Edge chipping resistance of ceramics bonded to a dentine analogue.
J Mech Behav Biomed Mater
; 90: 587-590, 2019 02.
Article
em En
| MEDLINE
| ID: mdl-30481688
OBJECTIVE: To evaluate the edge chip resistance (ReA) of two CAD/CAM monolithic ceramics (GC- IPS e.max CAD and YZ- Zenostar Zr Translucent) bonded to a dentine analogue substrate (G10- NEMA G10). METHODS: Plate-shaped specimens were prepared from GC and YZ ceramics and were either bonded (B) to G10 or attached (NB) to a universal testing machine for edge chipping test. Samples from all groups (GC-B, GC-NB, YZ-B and YZ-NB) were indented (n = 25) at different edge distances (d = 0.1, 0.2, 0.3, 0.4, 0.5 and 0.6 mm) to produce chips. Force (F, in N) and d values were recorded and ReA (in N/mm) were calculated. Data were statistically analyzed using Pearson´s correlation, Student t, ANOVA and Tukey tests (α = 0.05). RESULTS: A strong correlation (R ≥ 0.98) was found between F and d values for all groups. ReA values increased with increasing d, irrespective of ceramic type (GC and YZ) or fixation method (B and NB). Significant differences (p < 0.05) in mean ReA values were found between B and NB ceramics at lower d (0.1-0.3 mm) that did not persist (p > 0.05) at greater d (0.5 and 0.6 mm), meaning, bonding (B) to G10 protected both materials against chipping close to the edge. CONCLUSIONS: The larger the distance from the occlusal contact to the restoration edge, the greater the chance to avoid ceramic chipping in monolithic restorations. For d ≤ 0.3 mm, such F vs d relation is less critical for edge resistance of YZ and for resin bonded monolithic ceramics.
Palavras-chave
Texto completo:
1
Coleções:
01-internacional
Base de dados:
MEDLINE
Assunto principal:
Cerâmica
/
Dentina
/
Fenômenos Mecânicos
Idioma:
En
Revista:
J Mech Behav Biomed Mater
Assunto da revista:
ENGENHARIA BIOMEDICA
Ano de publicação:
2019
Tipo de documento:
Article
País de afiliação:
Brasil
País de publicação:
Holanda