size (ca. 100 nm in diameter). Fluorescence decay measurements were performed in situ on the dispersions, using a pair of cationic dyes adsorbed onto the surface of the nanoparticles: rhodamine 6G as the energy transfer donor and malachite green carbinol hydrochloride as the acceptor. The kinetics of Förster resonance energy transfer (FRET) between the dyes is sensitive to the donor-acceptor distance, allowing us to obtain the binding distribution of the dyes at the nanoparticle surface. For the unmodified nanoparticles, we found a dye distribution that corresponds to an average interface thickness of delta = (5.2 +/- 0.2) nm. For the samples containing 13 mol % and 30 mol % of TMS groups in the outer shell we obtained broader interfaces, with widths of delta = (6.2 +/- 0.2) nm and delta = (6.5 +/- 0.1) nm respectively. This broadening of the distribution with the surface modification is interpreted in terms of the increase in free volume of the shell caused by the TMS groups. Finally, we studied the effect of temperature on the water-polymer interface fuzziness, in order to evaluate the accessibility of the TMS groups during the sol-gel synthesis of nanostructured hybrid materials.
RESUMEN
The behavior of a poly(N,N-dimethylacrylamide) hydrophobically modified by incorporating 0.33 mol % of a pyrenyl derivative, [4-(1-pyrenyl)butyl]amine hydrochloride (PY) and 3.56 mol % of dodecylamine (DO) has been studied at the air/water interface. Surface pressure-area isotherm measurements show that the film is initially anchored by the hydrophobic groups at the air-water interface with a pancake-like structure and, with increasing surface pressure, evolves to a quasi mushroom structure, finally reaching a brush configuration at high pressures. Monolayers of this polymer were transferred to silica substrates using the Langmuir-Blodgett (LB) technique at 5, 15, and 25 mN.m(-1). The properties of the LB films were studied by steady-state and time-resolved fluorescence as well as by atomic force microscopy. The results show that the aggregates formed at low pressures are disrupted by pressure increase, while the water-soluble poly(N,N-dimethylacrylamide) becomes dissolved in the water subphase.