Corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloys in different storage environments.
J Prosthet Dent
; 84(3): 274-9, 2000 Sep.
Article
em En
| MEDLINE
| ID: mdl-11005899
STATEMENT OF PROBLEM: Removable partial dentures are affected by fatigue because of the cyclic mechanism of the masticatory system and frequent insertion and removal. Titanium and its alloys have been used in the manufacture of denture frameworks; however, preventive agents with fluorides are thought to attack titanium alloy surfaces. PURPOSE: This study evaluated, compared, and analyzed the corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloy in different storage environments. MATERIAL AND METHODS: For each metal, 33 dumbbell rods, 2.3 mm in diameter at the central segment, were cast in the Rematitan system. Corrosion-fatigue strength test was carried out through a universal testing machine with a load 30% lower than the 0.2% offset yield strength and a combined influence of different environments: in air at room temperature, with synthetic saliva, and with fluoride synthetic saliva. After failure, the number of cycles were recorded, and fracture surfaces were examined with an SEM. RESULTS: ANOVA and Tukey's multiple comparison test indicated that Ti-6Al-4V alloy achieved 21,269 cycles (SD = 8,355) against 19,157 cycles (SD = 3, 624) for the commercially pure Ti. There were no significant differences between either metal in the corrosion-fatigue life for dry specimens, but when the solutions were present, the fatigue life was significantly reduced, probably because of the production of corrosion pits caused by superficial reactions.
Buscar no Google
Coleções:
01-internacional
Base de dados:
MEDLINE
Assunto principal:
Titânio
/
Ligas Dentárias
Idioma:
En
Revista:
J Prosthet Dent
Ano de publicação:
2000
Tipo de documento:
Article
País de afiliação:
Brasil
País de publicação:
Estados Unidos